1 /* 2 * Copyright (C) Freescale Semiconductor, Inc. 2006. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 /* 8 MPC8349E-mITX and MPC8349E-mITX-GP board configuration file 9 10 Memory map: 11 12 0x0000_0000-0x0FFF_FFFF DDR SDRAM (256 MB) 13 0x8000_0000-0x9FFF_FFFF PCI1 memory space (512 MB) 14 0xA000_0000-0xBFFF_FFFF PCI2 memory space (512 MB) 15 0xE000_0000-0xEFFF_FFFF IMMR (1 MB) 16 0xE200_0000-0xE2FF_FFFF PCI1 I/O space (16 MB) 17 0xE300_0000-0xE3FF_FFFF PCI2 I/O space (16 MB) 18 0xF000_0000-0xF000_FFFF Compact Flash (MPC8349E-mITX only) 19 0xF001_0000-0xF001_FFFF Local bus expansion slot 20 0xF800_0000-0xF801_FFFF Vitesse 7385 Parallel Interface (MPC8349E-mITX only) 21 0xFE00_0000-0xFE7F_FFFF First 8MB bank of Flash memory 22 0xFE80_0000-0xFEFF_FFFF Second 8MB bank of Flash memory (MPC8349E-mITX only) 23 24 I2C address list: 25 Align. Board 26 Bus Addr Part No. Description Length Location 27 ---------------------------------------------------------------- 28 I2C0 0x50 M24256-BWMN6P Board EEPROM 2 U64 29 30 I2C1 0x20 PCF8574 I2C Expander 0 U8 31 I2C1 0x21 PCF8574 I2C Expander 0 U10 32 I2C1 0x38 PCF8574A I2C Expander 0 U8 33 I2C1 0x39 PCF8574A I2C Expander 0 U10 34 I2C1 0x51 (DDR) DDR EEPROM 1 U1 35 I2C1 0x68 DS1339 RTC 1 U68 36 37 Note that a given board has *either* a pair of 8574s or a pair of 8574As. 38 */ 39 40 #ifndef __CONFIG_H 41 #define __CONFIG_H 42 43 #define CONFIG_DISPLAY_BOARDINFO 44 45 #if (CONFIG_SYS_TEXT_BASE == 0xFE000000) 46 #define CONFIG_SYS_LOWBOOT 47 #endif 48 49 /* 50 * High Level Configuration Options 51 */ 52 #define CONFIG_MPC834x /* MPC834x family (8343, 8347, 8349) */ 53 #define CONFIG_MPC8349 /* MPC8349 specific */ 54 55 #ifndef CONFIG_SYS_TEXT_BASE 56 #define CONFIG_SYS_TEXT_BASE 0xFEF00000 57 #endif 58 59 #define CONFIG_SYS_IMMR 0xE0000000 /* The IMMR is relocated to here */ 60 61 #define CONFIG_MISC_INIT_F 62 #define CONFIG_MISC_INIT_R 63 64 /* 65 * On-board devices 66 */ 67 68 #ifdef CONFIG_MPC8349ITX 69 /* The CF card interface on the back of the board */ 70 #define CONFIG_COMPACT_FLASH 71 #define CONFIG_VSC7385_ENET /* VSC7385 ethernet support */ 72 #define CONFIG_SATA_SIL3114 /* SIL3114 SATA controller */ 73 #define CONFIG_SYS_USB_HOST /* use the EHCI USB controller */ 74 #endif 75 76 #define CONFIG_PCI 77 #define CONFIG_RTC_DS1337 78 #define CONFIG_SYS_I2C 79 #define CONFIG_TSEC_ENET /* TSEC Ethernet support */ 80 81 /* 82 * Device configurations 83 */ 84 85 /* I2C */ 86 #ifdef CONFIG_SYS_I2C 87 #define CONFIG_SYS_I2C_FSL 88 #define CONFIG_SYS_FSL_I2C_SPEED 400000 89 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 90 #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 91 #define CONFIG_SYS_FSL_I2C2_SPEED 400000 92 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 93 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 94 95 #define CONFIG_SYS_SPD_BUS_NUM 1 /* The I2C bus for SPD */ 96 #define CONFIG_SYS_RTC_BUS_NUM 1 /* The I2C bus for RTC */ 97 98 #define CONFIG_SYS_I2C_8574_ADDR1 0x20 /* I2C1, PCF8574 */ 99 #define CONFIG_SYS_I2C_8574_ADDR2 0x21 /* I2C1, PCF8574 */ 100 #define CONFIG_SYS_I2C_8574A_ADDR1 0x38 /* I2C1, PCF8574A */ 101 #define CONFIG_SYS_I2C_8574A_ADDR2 0x39 /* I2C1, PCF8574A */ 102 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* I2C0, Board EEPROM */ 103 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 /* I2C1, DS1339 RTC*/ 104 #define SPD_EEPROM_ADDRESS 0x51 /* I2C1, DDR */ 105 106 /* Don't probe these addresses: */ 107 #define CONFIG_SYS_I2C_NOPROBES { {1, CONFIG_SYS_I2C_8574_ADDR1}, \ 108 {1, CONFIG_SYS_I2C_8574_ADDR2}, \ 109 {1, CONFIG_SYS_I2C_8574A_ADDR1}, \ 110 {1, CONFIG_SYS_I2C_8574A_ADDR2} } 111 /* Bit definitions for the 8574[A] I2C expander */ 112 /* Board revision, 00=0.0, 01=0.1, 10=1.0 */ 113 #define I2C_8574_REVISION 0x03 114 #define I2C_8574_CF 0x08 /* 1=Compact flash absent, 0=present */ 115 #define I2C_8574_MPCICLKRN 0x10 /* MiniPCI Clk Run */ 116 #define I2C_8574_PCI66 0x20 /* 0=33MHz PCI, 1=66MHz PCI */ 117 #define I2C_8574_FLASHSIDE 0x40 /* 0=Reset vector from U4, 1=from U7*/ 118 119 #endif 120 121 /* Compact Flash */ 122 #ifdef CONFIG_COMPACT_FLASH 123 124 #define CONFIG_SYS_IDE_MAXBUS 1 125 #define CONFIG_SYS_IDE_MAXDEVICE 1 126 127 #define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 128 #define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_CF_BASE 129 #define CONFIG_SYS_ATA_DATA_OFFSET 0x0000 130 #define CONFIG_SYS_ATA_REG_OFFSET 0 131 #define CONFIG_SYS_ATA_ALT_OFFSET 0x0200 132 #define CONFIG_SYS_ATA_STRIDE 2 133 134 /* If a CF card is not inserted, time out quickly */ 135 #define ATA_RESET_TIME 1 136 137 #endif 138 139 /* 140 * SATA 141 */ 142 #ifdef CONFIG_SATA_SIL3114 143 144 #define CONFIG_SYS_SATA_MAX_DEVICE 4 145 #define CONFIG_LIBATA 146 #define CONFIG_LBA48 147 148 #endif 149 150 #ifdef CONFIG_SYS_USB_HOST 151 /* 152 * Support USB 153 */ 154 #define CONFIG_CMD_USB 155 #define CONFIG_USB_STORAGE 156 #define CONFIG_USB_EHCI 157 #define CONFIG_USB_EHCI_FSL 158 159 /* Current USB implementation supports the only USB controller, 160 * so we have to choose between the MPH or the DR ones */ 161 #if 1 162 #define CONFIG_HAS_FSL_MPH_USB 163 #else 164 #define CONFIG_HAS_FSL_DR_USB 165 #endif 166 167 #endif 168 169 /* 170 * DDR Setup 171 */ 172 #define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory*/ 173 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE 174 #define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE 175 #define CONFIG_SYS_83XX_DDR_USES_CS0 176 #define CONFIG_SYS_MEMTEST_START 0x1000 /* memtest region */ 177 #define CONFIG_SYS_MEMTEST_END 0x2000 178 179 #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN \ 180 | DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075) 181 182 #define CONFIG_VERY_BIG_RAM 183 #define CONFIG_MAX_MEM_MAPPED ((phys_size_t)256 << 20) 184 185 #ifdef CONFIG_SYS_I2C 186 #define CONFIG_SPD_EEPROM /* use SPD EEPROM for DDR setup*/ 187 #endif 188 189 /* No SPD? Then manually set up DDR parameters */ 190 #ifndef CONFIG_SPD_EEPROM 191 #define CONFIG_SYS_DDR_SIZE 256 /* Mb */ 192 #define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN \ 193 | CSCONFIG_ROW_BIT_13 \ 194 | CSCONFIG_COL_BIT_10) 195 196 #define CONFIG_SYS_DDR_TIMING_1 0x26242321 197 #define CONFIG_SYS_DDR_TIMING_2 0x00000800 /* P9-45, may need tuning */ 198 #endif 199 200 /* 201 *Flash on the Local Bus 202 */ 203 204 #define CONFIG_SYS_FLASH_CFI /* use the Common Flash Interface */ 205 #define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */ 206 #define CONFIG_SYS_FLASH_BASE 0xFE000000 /* start of FLASH */ 207 #define CONFIG_SYS_FLASH_EMPTY_INFO 208 /* 127 64KB sectors + 8 8KB sectors per device */ 209 #define CONFIG_SYS_MAX_FLASH_SECT 135 210 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 211 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 212 #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT 213 214 /* The ITX has two flash chips, but the ITX-GP has only one. To support both 215 boards, we say we have two, but don't display a message if we find only one. */ 216 #define CONFIG_SYS_FLASH_QUIET_TEST 217 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ 218 #define CONFIG_SYS_FLASH_BANKS_LIST \ 219 {CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE + 0x800000} 220 #define CONFIG_SYS_FLASH_SIZE 16 /* FLASH size in MB */ 221 #define CONFIG_SYS_FLASH_PROTECTION 1 /* Use h/w Flash protection. */ 222 223 /* Vitesse 7385 */ 224 225 #ifdef CONFIG_VSC7385_ENET 226 227 #define CONFIG_TSEC2 228 229 /* The flash address and size of the VSC7385 firmware image */ 230 #define CONFIG_VSC7385_IMAGE 0xFEFFE000 231 #define CONFIG_VSC7385_IMAGE_SIZE 8192 232 233 #endif 234 235 /* 236 * BRx, ORx, LBLAWBARx, and LBLAWARx 237 */ 238 239 /* Flash */ 240 241 #define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ 242 | BR_PS_16 \ 243 | BR_MS_GPCM \ 244 | BR_V) 245 #define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \ 246 | OR_UPM_XAM \ 247 | OR_GPCM_CSNT \ 248 | OR_GPCM_ACS_DIV2 \ 249 | OR_GPCM_XACS \ 250 | OR_GPCM_SCY_15 \ 251 | OR_GPCM_TRLX_SET \ 252 | OR_GPCM_EHTR_SET \ 253 | OR_GPCM_EAD) 254 #define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE 255 #define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_16MB) 256 257 /* Vitesse 7385 */ 258 259 #define CONFIG_SYS_VSC7385_BASE 0xF8000000 260 261 #ifdef CONFIG_VSC7385_ENET 262 263 #define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_VSC7385_BASE \ 264 | BR_PS_8 \ 265 | BR_MS_GPCM \ 266 | BR_V) 267 #define CONFIG_SYS_OR1_PRELIM (OR_AM_128KB \ 268 | OR_GPCM_CSNT \ 269 | OR_GPCM_XACS \ 270 | OR_GPCM_SCY_15 \ 271 | OR_GPCM_SETA \ 272 | OR_GPCM_TRLX_SET \ 273 | OR_GPCM_EHTR_SET \ 274 | OR_GPCM_EAD) 275 276 #define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_VSC7385_BASE 277 #define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_128KB) 278 279 #endif 280 281 /* LED */ 282 283 #define CONFIG_SYS_LED_BASE 0xF9000000 284 #define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_LED_BASE \ 285 | BR_PS_8 \ 286 | BR_MS_GPCM \ 287 | BR_V) 288 #define CONFIG_SYS_OR2_PRELIM (OR_AM_2MB \ 289 | OR_GPCM_CSNT \ 290 | OR_GPCM_ACS_DIV2 \ 291 | OR_GPCM_XACS \ 292 | OR_GPCM_SCY_9 \ 293 | OR_GPCM_TRLX_SET \ 294 | OR_GPCM_EHTR_SET \ 295 | OR_GPCM_EAD) 296 297 /* Compact Flash */ 298 299 #ifdef CONFIG_COMPACT_FLASH 300 301 #define CONFIG_SYS_CF_BASE 0xF0000000 302 303 #define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_CF_BASE \ 304 | BR_PS_16 \ 305 | BR_MS_UPMA \ 306 | BR_V) 307 #define CONFIG_SYS_OR3_PRELIM (OR_UPM_AM | OR_UPM_BI) 308 309 #define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_CF_BASE 310 #define CONFIG_SYS_LBLAWAR3_PRELIM (LBLAWAR_EN | LBLAWAR_64KB) 311 312 #endif 313 314 /* 315 * U-Boot memory configuration 316 */ 317 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 318 319 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) 320 #define CONFIG_SYS_RAMBOOT 321 #else 322 #undef CONFIG_SYS_RAMBOOT 323 #endif 324 325 #define CONFIG_SYS_INIT_RAM_LOCK 326 #define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM addr */ 327 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM*/ 328 329 #define CONFIG_SYS_GBL_DATA_OFFSET \ 330 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 331 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 332 333 /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */ 334 #define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */ 335 #define CONFIG_SYS_MALLOC_LEN (256 * 1024) /* Reserved for malloc */ 336 337 /* 338 * Local Bus LCRR and LBCR regs 339 * LCRR: DLL bypass, Clock divider is 4 340 * External Local Bus rate is 341 * CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV 342 */ 343 #define CONFIG_SYS_LCRR_DBYP LCRR_DBYP 344 #define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4 345 #define CONFIG_SYS_LBC_LBCR 0x00000000 346 347 /* LB sdram refresh timer, about 6us */ 348 #define CONFIG_SYS_LBC_LSRT 0x32000000 349 /* LB refresh timer prescal, 266MHz/32*/ 350 #define CONFIG_SYS_LBC_MRTPR 0x20000000 351 352 /* 353 * Serial Port 354 */ 355 #define CONFIG_CONS_INDEX 1 356 #define CONFIG_SYS_NS16550_SERIAL 357 #define CONFIG_SYS_NS16550_REG_SIZE 1 358 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 359 360 #define CONFIG_SYS_BAUDRATE_TABLE \ 361 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} 362 363 #define CONFIG_CONSOLE ttyS0 364 #define CONFIG_BAUDRATE 115200 365 366 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x4500) 367 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x4600) 368 369 /* pass open firmware flat tree */ 370 #define CONFIG_OF_LIBFDT 1 371 #define CONFIG_OF_BOARD_SETUP 1 372 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 373 374 /* 375 * PCI 376 */ 377 #ifdef CONFIG_PCI 378 #define CONFIG_PCI_INDIRECT_BRIDGE 379 380 #define CONFIG_MPC83XX_PCI2 381 382 /* 383 * General PCI 384 * Addresses are mapped 1-1. 385 */ 386 #define CONFIG_SYS_PCI1_MEM_BASE 0x80000000 387 #define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE 388 #define CONFIG_SYS_PCI1_MEM_SIZE 0x10000000 /* 256M */ 389 #define CONFIG_SYS_PCI1_MMIO_BASE \ 390 (CONFIG_SYS_PCI1_MEM_BASE + CONFIG_SYS_PCI1_MEM_SIZE) 391 #define CONFIG_SYS_PCI1_MMIO_PHYS CONFIG_SYS_PCI1_MMIO_BASE 392 #define CONFIG_SYS_PCI1_MMIO_SIZE 0x10000000 /* 256M */ 393 #define CONFIG_SYS_PCI1_IO_BASE 0x00000000 394 #define CONFIG_SYS_PCI1_IO_PHYS 0xE2000000 395 #define CONFIG_SYS_PCI1_IO_SIZE 0x01000000 /* 16M */ 396 397 #ifdef CONFIG_MPC83XX_PCI2 398 #define CONFIG_SYS_PCI2_MEM_BASE \ 399 (CONFIG_SYS_PCI1_MMIO_BASE + CONFIG_SYS_PCI1_MMIO_SIZE) 400 #define CONFIG_SYS_PCI2_MEM_PHYS CONFIG_SYS_PCI2_MEM_BASE 401 #define CONFIG_SYS_PCI2_MEM_SIZE 0x10000000 /* 256M */ 402 #define CONFIG_SYS_PCI2_MMIO_BASE \ 403 (CONFIG_SYS_PCI2_MEM_BASE + CONFIG_SYS_PCI2_MEM_SIZE) 404 #define CONFIG_SYS_PCI2_MMIO_PHYS CONFIG_SYS_PCI2_MMIO_BASE 405 #define CONFIG_SYS_PCI2_MMIO_SIZE 0x10000000 /* 256M */ 406 #define CONFIG_SYS_PCI2_IO_BASE 0x00000000 407 #define CONFIG_SYS_PCI2_IO_PHYS \ 408 (CONFIG_SYS_PCI1_IO_PHYS + CONFIG_SYS_PCI1_IO_SIZE) 409 #define CONFIG_SYS_PCI2_IO_SIZE 0x01000000 /* 16M */ 410 #endif 411 412 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 413 414 #ifndef CONFIG_PCI_PNP 415 #define PCI_ENET0_IOADDR 0x00000000 416 #define PCI_ENET0_MEMADDR CONFIG_SYS_PCI2_MEM_BASE 417 #define PCI_IDSEL_NUMBER 0x0f /* IDSEL = AD15 */ 418 #endif 419 420 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 421 422 #endif 423 424 #define CONFIG_PCI_66M 425 #ifdef CONFIG_PCI_66M 426 #define CONFIG_83XX_CLKIN 66666666 /* in Hz */ 427 #else 428 #define CONFIG_83XX_CLKIN 33333333 /* in Hz */ 429 #endif 430 431 /* TSEC */ 432 433 #ifdef CONFIG_TSEC_ENET 434 435 #define CONFIG_MII 436 #define CONFIG_PHY_GIGE /* In case CONFIG_CMD_MII is specified */ 437 438 #define CONFIG_TSEC1 439 440 #ifdef CONFIG_TSEC1 441 #define CONFIG_HAS_ETH0 442 #define CONFIG_TSEC1_NAME "TSEC0" 443 #define CONFIG_SYS_TSEC1_OFFSET 0x24000 444 #define TSEC1_PHY_ADDR 0x1c /* VSC8201 uses address 0x1c */ 445 #define TSEC1_PHYIDX 0 446 #define TSEC1_FLAGS TSEC_GIGABIT 447 #endif 448 449 #ifdef CONFIG_TSEC2 450 #define CONFIG_HAS_ETH1 451 #define CONFIG_TSEC2_NAME "TSEC1" 452 #define CONFIG_SYS_TSEC2_OFFSET 0x25000 453 454 #define TSEC2_PHY_ADDR 4 455 #define TSEC2_PHYIDX 0 456 #define TSEC2_FLAGS TSEC_GIGABIT 457 #endif 458 459 #define CONFIG_ETHPRIME "Freescale TSEC" 460 461 #endif 462 463 /* 464 * Environment 465 */ 466 #define CONFIG_ENV_OVERWRITE 467 468 #ifndef CONFIG_SYS_RAMBOOT 469 #define CONFIG_ENV_IS_IN_FLASH 470 #define CONFIG_ENV_ADDR \ 471 (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) 472 #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K (one sector) for environment */ 473 #define CONFIG_ENV_SIZE 0x2000 474 #else 475 #define CONFIG_SYS_NO_FLASH /* Flash is not usable now */ 476 #undef CONFIG_FLASH_CFI_DRIVER 477 #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ 478 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) 479 #define CONFIG_ENV_SIZE 0x2000 480 #endif 481 482 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 483 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 484 485 /* 486 * BOOTP options 487 */ 488 #define CONFIG_BOOTP_BOOTFILESIZE 489 #define CONFIG_BOOTP_BOOTPATH 490 #define CONFIG_BOOTP_GATEWAY 491 #define CONFIG_BOOTP_HOSTNAME 492 493 494 /* 495 * Command line configuration. 496 */ 497 #define CONFIG_CMD_CACHE 498 #define CONFIG_CMD_DATE 499 #define CONFIG_CMD_IRQ 500 #define CONFIG_CMD_PING 501 #define CONFIG_CMD_DHCP 502 #define CONFIG_CMD_SDRAM 503 504 #if defined(CONFIG_COMPACT_FLASH) || defined(CONFIG_SATA_SIL3114) \ 505 || defined(CONFIG_USB_STORAGE) 506 #define CONFIG_DOS_PARTITION 507 #define CONFIG_CMD_FAT 508 #define CONFIG_SUPPORT_VFAT 509 #endif 510 511 #ifdef CONFIG_COMPACT_FLASH 512 #define CONFIG_CMD_IDE 513 #endif 514 515 #ifdef CONFIG_SATA_SIL3114 516 #define CONFIG_CMD_SATA 517 #endif 518 519 #if defined(CONFIG_SATA_SIL3114) || defined(CONFIG_USB_STORAGE) 520 #define CONFIG_CMD_EXT2 521 #endif 522 523 #ifdef CONFIG_PCI 524 #define CONFIG_CMD_PCI 525 #endif 526 527 #ifdef CONFIG_SYS_I2C 528 #define CONFIG_CMD_I2C 529 #endif 530 531 /* Watchdog */ 532 #undef CONFIG_WATCHDOG /* watchdog disabled */ 533 534 /* 535 * Miscellaneous configurable options 536 */ 537 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 538 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 539 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 540 #define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */ 541 542 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 543 #define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */ 544 545 #if defined(CONFIG_CMD_KGDB) 546 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 547 #else 548 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 549 #endif 550 551 /* Print Buffer Size */ 552 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 553 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 554 /* Boot Argument Buffer Size */ 555 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 556 557 /* 558 * For booting Linux, the board info and command line data 559 * have to be in the first 256 MB of memory, since this is 560 * the maximum mapped by the Linux kernel during initialization. 561 */ 562 /* Initial Memory map for Linux*/ 563 #define CONFIG_SYS_BOOTMAPSZ (256 << 20) 564 565 #define CONFIG_SYS_HRCW_LOW (\ 566 HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ 567 HRCWL_DDR_TO_SCB_CLK_1X1 |\ 568 HRCWL_CSB_TO_CLKIN_4X1 |\ 569 HRCWL_VCO_1X2 |\ 570 HRCWL_CORE_TO_CSB_2X1) 571 572 #ifdef CONFIG_SYS_LOWBOOT 573 #define CONFIG_SYS_HRCW_HIGH (\ 574 HRCWH_PCI_HOST |\ 575 HRCWH_32_BIT_PCI |\ 576 HRCWH_PCI1_ARBITER_ENABLE |\ 577 HRCWH_PCI2_ARBITER_ENABLE |\ 578 HRCWH_CORE_ENABLE |\ 579 HRCWH_FROM_0X00000100 |\ 580 HRCWH_BOOTSEQ_DISABLE |\ 581 HRCWH_SW_WATCHDOG_DISABLE |\ 582 HRCWH_ROM_LOC_LOCAL_16BIT |\ 583 HRCWH_TSEC1M_IN_GMII |\ 584 HRCWH_TSEC2M_IN_GMII) 585 #else 586 #define CONFIG_SYS_HRCW_HIGH (\ 587 HRCWH_PCI_HOST |\ 588 HRCWH_32_BIT_PCI |\ 589 HRCWH_PCI1_ARBITER_ENABLE |\ 590 HRCWH_PCI2_ARBITER_ENABLE |\ 591 HRCWH_CORE_ENABLE |\ 592 HRCWH_FROM_0XFFF00100 |\ 593 HRCWH_BOOTSEQ_DISABLE |\ 594 HRCWH_SW_WATCHDOG_DISABLE |\ 595 HRCWH_ROM_LOC_LOCAL_16BIT |\ 596 HRCWH_TSEC1M_IN_GMII |\ 597 HRCWH_TSEC2M_IN_GMII) 598 #endif 599 600 /* 601 * System performance 602 */ 603 #define CONFIG_SYS_ACR_PIPE_DEP 3 /* Arbiter pipeline depth (0-3) */ 604 #define CONFIG_SYS_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */ 605 #define CONFIG_SYS_SPCR_TSEC1EP 3 /* TSEC1 emergency priority (0-3) */ 606 #define CONFIG_SYS_SPCR_TSEC2EP 3 /* TSEC2 emergency priority (0-3) */ 607 #define CONFIG_SYS_SCCR_TSEC1CM 1 /* TSEC1 clock mode (0-3) */ 608 #define CONFIG_SYS_SCCR_TSEC2CM 1 /* TSEC2 & I2C0 clock mode (0-3) */ 609 #define CONFIG_SYS_SCCR_USBMPHCM 3 /* USB MPH controller's clock */ 610 #define CONFIG_SYS_SCCR_USBDRCM 0 /* USB DR controller's clock */ 611 612 /* 613 * System IO Config 614 */ 615 /* Needed for gigabit to work on TSEC 1 */ 616 #define CONFIG_SYS_SICRH SICRH_TSOBI1 617 /* USB DR as device + USB MPH as host */ 618 #define CONFIG_SYS_SICRL (SICRL_LDP_A | SICRL_USB1) 619 620 #define CONFIG_SYS_HID0_INIT 0x00000000 621 #define CONFIG_SYS_HID0_FINAL HID0_ENABLE_INSTRUCTION_CACHE 622 623 #define CONFIG_SYS_HID2 HID2_HBE 624 #define CONFIG_HIGH_BATS 1 /* High BATs supported */ 625 626 /* DDR */ 627 #define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE \ 628 | BATL_PP_RW \ 629 | BATL_MEMCOHERENCE) 630 #define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE \ 631 | BATU_BL_256M \ 632 | BATU_VS \ 633 | BATU_VP) 634 635 /* PCI */ 636 #ifdef CONFIG_PCI 637 #define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCI1_MEM_BASE \ 638 | BATL_PP_RW \ 639 | BATL_MEMCOHERENCE) 640 #define CONFIG_SYS_IBAT1U (CONFIG_SYS_PCI1_MEM_BASE \ 641 | BATU_BL_256M \ 642 | BATU_VS \ 643 | BATU_VP) 644 #define CONFIG_SYS_IBAT2L (CONFIG_SYS_PCI1_MMIO_BASE \ 645 | BATL_PP_RW \ 646 | BATL_CACHEINHIBIT \ 647 | BATL_GUARDEDSTORAGE) 648 #define CONFIG_SYS_IBAT2U (CONFIG_SYS_PCI1_MMIO_BASE \ 649 | BATU_BL_256M \ 650 | BATU_VS \ 651 | BATU_VP) 652 #else 653 #define CONFIG_SYS_IBAT1L 0 654 #define CONFIG_SYS_IBAT1U 0 655 #define CONFIG_SYS_IBAT2L 0 656 #define CONFIG_SYS_IBAT2U 0 657 #endif 658 659 #ifdef CONFIG_MPC83XX_PCI2 660 #define CONFIG_SYS_IBAT3L (CONFIG_SYS_PCI2_MEM_BASE \ 661 | BATL_PP_RW \ 662 | BATL_MEMCOHERENCE) 663 #define CONFIG_SYS_IBAT3U (CONFIG_SYS_PCI2_MEM_BASE \ 664 | BATU_BL_256M \ 665 | BATU_VS \ 666 | BATU_VP) 667 #define CONFIG_SYS_IBAT4L (CONFIG_SYS_PCI2_MMIO_BASE \ 668 | BATL_PP_RW \ 669 | BATL_CACHEINHIBIT \ 670 | BATL_GUARDEDSTORAGE) 671 #define CONFIG_SYS_IBAT4U (CONFIG_SYS_PCI2_MMIO_BASE \ 672 | BATU_BL_256M \ 673 | BATU_VS \ 674 | BATU_VP) 675 #else 676 #define CONFIG_SYS_IBAT3L 0 677 #define CONFIG_SYS_IBAT3U 0 678 #define CONFIG_SYS_IBAT4L 0 679 #define CONFIG_SYS_IBAT4U 0 680 #endif 681 682 /* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */ 683 #define CONFIG_SYS_IBAT5L (CONFIG_SYS_IMMR \ 684 | BATL_PP_RW \ 685 | BATL_CACHEINHIBIT \ 686 | BATL_GUARDEDSTORAGE) 687 #define CONFIG_SYS_IBAT5U (CONFIG_SYS_IMMR \ 688 | BATU_BL_256M \ 689 | BATU_VS \ 690 | BATU_VP) 691 692 /* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */ 693 #define CONFIG_SYS_IBAT6L (0xF0000000 \ 694 | BATL_PP_RW \ 695 | BATL_MEMCOHERENCE \ 696 | BATL_GUARDEDSTORAGE) 697 #define CONFIG_SYS_IBAT6U (0xF0000000 \ 698 | BATU_BL_256M \ 699 | BATU_VS \ 700 | BATU_VP) 701 702 #define CONFIG_SYS_IBAT7L 0 703 #define CONFIG_SYS_IBAT7U 0 704 705 #define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L 706 #define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U 707 #define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L 708 #define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U 709 #define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L 710 #define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U 711 #define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L 712 #define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U 713 #define CONFIG_SYS_DBAT4L CONFIG_SYS_IBAT4L 714 #define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U 715 #define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L 716 #define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U 717 #define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L 718 #define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U 719 #define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L 720 #define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U 721 722 #if defined(CONFIG_CMD_KGDB) 723 #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ 724 #endif 725 726 727 /* 728 * Environment Configuration 729 */ 730 #define CONFIG_ENV_OVERWRITE 731 732 #define CONFIG_NETDEV "eth0" 733 734 #ifdef CONFIG_MPC8349ITX 735 #define CONFIG_HOSTNAME "mpc8349emitx" 736 #else 737 #define CONFIG_HOSTNAME "mpc8349emitxgp" 738 #endif 739 740 /* Default path and filenames */ 741 #define CONFIG_ROOTPATH "/nfsroot/rootfs" 742 #define CONFIG_BOOTFILE "uImage" 743 /* U-Boot image on TFTP server */ 744 #define CONFIG_UBOOTPATH "u-boot.bin" 745 746 #ifdef CONFIG_MPC8349ITX 747 #define CONFIG_FDTFILE "mpc8349emitx.dtb" 748 #else 749 #define CONFIG_FDTFILE "mpc8349emitxgp.dtb" 750 #endif 751 752 #define CONFIG_BOOTDELAY 6 753 754 #define CONFIG_BOOTARGS \ 755 "root=/dev/nfs rw" \ 756 " nfsroot=" __stringify(CONFIG_SERVERIP) ":" CONFIG_ROOTPATH \ 757 " ip=" __stringify(CONFIG_IPADDR) ":" \ 758 __stringify(CONFIG_SERVERIP) ":" \ 759 __stringify(CONFIG_GATEWAYIP) ":" \ 760 __stringify(CONFIG_NETMASK) ":" \ 761 CONFIG_HOSTNAME ":" CONFIG_NETDEV ":off" \ 762 " console=" __stringify(CONFIG_CONSOLE) "," __stringify(CONFIG_BAUDRATE) 763 764 #define CONFIG_EXTRA_ENV_SETTINGS \ 765 "console=" __stringify(CONFIG_CONSOLE) "\0" \ 766 "netdev=" CONFIG_NETDEV "\0" \ 767 "uboot=" CONFIG_UBOOTPATH "\0" \ 768 "tftpflash=tftpboot $loadaddr $uboot; " \ 769 "protect off " __stringify(CONFIG_SYS_TEXT_BASE) \ 770 " +$filesize; " \ 771 "erase " __stringify(CONFIG_SYS_TEXT_BASE) \ 772 " +$filesize; " \ 773 "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \ 774 " $filesize; " \ 775 "protect on " __stringify(CONFIG_SYS_TEXT_BASE) \ 776 " +$filesize; " \ 777 "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \ 778 " $filesize\0" \ 779 "fdtaddr=780000\0" \ 780 "fdtfile=" CONFIG_FDTFILE "\0" 781 782 #define CONFIG_NFSBOOTCOMMAND \ 783 "setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath" \ 784 " ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off "\ 785 " console=$console,$baudrate $othbootargs; " \ 786 "tftp $loadaddr $bootfile;" \ 787 "tftp $fdtaddr $fdtfile;" \ 788 "bootm $loadaddr - $fdtaddr" 789 790 #define CONFIG_RAMBOOTCOMMAND \ 791 "setenv bootargs root=/dev/ram rw" \ 792 " console=$console,$baudrate $othbootargs; " \ 793 "tftp $ramdiskaddr $ramdiskfile;" \ 794 "tftp $loadaddr $bootfile;" \ 795 "tftp $fdtaddr $fdtfile;" \ 796 "bootm $loadaddr $ramdiskaddr $fdtaddr" 797 798 #endif 799