1 /* 2 * Configuation settings for the Freescale MCF5475 board. 3 * 4 * Copyright (C) 2004-2008 Freescale Semiconductor, Inc. 5 * TsiChung Liew (Tsi-Chung.Liew@freescale.com) 6 * 7 * See file CREDITS for list of people who contributed to this 8 * project. 9 * 10 * This program is free software; you can redistribute it and/or 11 * modify it under the terms of the GNU General Public License as 12 * published by the Free Software Foundation; either version 2 of 13 * the License, or (at your option) any later version. 14 * 15 * This program is distributed in the hope that it will be useful, 16 * but WITHOUT ANY WARRANTY; without even the implied warranty of 17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 18 * GNU General Public License for more details. 19 * 20 * You should have received a copy of the GNU General Public License 21 * along with this program; if not, write to the Free Software 22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 23 * MA 02111-1307 USA 24 */ 25 26 /* 27 * board/config.h - configuration options, board specific 28 */ 29 30 #ifndef _M5475EVB_H 31 #define _M5475EVB_H 32 33 /* 34 * High Level Configuration Options 35 * (easy to change) 36 */ 37 #define CONFIG_MCF547x_8x /* define processor family */ 38 #define CONFIG_M547x /* define processor type */ 39 #define CONFIG_M5475 /* define processor type */ 40 41 #define CONFIG_MCFUART 42 #define CONFIG_SYS_UART_PORT (0) 43 #define CONFIG_BAUDRATE 115200 44 45 #define CONFIG_HW_WATCHDOG 46 #define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */ 47 48 /* Command line configuration */ 49 #include <config_cmd_default.h> 50 51 #define CONFIG_CMD_CACHE 52 #undef CONFIG_CMD_DATE 53 #define CONFIG_CMD_ELF 54 #define CONFIG_CMD_FLASH 55 #define CONFIG_CMD_I2C 56 #define CONFIG_CMD_MEMORY 57 #define CONFIG_CMD_MISC 58 #define CONFIG_CMD_MII 59 #define CONFIG_CMD_NET 60 #define CONFIG_CMD_PCI 61 #define CONFIG_CMD_PING 62 #define CONFIG_CMD_REGINFO 63 #define CONFIG_CMD_USB 64 65 #define CONFIG_SLTTMR 66 67 #define CONFIG_FSLDMAFEC 68 #ifdef CONFIG_FSLDMAFEC 69 # define CONFIG_MII 1 70 # define CONFIG_MII_INIT 1 71 # define CONFIG_HAS_ETH1 72 73 # define CONFIG_SYS_DMA_USE_INTSRAM 1 74 # define CONFIG_SYS_DISCOVER_PHY 75 # define CONFIG_SYS_RX_ETH_BUFFER 32 76 # define CONFIG_SYS_TX_ETH_BUFFER 48 77 # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 78 79 # define CONFIG_SYS_FEC0_PINMUX 0 80 # define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE 81 # define CONFIG_SYS_FEC1_PINMUX 0 82 # define CONFIG_SYS_FEC1_MIIBASE CONFIG_SYS_FEC0_IOBASE 83 84 # define MCFFEC_TOUT_LOOP 50000 85 /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */ 86 # ifndef CONFIG_SYS_DISCOVER_PHY 87 # define FECDUPLEX FULL 88 # define FECSPEED _100BASET 89 # else 90 # ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN 91 # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 92 # endif 93 # endif /* CONFIG_SYS_DISCOVER_PHY */ 94 95 # define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 96 # define CONFIG_ETH1ADDR 00:e0:0c:bc:e5:61 97 # define CONFIG_IPADDR 192.162.1.2 98 # define CONFIG_NETMASK 255.255.255.0 99 # define CONFIG_SERVERIP 192.162.1.1 100 # define CONFIG_GATEWAYIP 192.162.1.1 101 # define CONFIG_OVERWRITE_ETHADDR_ONCE 102 103 #endif 104 105 #ifdef CONFIG_CMD_USB 106 # define CONFIG_USB_OHCI_NEW 107 # define CONFIG_USB_STORAGE 108 109 # ifndef CONFIG_CMD_PCI 110 # define CONFIG_CMD_PCI 111 # endif 112 # define CONFIG_PCI_OHCI 113 # define CONFIG_DOS_PARTITION 114 115 # undef CONFIG_SYS_USB_OHCI_BOARD_INIT 116 # undef CONFIG_SYS_USB_OHCI_CPU_INIT 117 # define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15 118 # define CONFIG_SYS_USB_OHCI_SLOT_NAME "isp1561" 119 # define CONFIG_SYS_OHCI_SWAP_REG_ACCESS 120 #endif 121 122 /* I2C */ 123 #define CONFIG_FSL_I2C 124 #define CONFIG_HARD_I2C /* I2C with hw support */ 125 #define CONFIG_SYS_I2C_SPEED 80000 126 #define CONFIG_SYS_I2C_SLAVE 0x7F 127 #define CONFIG_SYS_I2C_OFFSET 0x00008F00 128 #define CONFIG_SYS_IMMR CONFIG_SYS_MBAR 129 130 /* PCI */ 131 #ifdef CONFIG_CMD_PCI 132 #define CONFIG_PCI 1 133 #define CONFIG_PCI_PNP 1 134 #define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1 135 136 #define CONFIG_SYS_PCI_CACHE_LINE_SIZE 8 137 138 #define CONFIG_SYS_PCI_MEM_BUS 0x80000000 139 #define CONFIG_SYS_PCI_MEM_PHYS CONFIG_SYS_PCI_MEM_BUS 140 #define CONFIG_SYS_PCI_MEM_SIZE 0x10000000 141 142 #define CONFIG_SYS_PCI_IO_BUS 0x71000000 143 #define CONFIG_SYS_PCI_IO_PHYS CONFIG_SYS_PCI_IO_BUS 144 #define CONFIG_SYS_PCI_IO_SIZE 0x01000000 145 146 #define CONFIG_SYS_PCI_CFG_BUS 0x70000000 147 #define CONFIG_SYS_PCI_CFG_PHYS CONFIG_SYS_PCI_CFG_BUS 148 #define CONFIG_SYS_PCI_CFG_SIZE 0x01000000 149 #endif 150 151 #define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */ 152 #define CONFIG_UDP_CHECKSUM 153 154 #ifdef CONFIG_MCFFEC 155 # define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 156 # define CONFIG_IPADDR 192.162.1.2 157 # define CONFIG_NETMASK 255.255.255.0 158 # define CONFIG_SERVERIP 192.162.1.1 159 # define CONFIG_GATEWAYIP 192.162.1.1 160 # define CONFIG_OVERWRITE_ETHADDR_ONCE 161 #endif /* FEC_ENET */ 162 163 #define CONFIG_HOSTNAME M547xEVB 164 #define CONFIG_EXTRA_ENV_SETTINGS \ 165 "netdev=eth0\0" \ 166 "loadaddr=10000\0" \ 167 "u-boot=u-boot.bin\0" \ 168 "load=tftp ${loadaddr) ${u-boot}\0" \ 169 "upd=run load; run prog\0" \ 170 "prog=prot off bank 1;" \ 171 "era ff800000 ff83ffff;" \ 172 "cp.b ${loadaddr} ff800000 ${filesize};"\ 173 "save\0" \ 174 "" 175 176 #define CONFIG_PRAM 512 /* 512 KB */ 177 #define CONFIG_SYS_PROMPT "-> " 178 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 179 180 #ifdef CONFIG_CMD_KGDB 181 # define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 182 #else 183 # define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 184 #endif 185 186 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ 187 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 188 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 189 #define CONFIG_SYS_LOAD_ADDR 0x00010000 190 191 #define CONFIG_SYS_HZ 1000 192 #define CONFIG_SYS_CLK CONFIG_SYS_BUSCLK 193 #define CONFIG_SYS_CPU_CLK CONFIG_SYS_CLK * 2 194 195 #define CONFIG_SYS_MBAR 0xF0000000 196 #define CONFIG_SYS_INTSRAM (CONFIG_SYS_MBAR + 0x10000) 197 #define CONFIG_SYS_INTSRAMSZ 0x8000 198 199 /*#define CONFIG_SYS_LATCH_ADDR (CONFIG_SYS_CS1_BASE + 0x80000)*/ 200 201 /* 202 * Low Level Configuration Settings 203 * (address mappings, register initial values, etc.) 204 * You should know what you are doing if you make changes here. 205 */ 206 /*----------------------------------------------------------------------- 207 * Definitions for initial stack pointer and data area (in DPRAM) 208 */ 209 #define CONFIG_SYS_INIT_RAM_ADDR 0xF2000000 210 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in internal SRAM */ 211 #define CONFIG_SYS_INIT_RAM_CTRL 0x21 212 #define CONFIG_SYS_INIT_RAM1_ADDR (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE) 213 #define CONFIG_SYS_INIT_RAM1_END 0x1000 /* End of used area in internal SRAM */ 214 #define CONFIG_SYS_INIT_RAM1_CTRL 0x21 215 #define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 0x10) 216 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 217 218 /*----------------------------------------------------------------------- 219 * Start addresses for the final memory configuration 220 * (Set up by the startup code) 221 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 222 */ 223 #define CONFIG_SYS_SDRAM_BASE 0x00000000 224 #define CONFIG_SYS_SDRAM_CFG1 0x73711630 225 #define CONFIG_SYS_SDRAM_CFG2 0x46770000 226 #define CONFIG_SYS_SDRAM_CTRL 0xE10B0000 227 #define CONFIG_SYS_SDRAM_EMOD 0x40010000 228 #define CONFIG_SYS_SDRAM_MODE 0x018D0000 229 #define CONFIG_SYS_SDRAM_DRVSTRENGTH 0x000002AA 230 #ifdef CONFIG_SYS_DRAMSZ1 231 # define CONFIG_SYS_SDRAM_SIZE (CONFIG_SYS_DRAMSZ + CONFIG_SYS_DRAMSZ1) 232 #else 233 # define CONFIG_SYS_SDRAM_SIZE CONFIG_SYS_DRAMSZ 234 #endif 235 236 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE + 0x400 237 #define CONFIG_SYS_MEMTEST_END ((CONFIG_SYS_SDRAM_SIZE - 3) << 20) 238 239 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400) 240 #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ 241 242 #define CONFIG_SYS_BOOTPARAMS_LEN 64*1024 243 244 /* Reserve 256 kB for malloc() */ 245 #define CONFIG_SYS_MALLOC_LEN (256 << 10) 246 /* 247 * For booting Linux, the board info and command line data 248 * have to be in the first 8 MB of memory, since this is 249 * the maximum mapped by the Linux kernel during initialization ?? 250 */ 251 #define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20)) 252 253 /*----------------------------------------------------------------------- 254 * FLASH organization 255 */ 256 #define CONFIG_SYS_FLASH_CFI 257 #ifdef CONFIG_SYS_FLASH_CFI 258 # define CONFIG_SYS_FLASH_BASE (CONFIG_SYS_CS0_BASE) 259 # define CONFIG_FLASH_CFI_DRIVER 1 260 # define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT 261 # define CONFIG_SYS_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ 262 # define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ 263 # define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 264 #ifdef CONFIG_SYS_NOR1SZ 265 # define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ 266 # define CONFIG_SYS_FLASH_SIZE ((CONFIG_SYS_NOR1SZ + CONFIG_SYS_BOOTSZ) << 20) 267 # define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_CS0_BASE, CONFIG_SYS_CS1_BASE } 268 #else 269 # define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ 270 # define CONFIG_SYS_FLASH_SIZE (CONFIG_SYS_BOOTSZ << 20) 271 #endif 272 #endif 273 274 /* Configuration for environment 275 * Environment is not embedded in u-boot but at offset 0x40000 on the flash. 276 * First time runing may have env crc error warning if there is 277 * no correct environment on the flash. 278 */ 279 #define CONFIG_ENV_OFFSET 0x40000 280 #define CONFIG_ENV_SECT_SIZE 0x10000 281 #define CONFIG_ENV_IS_IN_FLASH 1 282 283 /*----------------------------------------------------------------------- 284 * Cache Configuration 285 */ 286 #define CONFIG_SYS_CACHELINE_SIZE 16 287 288 #define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ 289 CONFIG_SYS_INIT_RAM_SIZE - 8) 290 #define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ 291 CONFIG_SYS_INIT_RAM_SIZE - 4) 292 #define CONFIG_SYS_ICACHE_INV (CF_CACR_BCINVA + CF_CACR_ICINVA + \ 293 CF_CACR_IDCM) 294 #define CONFIG_SYS_DCACHE_INV (CF_CACR_DCINVA) 295 #define CONFIG_SYS_CACHE_ACR2 (CONFIG_SYS_SDRAM_BASE | \ 296 CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ 297 CF_ACR_EN | CF_ACR_SM_ALL) 298 #define CONFIG_SYS_CACHE_ICACR (CF_CACR_BEC | CF_CACR_BCINVA | \ 299 CF_CACR_IEC | CF_CACR_ICINVA) 300 #define CONFIG_SYS_CACHE_DCACR ((CONFIG_SYS_CACHE_ICACR | \ 301 CF_CACR_DEC | CF_CACR_DDCM_P | \ 302 CF_CACR_DCINVA) & ~CF_CACR_ICINVA) 303 304 /*----------------------------------------------------------------------- 305 * Chipselect bank definitions 306 */ 307 /* 308 * CS0 - NOR Flash 1, 2, 4, or 8MB 309 * CS1 - NOR Flash 310 * CS2 - Available 311 * CS3 - Available 312 * CS4 - Available 313 * CS5 - Available 314 */ 315 #define CONFIG_SYS_CS0_BASE 0xFF800000 316 #define CONFIG_SYS_CS0_MASK (((CONFIG_SYS_BOOTSZ << 20) - 1) & 0xFFFF0001) 317 #define CONFIG_SYS_CS0_CTRL 0x00101980 318 319 #ifdef CONFIG_SYS_NOR1SZ 320 #define CONFIG_SYS_CS1_BASE 0xE0000000 321 #define CONFIG_SYS_CS1_MASK (((CONFIG_SYS_NOR1SZ << 20) - 1) & 0xFFFF0001) 322 #define CONFIG_SYS_CS1_CTRL 0x00101D80 323 #endif 324 325 #endif /* _M5475EVB_H */ 326