1 /* 2 * (C) Copyright 2006 3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. 4 * 5 * See file CREDITS for list of people who contributed to this 6 * project. 7 * 8 * This program is free software; you can redistribute it and/or 9 * modify it under the terms of the GNU General Public License as 10 * published by the Free Software Foundation; either version 2 of 11 * the License, or (at your option) any later version. 12 * 13 * This program is distributed in the hope that it will be useful, 14 * but WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 * GNU General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software 20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 21 * MA 02111-1307 USA 22 */ 23 24 /* 25 * mpc8349emds board configuration file 26 * 27 */ 28 29 #ifndef __CONFIG_H 30 #define __CONFIG_H 31 32 /* 33 * High Level Configuration Options 34 */ 35 #define CONFIG_E300 1 /* E300 Family */ 36 #define CONFIG_MPC83xx 1 /* MPC83xx family */ 37 #define CONFIG_MPC834x 1 /* MPC834x family */ 38 #define CONFIG_MPC8349 1 /* MPC8349 specific */ 39 #define CONFIG_MPC8349EMDS 1 /* MPC8349EMDS board specific */ 40 41 #undef CONFIG_PCI 42 #undef CONFIG_MPC83XX_PCI2 /* support for 2nd PCI controller */ 43 44 #define PCI_66M 45 #ifdef PCI_66M 46 #define CONFIG_83XX_CLKIN 66000000 /* in Hz */ 47 #else 48 #define CONFIG_83XX_CLKIN 33000000 /* in Hz */ 49 #endif 50 51 #ifdef CONFIG_PCISLAVE 52 #define CONFIG_PCI 53 #define CONFIG_83XX_PCICLK 66666666 /* in Hz */ 54 #endif /* CONFIG_PCISLAVE */ 55 56 #ifndef CONFIG_SYS_CLK_FREQ 57 #ifdef PCI_66M 58 #define CONFIG_SYS_CLK_FREQ 66000000 59 #define HRCWL_CSB_TO_CLKIN HRCWL_CSB_TO_CLKIN_4X1 60 #else 61 #define CONFIG_SYS_CLK_FREQ 33000000 62 #define HRCWL_CSB_TO_CLKIN HRCWL_CSB_TO_CLKIN_8X1 63 #endif 64 #endif 65 66 #define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */ 67 68 #define CONFIG_SYS_IMMR 0xE0000000 69 70 #undef CONFIG_SYS_DRAM_TEST /* memory test, takes time */ 71 #define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest region */ 72 #define CONFIG_SYS_MEMTEST_END 0x00100000 73 74 /* 75 * DDR Setup 76 */ 77 #define CONFIG_DDR_ECC /* support DDR ECC function */ 78 #define CONFIG_DDR_ECC_CMD /* use DDR ECC user commands */ 79 #define CONFIG_SPD_EEPROM /* use SPD EEPROM for DDR setup*/ 80 81 /* 82 * 32-bit data path mode. 83 * 84 * Please note that using this mode for devices with the real density of 64-bit 85 * effectively reduces the amount of available memory due to the effect of 86 * wrapping around while translating address to row/columns, for example in the 87 * 256MB module the upper 128MB get aliased with contents of the lower 88 * 128MB); normally this define should be used for devices with real 32-bit 89 * data path. 90 */ 91 #undef CONFIG_DDR_32BIT 92 93 #define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory*/ 94 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE 95 #define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE 96 #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN | \ 97 DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05) 98 #undef CONFIG_DDR_2T_TIMING 99 100 /* 101 * DDRCDR - DDR Control Driver Register 102 */ 103 #define CONFIG_SYS_DDRCDR_VALUE 0x80080001 104 105 #if defined(CONFIG_SPD_EEPROM) 106 /* 107 * Determine DDR configuration from I2C interface. 108 */ 109 #define SPD_EEPROM_ADDRESS 0x51 /* DDR DIMM */ 110 #else 111 /* 112 * Manually set up DDR parameters 113 */ 114 #define CONFIG_SYS_DDR_SIZE 256 /* MB */ 115 #if defined(CONFIG_DDR_II) 116 #define CONFIG_SYS_DDRCDR 0x80080001 117 #define CONFIG_SYS_DDR_CS2_BNDS 0x0000000f 118 #define CONFIG_SYS_DDR_CS2_CONFIG 0x80330102 119 #define CONFIG_SYS_DDR_TIMING_0 0x00220802 120 #define CONFIG_SYS_DDR_TIMING_1 0x38357322 121 #define CONFIG_SYS_DDR_TIMING_2 0x2f9048c8 122 #define CONFIG_SYS_DDR_TIMING_3 0x00000000 123 #define CONFIG_SYS_DDR_CLK_CNTL 0x02000000 124 #define CONFIG_SYS_DDR_MODE 0x47d00432 125 #define CONFIG_SYS_DDR_MODE2 0x8000c000 126 #define CONFIG_SYS_DDR_INTERVAL 0x03cf0080 127 #define CONFIG_SYS_DDR_SDRAM_CFG 0x43000000 128 #define CONFIG_SYS_DDR_SDRAM_CFG2 0x00401000 129 #else 130 #define CONFIG_SYS_DDR_CONFIG (CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10) 131 #define CONFIG_SYS_DDR_TIMING_1 0x36332321 132 #define CONFIG_SYS_DDR_TIMING_2 0x00000800 /* P9-45,may need tuning */ 133 #define CONFIG_SYS_DDR_CONTROL 0xc2000000 /* unbuffered,no DYN_PWR */ 134 #define CONFIG_SYS_DDR_INTERVAL 0x04060100 /* autocharge,no open page */ 135 136 #if defined(CONFIG_DDR_32BIT) 137 /* set burst length to 8 for 32-bit data path */ 138 #define CONFIG_SYS_DDR_MODE 0x00000023 /* DLL,normal,seq,4/2.5, 8 burst len */ 139 #else 140 /* the default burst length is 4 - for 64-bit data path */ 141 #define CONFIG_SYS_DDR_MODE 0x00000022 /* DLL,normal,seq,4/2.5, 4 burst len */ 142 #endif 143 #endif 144 #endif 145 146 /* 147 * SDRAM on the Local Bus 148 */ 149 #define CONFIG_SYS_LBC_SDRAM_BASE 0xF0000000 /* Localbus SDRAM */ 150 #define CONFIG_SYS_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */ 151 152 /* 153 * FLASH on the Local Bus 154 */ 155 #define CONFIG_SYS_FLASH_CFI /* use the Common Flash Interface */ 156 #define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */ 157 #define CONFIG_SYS_FLASH_BASE 0xFE000000 /* start of FLASH */ 158 #define CONFIG_SYS_FLASH_SIZE 32 /* max flash size in MB */ 159 #define CONFIG_SYS_FLASH_PROTECTION 1 /* Use h/w Flash protection. */ 160 /* #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE */ 161 162 #define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | /* flash Base address */ \ 163 (2 << BR_PS_SHIFT) | /* 16 bit port size */ \ 164 BR_V) /* valid */ 165 #define CONFIG_SYS_OR0_PRELIM ((~(CONFIG_SYS_FLASH_SIZE - 1) << 20) | OR_UPM_XAM | \ 166 OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS | OR_GPCM_SCY_15 | \ 167 OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD) 168 #define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE /* window base at flash base */ 169 #define CONFIG_SYS_LBLAWAR0_PRELIM 0x80000018 /* 32 MB window size */ 170 171 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ 172 #define CONFIG_SYS_MAX_FLASH_SECT 256 /* max sectors per device */ 173 174 #undef CONFIG_SYS_FLASH_CHECKSUM 175 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 176 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 177 178 #define CONFIG_SYS_MID_FLASH_JUMP 0x7F000000 179 #define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */ 180 181 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) 182 #define CONFIG_SYS_RAMBOOT 183 #else 184 #undef CONFIG_SYS_RAMBOOT 185 #endif 186 187 /* 188 * BCSR register on local bus 32KB, 8-bit wide for MDS config reg 189 */ 190 #define CONFIG_SYS_BCSR 0xE2400000 191 #define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_BCSR /* Access window base at BCSR base */ 192 #define CONFIG_SYS_LBLAWAR1_PRELIM 0x8000000E /* Access window size 32K */ 193 #define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_BCSR|0x00000801) /* Port-size=8bit, MSEL=GPCM */ 194 #define CONFIG_SYS_OR1_PRELIM 0xFFFFE8F0 /* length 32K */ 195 196 #define CONFIG_SYS_INIT_RAM_LOCK 1 197 #define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */ 198 #define CONFIG_SYS_INIT_RAM_END 0x1000 /* End of used area in RAM*/ 199 200 #define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */ 201 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) 202 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 203 204 #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ 205 #define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ 206 207 /* 208 * Local Bus LCRR and LBCR regs 209 * LCRR: DLL bypass, Clock divider is 4 210 * External Local Bus rate is 211 * CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV 212 */ 213 #define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_CLKDIV_4) 214 #define CONFIG_SYS_LBC_LBCR 0x00000000 215 216 /* 217 * The MPC834xEA MDS for 834xE rev3.1 may not be assembled SDRAM memory. 218 * if board has SRDAM on local bus, you can define CONFIG_SYS_LB_SDRAM 219 */ 220 #undef CONFIG_SYS_LB_SDRAM 221 222 #ifdef CONFIG_SYS_LB_SDRAM 223 /* Local bus BR2, OR2 definition for SDRAM if soldered on the MDS board */ 224 /* 225 * Base Register 2 and Option Register 2 configure SDRAM. 226 * The SDRAM base address, CONFIG_SYS_LBC_SDRAM_BASE, is 0xf0000000. 227 * 228 * For BR2, need: 229 * Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0 230 * port-size = 32-bits = BR2[19:20] = 11 231 * no parity checking = BR2[21:22] = 00 232 * SDRAM for MSEL = BR2[24:26] = 011 233 * Valid = BR[31] = 1 234 * 235 * 0 4 8 12 16 20 24 28 236 * 1111 0000 0000 0000 0001 1000 0110 0001 = F0001861 237 * 238 * FIXME: CONFIG_SYS_LBC_SDRAM_BASE should be masked and OR'ed into 239 * FIXME: the top 17 bits of BR2. 240 */ 241 242 #define CONFIG_SYS_BR2_PRELIM 0xF0001861 /* Port-size=32bit, MSEL=SDRAM */ 243 #define CONFIG_SYS_LBLAWBAR2_PRELIM 0xF0000000 244 #define CONFIG_SYS_LBLAWAR2_PRELIM 0x80000019 /* 64M */ 245 246 /* 247 * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64. 248 * 249 * For OR2, need: 250 * 64MB mask for AM, OR2[0:7] = 1111 1100 251 * XAM, OR2[17:18] = 11 252 * 9 columns OR2[19-21] = 010 253 * 13 rows OR2[23-25] = 100 254 * EAD set for extra time OR[31] = 1 255 * 256 * 0 4 8 12 16 20 24 28 257 * 1111 1100 0000 0000 0110 1001 0000 0001 = FC006901 258 */ 259 260 #define CONFIG_SYS_OR2_PRELIM 0xFC006901 261 262 #define CONFIG_SYS_LBC_LSRT 0x32000000 /* LB sdram refresh timer, about 6us */ 263 #define CONFIG_SYS_LBC_MRTPR 0x20000000 /* LB refresh timer prescal, 266MHz/32 */ 264 265 #define CONFIG_SYS_LBC_LSDMR_COMMON ( LSDMR_RFEN \ 266 | LSDMR_BSMA1516 \ 267 | LSDMR_RFCR8 \ 268 | LSDMR_PRETOACT6 \ 269 | LSDMR_ACTTORW3 \ 270 | LSDMR_BL8 \ 271 | LSDMR_WRC3 \ 272 | LSDMR_CL3 \ 273 ) 274 275 /* 276 * SDRAM Controller configuration sequence. 277 */ 278 #define CONFIG_SYS_LBC_LSDMR_1 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_PCHALL) 279 #define CONFIG_SYS_LBC_LSDMR_2 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_ARFRSH) 280 #define CONFIG_SYS_LBC_LSDMR_3 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_ARFRSH) 281 #define CONFIG_SYS_LBC_LSDMR_4 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_MRW) 282 #define CONFIG_SYS_LBC_LSDMR_5 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_NORMAL) 283 #endif 284 285 /* 286 * Serial Port 287 */ 288 #define CONFIG_CONS_INDEX 1 289 #undef CONFIG_SERIAL_SOFTWARE_FIFO 290 #define CONFIG_SYS_NS16550 291 #define CONFIG_SYS_NS16550_SERIAL 292 #define CONFIG_SYS_NS16550_REG_SIZE 1 293 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 294 295 #define CONFIG_SYS_BAUDRATE_TABLE \ 296 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} 297 298 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500) 299 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600) 300 301 #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ 302 /* Use the HUSH parser */ 303 #define CONFIG_SYS_HUSH_PARSER 304 #ifdef CONFIG_SYS_HUSH_PARSER 305 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 306 #endif 307 308 /* pass open firmware flat tree */ 309 #define CONFIG_OF_LIBFDT 1 310 #define CONFIG_OF_BOARD_SETUP 1 311 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 312 313 /* I2C */ 314 #define CONFIG_HARD_I2C /* I2C with hardware support*/ 315 #undef CONFIG_SOFT_I2C /* I2C bit-banged */ 316 #define CONFIG_FSL_I2C 317 #define CONFIG_I2C_MULTI_BUS 318 #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ 319 #define CONFIG_SYS_I2C_SLAVE 0x7F 320 #define CONFIG_SYS_I2C_NOPROBES {{0,0x69}} /* Don't probe these addrs */ 321 #define CONFIG_SYS_I2C_OFFSET 0x3000 322 #define CONFIG_SYS_I2C2_OFFSET 0x3100 323 324 /* SPI */ 325 #define CONFIG_MPC8XXX_SPI 326 #undef CONFIG_SOFT_SPI /* SPI bit-banged */ 327 328 /* GPIOs. Used as SPI chip selects */ 329 #define CONFIG_SYS_GPIO1_PRELIM 330 #define CONFIG_SYS_GPIO1_DIR 0xC0000000 /* SPI CS on 0, LED on 1 */ 331 #define CONFIG_SYS_GPIO1_DAT 0xC0000000 /* Both are active LOW */ 332 333 /* TSEC */ 334 #define CONFIG_SYS_TSEC1_OFFSET 0x24000 335 #define CONFIG_SYS_TSEC1 (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET) 336 #define CONFIG_SYS_TSEC2_OFFSET 0x25000 337 #define CONFIG_SYS_TSEC2 (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC2_OFFSET) 338 339 /* USB */ 340 #define CONFIG_SYS_USE_MPC834XSYS_USB_PHY 1 /* Use SYS board PHY */ 341 342 /* 343 * General PCI 344 * Addresses are mapped 1-1. 345 */ 346 #define CONFIG_SYS_PCI1_MEM_BASE 0x80000000 347 #define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE 348 #define CONFIG_SYS_PCI1_MEM_SIZE 0x10000000 /* 256M */ 349 #define CONFIG_SYS_PCI1_MMIO_BASE 0x90000000 350 #define CONFIG_SYS_PCI1_MMIO_PHYS CONFIG_SYS_PCI1_MMIO_BASE 351 #define CONFIG_SYS_PCI1_MMIO_SIZE 0x10000000 /* 256M */ 352 #define CONFIG_SYS_PCI1_IO_BASE 0x00000000 353 #define CONFIG_SYS_PCI1_IO_PHYS 0xE2000000 354 #define CONFIG_SYS_PCI1_IO_SIZE 0x00100000 /* 1M */ 355 356 #define CONFIG_SYS_PCI2_MEM_BASE 0xA0000000 357 #define CONFIG_SYS_PCI2_MEM_PHYS CONFIG_SYS_PCI2_MEM_BASE 358 #define CONFIG_SYS_PCI2_MEM_SIZE 0x10000000 /* 256M */ 359 #define CONFIG_SYS_PCI2_MMIO_BASE 0xB0000000 360 #define CONFIG_SYS_PCI2_MMIO_PHYS CONFIG_SYS_PCI2_MMIO_BASE 361 #define CONFIG_SYS_PCI2_MMIO_SIZE 0x10000000 /* 256M */ 362 #define CONFIG_SYS_PCI2_IO_BASE 0x00000000 363 #define CONFIG_SYS_PCI2_IO_PHYS 0xE2100000 364 #define CONFIG_SYS_PCI2_IO_SIZE 0x00100000 /* 1M */ 365 366 #if defined(CONFIG_PCI) 367 368 #define PCI_ONE_PCI1 369 #if defined(PCI_64BIT) 370 #undef PCI_ALL_PCI1 371 #undef PCI_TWO_PCI1 372 #undef PCI_ONE_PCI1 373 #endif 374 375 #define CONFIG_NET_MULTI 376 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 377 #define CONFIG_83XX_GENERIC_PCI 378 #define CONFIG_83XX_PCI_STREAMING 379 380 #undef CONFIG_EEPRO100 381 #undef CONFIG_TULIP 382 383 #if !defined(CONFIG_PCI_PNP) 384 #define PCI_ENET0_IOADDR 0xFIXME 385 #define PCI_ENET0_MEMADDR 0xFIXME 386 #define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */ 387 #endif 388 389 #undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 390 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */ 391 392 #endif /* CONFIG_PCI */ 393 394 /* 395 * TSEC configuration 396 */ 397 #define CONFIG_TSEC_ENET /* TSEC ethernet support */ 398 399 #if defined(CONFIG_TSEC_ENET) 400 #ifndef CONFIG_NET_MULTI 401 #define CONFIG_NET_MULTI 1 402 #endif 403 404 #define CONFIG_GMII 1 /* MII PHY management */ 405 #define CONFIG_TSEC1 1 406 #define CONFIG_TSEC1_NAME "TSEC0" 407 #define CONFIG_TSEC2 1 408 #define CONFIG_TSEC2_NAME "TSEC1" 409 #define TSEC1_PHY_ADDR 0 410 #define TSEC2_PHY_ADDR 1 411 #define TSEC1_PHYIDX 0 412 #define TSEC2_PHYIDX 0 413 #define TSEC1_FLAGS TSEC_GIGABIT 414 #define TSEC2_FLAGS TSEC_GIGABIT 415 416 /* Options are: TSEC[0-1] */ 417 #define CONFIG_ETHPRIME "TSEC0" 418 419 #endif /* CONFIG_TSEC_ENET */ 420 421 /* 422 * Configure on-board RTC 423 */ 424 #define CONFIG_RTC_DS1374 /* use ds1374 rtc via i2c */ 425 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 /* at address 0x68 */ 426 427 /* 428 * Environment 429 */ 430 #ifndef CONFIG_SYS_RAMBOOT 431 #define CONFIG_ENV_IS_IN_FLASH 1 432 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) 433 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */ 434 #define CONFIG_ENV_SIZE 0x2000 435 436 /* Address and size of Redundant Environment Sector */ 437 #define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) 438 #define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) 439 440 #else 441 #define CONFIG_SYS_NO_FLASH 1 /* Flash is not usable now */ 442 #define CONFIG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ 443 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) 444 #define CONFIG_ENV_SIZE 0x2000 445 #endif 446 447 #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ 448 #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ 449 450 451 /* 452 * BOOTP options 453 */ 454 #define CONFIG_BOOTP_BOOTFILESIZE 455 #define CONFIG_BOOTP_BOOTPATH 456 #define CONFIG_BOOTP_GATEWAY 457 #define CONFIG_BOOTP_HOSTNAME 458 459 460 /* 461 * Command line configuration. 462 */ 463 #include <config_cmd_default.h> 464 465 #define CONFIG_CMD_PING 466 #define CONFIG_CMD_I2C 467 #define CONFIG_CMD_DATE 468 #define CONFIG_CMD_MII 469 470 #if defined(CONFIG_PCI) 471 #define CONFIG_CMD_PCI 472 #endif 473 474 #if defined(CONFIG_SYS_RAMBOOT) 475 #undef CONFIG_CMD_SAVEENV 476 #undef CONFIG_CMD_LOADS 477 #endif 478 479 480 #undef CONFIG_WATCHDOG /* watchdog disabled */ 481 482 /* 483 * Miscellaneous configurable options 484 */ 485 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 486 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 487 #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ 488 489 #if defined(CONFIG_CMD_KGDB) 490 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 491 #else 492 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 493 #endif 494 495 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ 496 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 497 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 498 #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ 499 500 /* 501 * For booting Linux, the board info and command line data 502 * have to be in the first 8 MB of memory, since this is 503 * the maximum mapped by the Linux kernel during initialization. 504 */ 505 #define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ 506 507 #define CONFIG_SYS_RCWH_PCIHOST 0x80000000 /* PCIHOST */ 508 509 #if 1 /*528/264*/ 510 #define CONFIG_SYS_HRCW_LOW (\ 511 HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ 512 HRCWL_DDR_TO_SCB_CLK_1X1 |\ 513 HRCWL_CSB_TO_CLKIN |\ 514 HRCWL_VCO_1X2 |\ 515 HRCWL_CORE_TO_CSB_2X1) 516 #elif 0 /*396/132*/ 517 #define CONFIG_SYS_HRCW_LOW (\ 518 HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ 519 HRCWL_DDR_TO_SCB_CLK_1X1 |\ 520 HRCWL_CSB_TO_CLKIN |\ 521 HRCWL_VCO_1X4 |\ 522 HRCWL_CORE_TO_CSB_3X1) 523 #elif 0 /*264/132*/ 524 #define CONFIG_SYS_HRCW_LOW (\ 525 HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ 526 HRCWL_DDR_TO_SCB_CLK_1X1 |\ 527 HRCWL_CSB_TO_CLKIN |\ 528 HRCWL_VCO_1X4 |\ 529 HRCWL_CORE_TO_CSB_2X1) 530 #elif 0 /*132/132*/ 531 #define CONFIG_SYS_HRCW_LOW (\ 532 HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ 533 HRCWL_DDR_TO_SCB_CLK_1X1 |\ 534 HRCWL_CSB_TO_CLKIN |\ 535 HRCWL_VCO_1X4 |\ 536 HRCWL_CORE_TO_CSB_1X1) 537 #elif 0 /*264/264 */ 538 #define CONFIG_SYS_HRCW_LOW (\ 539 HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ 540 HRCWL_DDR_TO_SCB_CLK_1X1 |\ 541 HRCWL_CSB_TO_CLKIN |\ 542 HRCWL_VCO_1X4 |\ 543 HRCWL_CORE_TO_CSB_1X1) 544 #endif 545 546 #ifdef CONFIG_PCISLAVE 547 #define CONFIG_SYS_HRCW_HIGH (\ 548 HRCWH_PCI_AGENT |\ 549 HRCWH_64_BIT_PCI |\ 550 HRCWH_PCI1_ARBITER_DISABLE |\ 551 HRCWH_PCI2_ARBITER_DISABLE |\ 552 HRCWH_CORE_ENABLE |\ 553 HRCWH_FROM_0X00000100 |\ 554 HRCWH_BOOTSEQ_DISABLE |\ 555 HRCWH_SW_WATCHDOG_DISABLE |\ 556 HRCWH_ROM_LOC_LOCAL_16BIT |\ 557 HRCWH_TSEC1M_IN_GMII |\ 558 HRCWH_TSEC2M_IN_GMII ) 559 #else 560 #if defined(PCI_64BIT) 561 #define CONFIG_SYS_HRCW_HIGH (\ 562 HRCWH_PCI_HOST |\ 563 HRCWH_64_BIT_PCI |\ 564 HRCWH_PCI1_ARBITER_ENABLE |\ 565 HRCWH_PCI2_ARBITER_DISABLE |\ 566 HRCWH_CORE_ENABLE |\ 567 HRCWH_FROM_0X00000100 |\ 568 HRCWH_BOOTSEQ_DISABLE |\ 569 HRCWH_SW_WATCHDOG_DISABLE |\ 570 HRCWH_ROM_LOC_LOCAL_16BIT |\ 571 HRCWH_TSEC1M_IN_GMII |\ 572 HRCWH_TSEC2M_IN_GMII ) 573 #else 574 #define CONFIG_SYS_HRCW_HIGH (\ 575 HRCWH_PCI_HOST |\ 576 HRCWH_32_BIT_PCI |\ 577 HRCWH_PCI1_ARBITER_ENABLE |\ 578 HRCWH_PCI2_ARBITER_ENABLE |\ 579 HRCWH_CORE_ENABLE |\ 580 HRCWH_FROM_0X00000100 |\ 581 HRCWH_BOOTSEQ_DISABLE |\ 582 HRCWH_SW_WATCHDOG_DISABLE |\ 583 HRCWH_ROM_LOC_LOCAL_16BIT |\ 584 HRCWH_TSEC1M_IN_GMII |\ 585 HRCWH_TSEC2M_IN_GMII ) 586 #endif /* PCI_64BIT */ 587 #endif /* CONFIG_PCISLAVE */ 588 589 /* 590 * System performance 591 */ 592 #define CONFIG_SYS_ACR_PIPE_DEP 3 /* Arbiter pipeline depth (0-3) */ 593 #define CONFIG_SYS_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */ 594 #define CONFIG_SYS_SPCR_TSEC1EP 3 /* TSEC1 emergency priority (0-3) */ 595 #define CONFIG_SYS_SPCR_TSEC2EP 3 /* TSEC2 emergency priority (0-3) */ 596 #define CONFIG_SYS_SCCR_TSEC1CM 1 /* TSEC1 clock mode (0-3) */ 597 #define CONFIG_SYS_SCCR_TSEC2CM 1 /* TSEC2 & I2C0 clock mode (0-3) */ 598 599 /* System IO Config */ 600 #define CONFIG_SYS_SICRH 0 601 #define CONFIG_SYS_SICRL SICRL_LDP_A 602 603 #define CONFIG_SYS_HID0_INIT 0x000000000 604 #define CONFIG_SYS_HID0_FINAL HID0_ENABLE_MACHINE_CHECK 605 606 /* #define CONFIG_SYS_HID0_FINAL (\ 607 HID0_ENABLE_INSTRUCTION_CACHE |\ 608 HID0_ENABLE_M_BIT |\ 609 HID0_ENABLE_ADDRESS_BROADCAST ) */ 610 611 612 #define CONFIG_SYS_HID2 HID2_HBE 613 #define CONFIG_HIGH_BATS 1 /* High BATs supported */ 614 615 /* DDR @ 0x00000000 */ 616 #define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) 617 #define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) 618 619 /* PCI @ 0x80000000 */ 620 #ifdef CONFIG_PCI 621 #define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCI1_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) 622 #define CONFIG_SYS_IBAT1U (CONFIG_SYS_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) 623 #define CONFIG_SYS_IBAT2L (CONFIG_SYS_PCI1_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) 624 #define CONFIG_SYS_IBAT2U (CONFIG_SYS_PCI1_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP) 625 #else 626 #define CONFIG_SYS_IBAT1L (0) 627 #define CONFIG_SYS_IBAT1U (0) 628 #define CONFIG_SYS_IBAT2L (0) 629 #define CONFIG_SYS_IBAT2U (0) 630 #endif 631 632 #ifdef CONFIG_MPC83XX_PCI2 633 #define CONFIG_SYS_IBAT3L (CONFIG_SYS_PCI2_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) 634 #define CONFIG_SYS_IBAT3U (CONFIG_SYS_PCI2_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) 635 #define CONFIG_SYS_IBAT4L (CONFIG_SYS_PCI2_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) 636 #define CONFIG_SYS_IBAT4U (CONFIG_SYS_PCI2_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP) 637 #else 638 #define CONFIG_SYS_IBAT3L (0) 639 #define CONFIG_SYS_IBAT3U (0) 640 #define CONFIG_SYS_IBAT4L (0) 641 #define CONFIG_SYS_IBAT4U (0) 642 #endif 643 644 /* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */ 645 #define CONFIG_SYS_IBAT5L (CONFIG_SYS_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) 646 #define CONFIG_SYS_IBAT5U (CONFIG_SYS_IMMR | BATU_BL_256M | BATU_VS | BATU_VP) 647 648 /* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */ 649 #define CONFIG_SYS_IBAT6L (0xF0000000 | BATL_PP_10 | BATL_MEMCOHERENCE | \ 650 BATL_GUARDEDSTORAGE) 651 #define CONFIG_SYS_IBAT6U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) 652 653 #define CONFIG_SYS_IBAT7L (0) 654 #define CONFIG_SYS_IBAT7U (0) 655 656 #define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L 657 #define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U 658 #define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L 659 #define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U 660 #define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L 661 #define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U 662 #define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L 663 #define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U 664 #define CONFIG_SYS_DBAT4L CONFIG_SYS_IBAT4L 665 #define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U 666 #define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L 667 #define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U 668 #define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L 669 #define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U 670 #define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L 671 #define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U 672 673 /* 674 * Internal Definitions 675 * 676 * Boot Flags 677 */ 678 #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ 679 #define BOOTFLAG_WARM 0x02 /* Software reboot */ 680 681 #if defined(CONFIG_CMD_KGDB) 682 #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ 683 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ 684 #endif 685 686 /* 687 * Environment Configuration 688 */ 689 #define CONFIG_ENV_OVERWRITE 690 691 #if defined(CONFIG_TSEC_ENET) 692 #define CONFIG_ETHADDR 00:04:9f:ef:23:33 693 #define CONFIG_HAS_ETH1 694 #define CONFIG_HAS_ETH0 695 #define CONFIG_ETH1ADDR 00:E0:0C:00:7E:21 696 #endif 697 698 #define CONFIG_IPADDR 192.168.1.253 699 700 #define CONFIG_HOSTNAME mpc8349emds 701 #define CONFIG_ROOTPATH /nfsroot/rootfs 702 #define CONFIG_BOOTFILE uImage 703 704 #define CONFIG_SERVERIP 192.168.1.1 705 #define CONFIG_GATEWAYIP 192.168.1.1 706 #define CONFIG_NETMASK 255.255.255.0 707 708 #define CONFIG_LOADADDR 500000 /* default location for tftp and bootm */ 709 710 #define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */ 711 #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ 712 713 #define CONFIG_BAUDRATE 115200 714 715 #define CONFIG_PREBOOT "echo;" \ 716 "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ 717 "echo" 718 719 #define CONFIG_EXTRA_ENV_SETTINGS \ 720 "netdev=eth0\0" \ 721 "hostname=mpc8349emds\0" \ 722 "nfsargs=setenv bootargs root=/dev/nfs rw " \ 723 "nfsroot=${serverip}:${rootpath}\0" \ 724 "ramargs=setenv bootargs root=/dev/ram rw\0" \ 725 "addip=setenv bootargs ${bootargs} " \ 726 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ 727 ":${hostname}:${netdev}:off panic=1\0" \ 728 "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\ 729 "flash_nfs=run nfsargs addip addtty;" \ 730 "bootm ${kernel_addr}\0" \ 731 "flash_self=run ramargs addip addtty;" \ 732 "bootm ${kernel_addr} ${ramdisk_addr}\0" \ 733 "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ 734 "bootm\0" \ 735 "load=tftp 100000 /tftpboot/mpc8349emds/u-boot.bin\0" \ 736 "update=protect off fe000000 fe03ffff; " \ 737 "era fe000000 fe03ffff; cp.b 100000 fe000000 ${filesize}\0" \ 738 "upd=run load update\0" \ 739 "fdtaddr=400000\0" \ 740 "fdtfile=mpc8349emds.dtb\0" \ 741 "" 742 743 #define CONFIG_NFSBOOTCOMMAND \ 744 "setenv bootargs root=/dev/nfs rw " \ 745 "nfsroot=$serverip:$rootpath " \ 746 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 747 "console=$consoledev,$baudrate $othbootargs;" \ 748 "tftp $loadaddr $bootfile;" \ 749 "tftp $fdtaddr $fdtfile;" \ 750 "bootm $loadaddr - $fdtaddr" 751 752 #define CONFIG_RAMBOOTCOMMAND \ 753 "setenv bootargs root=/dev/ram rw " \ 754 "console=$consoledev,$baudrate $othbootargs;" \ 755 "tftp $ramdiskaddr $ramdiskfile;" \ 756 "tftp $loadaddr $bootfile;" \ 757 "tftp $fdtaddr $fdtfile;" \ 758 "bootm $loadaddr $ramdiskaddr $fdtaddr" 759 760 #define CONFIG_BOOTCOMMAND "run flash_self" 761 762 #endif /* __CONFIG_H */ 763