1 /* 2 * Copyright (C) 2007 Freescale Semiconductor, Inc. 3 * Dave Liu <daveliu@freescale.com> 4 * 5 * This program is free software; you can redistribute it and/or 6 * modify it under the terms of the GNU General Public License as 7 * published by the Free Software Foundation; either version 2 of 8 * the License, or (at your option) any later version. 9 * 10 * This program is distributed in the hope that it will be useful, 11 * but WITHOUT ANY WARRANTY; without even the implied warranty of 12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 13 * GNU General Public License for more details. 14 * 15 * You should have received a copy of the GNU General Public License 16 * along with this program; if not, write to the Free Software 17 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 18 * MA 02111-1307 USA 19 */ 20 21 #ifndef __CONFIG_H 22 #define __CONFIG_H 23 24 /* 25 * High Level Configuration Options 26 */ 27 #define CONFIG_E300 1 /* E300 family */ 28 #define CONFIG_MPC83xx 1 /* MPC83xx family */ 29 #define CONFIG_MPC837x 1 /* MPC837x CPU specific */ 30 #define CONFIG_MPC837XEMDS 1 /* MPC837XEMDS board specific */ 31 32 #define CONFIG_SYS_TEXT_BASE 0xFE000000 33 34 /* 35 * System Clock Setup 36 */ 37 #ifdef CONFIG_PCISLAVE 38 #define CONFIG_83XX_PCICLK 66000000 /* in HZ */ 39 #else 40 #define CONFIG_83XX_CLKIN 66000000 /* in Hz */ 41 #endif 42 43 #ifndef CONFIG_SYS_CLK_FREQ 44 #define CONFIG_SYS_CLK_FREQ 66000000 45 #endif 46 47 /* 48 * Hardware Reset Configuration Word 49 * if CLKIN is 66MHz, then 50 * CSB = 396MHz, CORE = 594MHz, DDRC = 396MHz, LBC = 396MHz 51 */ 52 #define CONFIG_SYS_HRCW_LOW (\ 53 HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ 54 HRCWL_DDR_TO_SCB_CLK_1X1 |\ 55 HRCWL_SVCOD_DIV_2 |\ 56 HRCWL_CSB_TO_CLKIN_6X1 |\ 57 HRCWL_CORE_TO_CSB_1_5X1) 58 59 #ifdef CONFIG_PCISLAVE 60 #define CONFIG_SYS_HRCW_HIGH (\ 61 HRCWH_PCI_AGENT |\ 62 HRCWH_PCI1_ARBITER_DISABLE |\ 63 HRCWH_CORE_ENABLE |\ 64 HRCWH_FROM_0XFFF00100 |\ 65 HRCWH_BOOTSEQ_DISABLE |\ 66 HRCWH_SW_WATCHDOG_DISABLE |\ 67 HRCWH_ROM_LOC_LOCAL_16BIT |\ 68 HRCWH_RL_EXT_LEGACY |\ 69 HRCWH_TSEC1M_IN_RGMII |\ 70 HRCWH_TSEC2M_IN_RGMII |\ 71 HRCWH_BIG_ENDIAN |\ 72 HRCWH_LDP_CLEAR) 73 #else 74 #define CONFIG_SYS_HRCW_HIGH (\ 75 HRCWH_PCI_HOST |\ 76 HRCWH_PCI1_ARBITER_ENABLE |\ 77 HRCWH_CORE_ENABLE |\ 78 HRCWH_FROM_0X00000100 |\ 79 HRCWH_BOOTSEQ_DISABLE |\ 80 HRCWH_SW_WATCHDOG_DISABLE |\ 81 HRCWH_ROM_LOC_LOCAL_16BIT |\ 82 HRCWH_RL_EXT_LEGACY |\ 83 HRCWH_TSEC1M_IN_RGMII |\ 84 HRCWH_TSEC2M_IN_RGMII |\ 85 HRCWH_BIG_ENDIAN |\ 86 HRCWH_LDP_CLEAR) 87 #endif 88 89 /* Arbiter Configuration Register */ 90 #define CONFIG_SYS_ACR_PIPE_DEP 3 /* Arbiter pipeline depth is 4 */ 91 #define CONFIG_SYS_ACR_RPTCNT 3 /* Arbiter repeat count is 4 */ 92 93 /* System Priority Control Register */ 94 #define CONFIG_SYS_SPCR_TSECEP 3 /* eTSEC1/2 emergency has highest priority */ 95 96 /* 97 * IP blocks clock configuration 98 */ 99 #define CONFIG_SYS_SCCR_TSEC1CM 1 /* CSB:eTSEC1 = 1:1 */ 100 #define CONFIG_SYS_SCCR_TSEC2CM 1 /* CSB:eTSEC2 = 1:1 */ 101 #define CONFIG_SYS_SCCR_SATACM SCCR_SATACM_2 /* CSB:SATA[0:3] = 2:1 */ 102 103 /* 104 * System IO Config 105 */ 106 #define CONFIG_SYS_SICRH 0x00000000 107 #define CONFIG_SYS_SICRL 0x00000000 108 109 /* 110 * Output Buffer Impedance 111 */ 112 #define CONFIG_SYS_OBIR 0x31100000 113 114 #define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */ 115 #define CONFIG_BOARD_EARLY_INIT_R 116 #define CONFIG_HWCONFIG 117 118 /* 119 * IMMR new address 120 */ 121 #define CONFIG_SYS_IMMR 0xE0000000 122 123 /* 124 * DDR Setup 125 */ 126 #define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory */ 127 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE 128 #define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE 129 #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05 130 #define CONFIG_SYS_83XX_DDR_USES_CS0 131 #define CONFIG_SYS_DDRCDR_VALUE 0x80080001 /* ODT 150ohm on SoC */ 132 133 #undef CONFIG_DDR_ECC /* support DDR ECC function */ 134 #undef CONFIG_DDR_ECC_CMD /* Use DDR ECC user commands */ 135 136 #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ 137 #define CONFIG_NEVER_ASSERT_ODT_TO_CPU /* Never assert ODT to internal IOs */ 138 139 #if defined(CONFIG_SPD_EEPROM) 140 #define SPD_EEPROM_ADDRESS 0x51 /* I2C address of DDR SODIMM SPD */ 141 #else 142 /* 143 * Manually set up DDR parameters 144 * WHITE ELECTRONIC DESIGNS - W3HG64M72EEU403PD4 SO-DIMM 145 * consist of nine chips from SAMSUNG K4T51083QE-ZC(L)D5 146 */ 147 #define CONFIG_SYS_DDR_SIZE 512 /* MB */ 148 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000001f 149 #define CONFIG_SYS_DDR_CS0_CONFIG ( CSCONFIG_EN \ 150 | 0x00010000 /* ODT_WR to CSn */ \ 151 | CSCONFIG_ROW_BIT_14 | CSCONFIG_COL_BIT_10 ) 152 /* 0x80010202 */ 153 #define CONFIG_SYS_DDR_TIMING_3 0x00000000 154 #define CONFIG_SYS_DDR_TIMING_0 ( ( 0 << TIMING_CFG0_RWT_SHIFT ) \ 155 | ( 0 << TIMING_CFG0_WRT_SHIFT ) \ 156 | ( 0 << TIMING_CFG0_RRT_SHIFT ) \ 157 | ( 0 << TIMING_CFG0_WWT_SHIFT ) \ 158 | ( 6 << TIMING_CFG0_ACT_PD_EXIT_SHIFT ) \ 159 | ( 2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT ) \ 160 | ( 8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT ) \ 161 | ( 2 << TIMING_CFG0_MRS_CYC_SHIFT ) ) 162 /* 0x00620802 */ 163 #define CONFIG_SYS_DDR_TIMING_1 ( ( 3 << TIMING_CFG1_PRETOACT_SHIFT ) \ 164 | ( 9 << TIMING_CFG1_ACTTOPRE_SHIFT ) \ 165 | ( 3 << TIMING_CFG1_ACTTORW_SHIFT ) \ 166 | ( 5 << TIMING_CFG1_CASLAT_SHIFT ) \ 167 | (13 << TIMING_CFG1_REFREC_SHIFT ) \ 168 | ( 3 << TIMING_CFG1_WRREC_SHIFT ) \ 169 | ( 2 << TIMING_CFG1_ACTTOACT_SHIFT ) \ 170 | ( 2 << TIMING_CFG1_WRTORD_SHIFT ) ) 171 /* 0x3935d322 */ 172 #define CONFIG_SYS_DDR_TIMING_2 ( ( 1 << TIMING_CFG2_ADD_LAT_SHIFT ) \ 173 | ( 6 << TIMING_CFG2_CPO_SHIFT ) \ 174 | ( 2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT ) \ 175 | ( 4 << TIMING_CFG2_RD_TO_PRE_SHIFT ) \ 176 | ( 2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT ) \ 177 | ( 3 << TIMING_CFG2_CKE_PLS_SHIFT ) \ 178 | ( 8 << TIMING_CFG2_FOUR_ACT_SHIFT) ) 179 /* 0x131088c8 */ 180 #define CONFIG_SYS_DDR_INTERVAL ( ( 0x03E0 << SDRAM_INTERVAL_REFINT_SHIFT ) \ 181 | ( 0x0100 << SDRAM_INTERVAL_BSTOPRE_SHIFT ) ) 182 /* 0x03E00100 */ 183 #define CONFIG_SYS_DDR_SDRAM_CFG 0x43000000 184 #define CONFIG_SYS_DDR_SDRAM_CFG2 0x00001000 /* 1 posted refresh */ 185 #define CONFIG_SYS_DDR_MODE ( ( 0x0448 << SDRAM_MODE_ESD_SHIFT ) \ 186 | ( 0x1432 << SDRAM_MODE_SD_SHIFT ) ) 187 /* ODT 150ohm CL=3, AL=1 on SDRAM */ 188 #define CONFIG_SYS_DDR_MODE2 0x00000000 189 #endif 190 191 /* 192 * Memory test 193 */ 194 #undef CONFIG_SYS_DRAM_TEST /* memory test, takes time */ 195 #define CONFIG_SYS_MEMTEST_START 0x00040000 /* memtest region */ 196 #define CONFIG_SYS_MEMTEST_END 0x00140000 197 198 /* 199 * The reserved memory 200 */ 201 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 202 203 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) 204 #define CONFIG_SYS_RAMBOOT 205 #else 206 #undef CONFIG_SYS_RAMBOOT 207 #endif 208 209 /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */ 210 #define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */ 211 #define CONFIG_SYS_MALLOC_LEN (512 * 1024) /* Reserved for malloc */ 212 213 /* 214 * Initial RAM Base Address Setup 215 */ 216 #define CONFIG_SYS_INIT_RAM_LOCK 1 217 #define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ 218 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM */ 219 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 220 221 /* 222 * Local Bus Configuration & Clock Setup 223 */ 224 #define CONFIG_SYS_LCRR_DBYP LCRR_DBYP 225 #define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_8 226 #define CONFIG_SYS_LBC_LBCR 0x00000000 227 #define CONFIG_FSL_ELBC 1 228 229 /* 230 * FLASH on the Local Bus 231 */ 232 #define CONFIG_SYS_FLASH_CFI /* use the Common Flash Interface */ 233 #define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */ 234 #define CONFIG_SYS_FLASH_BASE 0xFE000000 /* FLASH base address */ 235 #define CONFIG_SYS_FLASH_SIZE 32 /* max FLASH size is 32M */ 236 #define CONFIG_SYS_FLASH_PROTECTION 1 /* Use h/w Flash protection. */ 237 238 #define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE /* Window base at flash base */ 239 #define CONFIG_SYS_LBLAWAR0_PRELIM 0x80000018 /* 32MB window size */ 240 241 #define CONFIG_SYS_BR0_PRELIM ( CONFIG_SYS_FLASH_BASE /* Flash Base address */ \ 242 | (2 << BR_PS_SHIFT) /* 16 bit port size */ \ 243 | BR_V ) /* valid */ 244 #define CONFIG_SYS_OR0_PRELIM ( (~(CONFIG_SYS_FLASH_SIZE - 1) << 20) \ 245 | OR_UPM_XAM \ 246 | OR_GPCM_CSNT \ 247 | OR_GPCM_ACS_DIV2 \ 248 | OR_GPCM_XACS \ 249 | OR_GPCM_SCY_15 \ 250 | OR_GPCM_TRLX \ 251 | OR_GPCM_EHTR \ 252 | OR_GPCM_EAD ) 253 /* 0xFE000FF7 */ 254 255 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ 256 #define CONFIG_SYS_MAX_FLASH_SECT 256 /* max sectors per device */ 257 258 #undef CONFIG_SYS_FLASH_CHECKSUM 259 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 260 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 261 262 /* 263 * BCSR on the Local Bus 264 */ 265 #define CONFIG_SYS_BCSR 0xF8000000 266 #define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_BCSR /* Access window base at BCSR base */ 267 #define CONFIG_SYS_LBLAWAR1_PRELIM 0x8000000E /* Access window size 32K */ 268 269 #define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_BCSR | 0x00000801) /* Port size=8bit, MSEL=GPCM */ 270 #define CONFIG_SYS_OR1_PRELIM 0xFFFFE9f7 /* length 32K */ 271 272 /* 273 * NAND Flash on the Local Bus 274 */ 275 #define CONFIG_CMD_NAND 1 276 #define CONFIG_MTD_NAND_VERIFY_WRITE 1 277 #define CONFIG_SYS_MAX_NAND_DEVICE 1 278 #define CONFIG_NAND_FSL_ELBC 1 279 280 #define CONFIG_SYS_NAND_BASE 0xE0600000 /* 0xE0600000 */ 281 #define CONFIG_SYS_BR3_PRELIM ( CONFIG_SYS_NAND_BASE \ 282 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ 283 | BR_PS_8 /* Port Size = 8 bit */ \ 284 | BR_MS_FCM /* MSEL = FCM */ \ 285 | BR_V ) /* valid */ 286 #define CONFIG_SYS_OR3_PRELIM ( 0xFFFF8000 /* length 32K */ \ 287 | OR_FCM_BCTLD \ 288 | OR_FCM_CST \ 289 | OR_FCM_CHT \ 290 | OR_FCM_SCY_1 \ 291 | OR_FCM_RST \ 292 | OR_FCM_TRLX \ 293 | OR_FCM_EHTR ) 294 /* 0xFFFF919E */ 295 296 #define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_NAND_BASE 297 #define CONFIG_SYS_LBLAWAR3_PRELIM 0x8000000E /* 32KB */ 298 299 /* 300 * Serial Port 301 */ 302 #define CONFIG_CONS_INDEX 1 303 #define CONFIG_SYS_NS16550 304 #define CONFIG_SYS_NS16550_SERIAL 305 #define CONFIG_SYS_NS16550_REG_SIZE 1 306 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 307 308 #define CONFIG_SYS_BAUDRATE_TABLE \ 309 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 310 311 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500) 312 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600) 313 314 /* Use the HUSH parser */ 315 #define CONFIG_SYS_HUSH_PARSER 316 #ifdef CONFIG_SYS_HUSH_PARSER 317 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 318 #endif 319 320 /* Pass open firmware flat tree */ 321 #define CONFIG_OF_LIBFDT 1 322 #define CONFIG_OF_BOARD_SETUP 1 323 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 324 325 /* I2C */ 326 #define CONFIG_HARD_I2C /* I2C with hardware support */ 327 #undef CONFIG_SOFT_I2C /* I2C bit-banged */ 328 #define CONFIG_FSL_I2C 329 #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ 330 #define CONFIG_SYS_I2C_SLAVE 0x7F 331 #define CONFIG_SYS_I2C_NOPROBES {0x51} /* Don't probe these addrs */ 332 #define CONFIG_SYS_I2C_OFFSET 0x3000 333 #define CONFIG_SYS_I2C2_OFFSET 0x3100 334 335 /* 336 * Config on-board RTC 337 */ 338 #define CONFIG_RTC_DS1374 /* use ds1374 rtc via i2c */ 339 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 /* at address 0x68 */ 340 341 /* 342 * General PCI 343 * Addresses are mapped 1-1. 344 */ 345 #define CONFIG_SYS_PCI_MEM_BASE 0x80000000 346 #define CONFIG_SYS_PCI_MEM_PHYS CONFIG_SYS_PCI_MEM_BASE 347 #define CONFIG_SYS_PCI_MEM_SIZE 0x10000000 /* 256M */ 348 #define CONFIG_SYS_PCI_MMIO_BASE 0x90000000 349 #define CONFIG_SYS_PCI_MMIO_PHYS CONFIG_SYS_PCI_MMIO_BASE 350 #define CONFIG_SYS_PCI_MMIO_SIZE 0x10000000 /* 256M */ 351 #define CONFIG_SYS_PCI_IO_BASE 0x00000000 352 #define CONFIG_SYS_PCI_IO_PHYS 0xE0300000 353 #define CONFIG_SYS_PCI_IO_SIZE 0x100000 /* 1M */ 354 355 #define CONFIG_SYS_PCI_SLV_MEM_LOCAL CONFIG_SYS_SDRAM_BASE 356 #define CONFIG_SYS_PCI_SLV_MEM_BUS 0x00000000 357 #define CONFIG_SYS_PCI_SLV_MEM_SIZE 0x80000000 358 359 #define CONFIG_SYS_PCIE1_BASE 0xA0000000 360 #define CONFIG_SYS_PCIE1_CFG_BASE 0xA0000000 361 #define CONFIG_SYS_PCIE1_CFG_SIZE 0x08000000 362 #define CONFIG_SYS_PCIE1_MEM_BASE 0xA8000000 363 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xA8000000 364 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 365 #define CONFIG_SYS_PCIE1_IO_BASE 0x00000000 366 #define CONFIG_SYS_PCIE1_IO_PHYS 0xB8000000 367 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00800000 368 369 #define CONFIG_SYS_PCIE2_BASE 0xC0000000 370 #define CONFIG_SYS_PCIE2_CFG_BASE 0xC0000000 371 #define CONFIG_SYS_PCIE2_CFG_SIZE 0x08000000 372 #define CONFIG_SYS_PCIE2_MEM_BASE 0xC8000000 373 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xC8000000 374 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 375 #define CONFIG_SYS_PCIE2_IO_BASE 0x00000000 376 #define CONFIG_SYS_PCIE2_IO_PHYS 0xD8000000 377 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00800000 378 379 #ifdef CONFIG_PCI 380 #ifndef __ASSEMBLY__ 381 extern int board_pci_host_broken(void); 382 #endif 383 #define CONFIG_PCIE 384 #define CONFIG_PQ_MDS_PIB 1 /* PQ MDS Platform IO Board */ 385 386 #define CONFIG_HAS_FSL_DR_USB 1 /* fixup device tree for the DR USB */ 387 388 #define CONFIG_NET_MULTI 389 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 390 391 #undef CONFIG_EEPRO100 392 #undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 393 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */ 394 #endif /* CONFIG_PCI */ 395 396 #ifndef CONFIG_NET_MULTI 397 #define CONFIG_NET_MULTI 1 398 #endif 399 400 /* 401 * TSEC 402 */ 403 #define CONFIG_TSEC_ENET /* TSEC ethernet support */ 404 #define CONFIG_SYS_TSEC1_OFFSET 0x24000 405 #define CONFIG_SYS_TSEC1 (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET) 406 #define CONFIG_SYS_TSEC2_OFFSET 0x25000 407 #define CONFIG_SYS_TSEC2 (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC2_OFFSET) 408 409 /* 410 * TSEC ethernet configuration 411 */ 412 #define CONFIG_MII 1 /* MII PHY management */ 413 #define CONFIG_TSEC1 1 414 #define CONFIG_TSEC1_NAME "eTSEC0" 415 #define CONFIG_TSEC2 1 416 #define CONFIG_TSEC2_NAME "eTSEC1" 417 #define TSEC1_PHY_ADDR 2 418 #define TSEC2_PHY_ADDR 3 419 #define TSEC1_PHY_ADDR_SGMII 8 420 #define TSEC2_PHY_ADDR_SGMII 4 421 #define TSEC1_PHYIDX 0 422 #define TSEC2_PHYIDX 0 423 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 424 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 425 426 /* Options are: TSEC[0-1] */ 427 #define CONFIG_ETHPRIME "eTSEC1" 428 429 /* SERDES */ 430 #define CONFIG_FSL_SERDES 431 #define CONFIG_FSL_SERDES1 0xe3000 432 #define CONFIG_FSL_SERDES2 0xe3100 433 434 /* 435 * SATA 436 */ 437 #define CONFIG_LIBATA 438 #define CONFIG_FSL_SATA 439 440 #define CONFIG_SYS_SATA_MAX_DEVICE 2 441 #define CONFIG_SATA1 442 #define CONFIG_SYS_SATA1_OFFSET 0x18000 443 #define CONFIG_SYS_SATA1 (CONFIG_SYS_IMMR + CONFIG_SYS_SATA1_OFFSET) 444 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 445 #define CONFIG_SATA2 446 #define CONFIG_SYS_SATA2_OFFSET 0x19000 447 #define CONFIG_SYS_SATA2 (CONFIG_SYS_IMMR + CONFIG_SYS_SATA2_OFFSET) 448 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA 449 450 #ifdef CONFIG_FSL_SATA 451 #define CONFIG_LBA48 452 #define CONFIG_CMD_SATA 453 #define CONFIG_DOS_PARTITION 454 #define CONFIG_CMD_EXT2 455 #endif 456 457 /* 458 * Environment 459 */ 460 #ifndef CONFIG_SYS_RAMBOOT 461 #define CONFIG_ENV_IS_IN_FLASH 1 462 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) 463 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */ 464 #define CONFIG_ENV_SIZE 0x2000 465 #else 466 #define CONFIG_SYS_NO_FLASH 1 /* Flash is not usable now */ 467 #define CONFIG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ 468 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) 469 #define CONFIG_ENV_SIZE 0x2000 470 #endif 471 472 #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ 473 #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ 474 475 /* 476 * BOOTP options 477 */ 478 #define CONFIG_BOOTP_BOOTFILESIZE 479 #define CONFIG_BOOTP_BOOTPATH 480 #define CONFIG_BOOTP_GATEWAY 481 #define CONFIG_BOOTP_HOSTNAME 482 483 484 /* 485 * Command line configuration. 486 */ 487 #include <config_cmd_default.h> 488 489 #define CONFIG_CMD_PING 490 #define CONFIG_CMD_I2C 491 #define CONFIG_CMD_MII 492 #define CONFIG_CMD_DATE 493 494 #if defined(CONFIG_PCI) 495 #define CONFIG_CMD_PCI 496 #endif 497 498 #if defined(CONFIG_SYS_RAMBOOT) 499 #undef CONFIG_CMD_SAVEENV 500 #undef CONFIG_CMD_LOADS 501 #endif 502 503 #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ 504 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 505 506 #undef CONFIG_WATCHDOG /* watchdog disabled */ 507 508 #define CONFIG_MMC 1 509 510 #ifdef CONFIG_MMC 511 #define CONFIG_FSL_ESDHC 512 #define CONFIG_FSL_ESDHC_PIN_MUX 513 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC83xx_ESDHC_ADDR 514 #define CONFIG_CMD_MMC 515 #define CONFIG_GENERIC_MMC 516 #define CONFIG_CMD_EXT2 517 #define CONFIG_CMD_FAT 518 #define CONFIG_DOS_PARTITION 519 #endif 520 521 /* 522 * Miscellaneous configurable options 523 */ 524 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 525 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 526 #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ 527 528 #if defined(CONFIG_CMD_KGDB) 529 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 530 #else 531 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 532 #endif 533 534 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ 535 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 536 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 537 #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ 538 539 /* 540 * For booting Linux, the board info and command line data 541 * have to be in the first 256 MB of memory, since this is 542 * the maximum mapped by the Linux kernel during initialization. 543 */ 544 #define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* Initial Memory map for Linux */ 545 546 /* 547 * Core HID Setup 548 */ 549 #define CONFIG_SYS_HID0_INIT 0x000000000 550 #define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \ 551 HID0_ENABLE_INSTRUCTION_CACHE) 552 #define CONFIG_SYS_HID2 HID2_HBE 553 554 /* 555 * MMU Setup 556 */ 557 #define CONFIG_HIGH_BATS 1 /* High BATs supported */ 558 559 /* DDR: cache cacheable */ 560 #define CONFIG_SYS_SDRAM_LOWER CONFIG_SYS_SDRAM_BASE 561 #define CONFIG_SYS_SDRAM_UPPER (CONFIG_SYS_SDRAM_BASE + 0x10000000) 562 563 #define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_LOWER | BATL_PP_10 | BATL_MEMCOHERENCE) 564 #define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_LOWER | BATU_BL_256M | BATU_VS | BATU_VP) 565 #define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L 566 #define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U 567 568 #define CONFIG_SYS_IBAT1L (CONFIG_SYS_SDRAM_UPPER | BATL_PP_10 | BATL_MEMCOHERENCE) 569 #define CONFIG_SYS_IBAT1U (CONFIG_SYS_SDRAM_UPPER | BATU_BL_256M | BATU_VS | BATU_VP) 570 #define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L 571 #define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U 572 573 /* IMMRBAR, PCI IO and NAND: cache-inhibit and guarded */ 574 #define CONFIG_SYS_IBAT2L (CONFIG_SYS_IMMR | BATL_PP_10 | \ 575 BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) 576 #define CONFIG_SYS_IBAT2U (CONFIG_SYS_IMMR | BATU_BL_8M | BATU_VS | BATU_VP) 577 #define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L 578 #define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U 579 580 /* BCSR: cache-inhibit and guarded */ 581 #define CONFIG_SYS_IBAT3L (CONFIG_SYS_BCSR | BATL_PP_10 | \ 582 BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) 583 #define CONFIG_SYS_IBAT3U (CONFIG_SYS_BCSR | BATU_BL_128K | BATU_VS | BATU_VP) 584 #define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L 585 #define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U 586 587 /* FLASH: icache cacheable, but dcache-inhibit and guarded */ 588 #define CONFIG_SYS_IBAT4L (CONFIG_SYS_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) 589 #define CONFIG_SYS_IBAT4U (CONFIG_SYS_FLASH_BASE | BATU_BL_32M | BATU_VS | BATU_VP) 590 #define CONFIG_SYS_DBAT4L (CONFIG_SYS_FLASH_BASE | BATL_PP_10 | \ 591 BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) 592 #define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U 593 594 /* Stack in dcache: cacheable, no memory coherence */ 595 #define CONFIG_SYS_IBAT5L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10) 596 #define CONFIG_SYS_IBAT5U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) 597 #define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L 598 #define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U 599 600 #ifdef CONFIG_PCI 601 /* PCI MEM space: cacheable */ 602 #define CONFIG_SYS_IBAT6L (CONFIG_SYS_PCI_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE) 603 #define CONFIG_SYS_IBAT6U (CONFIG_SYS_PCI_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP) 604 #define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L 605 #define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U 606 /* PCI MMIO space: cache-inhibit and guarded */ 607 #define CONFIG_SYS_IBAT7L (CONFIG_SYS_PCI_MMIO_PHYS | BATL_PP_10 | \ 608 BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) 609 #define CONFIG_SYS_IBAT7U (CONFIG_SYS_PCI_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP) 610 #define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L 611 #define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U 612 #else 613 #define CONFIG_SYS_IBAT6L (0) 614 #define CONFIG_SYS_IBAT6U (0) 615 #define CONFIG_SYS_IBAT7L (0) 616 #define CONFIG_SYS_IBAT7U (0) 617 #define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L 618 #define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U 619 #define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L 620 #define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U 621 #endif 622 623 #if defined(CONFIG_CMD_KGDB) 624 #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ 625 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ 626 #endif 627 628 /* 629 * Environment Configuration 630 */ 631 632 #define CONFIG_ENV_OVERWRITE 633 634 #if defined(CONFIG_TSEC_ENET) 635 #define CONFIG_HAS_ETH0 636 #define CONFIG_HAS_ETH1 637 #endif 638 639 #define CONFIG_BAUDRATE 115200 640 641 #define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */ 642 643 #define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */ 644 #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ 645 646 #define CONFIG_EXTRA_ENV_SETTINGS \ 647 "netdev=eth0\0" \ 648 "consoledev=ttyS0\0" \ 649 "ramdiskaddr=1000000\0" \ 650 "ramdiskfile=ramfs.83xx\0" \ 651 "fdtaddr=780000\0" \ 652 "fdtfile=mpc8379_mds.dtb\0" \ 653 "" 654 655 #define CONFIG_NFSBOOTCOMMAND \ 656 "setenv bootargs root=/dev/nfs rw " \ 657 "nfsroot=$serverip:$rootpath " \ 658 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 659 "console=$consoledev,$baudrate $othbootargs;" \ 660 "tftp $loadaddr $bootfile;" \ 661 "tftp $fdtaddr $fdtfile;" \ 662 "bootm $loadaddr - $fdtaddr" 663 664 #define CONFIG_RAMBOOTCOMMAND \ 665 "setenv bootargs root=/dev/ram rw " \ 666 "console=$consoledev,$baudrate $othbootargs;" \ 667 "tftp $ramdiskaddr $ramdiskfile;" \ 668 "tftp $loadaddr $bootfile;" \ 669 "tftp $fdtaddr $fdtfile;" \ 670 "bootm $loadaddr $ramdiskaddr $fdtaddr" 671 672 673 #define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND 674 675 #endif /* __CONFIG_H */ 676