1 /* 2 * Copyright (C) Freescale Semiconductor, Inc. 2006. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 /* 8 MPC8349E-mITX and MPC8349E-mITX-GP board configuration file 9 10 Memory map: 11 12 0x0000_0000-0x0FFF_FFFF DDR SDRAM (256 MB) 13 0x8000_0000-0x9FFF_FFFF PCI1 memory space (512 MB) 14 0xA000_0000-0xBFFF_FFFF PCI2 memory space (512 MB) 15 0xE000_0000-0xEFFF_FFFF IMMR (1 MB) 16 0xE200_0000-0xE2FF_FFFF PCI1 I/O space (16 MB) 17 0xE300_0000-0xE3FF_FFFF PCI2 I/O space (16 MB) 18 0xF000_0000-0xF000_FFFF Compact Flash (MPC8349E-mITX only) 19 0xF001_0000-0xF001_FFFF Local bus expansion slot 20 0xF800_0000-0xF801_FFFF Vitesse 7385 Parallel Interface (MPC8349E-mITX only) 21 0xFE00_0000-0xFE7F_FFFF First 8MB bank of Flash memory 22 0xFE80_0000-0xFEFF_FFFF Second 8MB bank of Flash memory (MPC8349E-mITX only) 23 24 I2C address list: 25 Align. Board 26 Bus Addr Part No. Description Length Location 27 ---------------------------------------------------------------- 28 I2C0 0x50 M24256-BWMN6P Board EEPROM 2 U64 29 30 I2C1 0x20 PCF8574 I2C Expander 0 U8 31 I2C1 0x21 PCF8574 I2C Expander 0 U10 32 I2C1 0x38 PCF8574A I2C Expander 0 U8 33 I2C1 0x39 PCF8574A I2C Expander 0 U10 34 I2C1 0x51 (DDR) DDR EEPROM 1 U1 35 I2C1 0x68 DS1339 RTC 1 U68 36 37 Note that a given board has *either* a pair of 8574s or a pair of 8574As. 38 */ 39 40 #ifndef __CONFIG_H 41 #define __CONFIG_H 42 43 #if (CONFIG_SYS_TEXT_BASE == 0xFE000000) 44 #define CONFIG_SYS_LOWBOOT 45 #endif 46 47 /* 48 * High Level Configuration Options 49 */ 50 #define CONFIG_MPC834x /* MPC834x family (8343, 8347, 8349) */ 51 #define CONFIG_MPC8349 /* MPC8349 specific */ 52 53 #ifndef CONFIG_SYS_TEXT_BASE 54 #define CONFIG_SYS_TEXT_BASE 0xFEF00000 55 #endif 56 57 #define CONFIG_SYS_IMMR 0xE0000000 /* The IMMR is relocated to here */ 58 59 #define CONFIG_MISC_INIT_F 60 #define CONFIG_MISC_INIT_R 61 62 /* 63 * On-board devices 64 */ 65 66 #ifdef CONFIG_MPC8349ITX 67 /* The CF card interface on the back of the board */ 68 #define CONFIG_COMPACT_FLASH 69 #define CONFIG_VSC7385_ENET /* VSC7385 ethernet support */ 70 #define CONFIG_SATA_SIL3114 /* SIL3114 SATA controller */ 71 #define CONFIG_SYS_USB_HOST /* use the EHCI USB controller */ 72 #endif 73 74 #define CONFIG_PCI 75 #define CONFIG_RTC_DS1337 76 #define CONFIG_SYS_I2C 77 #define CONFIG_TSEC_ENET /* TSEC Ethernet support */ 78 79 /* 80 * Device configurations 81 */ 82 83 /* I2C */ 84 #ifdef CONFIG_SYS_I2C 85 #define CONFIG_SYS_I2C_FSL 86 #define CONFIG_SYS_FSL_I2C_SPEED 400000 87 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 88 #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 89 #define CONFIG_SYS_FSL_I2C2_SPEED 400000 90 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 91 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 92 93 #define CONFIG_SYS_SPD_BUS_NUM 1 /* The I2C bus for SPD */ 94 #define CONFIG_SYS_RTC_BUS_NUM 1 /* The I2C bus for RTC */ 95 96 #define CONFIG_SYS_I2C_8574_ADDR1 0x20 /* I2C1, PCF8574 */ 97 #define CONFIG_SYS_I2C_8574_ADDR2 0x21 /* I2C1, PCF8574 */ 98 #define CONFIG_SYS_I2C_8574A_ADDR1 0x38 /* I2C1, PCF8574A */ 99 #define CONFIG_SYS_I2C_8574A_ADDR2 0x39 /* I2C1, PCF8574A */ 100 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* I2C0, Board EEPROM */ 101 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 /* I2C1, DS1339 RTC*/ 102 #define SPD_EEPROM_ADDRESS 0x51 /* I2C1, DDR */ 103 104 /* Don't probe these addresses: */ 105 #define CONFIG_SYS_I2C_NOPROBES { {1, CONFIG_SYS_I2C_8574_ADDR1}, \ 106 {1, CONFIG_SYS_I2C_8574_ADDR2}, \ 107 {1, CONFIG_SYS_I2C_8574A_ADDR1}, \ 108 {1, CONFIG_SYS_I2C_8574A_ADDR2} } 109 /* Bit definitions for the 8574[A] I2C expander */ 110 /* Board revision, 00=0.0, 01=0.1, 10=1.0 */ 111 #define I2C_8574_REVISION 0x03 112 #define I2C_8574_CF 0x08 /* 1=Compact flash absent, 0=present */ 113 #define I2C_8574_MPCICLKRN 0x10 /* MiniPCI Clk Run */ 114 #define I2C_8574_PCI66 0x20 /* 0=33MHz PCI, 1=66MHz PCI */ 115 #define I2C_8574_FLASHSIDE 0x40 /* 0=Reset vector from U4, 1=from U7*/ 116 117 #endif 118 119 /* Compact Flash */ 120 #ifdef CONFIG_COMPACT_FLASH 121 122 #define CONFIG_SYS_IDE_MAXBUS 1 123 #define CONFIG_SYS_IDE_MAXDEVICE 1 124 125 #define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 126 #define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_CF_BASE 127 #define CONFIG_SYS_ATA_DATA_OFFSET 0x0000 128 #define CONFIG_SYS_ATA_REG_OFFSET 0 129 #define CONFIG_SYS_ATA_ALT_OFFSET 0x0200 130 #define CONFIG_SYS_ATA_STRIDE 2 131 132 /* If a CF card is not inserted, time out quickly */ 133 #define ATA_RESET_TIME 1 134 135 #endif 136 137 /* 138 * SATA 139 */ 140 #ifdef CONFIG_SATA_SIL3114 141 142 #define CONFIG_SYS_SATA_MAX_DEVICE 4 143 #define CONFIG_LIBATA 144 #define CONFIG_LBA48 145 146 #endif 147 148 #ifdef CONFIG_SYS_USB_HOST 149 /* 150 * Support USB 151 */ 152 #define CONFIG_USB_EHCI 153 #define CONFIG_USB_EHCI_FSL 154 155 /* Current USB implementation supports the only USB controller, 156 * so we have to choose between the MPH or the DR ones */ 157 #if 1 158 #define CONFIG_HAS_FSL_MPH_USB 159 #else 160 #define CONFIG_HAS_FSL_DR_USB 161 #endif 162 163 #endif 164 165 /* 166 * DDR Setup 167 */ 168 #define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory*/ 169 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE 170 #define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE 171 #define CONFIG_SYS_83XX_DDR_USES_CS0 172 #define CONFIG_SYS_MEMTEST_START 0x1000 /* memtest region */ 173 #define CONFIG_SYS_MEMTEST_END 0x2000 174 175 #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN \ 176 | DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075) 177 178 #define CONFIG_VERY_BIG_RAM 179 #define CONFIG_MAX_MEM_MAPPED ((phys_size_t)256 << 20) 180 181 #ifdef CONFIG_SYS_I2C 182 #define CONFIG_SPD_EEPROM /* use SPD EEPROM for DDR setup*/ 183 #endif 184 185 /* No SPD? Then manually set up DDR parameters */ 186 #ifndef CONFIG_SPD_EEPROM 187 #define CONFIG_SYS_DDR_SIZE 256 /* Mb */ 188 #define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN \ 189 | CSCONFIG_ROW_BIT_13 \ 190 | CSCONFIG_COL_BIT_10) 191 192 #define CONFIG_SYS_DDR_TIMING_1 0x26242321 193 #define CONFIG_SYS_DDR_TIMING_2 0x00000800 /* P9-45, may need tuning */ 194 #endif 195 196 /* 197 *Flash on the Local Bus 198 */ 199 200 #define CONFIG_SYS_FLASH_CFI /* use the Common Flash Interface */ 201 #define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */ 202 #define CONFIG_SYS_FLASH_BASE 0xFE000000 /* start of FLASH */ 203 #define CONFIG_SYS_FLASH_EMPTY_INFO 204 /* 127 64KB sectors + 8 8KB sectors per device */ 205 #define CONFIG_SYS_MAX_FLASH_SECT 135 206 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 207 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 208 #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT 209 210 /* The ITX has two flash chips, but the ITX-GP has only one. To support both 211 boards, we say we have two, but don't display a message if we find only one. */ 212 #define CONFIG_SYS_FLASH_QUIET_TEST 213 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ 214 #define CONFIG_SYS_FLASH_BANKS_LIST \ 215 {CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE + 0x800000} 216 #define CONFIG_SYS_FLASH_SIZE 16 /* FLASH size in MB */ 217 #define CONFIG_SYS_FLASH_PROTECTION 1 /* Use h/w Flash protection. */ 218 219 /* Vitesse 7385 */ 220 221 #ifdef CONFIG_VSC7385_ENET 222 223 #define CONFIG_TSEC2 224 225 /* The flash address and size of the VSC7385 firmware image */ 226 #define CONFIG_VSC7385_IMAGE 0xFEFFE000 227 #define CONFIG_VSC7385_IMAGE_SIZE 8192 228 229 #endif 230 231 /* 232 * BRx, ORx, LBLAWBARx, and LBLAWARx 233 */ 234 235 /* Flash */ 236 237 #define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ 238 | BR_PS_16 \ 239 | BR_MS_GPCM \ 240 | BR_V) 241 #define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \ 242 | OR_UPM_XAM \ 243 | OR_GPCM_CSNT \ 244 | OR_GPCM_ACS_DIV2 \ 245 | OR_GPCM_XACS \ 246 | OR_GPCM_SCY_15 \ 247 | OR_GPCM_TRLX_SET \ 248 | OR_GPCM_EHTR_SET \ 249 | OR_GPCM_EAD) 250 #define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE 251 #define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_16MB) 252 253 /* Vitesse 7385 */ 254 255 #define CONFIG_SYS_VSC7385_BASE 0xF8000000 256 257 #ifdef CONFIG_VSC7385_ENET 258 259 #define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_VSC7385_BASE \ 260 | BR_PS_8 \ 261 | BR_MS_GPCM \ 262 | BR_V) 263 #define CONFIG_SYS_OR1_PRELIM (OR_AM_128KB \ 264 | OR_GPCM_CSNT \ 265 | OR_GPCM_XACS \ 266 | OR_GPCM_SCY_15 \ 267 | OR_GPCM_SETA \ 268 | OR_GPCM_TRLX_SET \ 269 | OR_GPCM_EHTR_SET \ 270 | OR_GPCM_EAD) 271 272 #define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_VSC7385_BASE 273 #define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_128KB) 274 275 #endif 276 277 /* LED */ 278 279 #define CONFIG_SYS_LED_BASE 0xF9000000 280 #define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_LED_BASE \ 281 | BR_PS_8 \ 282 | BR_MS_GPCM \ 283 | BR_V) 284 #define CONFIG_SYS_OR2_PRELIM (OR_AM_2MB \ 285 | OR_GPCM_CSNT \ 286 | OR_GPCM_ACS_DIV2 \ 287 | OR_GPCM_XACS \ 288 | OR_GPCM_SCY_9 \ 289 | OR_GPCM_TRLX_SET \ 290 | OR_GPCM_EHTR_SET \ 291 | OR_GPCM_EAD) 292 293 /* Compact Flash */ 294 295 #ifdef CONFIG_COMPACT_FLASH 296 297 #define CONFIG_SYS_CF_BASE 0xF0000000 298 299 #define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_CF_BASE \ 300 | BR_PS_16 \ 301 | BR_MS_UPMA \ 302 | BR_V) 303 #define CONFIG_SYS_OR3_PRELIM (OR_UPM_AM | OR_UPM_BI) 304 305 #define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_CF_BASE 306 #define CONFIG_SYS_LBLAWAR3_PRELIM (LBLAWAR_EN | LBLAWAR_64KB) 307 308 #endif 309 310 /* 311 * U-Boot memory configuration 312 */ 313 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 314 315 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) 316 #define CONFIG_SYS_RAMBOOT 317 #else 318 #undef CONFIG_SYS_RAMBOOT 319 #endif 320 321 #define CONFIG_SYS_INIT_RAM_LOCK 322 #define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM addr */ 323 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM*/ 324 325 #define CONFIG_SYS_GBL_DATA_OFFSET \ 326 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 327 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 328 329 /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */ 330 #define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Mon */ 331 #define CONFIG_SYS_MALLOC_LEN (256 * 1024) /* Reserved for malloc */ 332 333 /* 334 * Local Bus LCRR and LBCR regs 335 * LCRR: DLL bypass, Clock divider is 4 336 * External Local Bus rate is 337 * CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV 338 */ 339 #define CONFIG_SYS_LCRR_DBYP LCRR_DBYP 340 #define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4 341 #define CONFIG_SYS_LBC_LBCR 0x00000000 342 343 /* LB sdram refresh timer, about 6us */ 344 #define CONFIG_SYS_LBC_LSRT 0x32000000 345 /* LB refresh timer prescal, 266MHz/32*/ 346 #define CONFIG_SYS_LBC_MRTPR 0x20000000 347 348 /* 349 * Serial Port 350 */ 351 #define CONFIG_CONS_INDEX 1 352 #define CONFIG_SYS_NS16550_SERIAL 353 #define CONFIG_SYS_NS16550_REG_SIZE 1 354 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 355 356 #define CONFIG_SYS_BAUDRATE_TABLE \ 357 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} 358 359 #define CONSOLE ttyS0 360 #define CONFIG_BAUDRATE 115200 361 362 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x4500) 363 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x4600) 364 365 /* 366 * PCI 367 */ 368 #ifdef CONFIG_PCI 369 #define CONFIG_PCI_INDIRECT_BRIDGE 370 371 #define CONFIG_MPC83XX_PCI2 372 373 /* 374 * General PCI 375 * Addresses are mapped 1-1. 376 */ 377 #define CONFIG_SYS_PCI1_MEM_BASE 0x80000000 378 #define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE 379 #define CONFIG_SYS_PCI1_MEM_SIZE 0x10000000 /* 256M */ 380 #define CONFIG_SYS_PCI1_MMIO_BASE \ 381 (CONFIG_SYS_PCI1_MEM_BASE + CONFIG_SYS_PCI1_MEM_SIZE) 382 #define CONFIG_SYS_PCI1_MMIO_PHYS CONFIG_SYS_PCI1_MMIO_BASE 383 #define CONFIG_SYS_PCI1_MMIO_SIZE 0x10000000 /* 256M */ 384 #define CONFIG_SYS_PCI1_IO_BASE 0x00000000 385 #define CONFIG_SYS_PCI1_IO_PHYS 0xE2000000 386 #define CONFIG_SYS_PCI1_IO_SIZE 0x01000000 /* 16M */ 387 388 #ifdef CONFIG_MPC83XX_PCI2 389 #define CONFIG_SYS_PCI2_MEM_BASE \ 390 (CONFIG_SYS_PCI1_MMIO_BASE + CONFIG_SYS_PCI1_MMIO_SIZE) 391 #define CONFIG_SYS_PCI2_MEM_PHYS CONFIG_SYS_PCI2_MEM_BASE 392 #define CONFIG_SYS_PCI2_MEM_SIZE 0x10000000 /* 256M */ 393 #define CONFIG_SYS_PCI2_MMIO_BASE \ 394 (CONFIG_SYS_PCI2_MEM_BASE + CONFIG_SYS_PCI2_MEM_SIZE) 395 #define CONFIG_SYS_PCI2_MMIO_PHYS CONFIG_SYS_PCI2_MMIO_BASE 396 #define CONFIG_SYS_PCI2_MMIO_SIZE 0x10000000 /* 256M */ 397 #define CONFIG_SYS_PCI2_IO_BASE 0x00000000 398 #define CONFIG_SYS_PCI2_IO_PHYS \ 399 (CONFIG_SYS_PCI1_IO_PHYS + CONFIG_SYS_PCI1_IO_SIZE) 400 #define CONFIG_SYS_PCI2_IO_SIZE 0x01000000 /* 16M */ 401 #endif 402 403 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 404 405 #ifndef CONFIG_PCI_PNP 406 #define PCI_ENET0_IOADDR 0x00000000 407 #define PCI_ENET0_MEMADDR CONFIG_SYS_PCI2_MEM_BASE 408 #define PCI_IDSEL_NUMBER 0x0f /* IDSEL = AD15 */ 409 #endif 410 411 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 412 413 #endif 414 415 #define CONFIG_PCI_66M 416 #ifdef CONFIG_PCI_66M 417 #define CONFIG_83XX_CLKIN 66666666 /* in Hz */ 418 #else 419 #define CONFIG_83XX_CLKIN 33333333 /* in Hz */ 420 #endif 421 422 /* TSEC */ 423 424 #ifdef CONFIG_TSEC_ENET 425 426 #define CONFIG_MII 427 #define CONFIG_PHY_GIGE /* In case CONFIG_CMD_MII is specified */ 428 429 #define CONFIG_TSEC1 430 431 #ifdef CONFIG_TSEC1 432 #define CONFIG_HAS_ETH0 433 #define CONFIG_TSEC1_NAME "TSEC0" 434 #define CONFIG_SYS_TSEC1_OFFSET 0x24000 435 #define TSEC1_PHY_ADDR 0x1c /* VSC8201 uses address 0x1c */ 436 #define TSEC1_PHYIDX 0 437 #define TSEC1_FLAGS TSEC_GIGABIT 438 #endif 439 440 #ifdef CONFIG_TSEC2 441 #define CONFIG_HAS_ETH1 442 #define CONFIG_TSEC2_NAME "TSEC1" 443 #define CONFIG_SYS_TSEC2_OFFSET 0x25000 444 445 #define TSEC2_PHY_ADDR 4 446 #define TSEC2_PHYIDX 0 447 #define TSEC2_FLAGS TSEC_GIGABIT 448 #endif 449 450 #define CONFIG_ETHPRIME "Freescale TSEC" 451 452 #endif 453 454 /* 455 * Environment 456 */ 457 #define CONFIG_ENV_OVERWRITE 458 459 #ifndef CONFIG_SYS_RAMBOOT 460 #define CONFIG_ENV_IS_IN_FLASH 461 #define CONFIG_ENV_ADDR \ 462 (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) 463 #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K (one sector) for environment */ 464 #define CONFIG_ENV_SIZE 0x2000 465 #else 466 #define CONFIG_SYS_NO_FLASH /* Flash is not usable now */ 467 #undef CONFIG_FLASH_CFI_DRIVER 468 #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ 469 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) 470 #define CONFIG_ENV_SIZE 0x2000 471 #endif 472 473 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 474 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 475 476 /* 477 * BOOTP options 478 */ 479 #define CONFIG_BOOTP_BOOTFILESIZE 480 #define CONFIG_BOOTP_BOOTPATH 481 #define CONFIG_BOOTP_GATEWAY 482 #define CONFIG_BOOTP_HOSTNAME 483 484 /* 485 * Command line configuration. 486 */ 487 #define CONFIG_CMD_DATE 488 #define CONFIG_CMD_IRQ 489 #define CONFIG_CMD_SDRAM 490 491 #if defined(CONFIG_COMPACT_FLASH) || defined(CONFIG_SATA_SIL3114) \ 492 || defined(CONFIG_USB_STORAGE) 493 #define CONFIG_DOS_PARTITION 494 #define CONFIG_SUPPORT_VFAT 495 #endif 496 497 #ifdef CONFIG_COMPACT_FLASH 498 #define CONFIG_CMD_IDE 499 #endif 500 501 #ifdef CONFIG_SATA_SIL3114 502 #define CONFIG_CMD_SATA 503 #endif 504 505 #if defined(CONFIG_SATA_SIL3114) || defined(CONFIG_USB_STORAGE) 506 #endif 507 508 #ifdef CONFIG_PCI 509 #define CONFIG_CMD_PCI 510 #endif 511 512 /* Watchdog */ 513 #undef CONFIG_WATCHDOG /* watchdog disabled */ 514 515 /* 516 * Miscellaneous configurable options 517 */ 518 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 519 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 520 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 521 522 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 523 #define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */ 524 525 #if defined(CONFIG_CMD_KGDB) 526 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 527 #else 528 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 529 #endif 530 531 /* Print Buffer Size */ 532 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 533 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 534 /* Boot Argument Buffer Size */ 535 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 536 537 /* 538 * For booting Linux, the board info and command line data 539 * have to be in the first 256 MB of memory, since this is 540 * the maximum mapped by the Linux kernel during initialization. 541 */ 542 /* Initial Memory map for Linux*/ 543 #define CONFIG_SYS_BOOTMAPSZ (256 << 20) 544 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 545 546 #define CONFIG_SYS_HRCW_LOW (\ 547 HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ 548 HRCWL_DDR_TO_SCB_CLK_1X1 |\ 549 HRCWL_CSB_TO_CLKIN_4X1 |\ 550 HRCWL_VCO_1X2 |\ 551 HRCWL_CORE_TO_CSB_2X1) 552 553 #ifdef CONFIG_SYS_LOWBOOT 554 #define CONFIG_SYS_HRCW_HIGH (\ 555 HRCWH_PCI_HOST |\ 556 HRCWH_32_BIT_PCI |\ 557 HRCWH_PCI1_ARBITER_ENABLE |\ 558 HRCWH_PCI2_ARBITER_ENABLE |\ 559 HRCWH_CORE_ENABLE |\ 560 HRCWH_FROM_0X00000100 |\ 561 HRCWH_BOOTSEQ_DISABLE |\ 562 HRCWH_SW_WATCHDOG_DISABLE |\ 563 HRCWH_ROM_LOC_LOCAL_16BIT |\ 564 HRCWH_TSEC1M_IN_GMII |\ 565 HRCWH_TSEC2M_IN_GMII) 566 #else 567 #define CONFIG_SYS_HRCW_HIGH (\ 568 HRCWH_PCI_HOST |\ 569 HRCWH_32_BIT_PCI |\ 570 HRCWH_PCI1_ARBITER_ENABLE |\ 571 HRCWH_PCI2_ARBITER_ENABLE |\ 572 HRCWH_CORE_ENABLE |\ 573 HRCWH_FROM_0XFFF00100 |\ 574 HRCWH_BOOTSEQ_DISABLE |\ 575 HRCWH_SW_WATCHDOG_DISABLE |\ 576 HRCWH_ROM_LOC_LOCAL_16BIT |\ 577 HRCWH_TSEC1M_IN_GMII |\ 578 HRCWH_TSEC2M_IN_GMII) 579 #endif 580 581 /* 582 * System performance 583 */ 584 #define CONFIG_SYS_ACR_PIPE_DEP 3 /* Arbiter pipeline depth (0-3) */ 585 #define CONFIG_SYS_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */ 586 #define CONFIG_SYS_SPCR_TSEC1EP 3 /* TSEC1 emergency priority (0-3) */ 587 #define CONFIG_SYS_SPCR_TSEC2EP 3 /* TSEC2 emergency priority (0-3) */ 588 #define CONFIG_SYS_SCCR_TSEC1CM 1 /* TSEC1 clock mode (0-3) */ 589 #define CONFIG_SYS_SCCR_TSEC2CM 1 /* TSEC2 & I2C0 clock mode (0-3) */ 590 #define CONFIG_SYS_SCCR_USBMPHCM 3 /* USB MPH controller's clock */ 591 #define CONFIG_SYS_SCCR_USBDRCM 0 /* USB DR controller's clock */ 592 593 /* 594 * System IO Config 595 */ 596 /* Needed for gigabit to work on TSEC 1 */ 597 #define CONFIG_SYS_SICRH SICRH_TSOBI1 598 /* USB DR as device + USB MPH as host */ 599 #define CONFIG_SYS_SICRL (SICRL_LDP_A | SICRL_USB1) 600 601 #define CONFIG_SYS_HID0_INIT 0x00000000 602 #define CONFIG_SYS_HID0_FINAL HID0_ENABLE_INSTRUCTION_CACHE 603 604 #define CONFIG_SYS_HID2 HID2_HBE 605 #define CONFIG_HIGH_BATS 1 /* High BATs supported */ 606 607 /* DDR */ 608 #define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE \ 609 | BATL_PP_RW \ 610 | BATL_MEMCOHERENCE) 611 #define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE \ 612 | BATU_BL_256M \ 613 | BATU_VS \ 614 | BATU_VP) 615 616 /* PCI */ 617 #ifdef CONFIG_PCI 618 #define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCI1_MEM_BASE \ 619 | BATL_PP_RW \ 620 | BATL_MEMCOHERENCE) 621 #define CONFIG_SYS_IBAT1U (CONFIG_SYS_PCI1_MEM_BASE \ 622 | BATU_BL_256M \ 623 | BATU_VS \ 624 | BATU_VP) 625 #define CONFIG_SYS_IBAT2L (CONFIG_SYS_PCI1_MMIO_BASE \ 626 | BATL_PP_RW \ 627 | BATL_CACHEINHIBIT \ 628 | BATL_GUARDEDSTORAGE) 629 #define CONFIG_SYS_IBAT2U (CONFIG_SYS_PCI1_MMIO_BASE \ 630 | BATU_BL_256M \ 631 | BATU_VS \ 632 | BATU_VP) 633 #else 634 #define CONFIG_SYS_IBAT1L 0 635 #define CONFIG_SYS_IBAT1U 0 636 #define CONFIG_SYS_IBAT2L 0 637 #define CONFIG_SYS_IBAT2U 0 638 #endif 639 640 #ifdef CONFIG_MPC83XX_PCI2 641 #define CONFIG_SYS_IBAT3L (CONFIG_SYS_PCI2_MEM_BASE \ 642 | BATL_PP_RW \ 643 | BATL_MEMCOHERENCE) 644 #define CONFIG_SYS_IBAT3U (CONFIG_SYS_PCI2_MEM_BASE \ 645 | BATU_BL_256M \ 646 | BATU_VS \ 647 | BATU_VP) 648 #define CONFIG_SYS_IBAT4L (CONFIG_SYS_PCI2_MMIO_BASE \ 649 | BATL_PP_RW \ 650 | BATL_CACHEINHIBIT \ 651 | BATL_GUARDEDSTORAGE) 652 #define CONFIG_SYS_IBAT4U (CONFIG_SYS_PCI2_MMIO_BASE \ 653 | BATU_BL_256M \ 654 | BATU_VS \ 655 | BATU_VP) 656 #else 657 #define CONFIG_SYS_IBAT3L 0 658 #define CONFIG_SYS_IBAT3U 0 659 #define CONFIG_SYS_IBAT4L 0 660 #define CONFIG_SYS_IBAT4U 0 661 #endif 662 663 /* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */ 664 #define CONFIG_SYS_IBAT5L (CONFIG_SYS_IMMR \ 665 | BATL_PP_RW \ 666 | BATL_CACHEINHIBIT \ 667 | BATL_GUARDEDSTORAGE) 668 #define CONFIG_SYS_IBAT5U (CONFIG_SYS_IMMR \ 669 | BATU_BL_256M \ 670 | BATU_VS \ 671 | BATU_VP) 672 673 /* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */ 674 #define CONFIG_SYS_IBAT6L (0xF0000000 \ 675 | BATL_PP_RW \ 676 | BATL_MEMCOHERENCE \ 677 | BATL_GUARDEDSTORAGE) 678 #define CONFIG_SYS_IBAT6U (0xF0000000 \ 679 | BATU_BL_256M \ 680 | BATU_VS \ 681 | BATU_VP) 682 683 #define CONFIG_SYS_IBAT7L 0 684 #define CONFIG_SYS_IBAT7U 0 685 686 #define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L 687 #define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U 688 #define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L 689 #define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U 690 #define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L 691 #define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U 692 #define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L 693 #define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U 694 #define CONFIG_SYS_DBAT4L CONFIG_SYS_IBAT4L 695 #define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U 696 #define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L 697 #define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U 698 #define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L 699 #define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U 700 #define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L 701 #define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U 702 703 #if defined(CONFIG_CMD_KGDB) 704 #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ 705 #endif 706 707 /* 708 * Environment Configuration 709 */ 710 #define CONFIG_ENV_OVERWRITE 711 712 #define CONFIG_NETDEV "eth0" 713 714 #ifdef CONFIG_MPC8349ITX 715 #define CONFIG_HOSTNAME "mpc8349emitx" 716 #else 717 #define CONFIG_HOSTNAME "mpc8349emitxgp" 718 #endif 719 720 /* Default path and filenames */ 721 #define CONFIG_ROOTPATH "/nfsroot/rootfs" 722 #define CONFIG_BOOTFILE "uImage" 723 /* U-Boot image on TFTP server */ 724 #define CONFIG_UBOOTPATH "u-boot.bin" 725 726 #ifdef CONFIG_MPC8349ITX 727 #define CONFIG_FDTFILE "mpc8349emitx.dtb" 728 #else 729 #define CONFIG_FDTFILE "mpc8349emitxgp.dtb" 730 #endif 731 732 733 #define CONFIG_BOOTARGS \ 734 "root=/dev/nfs rw" \ 735 " nfsroot=" __stringify(CONFIG_SERVERIP) ":" CONFIG_ROOTPATH \ 736 " ip=" __stringify(CONFIG_IPADDR) ":" \ 737 __stringify(CONFIG_SERVERIP) ":" \ 738 __stringify(CONFIG_GATEWAYIP) ":" \ 739 __stringify(CONFIG_NETMASK) ":" \ 740 CONFIG_HOSTNAME ":" CONFIG_NETDEV ":off" \ 741 " console=" __stringify(CONSOLE) "," __stringify(CONFIG_BAUDRATE) 742 743 #define CONFIG_EXTRA_ENV_SETTINGS \ 744 "console=" __stringify(CONSOLE) "\0" \ 745 "netdev=" CONFIG_NETDEV "\0" \ 746 "uboot=" CONFIG_UBOOTPATH "\0" \ 747 "tftpflash=tftpboot $loadaddr $uboot; " \ 748 "protect off " __stringify(CONFIG_SYS_TEXT_BASE) \ 749 " +$filesize; " \ 750 "erase " __stringify(CONFIG_SYS_TEXT_BASE) \ 751 " +$filesize; " \ 752 "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \ 753 " $filesize; " \ 754 "protect on " __stringify(CONFIG_SYS_TEXT_BASE) \ 755 " +$filesize; " \ 756 "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \ 757 " $filesize\0" \ 758 "fdtaddr=780000\0" \ 759 "fdtfile=" CONFIG_FDTFILE "\0" 760 761 #define CONFIG_NFSBOOTCOMMAND \ 762 "setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath" \ 763 " ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off "\ 764 " console=$console,$baudrate $othbootargs; " \ 765 "tftp $loadaddr $bootfile;" \ 766 "tftp $fdtaddr $fdtfile;" \ 767 "bootm $loadaddr - $fdtaddr" 768 769 #define CONFIG_RAMBOOTCOMMAND \ 770 "setenv bootargs root=/dev/ram rw" \ 771 " console=$console,$baudrate $othbootargs; " \ 772 "tftp $ramdiskaddr $ramdiskfile;" \ 773 "tftp $loadaddr $bootfile;" \ 774 "tftp $fdtaddr $fdtfile;" \ 775 "bootm $loadaddr $ramdiskaddr $fdtaddr" 776 777 #endif 778