1 /* 2 * Copyright (C) Freescale Semiconductor, Inc. 2006. 3 * 4 * See file CREDITS for list of people who contributed to this 5 * project. 6 * 7 * This program is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU General Public License as 9 * published by the Free Software Foundation; either version 2 of 10 * the License, or (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the Free Software 19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 20 * MA 02111-1307 USA 21 */ 22 23 /* 24 MPC8349E-mITX and MPC8349E-mITX-GP board configuration file 25 26 Memory map: 27 28 0x0000_0000-0x0FFF_FFFF DDR SDRAM (256 MB) 29 0x8000_0000-0x9FFF_FFFF PCI1 memory space (512 MB) 30 0xA000_0000-0xBFFF_FFFF PCI2 memory space (512 MB) 31 0xE000_0000-0xEFFF_FFFF IMMR (1 MB) 32 0xE200_0000-0xE2FF_FFFF PCI1 I/O space (16 MB) 33 0xE300_0000-0xE3FF_FFFF PCI2 I/O space (16 MB) 34 0xF000_0000-0xF000_FFFF Compact Flash (MPC8349E-mITX only) 35 0xF001_0000-0xF001_FFFF Local bus expansion slot 36 0xF800_0000-0xF801_FFFF Vitesse 7385 Parallel Interface (MPC8349E-mITX only) 37 0xFE00_0000-0xFE7F_FFFF First 8MB bank of Flash memory 38 0xFE80_0000-0xFEFF_FFFF Second 8MB bank of Flash memory (MPC8349E-mITX only) 39 40 I2C address list: 41 Align. Board 42 Bus Addr Part No. Description Length Location 43 ---------------------------------------------------------------- 44 I2C0 0x50 M24256-BWMN6P Board EEPROM 2 U64 45 46 I2C1 0x20 PCF8574 I2C Expander 0 U8 47 I2C1 0x21 PCF8574 I2C Expander 0 U10 48 I2C1 0x38 PCF8574A I2C Expander 0 U8 49 I2C1 0x39 PCF8574A I2C Expander 0 U10 50 I2C1 0x51 (DDR) DDR EEPROM 1 U1 51 I2C1 0x68 DS1339 RTC 1 U68 52 53 Note that a given board has *either* a pair of 8574s or a pair of 8574As. 54 */ 55 56 #ifndef __CONFIG_H 57 #define __CONFIG_H 58 59 #if (CONFIG_SYS_TEXT_BASE == 0xFE000000) 60 #define CONFIG_SYS_LOWBOOT 61 #endif 62 63 /* 64 * High Level Configuration Options 65 */ 66 #define CONFIG_MPC83xx 1 67 #define CONFIG_MPC834x /* MPC834x family (8343, 8347, 8349) */ 68 #define CONFIG_MPC8349 /* MPC8349 specific */ 69 70 #ifndef CONFIG_SYS_TEXT_BASE 71 #define CONFIG_SYS_TEXT_BASE 0xFEF00000 72 #endif 73 74 #define CONFIG_SYS_IMMR 0xE0000000 /* The IMMR is relocated to here */ 75 76 #define CONFIG_MISC_INIT_F 77 #define CONFIG_MISC_INIT_R 78 79 /* 80 * On-board devices 81 */ 82 83 #ifdef CONFIG_MPC8349ITX 84 /* The CF card interface on the back of the board */ 85 #define CONFIG_COMPACT_FLASH 86 #define CONFIG_VSC7385_ENET /* VSC7385 ethernet support */ 87 #define CONFIG_SATA_SIL3114 /* SIL3114 SATA controller */ 88 #define CONFIG_SYS_USB_HOST /* use the EHCI USB controller */ 89 #endif 90 91 #define CONFIG_PCI 92 #define CONFIG_RTC_DS1337 93 #define CONFIG_HARD_I2C 94 #define CONFIG_TSEC_ENET /* TSEC Ethernet support */ 95 96 /* 97 * Device configurations 98 */ 99 100 /* I2C */ 101 #ifdef CONFIG_HARD_I2C 102 103 #define CONFIG_FSL_I2C 104 #define CONFIG_I2C_MULTI_BUS 105 #define CONFIG_SYS_I2C_OFFSET 0x3000 106 #define CONFIG_SYS_I2C2_OFFSET 0x3100 107 #define CONFIG_SYS_SPD_BUS_NUM 1 /* The I2C bus for SPD */ 108 #define CONFIG_SYS_RTC_BUS_NUM 1 /* The I2C bus for RTC */ 109 110 #define CONFIG_SYS_I2C_8574_ADDR1 0x20 /* I2C1, PCF8574 */ 111 #define CONFIG_SYS_I2C_8574_ADDR2 0x21 /* I2C1, PCF8574 */ 112 #define CONFIG_SYS_I2C_8574A_ADDR1 0x38 /* I2C1, PCF8574A */ 113 #define CONFIG_SYS_I2C_8574A_ADDR2 0x39 /* I2C1, PCF8574A */ 114 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* I2C0, Board EEPROM */ 115 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 /* I2C1, DS1339 RTC*/ 116 #define SPD_EEPROM_ADDRESS 0x51 /* I2C1, DDR */ 117 118 #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ 119 #define CONFIG_SYS_I2C_SLAVE 0x7F 120 121 /* Don't probe these addresses: */ 122 #define CONFIG_SYS_I2C_NOPROBES { {1, CONFIG_SYS_I2C_8574_ADDR1}, \ 123 {1, CONFIG_SYS_I2C_8574_ADDR2}, \ 124 {1, CONFIG_SYS_I2C_8574A_ADDR1}, \ 125 {1, CONFIG_SYS_I2C_8574A_ADDR2} } 126 /* Bit definitions for the 8574[A] I2C expander */ 127 /* Board revision, 00=0.0, 01=0.1, 10=1.0 */ 128 #define I2C_8574_REVISION 0x03 129 #define I2C_8574_CF 0x08 /* 1=Compact flash absent, 0=present */ 130 #define I2C_8574_MPCICLKRN 0x10 /* MiniPCI Clk Run */ 131 #define I2C_8574_PCI66 0x20 /* 0=33MHz PCI, 1=66MHz PCI */ 132 #define I2C_8574_FLASHSIDE 0x40 /* 0=Reset vector from U4, 1=from U7*/ 133 134 #undef CONFIG_SOFT_I2C 135 136 #endif 137 138 /* Compact Flash */ 139 #ifdef CONFIG_COMPACT_FLASH 140 141 #define CONFIG_SYS_IDE_MAXBUS 1 142 #define CONFIG_SYS_IDE_MAXDEVICE 1 143 144 #define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 145 #define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_CF_BASE 146 #define CONFIG_SYS_ATA_DATA_OFFSET 0x0000 147 #define CONFIG_SYS_ATA_REG_OFFSET 0 148 #define CONFIG_SYS_ATA_ALT_OFFSET 0x0200 149 #define CONFIG_SYS_ATA_STRIDE 2 150 151 /* If a CF card is not inserted, time out quickly */ 152 #define ATA_RESET_TIME 1 153 154 #endif 155 156 /* 157 * SATA 158 */ 159 #ifdef CONFIG_SATA_SIL3114 160 161 #define CONFIG_SYS_SATA_MAX_DEVICE 4 162 #define CONFIG_LIBATA 163 #define CONFIG_LBA48 164 165 #endif 166 167 #ifdef CONFIG_SYS_USB_HOST 168 /* 169 * Support USB 170 */ 171 #define CONFIG_CMD_USB 172 #define CONFIG_USB_STORAGE 173 #define CONFIG_USB_EHCI 174 #define CONFIG_USB_EHCI_FSL 175 176 /* Current USB implementation supports the only USB controller, 177 * so we have to choose between the MPH or the DR ones */ 178 #if 1 179 #define CONFIG_HAS_FSL_MPH_USB 180 #else 181 #define CONFIG_HAS_FSL_DR_USB 182 #endif 183 184 #endif 185 186 /* 187 * DDR Setup 188 */ 189 #define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory*/ 190 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE 191 #define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE 192 #define CONFIG_SYS_83XX_DDR_USES_CS0 193 #define CONFIG_SYS_MEMTEST_START 0x1000 /* memtest region */ 194 #define CONFIG_SYS_MEMTEST_END 0x2000 195 196 #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN \ 197 | DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075) 198 199 #define CONFIG_VERY_BIG_RAM 200 #define CONFIG_MAX_MEM_MAPPED ((phys_size_t)256 << 20) 201 202 #ifdef CONFIG_HARD_I2C 203 #define CONFIG_SPD_EEPROM /* use SPD EEPROM for DDR setup*/ 204 #endif 205 206 /* No SPD? Then manually set up DDR parameters */ 207 #ifndef CONFIG_SPD_EEPROM 208 #define CONFIG_SYS_DDR_SIZE 256 /* Mb */ 209 #define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN \ 210 | CSCONFIG_ROW_BIT_13 \ 211 | CSCONFIG_COL_BIT_10) 212 213 #define CONFIG_SYS_DDR_TIMING_1 0x26242321 214 #define CONFIG_SYS_DDR_TIMING_2 0x00000800 /* P9-45, may need tuning */ 215 #endif 216 217 /* 218 *Flash on the Local Bus 219 */ 220 221 #define CONFIG_SYS_FLASH_CFI /* use the Common Flash Interface */ 222 #define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */ 223 #define CONFIG_SYS_FLASH_BASE 0xFE000000 /* start of FLASH */ 224 #define CONFIG_SYS_FLASH_EMPTY_INFO 225 /* 127 64KB sectors + 8 8KB sectors per device */ 226 #define CONFIG_SYS_MAX_FLASH_SECT 135 227 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 228 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 229 #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT 230 231 /* The ITX has two flash chips, but the ITX-GP has only one. To support both 232 boards, we say we have two, but don't display a message if we find only one. */ 233 #define CONFIG_SYS_FLASH_QUIET_TEST 234 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ 235 #define CONFIG_SYS_FLASH_BANKS_LIST \ 236 {CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE + 0x800000} 237 #define CONFIG_SYS_FLASH_SIZE 16 /* FLASH size in MB */ 238 #define CONFIG_SYS_FLASH_PROTECTION 1 /* Use h/w Flash protection. */ 239 240 /* Vitesse 7385 */ 241 242 #ifdef CONFIG_VSC7385_ENET 243 244 #define CONFIG_TSEC2 245 246 /* The flash address and size of the VSC7385 firmware image */ 247 #define CONFIG_VSC7385_IMAGE 0xFEFFE000 248 #define CONFIG_VSC7385_IMAGE_SIZE 8192 249 250 #endif 251 252 /* 253 * BRx, ORx, LBLAWBARx, and LBLAWARx 254 */ 255 256 /* Flash */ 257 258 #define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ 259 | BR_PS_16 \ 260 | BR_MS_GPCM \ 261 | BR_V) 262 #define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \ 263 | OR_UPM_XAM \ 264 | OR_GPCM_CSNT \ 265 | OR_GPCM_ACS_DIV2 \ 266 | OR_GPCM_XACS \ 267 | OR_GPCM_SCY_15 \ 268 | OR_GPCM_TRLX_SET \ 269 | OR_GPCM_EHTR_SET \ 270 | OR_GPCM_EAD) 271 #define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE 272 #define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_16MB) 273 274 /* Vitesse 7385 */ 275 276 #define CONFIG_SYS_VSC7385_BASE 0xF8000000 277 278 #ifdef CONFIG_VSC7385_ENET 279 280 #define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_VSC7385_BASE \ 281 | BR_PS_8 \ 282 | BR_MS_GPCM \ 283 | BR_V) 284 #define CONFIG_SYS_OR1_PRELIM (OR_AM_128KB \ 285 | OR_GPCM_CSNT \ 286 | OR_GPCM_XACS \ 287 | OR_GPCM_SCY_15 \ 288 | OR_GPCM_SETA \ 289 | OR_GPCM_TRLX_SET \ 290 | OR_GPCM_EHTR_SET \ 291 | OR_GPCM_EAD) 292 293 #define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_VSC7385_BASE 294 #define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_128KB) 295 296 #endif 297 298 /* LED */ 299 300 #define CONFIG_SYS_LED_BASE 0xF9000000 301 #define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_LED_BASE \ 302 | BR_PS_8 \ 303 | BR_MS_GPCM \ 304 | BR_V) 305 #define CONFIG_SYS_OR2_PRELIM (OR_AM_2MB \ 306 | OR_GPCM_CSNT \ 307 | OR_GPCM_ACS_DIV2 \ 308 | OR_GPCM_XACS \ 309 | OR_GPCM_SCY_9 \ 310 | OR_GPCM_TRLX_SET \ 311 | OR_GPCM_EHTR_SET \ 312 | OR_GPCM_EAD) 313 314 /* Compact Flash */ 315 316 #ifdef CONFIG_COMPACT_FLASH 317 318 #define CONFIG_SYS_CF_BASE 0xF0000000 319 320 #define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_CF_BASE \ 321 | BR_PS_16 \ 322 | BR_MS_UPMA \ 323 | BR_V) 324 #define CONFIG_SYS_OR3_PRELIM (OR_UPM_AM | OR_UPM_BI) 325 326 #define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_CF_BASE 327 #define CONFIG_SYS_LBLAWAR3_PRELIM (LBLAWAR_EN | LBLAWAR_64KB) 328 329 #endif 330 331 /* 332 * U-Boot memory configuration 333 */ 334 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 335 336 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) 337 #define CONFIG_SYS_RAMBOOT 338 #else 339 #undef CONFIG_SYS_RAMBOOT 340 #endif 341 342 #define CONFIG_SYS_INIT_RAM_LOCK 343 #define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM addr */ 344 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM*/ 345 346 #define CONFIG_SYS_GBL_DATA_OFFSET \ 347 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 348 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 349 350 /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */ 351 #define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */ 352 #define CONFIG_SYS_MALLOC_LEN (256 * 1024) /* Reserved for malloc */ 353 354 /* 355 * Local Bus LCRR and LBCR regs 356 * LCRR: DLL bypass, Clock divider is 4 357 * External Local Bus rate is 358 * CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV 359 */ 360 #define CONFIG_SYS_LCRR_DBYP LCRR_DBYP 361 #define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4 362 #define CONFIG_SYS_LBC_LBCR 0x00000000 363 364 /* LB sdram refresh timer, about 6us */ 365 #define CONFIG_SYS_LBC_LSRT 0x32000000 366 /* LB refresh timer prescal, 266MHz/32*/ 367 #define CONFIG_SYS_LBC_MRTPR 0x20000000 368 369 /* 370 * Serial Port 371 */ 372 #define CONFIG_CONS_INDEX 1 373 #define CONFIG_SYS_NS16550 374 #define CONFIG_SYS_NS16550_SERIAL 375 #define CONFIG_SYS_NS16550_REG_SIZE 1 376 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 377 378 #define CONFIG_SYS_BAUDRATE_TABLE \ 379 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} 380 381 #define CONFIG_CONSOLE ttyS0 382 #define CONFIG_BAUDRATE 115200 383 384 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x4500) 385 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x4600) 386 387 /* pass open firmware flat tree */ 388 #define CONFIG_OF_LIBFDT 1 389 #define CONFIG_OF_BOARD_SETUP 1 390 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 391 392 /* 393 * PCI 394 */ 395 #ifdef CONFIG_PCI 396 397 #define CONFIG_MPC83XX_PCI2 398 399 /* 400 * General PCI 401 * Addresses are mapped 1-1. 402 */ 403 #define CONFIG_SYS_PCI1_MEM_BASE 0x80000000 404 #define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE 405 #define CONFIG_SYS_PCI1_MEM_SIZE 0x10000000 /* 256M */ 406 #define CONFIG_SYS_PCI1_MMIO_BASE \ 407 (CONFIG_SYS_PCI1_MEM_BASE + CONFIG_SYS_PCI1_MEM_SIZE) 408 #define CONFIG_SYS_PCI1_MMIO_PHYS CONFIG_SYS_PCI1_MMIO_BASE 409 #define CONFIG_SYS_PCI1_MMIO_SIZE 0x10000000 /* 256M */ 410 #define CONFIG_SYS_PCI1_IO_BASE 0x00000000 411 #define CONFIG_SYS_PCI1_IO_PHYS 0xE2000000 412 #define CONFIG_SYS_PCI1_IO_SIZE 0x01000000 /* 16M */ 413 414 #ifdef CONFIG_MPC83XX_PCI2 415 #define CONFIG_SYS_PCI2_MEM_BASE \ 416 (CONFIG_SYS_PCI1_MMIO_BASE + CONFIG_SYS_PCI1_MMIO_SIZE) 417 #define CONFIG_SYS_PCI2_MEM_PHYS CONFIG_SYS_PCI2_MEM_BASE 418 #define CONFIG_SYS_PCI2_MEM_SIZE 0x10000000 /* 256M */ 419 #define CONFIG_SYS_PCI2_MMIO_BASE \ 420 (CONFIG_SYS_PCI2_MEM_BASE + CONFIG_SYS_PCI2_MEM_SIZE) 421 #define CONFIG_SYS_PCI2_MMIO_PHYS CONFIG_SYS_PCI2_MMIO_BASE 422 #define CONFIG_SYS_PCI2_MMIO_SIZE 0x10000000 /* 256M */ 423 #define CONFIG_SYS_PCI2_IO_BASE 0x00000000 424 #define CONFIG_SYS_PCI2_IO_PHYS \ 425 (CONFIG_SYS_PCI1_IO_PHYS + CONFIG_SYS_PCI1_IO_SIZE) 426 #define CONFIG_SYS_PCI2_IO_SIZE 0x01000000 /* 16M */ 427 #endif 428 429 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 430 431 #ifndef CONFIG_PCI_PNP 432 #define PCI_ENET0_IOADDR 0x00000000 433 #define PCI_ENET0_MEMADDR CONFIG_SYS_PCI2_MEM_BASE 434 #define PCI_IDSEL_NUMBER 0x0f /* IDSEL = AD15 */ 435 #endif 436 437 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 438 439 #endif 440 441 #define CONFIG_PCI_66M 442 #ifdef CONFIG_PCI_66M 443 #define CONFIG_83XX_CLKIN 66666666 /* in Hz */ 444 #else 445 #define CONFIG_83XX_CLKIN 33333333 /* in Hz */ 446 #endif 447 448 /* TSEC */ 449 450 #ifdef CONFIG_TSEC_ENET 451 452 #define CONFIG_MII 453 #define CONFIG_PHY_GIGE /* In case CONFIG_CMD_MII is specified */ 454 455 #define CONFIG_TSEC1 456 457 #ifdef CONFIG_TSEC1 458 #define CONFIG_HAS_ETH0 459 #define CONFIG_TSEC1_NAME "TSEC0" 460 #define CONFIG_SYS_TSEC1_OFFSET 0x24000 461 #define TSEC1_PHY_ADDR 0x1c /* VSC8201 uses address 0x1c */ 462 #define TSEC1_PHYIDX 0 463 #define TSEC1_FLAGS TSEC_GIGABIT 464 #endif 465 466 #ifdef CONFIG_TSEC2 467 #define CONFIG_HAS_ETH1 468 #define CONFIG_TSEC2_NAME "TSEC1" 469 #define CONFIG_SYS_TSEC2_OFFSET 0x25000 470 471 #define TSEC2_PHY_ADDR 4 472 #define TSEC2_PHYIDX 0 473 #define TSEC2_FLAGS TSEC_GIGABIT 474 #endif 475 476 #define CONFIG_ETHPRIME "Freescale TSEC" 477 478 #endif 479 480 /* 481 * Environment 482 */ 483 #define CONFIG_ENV_OVERWRITE 484 485 #ifndef CONFIG_SYS_RAMBOOT 486 #define CONFIG_ENV_IS_IN_FLASH 487 #define CONFIG_ENV_ADDR \ 488 (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) 489 #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K (one sector) for environment */ 490 #define CONFIG_ENV_SIZE 0x2000 491 #else 492 #define CONFIG_SYS_NO_FLASH /* Flash is not usable now */ 493 #undef CONFIG_FLASH_CFI_DRIVER 494 #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ 495 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) 496 #define CONFIG_ENV_SIZE 0x2000 497 #endif 498 499 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 500 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 501 502 /* 503 * BOOTP options 504 */ 505 #define CONFIG_BOOTP_BOOTFILESIZE 506 #define CONFIG_BOOTP_BOOTPATH 507 #define CONFIG_BOOTP_GATEWAY 508 #define CONFIG_BOOTP_HOSTNAME 509 510 511 /* 512 * Command line configuration. 513 */ 514 #include <config_cmd_default.h> 515 516 #define CONFIG_CMD_CACHE 517 #define CONFIG_CMD_DATE 518 #define CONFIG_CMD_IRQ 519 #define CONFIG_CMD_NET 520 #define CONFIG_CMD_PING 521 #define CONFIG_CMD_DHCP 522 #define CONFIG_CMD_SDRAM 523 524 #if defined(CONFIG_COMPACT_FLASH) || defined(CONFIG_SATA_SIL3114) \ 525 || defined(CONFIG_USB_STORAGE) 526 #define CONFIG_DOS_PARTITION 527 #define CONFIG_CMD_FAT 528 #define CONFIG_SUPPORT_VFAT 529 #endif 530 531 #ifdef CONFIG_COMPACT_FLASH 532 #define CONFIG_CMD_IDE 533 #endif 534 535 #ifdef CONFIG_SATA_SIL3114 536 #define CONFIG_CMD_SATA 537 #endif 538 539 #if defined(CONFIG_SATA_SIL3114) || defined(CONFIG_USB_STORAGE) 540 #define CONFIG_CMD_EXT2 541 #endif 542 543 #ifdef CONFIG_PCI 544 #define CONFIG_CMD_PCI 545 #endif 546 547 #ifdef CONFIG_HARD_I2C 548 #define CONFIG_CMD_I2C 549 #endif 550 551 /* Watchdog */ 552 #undef CONFIG_WATCHDOG /* watchdog disabled */ 553 554 /* 555 * Miscellaneous configurable options 556 */ 557 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 558 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 559 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 560 #define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */ 561 562 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 563 #define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */ 564 565 #ifdef CONFIG_MPC8349ITX 566 #define CONFIG_SYS_PROMPT "MPC8349E-mITX> " /* Monitor Command Prompt */ 567 #else 568 #define CONFIG_SYS_PROMPT "MPC8349E-mITX-GP> " /* Monitor Command Prompt */ 569 #endif 570 571 #if defined(CONFIG_CMD_KGDB) 572 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 573 #else 574 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 575 #endif 576 577 /* Print Buffer Size */ 578 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 579 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 580 /* Boot Argument Buffer Size */ 581 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 582 #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ 583 584 /* 585 * For booting Linux, the board info and command line data 586 * have to be in the first 256 MB of memory, since this is 587 * the maximum mapped by the Linux kernel during initialization. 588 */ 589 /* Initial Memory map for Linux*/ 590 #define CONFIG_SYS_BOOTMAPSZ (256 << 20) 591 592 #define CONFIG_SYS_HRCW_LOW (\ 593 HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ 594 HRCWL_DDR_TO_SCB_CLK_1X1 |\ 595 HRCWL_CSB_TO_CLKIN_4X1 |\ 596 HRCWL_VCO_1X2 |\ 597 HRCWL_CORE_TO_CSB_2X1) 598 599 #ifdef CONFIG_SYS_LOWBOOT 600 #define CONFIG_SYS_HRCW_HIGH (\ 601 HRCWH_PCI_HOST |\ 602 HRCWH_32_BIT_PCI |\ 603 HRCWH_PCI1_ARBITER_ENABLE |\ 604 HRCWH_PCI2_ARBITER_ENABLE |\ 605 HRCWH_CORE_ENABLE |\ 606 HRCWH_FROM_0X00000100 |\ 607 HRCWH_BOOTSEQ_DISABLE |\ 608 HRCWH_SW_WATCHDOG_DISABLE |\ 609 HRCWH_ROM_LOC_LOCAL_16BIT |\ 610 HRCWH_TSEC1M_IN_GMII |\ 611 HRCWH_TSEC2M_IN_GMII) 612 #else 613 #define CONFIG_SYS_HRCW_HIGH (\ 614 HRCWH_PCI_HOST |\ 615 HRCWH_32_BIT_PCI |\ 616 HRCWH_PCI1_ARBITER_ENABLE |\ 617 HRCWH_PCI2_ARBITER_ENABLE |\ 618 HRCWH_CORE_ENABLE |\ 619 HRCWH_FROM_0XFFF00100 |\ 620 HRCWH_BOOTSEQ_DISABLE |\ 621 HRCWH_SW_WATCHDOG_DISABLE |\ 622 HRCWH_ROM_LOC_LOCAL_16BIT |\ 623 HRCWH_TSEC1M_IN_GMII |\ 624 HRCWH_TSEC2M_IN_GMII) 625 #endif 626 627 /* 628 * System performance 629 */ 630 #define CONFIG_SYS_ACR_PIPE_DEP 3 /* Arbiter pipeline depth (0-3) */ 631 #define CONFIG_SYS_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */ 632 #define CONFIG_SYS_SPCR_TSEC1EP 3 /* TSEC1 emergency priority (0-3) */ 633 #define CONFIG_SYS_SPCR_TSEC2EP 3 /* TSEC2 emergency priority (0-3) */ 634 #define CONFIG_SYS_SCCR_TSEC1CM 1 /* TSEC1 clock mode (0-3) */ 635 #define CONFIG_SYS_SCCR_TSEC2CM 1 /* TSEC2 & I2C0 clock mode (0-3) */ 636 #define CONFIG_SYS_SCCR_USBMPHCM 3 /* USB MPH controller's clock */ 637 #define CONFIG_SYS_SCCR_USBDRCM 0 /* USB DR controller's clock */ 638 639 /* 640 * System IO Config 641 */ 642 /* Needed for gigabit to work on TSEC 1 */ 643 #define CONFIG_SYS_SICRH SICRH_TSOBI1 644 /* USB DR as device + USB MPH as host */ 645 #define CONFIG_SYS_SICRL (SICRL_LDP_A | SICRL_USB1) 646 647 #define CONFIG_SYS_HID0_INIT 0x00000000 648 #define CONFIG_SYS_HID0_FINAL HID0_ENABLE_INSTRUCTION_CACHE 649 650 #define CONFIG_SYS_HID2 HID2_HBE 651 #define CONFIG_HIGH_BATS 1 /* High BATs supported */ 652 653 /* DDR */ 654 #define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE \ 655 | BATL_PP_RW \ 656 | BATL_MEMCOHERENCE) 657 #define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE \ 658 | BATU_BL_256M \ 659 | BATU_VS \ 660 | BATU_VP) 661 662 /* PCI */ 663 #ifdef CONFIG_PCI 664 #define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCI1_MEM_BASE \ 665 | BATL_PP_RW \ 666 | BATL_MEMCOHERENCE) 667 #define CONFIG_SYS_IBAT1U (CONFIG_SYS_PCI1_MEM_BASE \ 668 | BATU_BL_256M \ 669 | BATU_VS \ 670 | BATU_VP) 671 #define CONFIG_SYS_IBAT2L (CONFIG_SYS_PCI1_MMIO_BASE \ 672 | BATL_PP_RW \ 673 | BATL_CACHEINHIBIT \ 674 | BATL_GUARDEDSTORAGE) 675 #define CONFIG_SYS_IBAT2U (CONFIG_SYS_PCI1_MMIO_BASE \ 676 | BATU_BL_256M \ 677 | BATU_VS \ 678 | BATU_VP) 679 #else 680 #define CONFIG_SYS_IBAT1L 0 681 #define CONFIG_SYS_IBAT1U 0 682 #define CONFIG_SYS_IBAT2L 0 683 #define CONFIG_SYS_IBAT2U 0 684 #endif 685 686 #ifdef CONFIG_MPC83XX_PCI2 687 #define CONFIG_SYS_IBAT3L (CONFIG_SYS_PCI2_MEM_BASE \ 688 | BATL_PP_RW \ 689 | BATL_MEMCOHERENCE) 690 #define CONFIG_SYS_IBAT3U (CONFIG_SYS_PCI2_MEM_BASE \ 691 | BATU_BL_256M \ 692 | BATU_VS \ 693 | BATU_VP) 694 #define CONFIG_SYS_IBAT4L (CONFIG_SYS_PCI2_MMIO_BASE \ 695 | BATL_PP_RW \ 696 | BATL_CACHEINHIBIT \ 697 | BATL_GUARDEDSTORAGE) 698 #define CONFIG_SYS_IBAT4U (CONFIG_SYS_PCI2_MMIO_BASE \ 699 | BATU_BL_256M \ 700 | BATU_VS \ 701 | BATU_VP) 702 #else 703 #define CONFIG_SYS_IBAT3L 0 704 #define CONFIG_SYS_IBAT3U 0 705 #define CONFIG_SYS_IBAT4L 0 706 #define CONFIG_SYS_IBAT4U 0 707 #endif 708 709 /* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */ 710 #define CONFIG_SYS_IBAT5L (CONFIG_SYS_IMMR \ 711 | BATL_PP_RW \ 712 | BATL_CACHEINHIBIT \ 713 | BATL_GUARDEDSTORAGE) 714 #define CONFIG_SYS_IBAT5U (CONFIG_SYS_IMMR \ 715 | BATU_BL_256M \ 716 | BATU_VS \ 717 | BATU_VP) 718 719 /* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */ 720 #define CONFIG_SYS_IBAT6L (0xF0000000 \ 721 | BATL_PP_RW \ 722 | BATL_MEMCOHERENCE \ 723 | BATL_GUARDEDSTORAGE) 724 #define CONFIG_SYS_IBAT6U (0xF0000000 \ 725 | BATU_BL_256M \ 726 | BATU_VS \ 727 | BATU_VP) 728 729 #define CONFIG_SYS_IBAT7L 0 730 #define CONFIG_SYS_IBAT7U 0 731 732 #define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L 733 #define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U 734 #define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L 735 #define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U 736 #define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L 737 #define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U 738 #define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L 739 #define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U 740 #define CONFIG_SYS_DBAT4L CONFIG_SYS_IBAT4L 741 #define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U 742 #define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L 743 #define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U 744 #define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L 745 #define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U 746 #define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L 747 #define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U 748 749 #if defined(CONFIG_CMD_KGDB) 750 #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ 751 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ 752 #endif 753 754 755 /* 756 * Environment Configuration 757 */ 758 #define CONFIG_ENV_OVERWRITE 759 760 #define CONFIG_NETDEV "eth0" 761 762 #ifdef CONFIG_MPC8349ITX 763 #define CONFIG_HOSTNAME "mpc8349emitx" 764 #else 765 #define CONFIG_HOSTNAME "mpc8349emitxgp" 766 #endif 767 768 /* Default path and filenames */ 769 #define CONFIG_ROOTPATH "/nfsroot/rootfs" 770 #define CONFIG_BOOTFILE "uImage" 771 /* U-Boot image on TFTP server */ 772 #define CONFIG_UBOOTPATH "u-boot.bin" 773 774 #ifdef CONFIG_MPC8349ITX 775 #define CONFIG_FDTFILE "mpc8349emitx.dtb" 776 #else 777 #define CONFIG_FDTFILE "mpc8349emitxgp.dtb" 778 #endif 779 780 #define CONFIG_BOOTDELAY 6 781 782 #define CONFIG_BOOTARGS \ 783 "root=/dev/nfs rw" \ 784 " nfsroot=" __stringify(CONFIG_SERVERIP) ":" CONFIG_ROOTPATH \ 785 " ip=" __stringify(CONFIG_IPADDR) ":" \ 786 __stringify(CONFIG_SERVERIP) ":" \ 787 __stringify(CONFIG_GATEWAYIP) ":" \ 788 __stringify(CONFIG_NETMASK) ":" \ 789 CONFIG_HOSTNAME ":" CONFIG_NETDEV ":off" \ 790 " console=" __stringify(CONFIG_CONSOLE) "," __stringify(CONFIG_BAUDRATE) 791 792 #define CONFIG_EXTRA_ENV_SETTINGS \ 793 "console=" __stringify(CONFIG_CONSOLE) "\0" \ 794 "netdev=" CONFIG_NETDEV "\0" \ 795 "uboot=" CONFIG_UBOOTPATH "\0" \ 796 "tftpflash=tftpboot $loadaddr $uboot; " \ 797 "protect off " __stringify(CONFIG_SYS_TEXT_BASE) \ 798 " +$filesize; " \ 799 "erase " __stringify(CONFIG_SYS_TEXT_BASE) \ 800 " +$filesize; " \ 801 "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \ 802 " $filesize; " \ 803 "protect on " __stringify(CONFIG_SYS_TEXT_BASE) \ 804 " +$filesize; " \ 805 "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \ 806 " $filesize\0" \ 807 "fdtaddr=780000\0" \ 808 "fdtfile=" CONFIG_FDTFILE "\0" 809 810 #define CONFIG_NFSBOOTCOMMAND \ 811 "setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath" \ 812 " ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off "\ 813 " console=$console,$baudrate $othbootargs; " \ 814 "tftp $loadaddr $bootfile;" \ 815 "tftp $fdtaddr $fdtfile;" \ 816 "bootm $loadaddr - $fdtaddr" 817 818 #define CONFIG_RAMBOOTCOMMAND \ 819 "setenv bootargs root=/dev/ram rw" \ 820 " console=$console,$baudrate $othbootargs; " \ 821 "tftp $ramdiskaddr $ramdiskfile;" \ 822 "tftp $loadaddr $bootfile;" \ 823 "tftp $fdtaddr $fdtfile;" \ 824 "bootm $loadaddr $ramdiskaddr $fdtaddr" 825 826 #endif 827