1 /* 2 * Copyright (C) 2010-2017 CS Systemes d'Information 3 * Christophe Leroy <christophe.leroy@c-s.fr> 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8 #ifndef __CONFIG_H 9 #define __CONFIG_H 10 11 /* High Level Configuration Options */ 12 #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ 13 #define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ 14 15 #define CONFIG_EXTRA_ENV_SETTINGS \ 16 "sdram_type=SDRAM\0" \ 17 "flash_type=AM29LV160DB\0" \ 18 "loadaddr=0x400000\0" \ 19 "filename=uImage.lzma\0" \ 20 "nfsroot=/opt/ofs\0" \ 21 "dhcp_ip=ip=:::::eth0:dhcp\0" \ 22 "console_args=console=ttyCPM0,115200N8\0" \ 23 "flashboot=setenv bootargs " \ 24 "${console_args} " \ 25 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \ 26 "mcr3k:eth0:off;" \ 27 "${ofl_args}; " \ 28 "bootm 0x04060000 - 0x04050000\0" \ 29 "tftpboot=setenv bootargs " \ 30 "${console_args} " \ 31 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \ 32 "mcr3k:eth0:off " \ 33 "${ofl_args}; " \ 34 "tftp ${loadaddr} ${filename};" \ 35 "tftp 0xf00000 mcr3000.dtb;" \ 36 "bootm ${loadaddr} - 0xf00000\0" \ 37 "netboot=dhcp ${loadaddr} ${filename};" \ 38 "tftp 0xf00000 mcr3000.dtb;" \ 39 "setenv bootargs " \ 40 "root=/dev/nfs rw " \ 41 "${console_args} " \ 42 "${dhcp_ip};" \ 43 "bootm ${loadaddr} - 0xf00000\0" \ 44 "nfsboot=setenv bootargs " \ 45 "root=/dev/nfs rw nfsroot=${serverip}:${nfsroot} " \ 46 "${console_args} " \ 47 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \ 48 "mcr3k:eth0:off;" \ 49 "bootm 0x04060000 - 0x04050000\0" \ 50 "dhcpboot=dhcp ${loadaddr} ${filename};" \ 51 "tftp 0xf00000 mcr3000.dtb;" \ 52 "setenv bootargs " \ 53 "${console_args} " \ 54 "${dhcp_ip} " \ 55 "${ofl_args}; " \ 56 "bootm ${loadaddr} - 0xf00000\0" 57 58 #define CONFIG_BOOTDELAY 5 59 60 #define CONFIG_IPADDR 192.168.0.3 61 #define CONFIG_SERVERIP 192.168.0.1 62 #define CONFIG_NETMASK 255.0.0.0 63 64 #define CONFIG_BOOTCOMMAND "run flashboot" 65 #define CONFIG_BOOTARGS "ubi.mtd=4 root=ubi0:rootfs rw " \ 66 "rootfstype=ubifs rootflags=sync " \ 67 "console=ttyCPM0,115200N8 " \ 68 "ip=${ipaddr}:::${netmask}:mcr3k:eth0:off" 69 70 #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ 71 #undef CONFIG_LOADS_BAUD_CHANGE /* don't allow baudrate change */ 72 73 #define CONFIG_WATCHDOG 1 /* watchdog enabled */ 74 75 /* Miscellaneous configurable options */ 76 #define CONFIG_SYS_LONGHELP 77 #define CONFIG_SYS_CBSIZE 256 78 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 79 #define CONFIG_SYS_MAXARGS 16 80 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 81 82 #define CONFIG_CMDLINE_EDITING 1 83 #ifdef CONFIG_HUSH_PARSER 84 #define CONFIG_SYS_PROMPT_HUSH_PS2 "S3K> " 85 #endif 86 87 #define CONFIG_SYS_MEMTEST_START 0x00002000 88 #define CONFIG_SYS_MEMTEST_END 0x00800000 89 90 #define CONFIG_SYS_LOAD_ADDR 0x200000 91 92 #define CONFIG_SYS_HZ 1000 93 94 /* Definitions for initial stack pointer and data area (in DPRAM) */ 95 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR 96 #define CONFIG_SYS_INIT_RAM_SIZE 0x2f00 97 #define CONFIG_SYS_GBL_DATA_SIZE 64 98 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ 99 CONFIG_SYS_GBL_DATA_SIZE) 100 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 101 102 /* RAM configuration (note that CONFIG_SYS_SDRAM_BASE must be zero) */ 103 #define CONFIG_SYS_SDRAM_BASE 0x00000000 104 #define SDRAM_MAX_SIZE (32 * 1024 * 1024) 105 106 /* FLASH organization */ 107 #define CONFIG_SYS_FLASH_BASE CONFIG_SYS_TEXT_BASE 108 #define CONFIG_SYS_FLASH_CFI 1 109 #define CONFIG_FLASH_CFI_DRIVER 1 110 #define CONFIG_SYS_MAX_FLASH_BANKS 1 111 #define CONFIG_SYS_MAX_FLASH_SECT 35 112 #define CONFIG_SYS_FLASH_ERASE_TOUT 120000 113 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 114 115 /* 116 * For booting Linux, the board info and command line data 117 * have to be in the first 8 MB of memory, since this is 118 * the maximum mapped by the Linux kernel during initialization. 119 */ 120 #define CONFIG_SYS_BOOTMAPSZ (8 << 20) 121 #define CONFIG_SYS_MONITOR_LEN (256 << 10) 122 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE 123 #define CONFIG_SYS_MALLOC_LEN (4096 << 10) 124 125 /* Environment Configuration */ 126 127 /* environment is in FLASH */ 128 #define CONFIG_ENV_SECT_SIZE (64 * 1024) 129 #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE 130 #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN) 131 #define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE) 132 #define CONFIG_ENV_OVERWRITE 1 133 134 /* Cache Configuration */ 135 #define CONFIG_SYS_CACHELINE_SIZE 16 136 137 /* Ethernet configuration part */ 138 #define CONFIG_SYS_DISCOVER_PHY 1 139 #ifdef CONFIG_MPC8XX_FEC 140 #define CONFIG_MII_INIT 1 141 #endif 142 143 /* NAND configuration part */ 144 #define CONFIG_SYS_MAX_NAND_DEVICE 1 145 #define CONFIG_SYS_NAND_MAX_CHIPS 1 146 #define CONFIG_SYS_NAND_BASE 0x0C000000 147 148 /* Internal Definitions */ 149 150 /* Boot Flags*/ 151 #define BOOTFLAG_COLD 0x01 152 #define BOOTFLAG_WARM 0x02 153 154 /* Misc Settings */ 155 #define CONFIG_CMD_REGINFO 156 157 #endif /* __CONFIG_H */ 158