1 /* 2 * Copyright (C) Freescale Semiconductor, Inc. 2006. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 /* 8 MPC8349E-mITX and MPC8349E-mITX-GP board configuration file 9 10 Memory map: 11 12 0x0000_0000-0x0FFF_FFFF DDR SDRAM (256 MB) 13 0x8000_0000-0x9FFF_FFFF PCI1 memory space (512 MB) 14 0xA000_0000-0xBFFF_FFFF PCI2 memory space (512 MB) 15 0xE000_0000-0xEFFF_FFFF IMMR (1 MB) 16 0xE200_0000-0xE2FF_FFFF PCI1 I/O space (16 MB) 17 0xE300_0000-0xE3FF_FFFF PCI2 I/O space (16 MB) 18 0xF000_0000-0xF000_FFFF Compact Flash (MPC8349E-mITX only) 19 0xF001_0000-0xF001_FFFF Local bus expansion slot 20 0xF800_0000-0xF801_FFFF Vitesse 7385 Parallel Interface (MPC8349E-mITX only) 21 0xFE00_0000-0xFE7F_FFFF First 8MB bank of Flash memory 22 0xFE80_0000-0xFEFF_FFFF Second 8MB bank of Flash memory (MPC8349E-mITX only) 23 24 I2C address list: 25 Align. Board 26 Bus Addr Part No. Description Length Location 27 ---------------------------------------------------------------- 28 I2C0 0x50 M24256-BWMN6P Board EEPROM 2 U64 29 30 I2C1 0x20 PCF8574 I2C Expander 0 U8 31 I2C1 0x21 PCF8574 I2C Expander 0 U10 32 I2C1 0x38 PCF8574A I2C Expander 0 U8 33 I2C1 0x39 PCF8574A I2C Expander 0 U10 34 I2C1 0x51 (DDR) DDR EEPROM 1 U1 35 I2C1 0x68 DS1339 RTC 1 U68 36 37 Note that a given board has *either* a pair of 8574s or a pair of 8574As. 38 */ 39 40 #ifndef __CONFIG_H 41 #define __CONFIG_H 42 43 #define CONFIG_DISPLAY_BOARDINFO 44 45 #if (CONFIG_SYS_TEXT_BASE == 0xFE000000) 46 #define CONFIG_SYS_LOWBOOT 47 #endif 48 49 /* 50 * High Level Configuration Options 51 */ 52 #define CONFIG_MPC834x /* MPC834x family (8343, 8347, 8349) */ 53 #define CONFIG_MPC8349 /* MPC8349 specific */ 54 55 #ifndef CONFIG_SYS_TEXT_BASE 56 #define CONFIG_SYS_TEXT_BASE 0xFEF00000 57 #endif 58 59 #define CONFIG_SYS_IMMR 0xE0000000 /* The IMMR is relocated to here */ 60 61 #define CONFIG_MISC_INIT_F 62 #define CONFIG_MISC_INIT_R 63 64 /* 65 * On-board devices 66 */ 67 68 #ifdef CONFIG_MPC8349ITX 69 /* The CF card interface on the back of the board */ 70 #define CONFIG_COMPACT_FLASH 71 #define CONFIG_VSC7385_ENET /* VSC7385 ethernet support */ 72 #define CONFIG_SATA_SIL3114 /* SIL3114 SATA controller */ 73 #define CONFIG_SYS_USB_HOST /* use the EHCI USB controller */ 74 #endif 75 76 #define CONFIG_PCI 77 #define CONFIG_RTC_DS1337 78 #define CONFIG_SYS_I2C 79 #define CONFIG_TSEC_ENET /* TSEC Ethernet support */ 80 81 /* 82 * Device configurations 83 */ 84 85 /* I2C */ 86 #ifdef CONFIG_SYS_I2C 87 #define CONFIG_SYS_I2C_FSL 88 #define CONFIG_SYS_FSL_I2C_SPEED 400000 89 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 90 #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 91 #define CONFIG_SYS_FSL_I2C2_SPEED 400000 92 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 93 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 94 95 #define CONFIG_SYS_SPD_BUS_NUM 1 /* The I2C bus for SPD */ 96 #define CONFIG_SYS_RTC_BUS_NUM 1 /* The I2C bus for RTC */ 97 98 #define CONFIG_SYS_I2C_8574_ADDR1 0x20 /* I2C1, PCF8574 */ 99 #define CONFIG_SYS_I2C_8574_ADDR2 0x21 /* I2C1, PCF8574 */ 100 #define CONFIG_SYS_I2C_8574A_ADDR1 0x38 /* I2C1, PCF8574A */ 101 #define CONFIG_SYS_I2C_8574A_ADDR2 0x39 /* I2C1, PCF8574A */ 102 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* I2C0, Board EEPROM */ 103 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 /* I2C1, DS1339 RTC*/ 104 #define SPD_EEPROM_ADDRESS 0x51 /* I2C1, DDR */ 105 106 /* Don't probe these addresses: */ 107 #define CONFIG_SYS_I2C_NOPROBES { {1, CONFIG_SYS_I2C_8574_ADDR1}, \ 108 {1, CONFIG_SYS_I2C_8574_ADDR2}, \ 109 {1, CONFIG_SYS_I2C_8574A_ADDR1}, \ 110 {1, CONFIG_SYS_I2C_8574A_ADDR2} } 111 /* Bit definitions for the 8574[A] I2C expander */ 112 /* Board revision, 00=0.0, 01=0.1, 10=1.0 */ 113 #define I2C_8574_REVISION 0x03 114 #define I2C_8574_CF 0x08 /* 1=Compact flash absent, 0=present */ 115 #define I2C_8574_MPCICLKRN 0x10 /* MiniPCI Clk Run */ 116 #define I2C_8574_PCI66 0x20 /* 0=33MHz PCI, 1=66MHz PCI */ 117 #define I2C_8574_FLASHSIDE 0x40 /* 0=Reset vector from U4, 1=from U7*/ 118 119 #endif 120 121 /* Compact Flash */ 122 #ifdef CONFIG_COMPACT_FLASH 123 124 #define CONFIG_SYS_IDE_MAXBUS 1 125 #define CONFIG_SYS_IDE_MAXDEVICE 1 126 127 #define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 128 #define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_CF_BASE 129 #define CONFIG_SYS_ATA_DATA_OFFSET 0x0000 130 #define CONFIG_SYS_ATA_REG_OFFSET 0 131 #define CONFIG_SYS_ATA_ALT_OFFSET 0x0200 132 #define CONFIG_SYS_ATA_STRIDE 2 133 134 /* If a CF card is not inserted, time out quickly */ 135 #define ATA_RESET_TIME 1 136 137 #endif 138 139 /* 140 * SATA 141 */ 142 #ifdef CONFIG_SATA_SIL3114 143 144 #define CONFIG_SYS_SATA_MAX_DEVICE 4 145 #define CONFIG_LIBATA 146 #define CONFIG_LBA48 147 148 #endif 149 150 #ifdef CONFIG_SYS_USB_HOST 151 /* 152 * Support USB 153 */ 154 #define CONFIG_USB_STORAGE 155 #define CONFIG_USB_EHCI 156 #define CONFIG_USB_EHCI_FSL 157 158 /* Current USB implementation supports the only USB controller, 159 * so we have to choose between the MPH or the DR ones */ 160 #if 1 161 #define CONFIG_HAS_FSL_MPH_USB 162 #else 163 #define CONFIG_HAS_FSL_DR_USB 164 #endif 165 166 #endif 167 168 /* 169 * DDR Setup 170 */ 171 #define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory*/ 172 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE 173 #define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE 174 #define CONFIG_SYS_83XX_DDR_USES_CS0 175 #define CONFIG_SYS_MEMTEST_START 0x1000 /* memtest region */ 176 #define CONFIG_SYS_MEMTEST_END 0x2000 177 178 #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN \ 179 | DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075) 180 181 #define CONFIG_VERY_BIG_RAM 182 #define CONFIG_MAX_MEM_MAPPED ((phys_size_t)256 << 20) 183 184 #ifdef CONFIG_SYS_I2C 185 #define CONFIG_SPD_EEPROM /* use SPD EEPROM for DDR setup*/ 186 #endif 187 188 /* No SPD? Then manually set up DDR parameters */ 189 #ifndef CONFIG_SPD_EEPROM 190 #define CONFIG_SYS_DDR_SIZE 256 /* Mb */ 191 #define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN \ 192 | CSCONFIG_ROW_BIT_13 \ 193 | CSCONFIG_COL_BIT_10) 194 195 #define CONFIG_SYS_DDR_TIMING_1 0x26242321 196 #define CONFIG_SYS_DDR_TIMING_2 0x00000800 /* P9-45, may need tuning */ 197 #endif 198 199 /* 200 *Flash on the Local Bus 201 */ 202 203 #define CONFIG_SYS_FLASH_CFI /* use the Common Flash Interface */ 204 #define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */ 205 #define CONFIG_SYS_FLASH_BASE 0xFE000000 /* start of FLASH */ 206 #define CONFIG_SYS_FLASH_EMPTY_INFO 207 /* 127 64KB sectors + 8 8KB sectors per device */ 208 #define CONFIG_SYS_MAX_FLASH_SECT 135 209 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 210 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 211 #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT 212 213 /* The ITX has two flash chips, but the ITX-GP has only one. To support both 214 boards, we say we have two, but don't display a message if we find only one. */ 215 #define CONFIG_SYS_FLASH_QUIET_TEST 216 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ 217 #define CONFIG_SYS_FLASH_BANKS_LIST \ 218 {CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE + 0x800000} 219 #define CONFIG_SYS_FLASH_SIZE 16 /* FLASH size in MB */ 220 #define CONFIG_SYS_FLASH_PROTECTION 1 /* Use h/w Flash protection. */ 221 222 /* Vitesse 7385 */ 223 224 #ifdef CONFIG_VSC7385_ENET 225 226 #define CONFIG_TSEC2 227 228 /* The flash address and size of the VSC7385 firmware image */ 229 #define CONFIG_VSC7385_IMAGE 0xFEFFE000 230 #define CONFIG_VSC7385_IMAGE_SIZE 8192 231 232 #endif 233 234 /* 235 * BRx, ORx, LBLAWBARx, and LBLAWARx 236 */ 237 238 /* Flash */ 239 240 #define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ 241 | BR_PS_16 \ 242 | BR_MS_GPCM \ 243 | BR_V) 244 #define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \ 245 | OR_UPM_XAM \ 246 | OR_GPCM_CSNT \ 247 | OR_GPCM_ACS_DIV2 \ 248 | OR_GPCM_XACS \ 249 | OR_GPCM_SCY_15 \ 250 | OR_GPCM_TRLX_SET \ 251 | OR_GPCM_EHTR_SET \ 252 | OR_GPCM_EAD) 253 #define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE 254 #define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_16MB) 255 256 /* Vitesse 7385 */ 257 258 #define CONFIG_SYS_VSC7385_BASE 0xF8000000 259 260 #ifdef CONFIG_VSC7385_ENET 261 262 #define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_VSC7385_BASE \ 263 | BR_PS_8 \ 264 | BR_MS_GPCM \ 265 | BR_V) 266 #define CONFIG_SYS_OR1_PRELIM (OR_AM_128KB \ 267 | OR_GPCM_CSNT \ 268 | OR_GPCM_XACS \ 269 | OR_GPCM_SCY_15 \ 270 | OR_GPCM_SETA \ 271 | OR_GPCM_TRLX_SET \ 272 | OR_GPCM_EHTR_SET \ 273 | OR_GPCM_EAD) 274 275 #define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_VSC7385_BASE 276 #define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_128KB) 277 278 #endif 279 280 /* LED */ 281 282 #define CONFIG_SYS_LED_BASE 0xF9000000 283 #define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_LED_BASE \ 284 | BR_PS_8 \ 285 | BR_MS_GPCM \ 286 | BR_V) 287 #define CONFIG_SYS_OR2_PRELIM (OR_AM_2MB \ 288 | OR_GPCM_CSNT \ 289 | OR_GPCM_ACS_DIV2 \ 290 | OR_GPCM_XACS \ 291 | OR_GPCM_SCY_9 \ 292 | OR_GPCM_TRLX_SET \ 293 | OR_GPCM_EHTR_SET \ 294 | OR_GPCM_EAD) 295 296 /* Compact Flash */ 297 298 #ifdef CONFIG_COMPACT_FLASH 299 300 #define CONFIG_SYS_CF_BASE 0xF0000000 301 302 #define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_CF_BASE \ 303 | BR_PS_16 \ 304 | BR_MS_UPMA \ 305 | BR_V) 306 #define CONFIG_SYS_OR3_PRELIM (OR_UPM_AM | OR_UPM_BI) 307 308 #define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_CF_BASE 309 #define CONFIG_SYS_LBLAWAR3_PRELIM (LBLAWAR_EN | LBLAWAR_64KB) 310 311 #endif 312 313 /* 314 * U-Boot memory configuration 315 */ 316 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 317 318 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) 319 #define CONFIG_SYS_RAMBOOT 320 #else 321 #undef CONFIG_SYS_RAMBOOT 322 #endif 323 324 #define CONFIG_SYS_INIT_RAM_LOCK 325 #define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM addr */ 326 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM*/ 327 328 #define CONFIG_SYS_GBL_DATA_OFFSET \ 329 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 330 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 331 332 /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */ 333 #define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */ 334 #define CONFIG_SYS_MALLOC_LEN (256 * 1024) /* Reserved for malloc */ 335 336 /* 337 * Local Bus LCRR and LBCR regs 338 * LCRR: DLL bypass, Clock divider is 4 339 * External Local Bus rate is 340 * CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV 341 */ 342 #define CONFIG_SYS_LCRR_DBYP LCRR_DBYP 343 #define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4 344 #define CONFIG_SYS_LBC_LBCR 0x00000000 345 346 /* LB sdram refresh timer, about 6us */ 347 #define CONFIG_SYS_LBC_LSRT 0x32000000 348 /* LB refresh timer prescal, 266MHz/32*/ 349 #define CONFIG_SYS_LBC_MRTPR 0x20000000 350 351 /* 352 * Serial Port 353 */ 354 #define CONFIG_CONS_INDEX 1 355 #define CONFIG_SYS_NS16550_SERIAL 356 #define CONFIG_SYS_NS16550_REG_SIZE 1 357 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 358 359 #define CONFIG_SYS_BAUDRATE_TABLE \ 360 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} 361 362 #define CONFIG_CONSOLE ttyS0 363 #define CONFIG_BAUDRATE 115200 364 365 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x4500) 366 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x4600) 367 368 /* 369 * PCI 370 */ 371 #ifdef CONFIG_PCI 372 #define CONFIG_PCI_INDIRECT_BRIDGE 373 374 #define CONFIG_MPC83XX_PCI2 375 376 /* 377 * General PCI 378 * Addresses are mapped 1-1. 379 */ 380 #define CONFIG_SYS_PCI1_MEM_BASE 0x80000000 381 #define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE 382 #define CONFIG_SYS_PCI1_MEM_SIZE 0x10000000 /* 256M */ 383 #define CONFIG_SYS_PCI1_MMIO_BASE \ 384 (CONFIG_SYS_PCI1_MEM_BASE + CONFIG_SYS_PCI1_MEM_SIZE) 385 #define CONFIG_SYS_PCI1_MMIO_PHYS CONFIG_SYS_PCI1_MMIO_BASE 386 #define CONFIG_SYS_PCI1_MMIO_SIZE 0x10000000 /* 256M */ 387 #define CONFIG_SYS_PCI1_IO_BASE 0x00000000 388 #define CONFIG_SYS_PCI1_IO_PHYS 0xE2000000 389 #define CONFIG_SYS_PCI1_IO_SIZE 0x01000000 /* 16M */ 390 391 #ifdef CONFIG_MPC83XX_PCI2 392 #define CONFIG_SYS_PCI2_MEM_BASE \ 393 (CONFIG_SYS_PCI1_MMIO_BASE + CONFIG_SYS_PCI1_MMIO_SIZE) 394 #define CONFIG_SYS_PCI2_MEM_PHYS CONFIG_SYS_PCI2_MEM_BASE 395 #define CONFIG_SYS_PCI2_MEM_SIZE 0x10000000 /* 256M */ 396 #define CONFIG_SYS_PCI2_MMIO_BASE \ 397 (CONFIG_SYS_PCI2_MEM_BASE + CONFIG_SYS_PCI2_MEM_SIZE) 398 #define CONFIG_SYS_PCI2_MMIO_PHYS CONFIG_SYS_PCI2_MMIO_BASE 399 #define CONFIG_SYS_PCI2_MMIO_SIZE 0x10000000 /* 256M */ 400 #define CONFIG_SYS_PCI2_IO_BASE 0x00000000 401 #define CONFIG_SYS_PCI2_IO_PHYS \ 402 (CONFIG_SYS_PCI1_IO_PHYS + CONFIG_SYS_PCI1_IO_SIZE) 403 #define CONFIG_SYS_PCI2_IO_SIZE 0x01000000 /* 16M */ 404 #endif 405 406 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 407 408 #ifndef CONFIG_PCI_PNP 409 #define PCI_ENET0_IOADDR 0x00000000 410 #define PCI_ENET0_MEMADDR CONFIG_SYS_PCI2_MEM_BASE 411 #define PCI_IDSEL_NUMBER 0x0f /* IDSEL = AD15 */ 412 #endif 413 414 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 415 416 #endif 417 418 #define CONFIG_PCI_66M 419 #ifdef CONFIG_PCI_66M 420 #define CONFIG_83XX_CLKIN 66666666 /* in Hz */ 421 #else 422 #define CONFIG_83XX_CLKIN 33333333 /* in Hz */ 423 #endif 424 425 /* TSEC */ 426 427 #ifdef CONFIG_TSEC_ENET 428 429 #define CONFIG_MII 430 #define CONFIG_PHY_GIGE /* In case CONFIG_CMD_MII is specified */ 431 432 #define CONFIG_TSEC1 433 434 #ifdef CONFIG_TSEC1 435 #define CONFIG_HAS_ETH0 436 #define CONFIG_TSEC1_NAME "TSEC0" 437 #define CONFIG_SYS_TSEC1_OFFSET 0x24000 438 #define TSEC1_PHY_ADDR 0x1c /* VSC8201 uses address 0x1c */ 439 #define TSEC1_PHYIDX 0 440 #define TSEC1_FLAGS TSEC_GIGABIT 441 #endif 442 443 #ifdef CONFIG_TSEC2 444 #define CONFIG_HAS_ETH1 445 #define CONFIG_TSEC2_NAME "TSEC1" 446 #define CONFIG_SYS_TSEC2_OFFSET 0x25000 447 448 #define TSEC2_PHY_ADDR 4 449 #define TSEC2_PHYIDX 0 450 #define TSEC2_FLAGS TSEC_GIGABIT 451 #endif 452 453 #define CONFIG_ETHPRIME "Freescale TSEC" 454 455 #endif 456 457 /* 458 * Environment 459 */ 460 #define CONFIG_ENV_OVERWRITE 461 462 #ifndef CONFIG_SYS_RAMBOOT 463 #define CONFIG_ENV_IS_IN_FLASH 464 #define CONFIG_ENV_ADDR \ 465 (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) 466 #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K (one sector) for environment */ 467 #define CONFIG_ENV_SIZE 0x2000 468 #else 469 #define CONFIG_SYS_NO_FLASH /* Flash is not usable now */ 470 #undef CONFIG_FLASH_CFI_DRIVER 471 #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ 472 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) 473 #define CONFIG_ENV_SIZE 0x2000 474 #endif 475 476 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 477 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 478 479 /* 480 * BOOTP options 481 */ 482 #define CONFIG_BOOTP_BOOTFILESIZE 483 #define CONFIG_BOOTP_BOOTPATH 484 #define CONFIG_BOOTP_GATEWAY 485 #define CONFIG_BOOTP_HOSTNAME 486 487 /* 488 * Command line configuration. 489 */ 490 #define CONFIG_CMD_DATE 491 #define CONFIG_CMD_IRQ 492 #define CONFIG_CMD_SDRAM 493 494 #if defined(CONFIG_COMPACT_FLASH) || defined(CONFIG_SATA_SIL3114) \ 495 || defined(CONFIG_USB_STORAGE) 496 #define CONFIG_DOS_PARTITION 497 #define CONFIG_SUPPORT_VFAT 498 #endif 499 500 #ifdef CONFIG_COMPACT_FLASH 501 #define CONFIG_CMD_IDE 502 #endif 503 504 #ifdef CONFIG_SATA_SIL3114 505 #define CONFIG_CMD_SATA 506 #endif 507 508 #if defined(CONFIG_SATA_SIL3114) || defined(CONFIG_USB_STORAGE) 509 #endif 510 511 #ifdef CONFIG_PCI 512 #define CONFIG_CMD_PCI 513 #endif 514 515 /* Watchdog */ 516 #undef CONFIG_WATCHDOG /* watchdog disabled */ 517 518 /* 519 * Miscellaneous configurable options 520 */ 521 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 522 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 523 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 524 525 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 526 #define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */ 527 528 #if defined(CONFIG_CMD_KGDB) 529 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 530 #else 531 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 532 #endif 533 534 /* Print Buffer Size */ 535 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 536 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 537 /* Boot Argument Buffer Size */ 538 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 539 540 /* 541 * For booting Linux, the board info and command line data 542 * have to be in the first 256 MB of memory, since this is 543 * the maximum mapped by the Linux kernel during initialization. 544 */ 545 /* Initial Memory map for Linux*/ 546 #define CONFIG_SYS_BOOTMAPSZ (256 << 20) 547 548 #define CONFIG_SYS_HRCW_LOW (\ 549 HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ 550 HRCWL_DDR_TO_SCB_CLK_1X1 |\ 551 HRCWL_CSB_TO_CLKIN_4X1 |\ 552 HRCWL_VCO_1X2 |\ 553 HRCWL_CORE_TO_CSB_2X1) 554 555 #ifdef CONFIG_SYS_LOWBOOT 556 #define CONFIG_SYS_HRCW_HIGH (\ 557 HRCWH_PCI_HOST |\ 558 HRCWH_32_BIT_PCI |\ 559 HRCWH_PCI1_ARBITER_ENABLE |\ 560 HRCWH_PCI2_ARBITER_ENABLE |\ 561 HRCWH_CORE_ENABLE |\ 562 HRCWH_FROM_0X00000100 |\ 563 HRCWH_BOOTSEQ_DISABLE |\ 564 HRCWH_SW_WATCHDOG_DISABLE |\ 565 HRCWH_ROM_LOC_LOCAL_16BIT |\ 566 HRCWH_TSEC1M_IN_GMII |\ 567 HRCWH_TSEC2M_IN_GMII) 568 #else 569 #define CONFIG_SYS_HRCW_HIGH (\ 570 HRCWH_PCI_HOST |\ 571 HRCWH_32_BIT_PCI |\ 572 HRCWH_PCI1_ARBITER_ENABLE |\ 573 HRCWH_PCI2_ARBITER_ENABLE |\ 574 HRCWH_CORE_ENABLE |\ 575 HRCWH_FROM_0XFFF00100 |\ 576 HRCWH_BOOTSEQ_DISABLE |\ 577 HRCWH_SW_WATCHDOG_DISABLE |\ 578 HRCWH_ROM_LOC_LOCAL_16BIT |\ 579 HRCWH_TSEC1M_IN_GMII |\ 580 HRCWH_TSEC2M_IN_GMII) 581 #endif 582 583 /* 584 * System performance 585 */ 586 #define CONFIG_SYS_ACR_PIPE_DEP 3 /* Arbiter pipeline depth (0-3) */ 587 #define CONFIG_SYS_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */ 588 #define CONFIG_SYS_SPCR_TSEC1EP 3 /* TSEC1 emergency priority (0-3) */ 589 #define CONFIG_SYS_SPCR_TSEC2EP 3 /* TSEC2 emergency priority (0-3) */ 590 #define CONFIG_SYS_SCCR_TSEC1CM 1 /* TSEC1 clock mode (0-3) */ 591 #define CONFIG_SYS_SCCR_TSEC2CM 1 /* TSEC2 & I2C0 clock mode (0-3) */ 592 #define CONFIG_SYS_SCCR_USBMPHCM 3 /* USB MPH controller's clock */ 593 #define CONFIG_SYS_SCCR_USBDRCM 0 /* USB DR controller's clock */ 594 595 /* 596 * System IO Config 597 */ 598 /* Needed for gigabit to work on TSEC 1 */ 599 #define CONFIG_SYS_SICRH SICRH_TSOBI1 600 /* USB DR as device + USB MPH as host */ 601 #define CONFIG_SYS_SICRL (SICRL_LDP_A | SICRL_USB1) 602 603 #define CONFIG_SYS_HID0_INIT 0x00000000 604 #define CONFIG_SYS_HID0_FINAL HID0_ENABLE_INSTRUCTION_CACHE 605 606 #define CONFIG_SYS_HID2 HID2_HBE 607 #define CONFIG_HIGH_BATS 1 /* High BATs supported */ 608 609 /* DDR */ 610 #define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE \ 611 | BATL_PP_RW \ 612 | BATL_MEMCOHERENCE) 613 #define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE \ 614 | BATU_BL_256M \ 615 | BATU_VS \ 616 | BATU_VP) 617 618 /* PCI */ 619 #ifdef CONFIG_PCI 620 #define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCI1_MEM_BASE \ 621 | BATL_PP_RW \ 622 | BATL_MEMCOHERENCE) 623 #define CONFIG_SYS_IBAT1U (CONFIG_SYS_PCI1_MEM_BASE \ 624 | BATU_BL_256M \ 625 | BATU_VS \ 626 | BATU_VP) 627 #define CONFIG_SYS_IBAT2L (CONFIG_SYS_PCI1_MMIO_BASE \ 628 | BATL_PP_RW \ 629 | BATL_CACHEINHIBIT \ 630 | BATL_GUARDEDSTORAGE) 631 #define CONFIG_SYS_IBAT2U (CONFIG_SYS_PCI1_MMIO_BASE \ 632 | BATU_BL_256M \ 633 | BATU_VS \ 634 | BATU_VP) 635 #else 636 #define CONFIG_SYS_IBAT1L 0 637 #define CONFIG_SYS_IBAT1U 0 638 #define CONFIG_SYS_IBAT2L 0 639 #define CONFIG_SYS_IBAT2U 0 640 #endif 641 642 #ifdef CONFIG_MPC83XX_PCI2 643 #define CONFIG_SYS_IBAT3L (CONFIG_SYS_PCI2_MEM_BASE \ 644 | BATL_PP_RW \ 645 | BATL_MEMCOHERENCE) 646 #define CONFIG_SYS_IBAT3U (CONFIG_SYS_PCI2_MEM_BASE \ 647 | BATU_BL_256M \ 648 | BATU_VS \ 649 | BATU_VP) 650 #define CONFIG_SYS_IBAT4L (CONFIG_SYS_PCI2_MMIO_BASE \ 651 | BATL_PP_RW \ 652 | BATL_CACHEINHIBIT \ 653 | BATL_GUARDEDSTORAGE) 654 #define CONFIG_SYS_IBAT4U (CONFIG_SYS_PCI2_MMIO_BASE \ 655 | BATU_BL_256M \ 656 | BATU_VS \ 657 | BATU_VP) 658 #else 659 #define CONFIG_SYS_IBAT3L 0 660 #define CONFIG_SYS_IBAT3U 0 661 #define CONFIG_SYS_IBAT4L 0 662 #define CONFIG_SYS_IBAT4U 0 663 #endif 664 665 /* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */ 666 #define CONFIG_SYS_IBAT5L (CONFIG_SYS_IMMR \ 667 | BATL_PP_RW \ 668 | BATL_CACHEINHIBIT \ 669 | BATL_GUARDEDSTORAGE) 670 #define CONFIG_SYS_IBAT5U (CONFIG_SYS_IMMR \ 671 | BATU_BL_256M \ 672 | BATU_VS \ 673 | BATU_VP) 674 675 /* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */ 676 #define CONFIG_SYS_IBAT6L (0xF0000000 \ 677 | BATL_PP_RW \ 678 | BATL_MEMCOHERENCE \ 679 | BATL_GUARDEDSTORAGE) 680 #define CONFIG_SYS_IBAT6U (0xF0000000 \ 681 | BATU_BL_256M \ 682 | BATU_VS \ 683 | BATU_VP) 684 685 #define CONFIG_SYS_IBAT7L 0 686 #define CONFIG_SYS_IBAT7U 0 687 688 #define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L 689 #define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U 690 #define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L 691 #define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U 692 #define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L 693 #define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U 694 #define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L 695 #define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U 696 #define CONFIG_SYS_DBAT4L CONFIG_SYS_IBAT4L 697 #define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U 698 #define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L 699 #define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U 700 #define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L 701 #define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U 702 #define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L 703 #define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U 704 705 #if defined(CONFIG_CMD_KGDB) 706 #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ 707 #endif 708 709 /* 710 * Environment Configuration 711 */ 712 #define CONFIG_ENV_OVERWRITE 713 714 #define CONFIG_NETDEV "eth0" 715 716 #ifdef CONFIG_MPC8349ITX 717 #define CONFIG_HOSTNAME "mpc8349emitx" 718 #else 719 #define CONFIG_HOSTNAME "mpc8349emitxgp" 720 #endif 721 722 /* Default path and filenames */ 723 #define CONFIG_ROOTPATH "/nfsroot/rootfs" 724 #define CONFIG_BOOTFILE "uImage" 725 /* U-Boot image on TFTP server */ 726 #define CONFIG_UBOOTPATH "u-boot.bin" 727 728 #ifdef CONFIG_MPC8349ITX 729 #define CONFIG_FDTFILE "mpc8349emitx.dtb" 730 #else 731 #define CONFIG_FDTFILE "mpc8349emitxgp.dtb" 732 #endif 733 734 735 #define CONFIG_BOOTARGS \ 736 "root=/dev/nfs rw" \ 737 " nfsroot=" __stringify(CONFIG_SERVERIP) ":" CONFIG_ROOTPATH \ 738 " ip=" __stringify(CONFIG_IPADDR) ":" \ 739 __stringify(CONFIG_SERVERIP) ":" \ 740 __stringify(CONFIG_GATEWAYIP) ":" \ 741 __stringify(CONFIG_NETMASK) ":" \ 742 CONFIG_HOSTNAME ":" CONFIG_NETDEV ":off" \ 743 " console=" __stringify(CONFIG_CONSOLE) "," __stringify(CONFIG_BAUDRATE) 744 745 #define CONFIG_EXTRA_ENV_SETTINGS \ 746 "console=" __stringify(CONFIG_CONSOLE) "\0" \ 747 "netdev=" CONFIG_NETDEV "\0" \ 748 "uboot=" CONFIG_UBOOTPATH "\0" \ 749 "tftpflash=tftpboot $loadaddr $uboot; " \ 750 "protect off " __stringify(CONFIG_SYS_TEXT_BASE) \ 751 " +$filesize; " \ 752 "erase " __stringify(CONFIG_SYS_TEXT_BASE) \ 753 " +$filesize; " \ 754 "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \ 755 " $filesize; " \ 756 "protect on " __stringify(CONFIG_SYS_TEXT_BASE) \ 757 " +$filesize; " \ 758 "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \ 759 " $filesize\0" \ 760 "fdtaddr=780000\0" \ 761 "fdtfile=" CONFIG_FDTFILE "\0" 762 763 #define CONFIG_NFSBOOTCOMMAND \ 764 "setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath" \ 765 " ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off "\ 766 " console=$console,$baudrate $othbootargs; " \ 767 "tftp $loadaddr $bootfile;" \ 768 "tftp $fdtaddr $fdtfile;" \ 769 "bootm $loadaddr - $fdtaddr" 770 771 #define CONFIG_RAMBOOTCOMMAND \ 772 "setenv bootargs root=/dev/ram rw" \ 773 " console=$console,$baudrate $othbootargs; " \ 774 "tftp $ramdiskaddr $ramdiskfile;" \ 775 "tftp $loadaddr $bootfile;" \ 776 "tftp $fdtaddr $fdtfile;" \ 777 "bootm $loadaddr $ramdiskaddr $fdtaddr" 778 779 #endif 780