1 /* 2 * Copyright (C) 2007-2010 Freescale Semiconductor, Inc. 3 * 4 * Dave Liu <daveliu@freescale.com> 5 * 6 * See file CREDITS for list of people who contributed to this 7 * project. 8 * 9 * This program is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License as 11 * published by the Free Software Foundation; either version 2 of 12 * the License, or (at your option) any later version. 13 * 14 * This program is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * You should have received a copy of the GNU General Public License 20 * along with this program; if not, write to the Free Software 21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 22 * MA 02111-1307 USA 23 */ 24 25 #ifndef __CONFIG_H 26 #define __CONFIG_H 27 28 #define CONFIG_SYS_NAND_U_BOOT_SIZE (512 << 10) 29 #define CONFIG_SYS_NAND_U_BOOT_DST 0x00100000 30 #define CONFIG_SYS_NAND_U_BOOT_START 0x00100100 31 #define CONFIG_SYS_NAND_U_BOOT_OFFS 16384 32 #define CONFIG_SYS_NAND_U_BOOT_RELOC 0x00010000 33 34 #ifdef CONFIG_NAND_U_BOOT 35 #define CONFIG_SYS_TEXT_BASE 0x00100000 /* CONFIG_SYS_NAND_U_BOOT_DST */ 36 #define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000 37 #ifdef CONFIG_NAND_SPL 38 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */ 39 #endif /* CONFIG_NAND_SPL */ 40 #endif /* CONFIG_NAND_U_BOOT */ 41 42 #ifndef CONFIG_SYS_TEXT_BASE 43 #define CONFIG_SYS_TEXT_BASE 0xFE000000 44 #endif 45 46 #ifndef CONFIG_SYS_MONITOR_BASE 47 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 48 #endif 49 50 /* 51 * High Level Configuration Options 52 */ 53 #define CONFIG_E300 1 /* E300 family */ 54 #define CONFIG_MPC83xx 1 /* MPC83xx family */ 55 #define CONFIG_MPC831x 1 /* MPC831x CPU family */ 56 #define CONFIG_MPC8315 1 /* MPC8315 CPU specific */ 57 #define CONFIG_MPC8315ERDB 1 /* MPC8315ERDB board specific */ 58 59 /* 60 * System Clock Setup 61 */ 62 #define CONFIG_83XX_CLKIN 66666667 /* in Hz */ 63 #define CONFIG_SYS_CLK_FREQ CONFIG_83XX_CLKIN 64 65 /* 66 * Hardware Reset Configuration Word 67 * if CLKIN is 66.66MHz, then 68 * CSB = 133MHz, CORE = 400MHz, DDRC = 266MHz, LBC = 133MHz 69 */ 70 #define CONFIG_SYS_HRCW_LOW (\ 71 HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ 72 HRCWL_DDR_TO_SCB_CLK_2X1 |\ 73 HRCWL_SVCOD_DIV_2 |\ 74 HRCWL_CSB_TO_CLKIN_2X1 |\ 75 HRCWL_CORE_TO_CSB_3X1) 76 #define CONFIG_SYS_HRCW_HIGH_BASE (\ 77 HRCWH_PCI_HOST |\ 78 HRCWH_PCI1_ARBITER_ENABLE |\ 79 HRCWH_CORE_ENABLE |\ 80 HRCWH_BOOTSEQ_DISABLE |\ 81 HRCWH_SW_WATCHDOG_DISABLE |\ 82 HRCWH_TSEC1M_IN_RGMII |\ 83 HRCWH_TSEC2M_IN_RGMII |\ 84 HRCWH_BIG_ENDIAN |\ 85 HRCWH_LALE_NORMAL) 86 87 #ifdef CONFIG_NAND_SPL 88 #define CONFIG_SYS_HRCW_HIGH (CONFIG_SYS_HRCW_HIGH_BASE |\ 89 HRCWH_FROM_0XFFF00100 |\ 90 HRCWH_ROM_LOC_NAND_SP_8BIT |\ 91 HRCWH_RL_EXT_NAND) 92 #else 93 #define CONFIG_SYS_HRCW_HIGH (CONFIG_SYS_HRCW_HIGH_BASE |\ 94 HRCWH_FROM_0X00000100 |\ 95 HRCWH_ROM_LOC_LOCAL_16BIT |\ 96 HRCWH_RL_EXT_LEGACY) 97 #endif 98 99 /* 100 * System IO Config 101 */ 102 #define CONFIG_SYS_SICRH 0x00000000 103 #define CONFIG_SYS_SICRL 0x00000000 /* 3.3V, no delay */ 104 105 #define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */ 106 #define CONFIG_HWCONFIG 107 108 /* 109 * IMMR new address 110 */ 111 #define CONFIG_SYS_IMMR 0xE0000000 112 113 #if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) 114 #define CONFIG_DEFAULT_IMMR CONFIG_SYS_IMMR 115 #endif 116 117 /* 118 * Arbiter Setup 119 */ 120 #define CONFIG_SYS_ACR_PIPE_DEP 3 /* Arbiter pipeline depth is 4 */ 121 #define CONFIG_SYS_ACR_RPTCNT 3 /* Arbiter repeat count is 4 */ 122 #define CONFIG_SYS_SPCR_TSECEP 3 /* eTSEC emergency priority is highest */ 123 124 /* 125 * DDR Setup 126 */ 127 #define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory */ 128 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE 129 #define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE 130 #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05 131 #define CONFIG_SYS_DDRCDR_VALUE ( DDRCDR_EN \ 132 | DDRCDR_PZ_LOZ \ 133 | DDRCDR_NZ_LOZ \ 134 | DDRCDR_ODT \ 135 | DDRCDR_Q_DRN ) 136 /* 0x7b880001 */ 137 /* 138 * Manually set up DDR parameters 139 * consist of two chips HY5PS12621BFP-C4 from HYNIX 140 */ 141 #define CONFIG_SYS_DDR_SIZE 128 /* MB */ 142 #define CONFIG_SYS_DDR_CS0_BNDS 0x00000007 143 #define CONFIG_SYS_DDR_CS0_CONFIG ( CSCONFIG_EN \ 144 | 0x00010000 /* ODT_WR to CSn */ \ 145 | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10 ) 146 /* 0x80010102 */ 147 #define CONFIG_SYS_DDR_TIMING_3 0x00000000 148 #define CONFIG_SYS_DDR_TIMING_0 ( ( 0 << TIMING_CFG0_RWT_SHIFT ) \ 149 | ( 0 << TIMING_CFG0_WRT_SHIFT ) \ 150 | ( 0 << TIMING_CFG0_RRT_SHIFT ) \ 151 | ( 0 << TIMING_CFG0_WWT_SHIFT ) \ 152 | ( 2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT ) \ 153 | ( 2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT ) \ 154 | ( 8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT ) \ 155 | ( 2 << TIMING_CFG0_MRS_CYC_SHIFT ) ) 156 /* 0x00220802 */ 157 #define CONFIG_SYS_DDR_TIMING_1 ( ( 2 << TIMING_CFG1_PRETOACT_SHIFT ) \ 158 | ( 7 << TIMING_CFG1_ACTTOPRE_SHIFT ) \ 159 | ( 2 << TIMING_CFG1_ACTTORW_SHIFT ) \ 160 | ( 5 << TIMING_CFG1_CASLAT_SHIFT ) \ 161 | ( 6 << TIMING_CFG1_REFREC_SHIFT ) \ 162 | ( 2 << TIMING_CFG1_WRREC_SHIFT ) \ 163 | ( 2 << TIMING_CFG1_ACTTOACT_SHIFT ) \ 164 | ( 2 << TIMING_CFG1_WRTORD_SHIFT ) ) 165 /* 0x27256222 */ 166 #define CONFIG_SYS_DDR_TIMING_2 ( ( 1 << TIMING_CFG2_ADD_LAT_SHIFT ) \ 167 | ( 4 << TIMING_CFG2_CPO_SHIFT ) \ 168 | ( 2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT ) \ 169 | ( 2 << TIMING_CFG2_RD_TO_PRE_SHIFT ) \ 170 | ( 2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT ) \ 171 | ( 3 << TIMING_CFG2_CKE_PLS_SHIFT ) \ 172 | ( 5 << TIMING_CFG2_FOUR_ACT_SHIFT) ) 173 /* 0x121048c5 */ 174 #define CONFIG_SYS_DDR_INTERVAL ( ( 0x0360 << SDRAM_INTERVAL_REFINT_SHIFT ) \ 175 | ( 0x0100 << SDRAM_INTERVAL_BSTOPRE_SHIFT ) ) 176 /* 0x03600100 */ 177 #define CONFIG_SYS_DDR_SDRAM_CFG ( SDRAM_CFG_SREN \ 178 | SDRAM_CFG_SDRAM_TYPE_DDR2 \ 179 | SDRAM_CFG_32_BE ) 180 /* 0x43080000 */ 181 #define CONFIG_SYS_DDR_SDRAM_CFG2 0x00401000 /* 1 posted refresh */ 182 #define CONFIG_SYS_DDR_MODE ( ( 0x0448 << SDRAM_MODE_ESD_SHIFT ) \ 183 | ( 0x0232 << SDRAM_MODE_SD_SHIFT ) ) 184 /* ODT 150ohm CL=3, AL=1 on SDRAM */ 185 #define CONFIG_SYS_DDR_MODE2 0x00000000 186 187 /* 188 * Memory test 189 */ 190 #undef CONFIG_SYS_DRAM_TEST /* memory test, takes time */ 191 #define CONFIG_SYS_MEMTEST_START 0x00040000 /* memtest region */ 192 #define CONFIG_SYS_MEMTEST_END 0x00140000 193 194 /* 195 * The reserved memory 196 */ 197 #define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */ 198 #define CONFIG_SYS_MALLOC_LEN (512 * 1024) /* Reserved for malloc */ 199 200 /* 201 * Initial RAM Base Address Setup 202 */ 203 #define CONFIG_SYS_INIT_RAM_LOCK 1 204 #define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ 205 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM */ 206 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 207 208 /* 209 * Local Bus Configuration & Clock Setup 210 */ 211 #define CONFIG_SYS_LCRR_DBYP LCRR_DBYP 212 #define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_2 213 #define CONFIG_SYS_LBC_LBCR 0x00040000 214 #define CONFIG_FSL_ELBC 1 215 216 /* 217 * FLASH on the Local Bus 218 */ 219 #define CONFIG_SYS_FLASH_CFI /* use the Common Flash Interface */ 220 #define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */ 221 #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT 222 223 #define CONFIG_SYS_FLASH_BASE 0xFE000000 /* FLASH base address */ 224 #define CONFIG_SYS_FLASH_SIZE 8 /* FLASH size is 8M */ 225 #define CONFIG_SYS_FLASH_PROTECTION 1 /* Use h/w Flash protection. */ 226 227 #define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE /* Window base at flash base */ 228 #define CONFIG_SYS_LBLAWAR0_PRELIM 0x80000016 /* 8MB window size */ 229 230 #define CONFIG_SYS_NOR_BR_PRELIM (CONFIG_SYS_FLASH_BASE \ 231 | (2 << BR_PS_SHIFT) /* 16 bit port size */ \ 232 | BR_V ) /* valid */ 233 #define CONFIG_SYS_NOR_OR_PRELIM ((~(CONFIG_SYS_FLASH_SIZE - 1) << 20) \ 234 | OR_UPM_XAM \ 235 | OR_GPCM_CSNT \ 236 | OR_GPCM_ACS_DIV2 \ 237 | OR_GPCM_XACS \ 238 | OR_GPCM_SCY_15 \ 239 | OR_GPCM_TRLX \ 240 | OR_GPCM_EHTR \ 241 | OR_GPCM_EAD ) 242 243 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ 244 #define CONFIG_SYS_MAX_FLASH_SECT 135 /* 127 64KB sectors and 8 8KB top sectors per device */ 245 246 #undef CONFIG_SYS_FLASH_CHECKSUM 247 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 248 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 249 250 /* 251 * NAND Flash on the Local Bus 252 */ 253 254 #ifdef CONFIG_NAND_SPL 255 #define CONFIG_SYS_NAND_BASE 0xFFF00000 256 #else 257 #define CONFIG_SYS_NAND_BASE 0xE0600000 258 #endif 259 260 #define CONFIG_MTD_DEVICE 261 #define CONFIG_MTD_PARTITION 262 #define CONFIG_CMD_MTDPARTS 263 #define MTDIDS_DEFAULT "nand0=e0600000.flash" 264 #define MTDPARTS_DEFAULT \ 265 "mtdparts=e0600000.flash:512k(uboot),128k(env),3m@1m(kernel),-(fs)" 266 267 #define CONFIG_SYS_MAX_NAND_DEVICE 1 268 #define CONFIG_MTD_NAND_VERIFY_WRITE 1 269 #define CONFIG_CMD_NAND 1 270 #define CONFIG_NAND_FSL_ELBC 1 271 #define CONFIG_SYS_NAND_BLOCK_SIZE 16384 272 273 #define CONFIG_SYS_NAND_U_BOOT_SIZE (512 << 10) 274 #define CONFIG_SYS_NAND_U_BOOT_DST 0x00100000 275 #define CONFIG_SYS_NAND_U_BOOT_START 0x00100100 276 #define CONFIG_SYS_NAND_U_BOOT_OFFS 16384 277 #define CONFIG_SYS_NAND_U_BOOT_RELOC 0x00010000 278 279 #define CONFIG_SYS_NAND_BR_PRELIM (CONFIG_SYS_NAND_BASE \ 280 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ 281 | BR_PS_8 /* Port Size = 8 bit */ \ 282 | BR_MS_FCM /* MSEL = FCM */ \ 283 | BR_V ) /* valid */ 284 #define CONFIG_SYS_NAND_OR_PRELIM (0xFFFF8000 /* length 32K */ \ 285 | OR_FCM_CSCT \ 286 | OR_FCM_CST \ 287 | OR_FCM_CHT \ 288 | OR_FCM_SCY_1 \ 289 | OR_FCM_TRLX \ 290 | OR_FCM_EHTR ) 291 /* 0xFFFF8396 */ 292 293 #ifdef CONFIG_NAND_U_BOOT 294 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM 295 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM 296 #define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NOR_BR_PRELIM 297 #define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NOR_OR_PRELIM 298 #else 299 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NOR_BR_PRELIM 300 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NOR_OR_PRELIM 301 #define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM 302 #define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM 303 #endif 304 305 #define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_NAND_BASE 306 #define CONFIG_SYS_LBLAWAR1_PRELIM 0x8000000E /* 32KB */ 307 308 #define CONFIG_SYS_NAND_LBLAWBAR_PRELIM CONFIG_SYS_LBLAWBAR1_PRELIM 309 #define CONFIG_SYS_NAND_LBLAWAR_PRELIM CONFIG_SYS_LBLAWAR1_PRELIM 310 311 #if CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE && \ 312 !defined(CONFIG_NAND_SPL) 313 #define CONFIG_SYS_RAMBOOT 314 #else 315 #undef CONFIG_SYS_RAMBOOT 316 #endif 317 318 /* 319 * Serial Port 320 */ 321 #define CONFIG_CONS_INDEX 1 322 #define CONFIG_SYS_NS16550 323 #define CONFIG_SYS_NS16550_SERIAL 324 #define CONFIG_SYS_NS16550_REG_SIZE 1 325 #define CONFIG_SYS_NS16550_CLK (CONFIG_83XX_CLKIN * 2) 326 327 #define CONFIG_SYS_BAUDRATE_TABLE \ 328 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 329 330 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500) 331 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600) 332 333 /* Use the HUSH parser */ 334 #define CONFIG_SYS_HUSH_PARSER 335 #ifdef CONFIG_SYS_HUSH_PARSER 336 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 337 #endif 338 339 /* Pass open firmware flat tree */ 340 #define CONFIG_OF_LIBFDT 1 341 #define CONFIG_OF_BOARD_SETUP 1 342 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 343 344 /* I2C */ 345 #define CONFIG_HARD_I2C /* I2C with hardware support */ 346 #define CONFIG_FSL_I2C 347 #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ 348 #define CONFIG_SYS_I2C_SLAVE 0x7F 349 #define CONFIG_SYS_I2C_NOPROBES {0x51} /* Don't probe these addrs */ 350 #define CONFIG_SYS_I2C_OFFSET 0x3000 351 #define CONFIG_SYS_I2C2_OFFSET 0x3100 352 353 /* 354 * Board info - revision and where boot from 355 */ 356 #define CONFIG_SYS_I2C_PCF8574A_ADDR 0x39 357 358 /* 359 * Config on-board RTC 360 */ 361 #define CONFIG_RTC_DS1337 /* ds1339 on board, use ds1337 rtc via i2c */ 362 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 /* at address 0x68 */ 363 364 /* 365 * General PCI 366 * Addresses are mapped 1-1. 367 */ 368 #define CONFIG_SYS_PCI_MEM_BASE 0x80000000 369 #define CONFIG_SYS_PCI_MEM_PHYS CONFIG_SYS_PCI_MEM_BASE 370 #define CONFIG_SYS_PCI_MEM_SIZE 0x10000000 /* 256M */ 371 #define CONFIG_SYS_PCI_MMIO_BASE 0x90000000 372 #define CONFIG_SYS_PCI_MMIO_PHYS CONFIG_SYS_PCI_MMIO_BASE 373 #define CONFIG_SYS_PCI_MMIO_SIZE 0x10000000 /* 256M */ 374 #define CONFIG_SYS_PCI_IO_BASE 0x00000000 375 #define CONFIG_SYS_PCI_IO_PHYS 0xE0300000 376 #define CONFIG_SYS_PCI_IO_SIZE 0x100000 /* 1M */ 377 378 #define CONFIG_SYS_PCI_SLV_MEM_LOCAL CONFIG_SYS_SDRAM_BASE 379 #define CONFIG_SYS_PCI_SLV_MEM_BUS 0x00000000 380 #define CONFIG_SYS_PCI_SLV_MEM_SIZE 0x80000000 381 382 #define CONFIG_SYS_PCIE1_BASE 0xA0000000 383 #define CONFIG_SYS_PCIE1_MEM_BASE 0xA0000000 384 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xA0000000 385 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 386 #define CONFIG_SYS_PCIE1_CFG_BASE 0xB0000000 387 #define CONFIG_SYS_PCIE1_CFG_SIZE 0x01000000 388 #define CONFIG_SYS_PCIE1_IO_BASE 0x00000000 389 #define CONFIG_SYS_PCIE1_IO_PHYS 0xB1000000 390 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00800000 391 392 #define CONFIG_SYS_PCIE2_BASE 0xC0000000 393 #define CONFIG_SYS_PCIE2_MEM_BASE 0xC0000000 394 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xC0000000 395 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 396 #define CONFIG_SYS_PCIE2_CFG_BASE 0xD0000000 397 #define CONFIG_SYS_PCIE2_CFG_SIZE 0x01000000 398 #define CONFIG_SYS_PCIE2_IO_BASE 0x00000000 399 #define CONFIG_SYS_PCIE2_IO_PHYS 0xD1000000 400 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00800000 401 402 #define CONFIG_PCI 403 #define CONFIG_PCIE 404 405 #define CONFIG_NET_MULTI 406 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 407 408 #define CONFIG_EEPRO100 409 #undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 410 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */ 411 412 #ifndef CONFIG_NET_MULTI 413 #define CONFIG_NET_MULTI 1 414 #endif 415 416 #define CONFIG_HAS_FSL_DR_USB 417 #define CONFIG_SYS_SCCR_USBDRCM 3 418 419 #define CONFIG_CMD_USB 420 #define CONFIG_USB_STORAGE 421 #define CONFIG_USB_EHCI 422 #define CONFIG_USB_EHCI_FSL 423 #define CONFIG_USB_PHY_TYPE "utmi" 424 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 425 426 /* 427 * TSEC 428 */ 429 #define CONFIG_TSEC_ENET /* TSEC ethernet support */ 430 #define CONFIG_SYS_TSEC1_OFFSET 0x24000 431 #define CONFIG_SYS_TSEC1 (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET) 432 #define CONFIG_SYS_TSEC2_OFFSET 0x25000 433 #define CONFIG_SYS_TSEC2 (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC2_OFFSET) 434 435 /* 436 * TSEC ethernet configuration 437 */ 438 #define CONFIG_MII 1 /* MII PHY management */ 439 #define CONFIG_TSEC1 1 440 #define CONFIG_TSEC1_NAME "eTSEC0" 441 #define CONFIG_TSEC2 1 442 #define CONFIG_TSEC2_NAME "eTSEC1" 443 #define TSEC1_PHY_ADDR 0 444 #define TSEC2_PHY_ADDR 1 445 #define TSEC1_PHYIDX 0 446 #define TSEC2_PHYIDX 0 447 #define TSEC1_FLAGS TSEC_GIGABIT 448 #define TSEC2_FLAGS TSEC_GIGABIT 449 450 /* Options are: eTSEC[0-1] */ 451 #define CONFIG_ETHPRIME "eTSEC1" 452 453 /* 454 * SATA 455 */ 456 #define CONFIG_LIBATA 457 #define CONFIG_FSL_SATA 458 459 #define CONFIG_SYS_SATA_MAX_DEVICE 2 460 #define CONFIG_SATA1 461 #define CONFIG_SYS_SATA1_OFFSET 0x18000 462 #define CONFIG_SYS_SATA1 (CONFIG_SYS_IMMR + CONFIG_SYS_SATA1_OFFSET) 463 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 464 #define CONFIG_SATA2 465 #define CONFIG_SYS_SATA2_OFFSET 0x19000 466 #define CONFIG_SYS_SATA2 (CONFIG_SYS_IMMR + CONFIG_SYS_SATA2_OFFSET) 467 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA 468 469 #ifdef CONFIG_FSL_SATA 470 #define CONFIG_LBA48 471 #define CONFIG_CMD_SATA 472 #define CONFIG_DOS_PARTITION 473 #define CONFIG_CMD_EXT2 474 #endif 475 476 /* 477 * Environment 478 */ 479 #if defined(CONFIG_NAND_U_BOOT) 480 #define CONFIG_ENV_IS_IN_NAND 1 481 #define CONFIG_ENV_OFFSET (512 * 1024) 482 #define CONFIG_ENV_SECT_SIZE CONFIG_SYS_NAND_BLOCK_SIZE 483 #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE 484 #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE 485 #define CONFIG_ENV_RANGE (CONFIG_ENV_SECT_SIZE * 4) 486 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \ 487 CONFIG_ENV_RANGE) 488 #elif !defined(CONFIG_SYS_RAMBOOT) 489 #define CONFIG_ENV_IS_IN_FLASH 1 490 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) 491 #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K(one sector) for env */ 492 #define CONFIG_ENV_SIZE 0x2000 493 #else 494 #define CONFIG_SYS_NO_FLASH 1 /* Flash is not usable now */ 495 #define CONFIG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ 496 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) 497 #define CONFIG_ENV_SIZE 0x2000 498 #endif 499 500 #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ 501 #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ 502 503 /* 504 * BOOTP options 505 */ 506 #define CONFIG_BOOTP_BOOTFILESIZE 507 #define CONFIG_BOOTP_BOOTPATH 508 #define CONFIG_BOOTP_GATEWAY 509 #define CONFIG_BOOTP_HOSTNAME 510 511 /* 512 * Command line configuration. 513 */ 514 #include <config_cmd_default.h> 515 516 #define CONFIG_CMD_PING 517 #define CONFIG_CMD_I2C 518 #define CONFIG_CMD_MII 519 #define CONFIG_CMD_DATE 520 #define CONFIG_CMD_PCI 521 522 #if defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_NAND_U_BOOT) 523 #undef CONFIG_CMD_SAVEENV 524 #undef CONFIG_CMD_LOADS 525 #endif 526 527 #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ 528 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 529 530 #undef CONFIG_WATCHDOG /* watchdog disabled */ 531 532 /* 533 * Miscellaneous configurable options 534 */ 535 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 536 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 537 #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ 538 539 #if defined(CONFIG_CMD_KGDB) 540 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 541 #else 542 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 543 #endif 544 545 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ 546 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 547 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 548 #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ 549 550 /* 551 * For booting Linux, the board info and command line data 552 * have to be in the first 256 MB of memory, since this is 553 * the maximum mapped by the Linux kernel during initialization. 554 */ 555 #define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* Initial Memory map for Linux */ 556 557 /* 558 * Core HID Setup 559 */ 560 #define CONFIG_SYS_HID0_INIT 0x000000000 561 #define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \ 562 HID0_ENABLE_INSTRUCTION_CACHE | \ 563 HID0_ENABLE_DYNAMIC_POWER_MANAGMENT) 564 #define CONFIG_SYS_HID2 HID2_HBE 565 566 /* 567 * MMU Setup 568 */ 569 #define CONFIG_HIGH_BATS 1 /* High BATs supported */ 570 571 /* DDR: cache cacheable */ 572 #define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) 573 #define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_128M | BATU_VS | BATU_VP) 574 #define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L 575 #define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U 576 577 /* IMMRBAR, PCI IO and NAND: cache-inhibit and guarded */ 578 #define CONFIG_SYS_IBAT1L (CONFIG_SYS_IMMR | BATL_PP_10 | \ 579 BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) 580 #define CONFIG_SYS_IBAT1U (CONFIG_SYS_IMMR | BATU_BL_8M | BATU_VS | BATU_VP) 581 #define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L 582 #define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U 583 584 /* FLASH: icache cacheable, but dcache-inhibit and guarded */ 585 #define CONFIG_SYS_IBAT2L (CONFIG_SYS_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) 586 #define CONFIG_SYS_IBAT2U (CONFIG_SYS_FLASH_BASE | BATU_BL_32M | \ 587 BATU_VS | BATU_VP) 588 #define CONFIG_SYS_DBAT2L (CONFIG_SYS_FLASH_BASE | BATL_PP_10 | \ 589 BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) 590 #define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U 591 592 /* Stack in dcache: cacheable, no memory coherence */ 593 #define CONFIG_SYS_IBAT3L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10) 594 #define CONFIG_SYS_IBAT3U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) 595 #define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L 596 #define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U 597 598 /* PCI MEM space: cacheable */ 599 #define CONFIG_SYS_IBAT4L (CONFIG_SYS_PCI_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE) 600 #define CONFIG_SYS_IBAT4U (CONFIG_SYS_PCI_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP) 601 #define CONFIG_SYS_DBAT4L CONFIG_SYS_IBAT4L 602 #define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U 603 604 /* PCI MMIO space: cache-inhibit and guarded */ 605 #define CONFIG_SYS_IBAT5L (CONFIG_SYS_PCI_MMIO_PHYS | BATL_PP_10 | \ 606 BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) 607 #define CONFIG_SYS_IBAT5U (CONFIG_SYS_PCI_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP) 608 #define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L 609 #define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U 610 611 #define CONFIG_SYS_IBAT6L 0 612 #define CONFIG_SYS_IBAT6U 0 613 #define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L 614 #define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U 615 616 #define CONFIG_SYS_IBAT7L 0 617 #define CONFIG_SYS_IBAT7U 0 618 #define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L 619 #define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U 620 621 #if defined(CONFIG_CMD_KGDB) 622 #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ 623 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ 624 #endif 625 626 /* 627 * Environment Configuration 628 */ 629 630 #define CONFIG_ENV_OVERWRITE 631 632 #if defined(CONFIG_TSEC_ENET) 633 #define CONFIG_HAS_ETH0 634 #define CONFIG_HAS_ETH1 635 #endif 636 637 #define CONFIG_BAUDRATE 115200 638 639 #define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */ 640 641 #define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */ 642 #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ 643 644 #define CONFIG_EXTRA_ENV_SETTINGS \ 645 "netdev=eth0\0" \ 646 "consoledev=ttyS0\0" \ 647 "ramdiskaddr=1000000\0" \ 648 "ramdiskfile=ramfs.83xx\0" \ 649 "fdtaddr=780000\0" \ 650 "fdtfile=mpc8315erdb.dtb\0" \ 651 "usb_phy_type=utmi\0" \ 652 "" 653 654 #define CONFIG_NFSBOOTCOMMAND \ 655 "setenv bootargs root=/dev/nfs rw " \ 656 "nfsroot=$serverip:$rootpath " \ 657 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 658 "console=$consoledev,$baudrate $othbootargs;" \ 659 "tftp $loadaddr $bootfile;" \ 660 "tftp $fdtaddr $fdtfile;" \ 661 "bootm $loadaddr - $fdtaddr" 662 663 #define CONFIG_RAMBOOTCOMMAND \ 664 "setenv bootargs root=/dev/ram rw " \ 665 "console=$consoledev,$baudrate $othbootargs;" \ 666 "tftp $ramdiskaddr $ramdiskfile;" \ 667 "tftp $loadaddr $bootfile;" \ 668 "tftp $fdtaddr $fdtfile;" \ 669 "bootm $loadaddr $ramdiskaddr $fdtaddr" 670 671 672 #define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND 673 674 #endif /* __CONFIG_H */ 675