1 /* 2 * Copyright (C) Freescale Semiconductor, Inc. 2006. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 /* 8 MPC8349E-mITX and MPC8349E-mITX-GP board configuration file 9 10 Memory map: 11 12 0x0000_0000-0x0FFF_FFFF DDR SDRAM (256 MB) 13 0x8000_0000-0x9FFF_FFFF PCI1 memory space (512 MB) 14 0xA000_0000-0xBFFF_FFFF PCI2 memory space (512 MB) 15 0xE000_0000-0xEFFF_FFFF IMMR (1 MB) 16 0xE200_0000-0xE2FF_FFFF PCI1 I/O space (16 MB) 17 0xE300_0000-0xE3FF_FFFF PCI2 I/O space (16 MB) 18 0xF000_0000-0xF000_FFFF Compact Flash (MPC8349E-mITX only) 19 0xF001_0000-0xF001_FFFF Local bus expansion slot 20 0xF800_0000-0xF801_FFFF Vitesse 7385 Parallel Interface (MPC8349E-mITX only) 21 0xFE00_0000-0xFE7F_FFFF First 8MB bank of Flash memory 22 0xFE80_0000-0xFEFF_FFFF Second 8MB bank of Flash memory (MPC8349E-mITX only) 23 24 I2C address list: 25 Align. Board 26 Bus Addr Part No. Description Length Location 27 ---------------------------------------------------------------- 28 I2C0 0x50 M24256-BWMN6P Board EEPROM 2 U64 29 30 I2C1 0x20 PCF8574 I2C Expander 0 U8 31 I2C1 0x21 PCF8574 I2C Expander 0 U10 32 I2C1 0x38 PCF8574A I2C Expander 0 U8 33 I2C1 0x39 PCF8574A I2C Expander 0 U10 34 I2C1 0x51 (DDR) DDR EEPROM 1 U1 35 I2C1 0x68 DS1339 RTC 1 U68 36 37 Note that a given board has *either* a pair of 8574s or a pair of 8574As. 38 */ 39 40 #ifndef __CONFIG_H 41 #define __CONFIG_H 42 43 #if (CONFIG_SYS_TEXT_BASE == 0xFE000000) 44 #define CONFIG_SYS_LOWBOOT 45 #endif 46 47 /* 48 * High Level Configuration Options 49 */ 50 #define CONFIG_MPC834x /* MPC834x family (8343, 8347, 8349) */ 51 #define CONFIG_MPC8349 /* MPC8349 specific */ 52 53 #ifndef CONFIG_SYS_TEXT_BASE 54 #define CONFIG_SYS_TEXT_BASE 0xFEF00000 55 #endif 56 57 #define CONFIG_SYS_IMMR 0xE0000000 /* The IMMR is relocated to here */ 58 59 #define CONFIG_MISC_INIT_F 60 #define CONFIG_MISC_INIT_R 61 62 /* 63 * On-board devices 64 */ 65 66 #ifdef CONFIG_MPC8349ITX 67 /* The CF card interface on the back of the board */ 68 #define CONFIG_COMPACT_FLASH 69 #define CONFIG_VSC7385_ENET /* VSC7385 ethernet support */ 70 #define CONFIG_SATA_SIL3114 /* SIL3114 SATA controller */ 71 #define CONFIG_SYS_USB_HOST /* use the EHCI USB controller */ 72 #endif 73 74 #define CONFIG_RTC_DS1337 75 #define CONFIG_SYS_I2C 76 #define CONFIG_TSEC_ENET /* TSEC Ethernet support */ 77 78 /* 79 * Device configurations 80 */ 81 82 /* I2C */ 83 #ifdef CONFIG_SYS_I2C 84 #define CONFIG_SYS_I2C_FSL 85 #define CONFIG_SYS_FSL_I2C_SPEED 400000 86 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 87 #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 88 #define CONFIG_SYS_FSL_I2C2_SPEED 400000 89 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 90 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 91 92 #define CONFIG_SYS_SPD_BUS_NUM 1 /* The I2C bus for SPD */ 93 #define CONFIG_SYS_RTC_BUS_NUM 1 /* The I2C bus for RTC */ 94 95 #define CONFIG_SYS_I2C_8574_ADDR1 0x20 /* I2C1, PCF8574 */ 96 #define CONFIG_SYS_I2C_8574_ADDR2 0x21 /* I2C1, PCF8574 */ 97 #define CONFIG_SYS_I2C_8574A_ADDR1 0x38 /* I2C1, PCF8574A */ 98 #define CONFIG_SYS_I2C_8574A_ADDR2 0x39 /* I2C1, PCF8574A */ 99 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* I2C0, Board EEPROM */ 100 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 /* I2C1, DS1339 RTC*/ 101 #define SPD_EEPROM_ADDRESS 0x51 /* I2C1, DDR */ 102 103 /* Don't probe these addresses: */ 104 #define CONFIG_SYS_I2C_NOPROBES { {1, CONFIG_SYS_I2C_8574_ADDR1}, \ 105 {1, CONFIG_SYS_I2C_8574_ADDR2}, \ 106 {1, CONFIG_SYS_I2C_8574A_ADDR1}, \ 107 {1, CONFIG_SYS_I2C_8574A_ADDR2} } 108 /* Bit definitions for the 8574[A] I2C expander */ 109 /* Board revision, 00=0.0, 01=0.1, 10=1.0 */ 110 #define I2C_8574_REVISION 0x03 111 #define I2C_8574_CF 0x08 /* 1=Compact flash absent, 0=present */ 112 #define I2C_8574_MPCICLKRN 0x10 /* MiniPCI Clk Run */ 113 #define I2C_8574_PCI66 0x20 /* 0=33MHz PCI, 1=66MHz PCI */ 114 #define I2C_8574_FLASHSIDE 0x40 /* 0=Reset vector from U4, 1=from U7*/ 115 116 #endif 117 118 /* Compact Flash */ 119 #ifdef CONFIG_COMPACT_FLASH 120 121 #define CONFIG_SYS_IDE_MAXBUS 1 122 #define CONFIG_SYS_IDE_MAXDEVICE 1 123 124 #define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 125 #define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_CF_BASE 126 #define CONFIG_SYS_ATA_DATA_OFFSET 0x0000 127 #define CONFIG_SYS_ATA_REG_OFFSET 0 128 #define CONFIG_SYS_ATA_ALT_OFFSET 0x0200 129 #define CONFIG_SYS_ATA_STRIDE 2 130 131 /* If a CF card is not inserted, time out quickly */ 132 #define ATA_RESET_TIME 1 133 134 #endif 135 136 /* 137 * SATA 138 */ 139 #ifdef CONFIG_SATA_SIL3114 140 141 #define CONFIG_SYS_SATA_MAX_DEVICE 4 142 #define CONFIG_LIBATA 143 #define CONFIG_LBA48 144 145 #endif 146 147 #ifdef CONFIG_SYS_USB_HOST 148 /* 149 * Support USB 150 */ 151 #define CONFIG_USB_EHCI_FSL 152 153 /* Current USB implementation supports the only USB controller, 154 * so we have to choose between the MPH or the DR ones */ 155 #if 1 156 #define CONFIG_HAS_FSL_MPH_USB 157 #else 158 #define CONFIG_HAS_FSL_DR_USB 159 #endif 160 161 #endif 162 163 /* 164 * DDR Setup 165 */ 166 #define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory*/ 167 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE 168 #define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE 169 #define CONFIG_SYS_83XX_DDR_USES_CS0 170 #define CONFIG_SYS_MEMTEST_START 0x1000 /* memtest region */ 171 #define CONFIG_SYS_MEMTEST_END 0x2000 172 173 #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN \ 174 | DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075) 175 176 #define CONFIG_VERY_BIG_RAM 177 #define CONFIG_MAX_MEM_MAPPED ((phys_size_t)256 << 20) 178 179 #ifdef CONFIG_SYS_I2C 180 #define CONFIG_SPD_EEPROM /* use SPD EEPROM for DDR setup*/ 181 #endif 182 183 /* No SPD? Then manually set up DDR parameters */ 184 #ifndef CONFIG_SPD_EEPROM 185 #define CONFIG_SYS_DDR_SIZE 256 /* Mb */ 186 #define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN \ 187 | CSCONFIG_ROW_BIT_13 \ 188 | CSCONFIG_COL_BIT_10) 189 190 #define CONFIG_SYS_DDR_TIMING_1 0x26242321 191 #define CONFIG_SYS_DDR_TIMING_2 0x00000800 /* P9-45, may need tuning */ 192 #endif 193 194 /* 195 *Flash on the Local Bus 196 */ 197 198 #define CONFIG_SYS_FLASH_CFI /* use the Common Flash Interface */ 199 #define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */ 200 #define CONFIG_SYS_FLASH_BASE 0xFE000000 /* start of FLASH */ 201 #define CONFIG_SYS_FLASH_EMPTY_INFO 202 /* 127 64KB sectors + 8 8KB sectors per device */ 203 #define CONFIG_SYS_MAX_FLASH_SECT 135 204 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 205 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 206 #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT 207 208 /* The ITX has two flash chips, but the ITX-GP has only one. To support both 209 boards, we say we have two, but don't display a message if we find only one. */ 210 #define CONFIG_SYS_FLASH_QUIET_TEST 211 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ 212 #define CONFIG_SYS_FLASH_BANKS_LIST \ 213 {CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE + 0x800000} 214 #define CONFIG_SYS_FLASH_SIZE 16 /* FLASH size in MB */ 215 #define CONFIG_SYS_FLASH_PROTECTION 1 /* Use h/w Flash protection. */ 216 217 /* Vitesse 7385 */ 218 219 #ifdef CONFIG_VSC7385_ENET 220 221 #define CONFIG_TSEC2 222 223 /* The flash address and size of the VSC7385 firmware image */ 224 #define CONFIG_VSC7385_IMAGE 0xFEFFE000 225 #define CONFIG_VSC7385_IMAGE_SIZE 8192 226 227 #endif 228 229 /* 230 * BRx, ORx, LBLAWBARx, and LBLAWARx 231 */ 232 233 /* Flash */ 234 235 #define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ 236 | BR_PS_16 \ 237 | BR_MS_GPCM \ 238 | BR_V) 239 #define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \ 240 | OR_UPM_XAM \ 241 | OR_GPCM_CSNT \ 242 | OR_GPCM_ACS_DIV2 \ 243 | OR_GPCM_XACS \ 244 | OR_GPCM_SCY_15 \ 245 | OR_GPCM_TRLX_SET \ 246 | OR_GPCM_EHTR_SET \ 247 | OR_GPCM_EAD) 248 #define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE 249 #define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_16MB) 250 251 /* Vitesse 7385 */ 252 253 #define CONFIG_SYS_VSC7385_BASE 0xF8000000 254 255 #ifdef CONFIG_VSC7385_ENET 256 257 #define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_VSC7385_BASE \ 258 | BR_PS_8 \ 259 | BR_MS_GPCM \ 260 | BR_V) 261 #define CONFIG_SYS_OR1_PRELIM (OR_AM_128KB \ 262 | OR_GPCM_CSNT \ 263 | OR_GPCM_XACS \ 264 | OR_GPCM_SCY_15 \ 265 | OR_GPCM_SETA \ 266 | OR_GPCM_TRLX_SET \ 267 | OR_GPCM_EHTR_SET \ 268 | OR_GPCM_EAD) 269 270 #define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_VSC7385_BASE 271 #define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_128KB) 272 273 #endif 274 275 /* LED */ 276 277 #define CONFIG_SYS_LED_BASE 0xF9000000 278 #define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_LED_BASE \ 279 | BR_PS_8 \ 280 | BR_MS_GPCM \ 281 | BR_V) 282 #define CONFIG_SYS_OR2_PRELIM (OR_AM_2MB \ 283 | OR_GPCM_CSNT \ 284 | OR_GPCM_ACS_DIV2 \ 285 | OR_GPCM_XACS \ 286 | OR_GPCM_SCY_9 \ 287 | OR_GPCM_TRLX_SET \ 288 | OR_GPCM_EHTR_SET \ 289 | OR_GPCM_EAD) 290 291 /* Compact Flash */ 292 293 #ifdef CONFIG_COMPACT_FLASH 294 295 #define CONFIG_SYS_CF_BASE 0xF0000000 296 297 #define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_CF_BASE \ 298 | BR_PS_16 \ 299 | BR_MS_UPMA \ 300 | BR_V) 301 #define CONFIG_SYS_OR3_PRELIM (OR_UPM_AM | OR_UPM_BI) 302 303 #define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_CF_BASE 304 #define CONFIG_SYS_LBLAWAR3_PRELIM (LBLAWAR_EN | LBLAWAR_64KB) 305 306 #endif 307 308 /* 309 * U-Boot memory configuration 310 */ 311 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 312 313 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) 314 #define CONFIG_SYS_RAMBOOT 315 #else 316 #undef CONFIG_SYS_RAMBOOT 317 #endif 318 319 #define CONFIG_SYS_INIT_RAM_LOCK 320 #define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM addr */ 321 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM*/ 322 323 #define CONFIG_SYS_GBL_DATA_OFFSET \ 324 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 325 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 326 327 /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */ 328 #define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Mon */ 329 #define CONFIG_SYS_MALLOC_LEN (256 * 1024) /* Reserved for malloc */ 330 331 /* 332 * Local Bus LCRR and LBCR regs 333 * LCRR: DLL bypass, Clock divider is 4 334 * External Local Bus rate is 335 * CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV 336 */ 337 #define CONFIG_SYS_LCRR_DBYP LCRR_DBYP 338 #define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4 339 #define CONFIG_SYS_LBC_LBCR 0x00000000 340 341 /* LB sdram refresh timer, about 6us */ 342 #define CONFIG_SYS_LBC_LSRT 0x32000000 343 /* LB refresh timer prescal, 266MHz/32*/ 344 #define CONFIG_SYS_LBC_MRTPR 0x20000000 345 346 /* 347 * Serial Port 348 */ 349 #define CONFIG_CONS_INDEX 1 350 #define CONFIG_SYS_NS16550_SERIAL 351 #define CONFIG_SYS_NS16550_REG_SIZE 1 352 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 353 354 #define CONFIG_SYS_BAUDRATE_TABLE \ 355 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} 356 357 #define CONSOLE ttyS0 358 359 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x4500) 360 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x4600) 361 362 /* 363 * PCI 364 */ 365 #ifdef CONFIG_PCI 366 #define CONFIG_PCI_INDIRECT_BRIDGE 367 368 #define CONFIG_MPC83XX_PCI2 369 370 /* 371 * General PCI 372 * Addresses are mapped 1-1. 373 */ 374 #define CONFIG_SYS_PCI1_MEM_BASE 0x80000000 375 #define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE 376 #define CONFIG_SYS_PCI1_MEM_SIZE 0x10000000 /* 256M */ 377 #define CONFIG_SYS_PCI1_MMIO_BASE \ 378 (CONFIG_SYS_PCI1_MEM_BASE + CONFIG_SYS_PCI1_MEM_SIZE) 379 #define CONFIG_SYS_PCI1_MMIO_PHYS CONFIG_SYS_PCI1_MMIO_BASE 380 #define CONFIG_SYS_PCI1_MMIO_SIZE 0x10000000 /* 256M */ 381 #define CONFIG_SYS_PCI1_IO_BASE 0x00000000 382 #define CONFIG_SYS_PCI1_IO_PHYS 0xE2000000 383 #define CONFIG_SYS_PCI1_IO_SIZE 0x01000000 /* 16M */ 384 385 #ifdef CONFIG_MPC83XX_PCI2 386 #define CONFIG_SYS_PCI2_MEM_BASE \ 387 (CONFIG_SYS_PCI1_MMIO_BASE + CONFIG_SYS_PCI1_MMIO_SIZE) 388 #define CONFIG_SYS_PCI2_MEM_PHYS CONFIG_SYS_PCI2_MEM_BASE 389 #define CONFIG_SYS_PCI2_MEM_SIZE 0x10000000 /* 256M */ 390 #define CONFIG_SYS_PCI2_MMIO_BASE \ 391 (CONFIG_SYS_PCI2_MEM_BASE + CONFIG_SYS_PCI2_MEM_SIZE) 392 #define CONFIG_SYS_PCI2_MMIO_PHYS CONFIG_SYS_PCI2_MMIO_BASE 393 #define CONFIG_SYS_PCI2_MMIO_SIZE 0x10000000 /* 256M */ 394 #define CONFIG_SYS_PCI2_IO_BASE 0x00000000 395 #define CONFIG_SYS_PCI2_IO_PHYS \ 396 (CONFIG_SYS_PCI1_IO_PHYS + CONFIG_SYS_PCI1_IO_SIZE) 397 #define CONFIG_SYS_PCI2_IO_SIZE 0x01000000 /* 16M */ 398 #endif 399 400 #ifndef CONFIG_PCI_PNP 401 #define PCI_ENET0_IOADDR 0x00000000 402 #define PCI_ENET0_MEMADDR CONFIG_SYS_PCI2_MEM_BASE 403 #define PCI_IDSEL_NUMBER 0x0f /* IDSEL = AD15 */ 404 #endif 405 406 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 407 408 #endif 409 410 #define CONFIG_PCI_66M 411 #ifdef CONFIG_PCI_66M 412 #define CONFIG_83XX_CLKIN 66666666 /* in Hz */ 413 #else 414 #define CONFIG_83XX_CLKIN 33333333 /* in Hz */ 415 #endif 416 417 /* TSEC */ 418 419 #ifdef CONFIG_TSEC_ENET 420 421 #define CONFIG_MII 422 #define CONFIG_PHY_GIGE /* In case CONFIG_CMD_MII is specified */ 423 424 #define CONFIG_TSEC1 425 426 #ifdef CONFIG_TSEC1 427 #define CONFIG_HAS_ETH0 428 #define CONFIG_TSEC1_NAME "TSEC0" 429 #define CONFIG_SYS_TSEC1_OFFSET 0x24000 430 #define TSEC1_PHY_ADDR 0x1c /* VSC8201 uses address 0x1c */ 431 #define TSEC1_PHYIDX 0 432 #define TSEC1_FLAGS TSEC_GIGABIT 433 #endif 434 435 #ifdef CONFIG_TSEC2 436 #define CONFIG_HAS_ETH1 437 #define CONFIG_TSEC2_NAME "TSEC1" 438 #define CONFIG_SYS_TSEC2_OFFSET 0x25000 439 440 #define TSEC2_PHY_ADDR 4 441 #define TSEC2_PHYIDX 0 442 #define TSEC2_FLAGS TSEC_GIGABIT 443 #endif 444 445 #define CONFIG_ETHPRIME "Freescale TSEC" 446 447 #endif 448 449 /* 450 * Environment 451 */ 452 #define CONFIG_ENV_OVERWRITE 453 454 #ifndef CONFIG_SYS_RAMBOOT 455 #define CONFIG_ENV_IS_IN_FLASH 456 #define CONFIG_ENV_ADDR \ 457 (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) 458 #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K (one sector) for environment */ 459 #define CONFIG_ENV_SIZE 0x2000 460 #else 461 #undef CONFIG_FLASH_CFI_DRIVER 462 #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ 463 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) 464 #define CONFIG_ENV_SIZE 0x2000 465 #endif 466 467 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 468 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 469 470 /* 471 * BOOTP options 472 */ 473 #define CONFIG_BOOTP_BOOTFILESIZE 474 #define CONFIG_BOOTP_BOOTPATH 475 #define CONFIG_BOOTP_GATEWAY 476 #define CONFIG_BOOTP_HOSTNAME 477 478 /* 479 * Command line configuration. 480 */ 481 #define CONFIG_CMD_SDRAM 482 483 #if defined(CONFIG_COMPACT_FLASH) || defined(CONFIG_SATA_SIL3114) \ 484 || defined(CONFIG_USB_STORAGE) 485 #define CONFIG_SUPPORT_VFAT 486 #endif 487 488 #ifdef CONFIG_SATA_SIL3114 489 #define CONFIG_CMD_SATA 490 #endif 491 492 #if defined(CONFIG_SATA_SIL3114) || defined(CONFIG_USB_STORAGE) 493 #endif 494 495 #ifdef CONFIG_PCI 496 #define CONFIG_CMD_PCI 497 #endif 498 499 /* Watchdog */ 500 #undef CONFIG_WATCHDOG /* watchdog disabled */ 501 502 /* 503 * Miscellaneous configurable options 504 */ 505 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 506 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 507 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 508 509 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 510 #define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */ 511 512 #if defined(CONFIG_CMD_KGDB) 513 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 514 #else 515 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 516 #endif 517 518 /* Print Buffer Size */ 519 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 520 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 521 /* Boot Argument Buffer Size */ 522 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 523 524 /* 525 * For booting Linux, the board info and command line data 526 * have to be in the first 256 MB of memory, since this is 527 * the maximum mapped by the Linux kernel during initialization. 528 */ 529 /* Initial Memory map for Linux*/ 530 #define CONFIG_SYS_BOOTMAPSZ (256 << 20) 531 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 532 533 #define CONFIG_SYS_HRCW_LOW (\ 534 HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ 535 HRCWL_DDR_TO_SCB_CLK_1X1 |\ 536 HRCWL_CSB_TO_CLKIN_4X1 |\ 537 HRCWL_VCO_1X2 |\ 538 HRCWL_CORE_TO_CSB_2X1) 539 540 #ifdef CONFIG_SYS_LOWBOOT 541 #define CONFIG_SYS_HRCW_HIGH (\ 542 HRCWH_PCI_HOST |\ 543 HRCWH_32_BIT_PCI |\ 544 HRCWH_PCI1_ARBITER_ENABLE |\ 545 HRCWH_PCI2_ARBITER_ENABLE |\ 546 HRCWH_CORE_ENABLE |\ 547 HRCWH_FROM_0X00000100 |\ 548 HRCWH_BOOTSEQ_DISABLE |\ 549 HRCWH_SW_WATCHDOG_DISABLE |\ 550 HRCWH_ROM_LOC_LOCAL_16BIT |\ 551 HRCWH_TSEC1M_IN_GMII |\ 552 HRCWH_TSEC2M_IN_GMII) 553 #else 554 #define CONFIG_SYS_HRCW_HIGH (\ 555 HRCWH_PCI_HOST |\ 556 HRCWH_32_BIT_PCI |\ 557 HRCWH_PCI1_ARBITER_ENABLE |\ 558 HRCWH_PCI2_ARBITER_ENABLE |\ 559 HRCWH_CORE_ENABLE |\ 560 HRCWH_FROM_0XFFF00100 |\ 561 HRCWH_BOOTSEQ_DISABLE |\ 562 HRCWH_SW_WATCHDOG_DISABLE |\ 563 HRCWH_ROM_LOC_LOCAL_16BIT |\ 564 HRCWH_TSEC1M_IN_GMII |\ 565 HRCWH_TSEC2M_IN_GMII) 566 #endif 567 568 /* 569 * System performance 570 */ 571 #define CONFIG_SYS_ACR_PIPE_DEP 3 /* Arbiter pipeline depth (0-3) */ 572 #define CONFIG_SYS_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */ 573 #define CONFIG_SYS_SPCR_TSEC1EP 3 /* TSEC1 emergency priority (0-3) */ 574 #define CONFIG_SYS_SPCR_TSEC2EP 3 /* TSEC2 emergency priority (0-3) */ 575 #define CONFIG_SYS_SCCR_TSEC1CM 1 /* TSEC1 clock mode (0-3) */ 576 #define CONFIG_SYS_SCCR_TSEC2CM 1 /* TSEC2 & I2C0 clock mode (0-3) */ 577 #define CONFIG_SYS_SCCR_USBMPHCM 3 /* USB MPH controller's clock */ 578 #define CONFIG_SYS_SCCR_USBDRCM 0 /* USB DR controller's clock */ 579 580 /* 581 * System IO Config 582 */ 583 /* Needed for gigabit to work on TSEC 1 */ 584 #define CONFIG_SYS_SICRH SICRH_TSOBI1 585 /* USB DR as device + USB MPH as host */ 586 #define CONFIG_SYS_SICRL (SICRL_LDP_A | SICRL_USB1) 587 588 #define CONFIG_SYS_HID0_INIT 0x00000000 589 #define CONFIG_SYS_HID0_FINAL HID0_ENABLE_INSTRUCTION_CACHE 590 591 #define CONFIG_SYS_HID2 HID2_HBE 592 #define CONFIG_HIGH_BATS 1 /* High BATs supported */ 593 594 /* DDR */ 595 #define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE \ 596 | BATL_PP_RW \ 597 | BATL_MEMCOHERENCE) 598 #define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE \ 599 | BATU_BL_256M \ 600 | BATU_VS \ 601 | BATU_VP) 602 603 /* PCI */ 604 #ifdef CONFIG_PCI 605 #define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCI1_MEM_BASE \ 606 | BATL_PP_RW \ 607 | BATL_MEMCOHERENCE) 608 #define CONFIG_SYS_IBAT1U (CONFIG_SYS_PCI1_MEM_BASE \ 609 | BATU_BL_256M \ 610 | BATU_VS \ 611 | BATU_VP) 612 #define CONFIG_SYS_IBAT2L (CONFIG_SYS_PCI1_MMIO_BASE \ 613 | BATL_PP_RW \ 614 | BATL_CACHEINHIBIT \ 615 | BATL_GUARDEDSTORAGE) 616 #define CONFIG_SYS_IBAT2U (CONFIG_SYS_PCI1_MMIO_BASE \ 617 | BATU_BL_256M \ 618 | BATU_VS \ 619 | BATU_VP) 620 #else 621 #define CONFIG_SYS_IBAT1L 0 622 #define CONFIG_SYS_IBAT1U 0 623 #define CONFIG_SYS_IBAT2L 0 624 #define CONFIG_SYS_IBAT2U 0 625 #endif 626 627 #ifdef CONFIG_MPC83XX_PCI2 628 #define CONFIG_SYS_IBAT3L (CONFIG_SYS_PCI2_MEM_BASE \ 629 | BATL_PP_RW \ 630 | BATL_MEMCOHERENCE) 631 #define CONFIG_SYS_IBAT3U (CONFIG_SYS_PCI2_MEM_BASE \ 632 | BATU_BL_256M \ 633 | BATU_VS \ 634 | BATU_VP) 635 #define CONFIG_SYS_IBAT4L (CONFIG_SYS_PCI2_MMIO_BASE \ 636 | BATL_PP_RW \ 637 | BATL_CACHEINHIBIT \ 638 | BATL_GUARDEDSTORAGE) 639 #define CONFIG_SYS_IBAT4U (CONFIG_SYS_PCI2_MMIO_BASE \ 640 | BATU_BL_256M \ 641 | BATU_VS \ 642 | BATU_VP) 643 #else 644 #define CONFIG_SYS_IBAT3L 0 645 #define CONFIG_SYS_IBAT3U 0 646 #define CONFIG_SYS_IBAT4L 0 647 #define CONFIG_SYS_IBAT4U 0 648 #endif 649 650 /* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */ 651 #define CONFIG_SYS_IBAT5L (CONFIG_SYS_IMMR \ 652 | BATL_PP_RW \ 653 | BATL_CACHEINHIBIT \ 654 | BATL_GUARDEDSTORAGE) 655 #define CONFIG_SYS_IBAT5U (CONFIG_SYS_IMMR \ 656 | BATU_BL_256M \ 657 | BATU_VS \ 658 | BATU_VP) 659 660 /* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */ 661 #define CONFIG_SYS_IBAT6L (0xF0000000 \ 662 | BATL_PP_RW \ 663 | BATL_MEMCOHERENCE \ 664 | BATL_GUARDEDSTORAGE) 665 #define CONFIG_SYS_IBAT6U (0xF0000000 \ 666 | BATU_BL_256M \ 667 | BATU_VS \ 668 | BATU_VP) 669 670 #define CONFIG_SYS_IBAT7L 0 671 #define CONFIG_SYS_IBAT7U 0 672 673 #define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L 674 #define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U 675 #define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L 676 #define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U 677 #define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L 678 #define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U 679 #define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L 680 #define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U 681 #define CONFIG_SYS_DBAT4L CONFIG_SYS_IBAT4L 682 #define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U 683 #define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L 684 #define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U 685 #define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L 686 #define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U 687 #define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L 688 #define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U 689 690 #if defined(CONFIG_CMD_KGDB) 691 #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ 692 #endif 693 694 /* 695 * Environment Configuration 696 */ 697 #define CONFIG_ENV_OVERWRITE 698 699 #define CONFIG_NETDEV "eth0" 700 701 #ifdef CONFIG_MPC8349ITX 702 #define CONFIG_HOSTNAME "mpc8349emitx" 703 #else 704 #define CONFIG_HOSTNAME "mpc8349emitxgp" 705 #endif 706 707 /* Default path and filenames */ 708 #define CONFIG_ROOTPATH "/nfsroot/rootfs" 709 #define CONFIG_BOOTFILE "uImage" 710 /* U-Boot image on TFTP server */ 711 #define CONFIG_UBOOTPATH "u-boot.bin" 712 713 #ifdef CONFIG_MPC8349ITX 714 #define CONFIG_FDTFILE "mpc8349emitx.dtb" 715 #else 716 #define CONFIG_FDTFILE "mpc8349emitxgp.dtb" 717 #endif 718 719 720 #define CONFIG_BOOTARGS \ 721 "root=/dev/nfs rw" \ 722 " nfsroot=" __stringify(CONFIG_SERVERIP) ":" CONFIG_ROOTPATH \ 723 " ip=" __stringify(CONFIG_IPADDR) ":" \ 724 __stringify(CONFIG_SERVERIP) ":" \ 725 __stringify(CONFIG_GATEWAYIP) ":" \ 726 __stringify(CONFIG_NETMASK) ":" \ 727 CONFIG_HOSTNAME ":" CONFIG_NETDEV ":off" \ 728 " console=" __stringify(CONSOLE) "," __stringify(CONFIG_BAUDRATE) 729 730 #define CONFIG_EXTRA_ENV_SETTINGS \ 731 "console=" __stringify(CONSOLE) "\0" \ 732 "netdev=" CONFIG_NETDEV "\0" \ 733 "uboot=" CONFIG_UBOOTPATH "\0" \ 734 "tftpflash=tftpboot $loadaddr $uboot; " \ 735 "protect off " __stringify(CONFIG_SYS_TEXT_BASE) \ 736 " +$filesize; " \ 737 "erase " __stringify(CONFIG_SYS_TEXT_BASE) \ 738 " +$filesize; " \ 739 "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \ 740 " $filesize; " \ 741 "protect on " __stringify(CONFIG_SYS_TEXT_BASE) \ 742 " +$filesize; " \ 743 "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \ 744 " $filesize\0" \ 745 "fdtaddr=780000\0" \ 746 "fdtfile=" CONFIG_FDTFILE "\0" 747 748 #define CONFIG_NFSBOOTCOMMAND \ 749 "setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath" \ 750 " ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off "\ 751 " console=$console,$baudrate $othbootargs; " \ 752 "tftp $loadaddr $bootfile;" \ 753 "tftp $fdtaddr $fdtfile;" \ 754 "bootm $loadaddr - $fdtaddr" 755 756 #define CONFIG_RAMBOOTCOMMAND \ 757 "setenv bootargs root=/dev/ram rw" \ 758 " console=$console,$baudrate $othbootargs; " \ 759 "tftp $ramdiskaddr $ramdiskfile;" \ 760 "tftp $loadaddr $bootfile;" \ 761 "tftp $fdtaddr $fdtfile;" \ 762 "bootm $loadaddr $ramdiskaddr $fdtaddr" 763 764 #endif 765