1 /* 2 * Configuation settings for the Freescale MCF5485 FireEngine board. 3 * 4 * Copyright (C) 2004-2008 Freescale Semiconductor, Inc. 5 * TsiChung Liew (Tsi-Chung.Liew@freescale.com) 6 * 7 * See file CREDITS for list of people who contributed to this 8 * project. 9 * 10 * This program is free software; you can redistribute it and/or 11 * modify it under the terms of the GNU General Public License as 12 * published by the Free Software Foundation; either version 2 of 13 * the License, or (at your option) any later version. 14 * 15 * This program is distributed in the hope that it will be useful, 16 * but WITHOUT ANY WARRANTY; without even the implied warranty of 17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 18 * GNU General Public License for more details. 19 * 20 * You should have received a copy of the GNU General Public License 21 * along with this program; if not, write to the Free Software 22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 23 * MA 02111-1307 USA 24 */ 25 26 /* 27 * board/config.h - configuration options, board specific 28 */ 29 30 #ifndef _M5485EVB_H 31 #define _M5485EVB_H 32 33 /* 34 * High Level Configuration Options 35 * (easy to change) 36 */ 37 #define CONFIG_MCF547x_8x /* define processor family */ 38 #define CONFIG_M548x /* define processor type */ 39 #define CONFIG_M5485 /* define processor type */ 40 41 #define CONFIG_MCFUART 42 #define CONFIG_SYS_UART_PORT (0) 43 #define CONFIG_BAUDRATE 115200 44 #define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } 45 46 #define CONFIG_HW_WATCHDOG 47 #define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */ 48 49 /* Command line configuration */ 50 #include <config_cmd_default.h> 51 52 #define CONFIG_CMD_CACHE 53 #undef CONFIG_CMD_DATE 54 #define CONFIG_CMD_ELF 55 #define CONFIG_CMD_FLASH 56 #define CONFIG_CMD_I2C 57 #define CONFIG_CMD_MEMORY 58 #define CONFIG_CMD_MISC 59 #define CONFIG_CMD_MII 60 #define CONFIG_CMD_NET 61 #define CONFIG_CMD_PCI 62 #define CONFIG_CMD_PING 63 #define CONFIG_CMD_REGINFO 64 #define CONFIG_CMD_USB 65 66 #define CONFIG_SLTTMR 67 68 #define CONFIG_FSLDMAFEC 69 #ifdef CONFIG_FSLDMAFEC 70 # define CONFIG_NET_MULTI 1 71 # define CONFIG_MII 1 72 # define CONFIG_MII_INIT 1 73 # define CONFIG_HAS_ETH1 74 75 # define CONFIG_SYS_DMA_USE_INTSRAM 1 76 # define CONFIG_SYS_DISCOVER_PHY 77 # define CONFIG_SYS_RX_ETH_BUFFER 32 78 # define CONFIG_SYS_TX_ETH_BUFFER 48 79 # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 80 81 # define CONFIG_SYS_FEC0_PINMUX 0 82 # define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE 83 # define CONFIG_SYS_FEC1_PINMUX 0 84 # define CONFIG_SYS_FEC1_MIIBASE CONFIG_SYS_FEC0_IOBASE 85 86 # define MCFFEC_TOUT_LOOP 50000 87 /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */ 88 # ifndef CONFIG_SYS_DISCOVER_PHY 89 # define FECDUPLEX FULL 90 # define FECSPEED _100BASET 91 # else 92 # ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN 93 # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 94 # endif 95 # endif /* CONFIG_SYS_DISCOVER_PHY */ 96 97 # define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 98 # define CONFIG_ETH1ADDR 00:e0:0c:bc:e5:61 99 # define CONFIG_IPADDR 192.162.1.2 100 # define CONFIG_NETMASK 255.255.255.0 101 # define CONFIG_SERVERIP 192.162.1.1 102 # define CONFIG_GATEWAYIP 192.162.1.1 103 # define CONFIG_OVERWRITE_ETHADDR_ONCE 104 105 #endif 106 107 #ifdef CONFIG_CMD_USB 108 # define CONFIG_USB_STORAGE 109 # define CONFIG_DOS_PARTITION 110 # define CONFIG_USB_OHCI_NEW 111 # ifndef CONFIG_CMD_PCI 112 # define CONFIG_CMD_PCI 113 # endif 114 /*# define CONFIG_PCI_OHCI*/ 115 # define CONFIG_SYS_USB_OHCI_REGS_BASE 0x80041000 116 # define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15 117 # define CONFIG_SYS_USB_OHCI_SLOT_NAME "isp1561" 118 # define CONFIG_SYS_OHCI_SWAP_REG_ACCESS 119 #endif 120 121 /* I2C */ 122 #define CONFIG_FSL_I2C 123 #define CONFIG_HARD_I2C /* I2C with hw support */ 124 #undef CONFIG_SOFT_I2C /* I2C bit-banged */ 125 #define CONFIG_SYS_I2C_SPEED 80000 126 #define CONFIG_SYS_I2C_SLAVE 0x7F 127 #define CONFIG_SYS_I2C_OFFSET 0x00008F00 128 #define CONFIG_SYS_IMMR CONFIG_SYS_MBAR 129 130 /* PCI */ 131 #ifdef CONFIG_CMD_PCI 132 #define CONFIG_PCI 1 133 #define CONFIG_PCI_PNP 1 134 #define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1 135 136 #define CONFIG_SYS_PCI_MEM_BUS 0x80000000 137 #define CONFIG_SYS_PCI_MEM_PHYS CONFIG_SYS_PCI_MEM_BUS 138 #define CONFIG_SYS_PCI_MEM_SIZE 0x10000000 139 140 #define CONFIG_SYS_PCI_IO_BUS 0x71000000 141 #define CONFIG_SYS_PCI_IO_PHYS CONFIG_SYS_PCI_IO_BUS 142 #define CONFIG_SYS_PCI_IO_SIZE 0x01000000 143 144 #define CONFIG_SYS_PCI_CFG_BUS 0x70000000 145 #define CONFIG_SYS_PCI_CFG_PHYS CONFIG_SYS_PCI_CFG_BUS 146 #define CONFIG_SYS_PCI_CFG_SIZE 0x01000000 147 #endif 148 149 #define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */ 150 #define CONFIG_UDP_CHECKSUM 151 152 #define CONFIG_HOSTNAME M548xEVB 153 #define CONFIG_EXTRA_ENV_SETTINGS \ 154 "netdev=eth0\0" \ 155 "loadaddr=10000\0" \ 156 "u-boot=u-boot.bin\0" \ 157 "load=tftp ${loadaddr) ${u-boot}\0" \ 158 "upd=run load; run prog\0" \ 159 "prog=prot off bank 1;" \ 160 "era ff800000 ff82ffff;" \ 161 "cp.b ${loadaddr} ff800000 ${filesize};"\ 162 "save\0" \ 163 "" 164 165 #define CONFIG_PRAM 512 /* 512 KB */ 166 #define CONFIG_SYS_PROMPT "-> " 167 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 168 169 #ifdef CONFIG_CMD_KGDB 170 # define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 171 #else 172 # define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 173 #endif 174 175 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ 176 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 177 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 178 #define CONFIG_SYS_LOAD_ADDR 0x00010000 179 180 #define CONFIG_SYS_HZ 1000 181 #define CONFIG_SYS_CLK CONFIG_SYS_BUSCLK 182 #define CONFIG_SYS_CPU_CLK CONFIG_SYS_CLK * 2 183 184 #define CONFIG_SYS_MBAR 0xF0000000 185 #define CONFIG_SYS_INTSRAM (CONFIG_SYS_MBAR + 0x10000) 186 #define CONFIG_SYS_INTSRAMSZ 0x8000 187 188 /*#define CONFIG_SYS_LATCH_ADDR (CONFIG_SYS_CS1_BASE + 0x80000)*/ 189 190 /* 191 * Low Level Configuration Settings 192 * (address mappings, register initial values, etc.) 193 * You should know what you are doing if you make changes here. 194 */ 195 /*----------------------------------------------------------------------- 196 * Definitions for initial stack pointer and data area (in DPRAM) 197 */ 198 #define CONFIG_SYS_INIT_RAM_ADDR 0xF2000000 199 #define CONFIG_SYS_INIT_RAM_END 0x1000 /* End of used area in internal SRAM */ 200 #define CONFIG_SYS_INIT_RAM_CTRL 0x21 201 #define CONFIG_SYS_INIT_RAM1_ADDR (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_END) 202 #define CONFIG_SYS_INIT_RAM1_END 0x1000 /* End of used area in internal SRAM */ 203 #define CONFIG_SYS_INIT_RAM1_CTRL 0x21 204 #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ 205 #define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) - 0x10) 206 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 207 208 /*----------------------------------------------------------------------- 209 * Start addresses for the final memory configuration 210 * (Set up by the startup code) 211 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 212 */ 213 #define CONFIG_SYS_SDRAM_BASE 0x00000000 214 #define CONFIG_SYS_SDRAM_CFG1 0x73711630 215 #define CONFIG_SYS_SDRAM_CFG2 0x46770000 216 #define CONFIG_SYS_SDRAM_CTRL 0xE10B0000 217 #define CONFIG_SYS_SDRAM_EMOD 0x40010000 218 #define CONFIG_SYS_SDRAM_MODE 0x018D0000 219 #define CONFIG_SYS_SDRAM_DRVSTRENGTH 0x000002AA 220 #ifdef CONFIG_SYS_DRAMSZ1 221 # define CONFIG_SYS_SDRAM_SIZE (CONFIG_SYS_DRAMSZ + CONFIG_SYS_DRAMSZ1) 222 #else 223 # define CONFIG_SYS_SDRAM_SIZE CONFIG_SYS_DRAMSZ 224 #endif 225 226 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE + 0x400 227 #define CONFIG_SYS_MEMTEST_END ((CONFIG_SYS_SDRAM_SIZE - 3) << 20) 228 229 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400) 230 #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ 231 232 #define CONFIG_SYS_BOOTPARAMS_LEN 64*1024 233 #define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ 234 235 /* 236 * For booting Linux, the board info and command line data 237 * have to be in the first 8 MB of memory, since this is 238 * the maximum mapped by the Linux kernel during initialization ?? 239 */ 240 #define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20)) 241 242 /*----------------------------------------------------------------------- 243 * FLASH organization 244 */ 245 #define CONFIG_SYS_FLASH_CFI 246 #ifdef CONFIG_SYS_FLASH_CFI 247 # define CONFIG_SYS_FLASH_BASE (CONFIG_SYS_CS0_BASE) 248 # define CONFIG_FLASH_CFI_DRIVER 1 249 # define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT 250 # define CONFIG_SYS_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ 251 # define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ 252 # define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 253 #ifdef CONFIG_SYS_NOR1SZ 254 # define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ 255 # define CONFIG_SYS_FLASH_SIZE ((CONFIG_SYS_NOR1SZ + CONFIG_SYS_BOOTSZ) << 20) 256 # define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_CS0_BASE, CONFIG_SYS_CS1_BASE } 257 #else 258 # define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ 259 # define CONFIG_SYS_FLASH_SIZE (CONFIG_SYS_BOOTSZ << 20) 260 #endif 261 #endif 262 263 /* Configuration for environment 264 * Environment is embedded in u-boot in the second sector of the flash 265 */ 266 #define CONFIG_ENV_OFFSET 0x2000 267 #define CONFIG_ENV_SECT_SIZE 0x2000 268 #define CONFIG_ENV_IS_IN_FLASH 1 269 270 /*----------------------------------------------------------------------- 271 * Cache Configuration 272 */ 273 #define CONFIG_SYS_CACHELINE_SIZE 16 274 275 /*----------------------------------------------------------------------- 276 * Chipselect bank definitions 277 */ 278 /* 279 * CS0 - NOR Flash 1, 2, 4, or 8MB 280 * CS1 - NOR Flash 281 * CS2 - Available 282 * CS3 - Available 283 * CS4 - Available 284 * CS5 - Available 285 */ 286 #define CONFIG_SYS_CS0_BASE 0xFF800000 287 #define CONFIG_SYS_CS0_MASK (((CONFIG_SYS_BOOTSZ << 20) - 1) & 0xFFFF0001) 288 #define CONFIG_SYS_CS0_CTRL 0x00101980 289 290 #ifdef CONFIG_SYS_NOR1SZ 291 #define CONFIG_SYS_CS1_BASE 0xE0000000 292 #define CONFIG_SYS_CS1_MASK (((CONFIG_SYS_NOR1SZ << 20) - 1) & 0xFFFF0001) 293 #define CONFIG_SYS_CS1_CTRL 0x00101D80 294 #endif 295 296 #endif /* _M5485EVB_H */ 297