1 /* 2 * Configuation settings for the Freescale MCF5485 FireEngine board. 3 * 4 * Copyright (C) 2004-2008 Freescale Semiconductor, Inc. 5 * TsiChung Liew (Tsi-Chung.Liew@freescale.com) 6 * 7 * See file CREDITS for list of people who contributed to this 8 * project. 9 * 10 * This program is free software; you can redistribute it and/or 11 * modify it under the terms of the GNU General Public License as 12 * published by the Free Software Foundation; either version 2 of 13 * the License, or (at your option) any later version. 14 * 15 * This program is distributed in the hope that it will be useful, 16 * but WITHOUT ANY WARRANTY; without even the implied warranty of 17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 18 * GNU General Public License for more details. 19 * 20 * You should have received a copy of the GNU General Public License 21 * along with this program; if not, write to the Free Software 22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 23 * MA 02111-1307 USA 24 */ 25 26 /* 27 * board/config.h - configuration options, board specific 28 */ 29 30 #ifndef _M5485EVB_H 31 #define _M5485EVB_H 32 33 /* 34 * High Level Configuration Options 35 * (easy to change) 36 */ 37 #define CONFIG_MCF547x_8x /* define processor family */ 38 #define CONFIG_M548x /* define processor type */ 39 #define CONFIG_M5485 /* define processor type */ 40 41 #define CONFIG_MCFUART 42 #define CFG_UART_PORT (0) 43 #define CONFIG_BAUDRATE 115200 44 #define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } 45 46 #define CONFIG_HW_WATCHDOG 47 #define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */ 48 49 /* Command line configuration */ 50 #include <config_cmd_default.h> 51 52 #define CONFIG_CMD_CACHE 53 #undef CONFIG_CMD_DATE 54 #define CONFIG_CMD_ELF 55 #define CONFIG_CMD_FLASH 56 #define CONFIG_CMD_I2C 57 #define CONFIG_CMD_MEMORY 58 #define CONFIG_CMD_MISC 59 #define CONFIG_CMD_MII 60 #define CONFIG_CMD_NET 61 #define CONFIG_CMD_PCI 62 #define CONFIG_CMD_PING 63 #define CONFIG_CMD_REGINFO 64 #define CONFIG_CMD_USB 65 66 #define CONFIG_SLTTMR 67 68 #define CONFIG_FSLDMAFEC 69 #ifdef CONFIG_FSLDMAFEC 70 # define CONFIG_NET_MULTI 1 71 # define CONFIG_MII 1 72 # define CONFIG_MII_INIT 1 73 # define CONFIG_HAS_ETH1 74 75 # define CFG_DISCOVER_PHY 76 # define CFG_RX_ETH_BUFFER 32 77 # define CFG_TX_ETH_BUFFER 48 78 # define CFG_FAULT_ECHO_LINK_DOWN 79 80 # define CFG_FEC0_PINMUX 0 81 # define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE 82 # define CFG_FEC1_PINMUX 0 83 # define CFG_FEC1_MIIBASE CFG_FEC0_IOBASE 84 85 # define MCFFEC_TOUT_LOOP 50000 86 /* If CFG_DISCOVER_PHY is not defined - hardcoded */ 87 # ifndef CFG_DISCOVER_PHY 88 # define FECDUPLEX FULL 89 # define FECSPEED _100BASET 90 # else 91 # ifndef CFG_FAULT_ECHO_LINK_DOWN 92 # define CFG_FAULT_ECHO_LINK_DOWN 93 # endif 94 # endif /* CFG_DISCOVER_PHY */ 95 96 # define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 97 # define CONFIG_ETH1ADDR 00:e0:0c:bc:e5:61 98 # define CONFIG_IPADDR 192.162.1.2 99 # define CONFIG_NETMASK 255.255.255.0 100 # define CONFIG_SERVERIP 192.162.1.1 101 # define CONFIG_GATEWAYIP 192.162.1.1 102 # define CONFIG_OVERWRITE_ETHADDR_ONCE 103 104 #endif 105 106 #ifdef CONFIG_CMD_USB 107 # define CONFIG_USB_STORAGE 108 # define CONFIG_DOS_PARTITION 109 # define CONFIG_USB_OHCI_NEW 110 # ifndef CONFIG_CMD_PCI 111 # define CONFIG_CMD_PCI 112 # endif 113 /*# define CONFIG_PCI_OHCI*/ 114 # define CFG_USB_OHCI_REGS_BASE 0x80041000 115 # define CFG_USB_OHCI_MAX_ROOT_PORTS 15 116 # define CFG_USB_OHCI_SLOT_NAME "isp1561" 117 # define CFG_OHCI_SWAP_REG_ACCESS 118 #endif 119 120 /* I2C */ 121 #define CONFIG_FSL_I2C 122 #define CONFIG_HARD_I2C /* I2C with hw support */ 123 #undef CONFIG_SOFT_I2C /* I2C bit-banged */ 124 #define CFG_I2C_SPEED 80000 125 #define CFG_I2C_SLAVE 0x7F 126 #define CFG_I2C_OFFSET 0x00008F00 127 #define CFG_IMMR CFG_MBAR 128 129 /* PCI */ 130 #ifdef CONFIG_CMD_PCI 131 #define CONFIG_PCI 1 132 #define CONFIG_PCI_PNP 1 133 #define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1 134 135 #define CFG_PCI_MEM_BUS 0x80000000 136 #define CFG_PCI_MEM_PHYS CFG_PCI_MEM_BUS 137 #define CFG_PCI_MEM_SIZE 0x10000000 138 139 #define CFG_PCI_IO_BUS 0x71000000 140 #define CFG_PCI_IO_PHYS CFG_PCI_IO_BUS 141 #define CFG_PCI_IO_SIZE 0x01000000 142 143 #define CFG_PCI_CFG_BUS 0x70000000 144 #define CFG_PCI_CFG_PHYS CFG_PCI_CFG_BUS 145 #define CFG_PCI_CFG_SIZE 0x01000000 146 #endif 147 148 #define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */ 149 #define CONFIG_UDP_CHECKSUM 150 151 #define CONFIG_HOSTNAME M548xEVB 152 #define CONFIG_EXTRA_ENV_SETTINGS \ 153 "netdev=eth0\0" \ 154 "loadaddr=10000\0" \ 155 "u-boot=u-boot.bin\0" \ 156 "load=tftp ${loadaddr) ${u-boot}\0" \ 157 "upd=run load; run prog\0" \ 158 "prog=prot off bank 1;" \ 159 "era ff800000 ff82ffff;" \ 160 "cp.b ${loadaddr} ff800000 ${filesize};"\ 161 "save\0" \ 162 "" 163 164 #define CONFIG_PRAM 512 /* 512 KB */ 165 #define CFG_PROMPT "-> " 166 #define CFG_LONGHELP /* undef to save memory */ 167 168 #ifdef CONFIG_CMD_KGDB 169 # define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ 170 #else 171 # define CFG_CBSIZE 256 /* Console I/O Buffer Size */ 172 #endif 173 174 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ 175 #define CFG_MAXARGS 16 /* max number of command args */ 176 #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ 177 #define CFG_LOAD_ADDR 0x00010000 178 179 #define CFG_HZ 1000 180 #define CFG_CLK CFG_BUSCLK 181 #define CFG_CPU_CLK CFG_CLK * 2 182 183 #define CFG_MBAR 0xF0000000 184 #define CFG_INTSRAM (CFG_MBAR + 0x10000) 185 #define CFG_INTSRAMSZ 0x8000 186 187 /*#define CFG_LATCH_ADDR (CFG_CS1_BASE + 0x80000)*/ 188 189 /* 190 * Low Level Configuration Settings 191 * (address mappings, register initial values, etc.) 192 * You should know what you are doing if you make changes here. 193 */ 194 /*----------------------------------------------------------------------- 195 * Definitions for initial stack pointer and data area (in DPRAM) 196 */ 197 #define CFG_INIT_RAM_ADDR 0xF2000000 198 #define CFG_INIT_RAM_END 0x1000 /* End of used area in internal SRAM */ 199 #define CFG_INIT_RAM_CTRL 0x21 200 #define CFG_INIT_RAM1_ADDR (CFG_INIT_RAM_ADDR + CFG_INIT_RAM_END) 201 #define CFG_INIT_RAM1_END 0x1000 /* End of used area in internal SRAM */ 202 #define CFG_INIT_RAM1_CTRL 0x21 203 #define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ 204 #define CFG_GBL_DATA_OFFSET ((CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) - 0x10) 205 #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET 206 207 /*----------------------------------------------------------------------- 208 * Start addresses for the final memory configuration 209 * (Set up by the startup code) 210 * Please note that CFG_SDRAM_BASE _must_ start at 0 211 */ 212 #define CFG_SDRAM_BASE 0x00000000 213 #define CFG_SDRAM_CFG1 0x73711630 214 #define CFG_SDRAM_CFG2 0x46370000 215 #define CFG_SDRAM_CTRL 0xE10B0000 216 #define CFG_SDRAM_EMOD 0x40010000 217 #define CFG_SDRAM_MODE 0x018D0000 218 #define CFG_SDRAM_DRVSTRENGTH 0x000002AA 219 #ifdef CFG_DRAMSZ1 220 # define CFG_SDRAM_SIZE (CFG_DRAMSZ + CFG_DRAMSZ1) 221 #else 222 # define CFG_SDRAM_SIZE CFG_DRAMSZ 223 #endif 224 225 #define CFG_MEMTEST_START CFG_SDRAM_BASE + 0x400 226 #define CFG_MEMTEST_END ((CFG_SDRAM_SIZE - 3) << 20) 227 228 #define CFG_MONITOR_BASE (CFG_FLASH_BASE + 0x400) 229 #define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ 230 231 #define CFG_BOOTPARAMS_LEN 64*1024 232 #define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ 233 234 /* 235 * For booting Linux, the board info and command line data 236 * have to be in the first 8 MB of memory, since this is 237 * the maximum mapped by the Linux kernel during initialization ?? 238 */ 239 #define CFG_BOOTMAPSZ (CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20)) 240 241 /*----------------------------------------------------------------------- 242 * FLASH organization 243 */ 244 #define CFG_FLASH_CFI 245 #ifdef CFG_FLASH_CFI 246 # define CFG_FLASH_BASE (CFG_CS0_BASE) 247 # define CFG_FLASH_CFI_DRIVER 1 248 # define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT 249 # define CFG_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ 250 # define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ 251 # define CFG_FLASH_USE_BUFFER_WRITE 252 #ifdef CFG_NOR1SZ 253 # define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ 254 # define CFG_FLASH_SIZE ((CFG_NOR1SZ + CFG_BOOTSZ) << 20) 255 # define CFG_FLASH_BANKS_LIST { CFG_CS0_BASE, CFG_CS1_BASE } 256 #else 257 # define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ 258 # define CFG_FLASH_SIZE (CFG_BOOTSZ << 20) 259 #endif 260 #endif 261 262 /* Configuration for environment 263 * Environment is embedded in u-boot in the second sector of the flash 264 */ 265 #define CFG_ENV_OFFSET 0x2000 266 #define CFG_ENV_SECT_SIZE 0x2000 267 #define CFG_ENV_IS_IN_FLASH 1 268 #define CFG_ENV_IS_EMBEDDED 1 269 270 /*----------------------------------------------------------------------- 271 * Cache Configuration 272 */ 273 #define CFG_CACHELINE_SIZE 16 274 275 /*----------------------------------------------------------------------- 276 * Chipselect bank definitions 277 */ 278 /* 279 * CS0 - NOR Flash 1, 2, 4, or 8MB 280 * CS1 - NOR Flash 281 * CS2 - Available 282 * CS3 - Available 283 * CS4 - Available 284 * CS5 - Available 285 */ 286 #define CFG_CS0_BASE 0xFF800000 287 #define CFG_CS0_MASK (((CFG_BOOTSZ << 20) - 1) & 0xFFFF0001) 288 #define CFG_CS0_CTRL 0x00101980 289 290 #ifdef CFG_NOR1SZ 291 #define CFG_CS1_BASE 0xF8000000 292 #define CFG_CS1_MASK (((CFG_NOR1SZ << 20) - 1) & 0xFFFF0001) 293 #define CFG_CS1_CTRL 0x00000D80 294 #endif 295 296 #endif /* _M5485EVB_H */ 297