1 /* 2 * Configuation settings for the Freescale MCF5475 board. 3 * 4 * Copyright (C) 2004-2008 Freescale Semiconductor, Inc. 5 * TsiChung Liew (Tsi-Chung.Liew@freescale.com) 6 * 7 * See file CREDITS for list of people who contributed to this 8 * project. 9 * 10 * This program is free software; you can redistribute it and/or 11 * modify it under the terms of the GNU General Public License as 12 * published by the Free Software Foundation; either version 2 of 13 * the License, or (at your option) any later version. 14 * 15 * This program is distributed in the hope that it will be useful, 16 * but WITHOUT ANY WARRANTY; without even the implied warranty of 17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 18 * GNU General Public License for more details. 19 * 20 * You should have received a copy of the GNU General Public License 21 * along with this program; if not, write to the Free Software 22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 23 * MA 02111-1307 USA 24 */ 25 26 /* 27 * board/config.h - configuration options, board specific 28 */ 29 30 #ifndef _M5475EVB_H 31 #define _M5475EVB_H 32 33 /* 34 * High Level Configuration Options 35 * (easy to change) 36 */ 37 #define CONFIG_MCF547x_8x /* define processor family */ 38 #define CONFIG_M547x /* define processor type */ 39 #define CONFIG_M5475 /* define processor type */ 40 41 #define CONFIG_MCFUART 42 #define CONFIG_SYS_UART_PORT (0) 43 #define CONFIG_BAUDRATE 115200 44 45 #define CONFIG_HW_WATCHDOG 46 #define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */ 47 48 /* Command line configuration */ 49 #include <config_cmd_default.h> 50 51 #define CONFIG_CMD_CACHE 52 #undef CONFIG_CMD_DATE 53 #define CONFIG_CMD_ELF 54 #define CONFIG_CMD_FLASH 55 #define CONFIG_CMD_I2C 56 #define CONFIG_CMD_MEMORY 57 #define CONFIG_CMD_MISC 58 #define CONFIG_CMD_MII 59 #define CONFIG_CMD_NET 60 #define CONFIG_CMD_PCI 61 #define CONFIG_CMD_PING 62 #define CONFIG_CMD_REGINFO 63 #define CONFIG_CMD_USB 64 65 #define CONFIG_SLTTMR 66 67 #define CONFIG_FSLDMAFEC 68 #ifdef CONFIG_FSLDMAFEC 69 # define CONFIG_MII 1 70 # define CONFIG_MII_INIT 1 71 # define CONFIG_HAS_ETH1 72 73 # define CONFIG_SYS_DMA_USE_INTSRAM 1 74 # define CONFIG_SYS_DISCOVER_PHY 75 # define CONFIG_SYS_RX_ETH_BUFFER 32 76 # define CONFIG_SYS_TX_ETH_BUFFER 48 77 # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 78 79 # define CONFIG_SYS_FEC0_PINMUX 0 80 # define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE 81 # define CONFIG_SYS_FEC1_PINMUX 0 82 # define CONFIG_SYS_FEC1_MIIBASE CONFIG_SYS_FEC0_IOBASE 83 84 # define MCFFEC_TOUT_LOOP 50000 85 /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */ 86 # ifndef CONFIG_SYS_DISCOVER_PHY 87 # define FECDUPLEX FULL 88 # define FECSPEED _100BASET 89 # else 90 # ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN 91 # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 92 # endif 93 # endif /* CONFIG_SYS_DISCOVER_PHY */ 94 95 # define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 96 # define CONFIG_ETH1ADDR 00:e0:0c:bc:e5:61 97 # define CONFIG_IPADDR 192.162.1.2 98 # define CONFIG_NETMASK 255.255.255.0 99 # define CONFIG_SERVERIP 192.162.1.1 100 # define CONFIG_GATEWAYIP 192.162.1.1 101 # define CONFIG_OVERWRITE_ETHADDR_ONCE 102 103 #endif 104 105 #ifdef CONFIG_CMD_USB 106 # define CONFIG_USB_OHCI_NEW 107 # define CONFIG_USB_STORAGE 108 109 # ifndef CONFIG_CMD_PCI 110 # define CONFIG_CMD_PCI 111 # endif 112 # define CONFIG_PCI_OHCI 113 # define CONFIG_DOS_PARTITION 114 115 # undef CONFIG_SYS_USB_OHCI_BOARD_INIT 116 # undef CONFIG_SYS_USB_OHCI_CPU_INIT 117 # define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15 118 # define CONFIG_SYS_USB_OHCI_SLOT_NAME "isp1561" 119 # define CONFIG_SYS_OHCI_SWAP_REG_ACCESS 120 #endif 121 122 /* I2C */ 123 #define CONFIG_FSL_I2C 124 #define CONFIG_HARD_I2C /* I2C with hw support */ 125 #undef CONFIG_SOFT_I2C /* I2C bit-banged */ 126 #define CONFIG_SYS_I2C_SPEED 80000 127 #define CONFIG_SYS_I2C_SLAVE 0x7F 128 #define CONFIG_SYS_I2C_OFFSET 0x00008F00 129 #define CONFIG_SYS_IMMR CONFIG_SYS_MBAR 130 131 /* PCI */ 132 #ifdef CONFIG_CMD_PCI 133 #define CONFIG_PCI 1 134 #define CONFIG_PCI_PNP 1 135 #define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1 136 137 #define CONFIG_SYS_PCI_CACHE_LINE_SIZE 8 138 139 #define CONFIG_SYS_PCI_MEM_BUS 0x80000000 140 #define CONFIG_SYS_PCI_MEM_PHYS CONFIG_SYS_PCI_MEM_BUS 141 #define CONFIG_SYS_PCI_MEM_SIZE 0x10000000 142 143 #define CONFIG_SYS_PCI_IO_BUS 0x71000000 144 #define CONFIG_SYS_PCI_IO_PHYS CONFIG_SYS_PCI_IO_BUS 145 #define CONFIG_SYS_PCI_IO_SIZE 0x01000000 146 147 #define CONFIG_SYS_PCI_CFG_BUS 0x70000000 148 #define CONFIG_SYS_PCI_CFG_PHYS CONFIG_SYS_PCI_CFG_BUS 149 #define CONFIG_SYS_PCI_CFG_SIZE 0x01000000 150 #endif 151 152 #define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */ 153 #define CONFIG_UDP_CHECKSUM 154 155 #ifdef CONFIG_MCFFEC 156 # define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 157 # define CONFIG_IPADDR 192.162.1.2 158 # define CONFIG_NETMASK 255.255.255.0 159 # define CONFIG_SERVERIP 192.162.1.1 160 # define CONFIG_GATEWAYIP 192.162.1.1 161 # define CONFIG_OVERWRITE_ETHADDR_ONCE 162 #endif /* FEC_ENET */ 163 164 #define CONFIG_HOSTNAME M547xEVB 165 #define CONFIG_EXTRA_ENV_SETTINGS \ 166 "netdev=eth0\0" \ 167 "loadaddr=10000\0" \ 168 "u-boot=u-boot.bin\0" \ 169 "load=tftp ${loadaddr) ${u-boot}\0" \ 170 "upd=run load; run prog\0" \ 171 "prog=prot off bank 1;" \ 172 "era ff800000 ff83ffff;" \ 173 "cp.b ${loadaddr} ff800000 ${filesize};"\ 174 "save\0" \ 175 "" 176 177 #define CONFIG_PRAM 512 /* 512 KB */ 178 #define CONFIG_SYS_PROMPT "-> " 179 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 180 181 #ifdef CONFIG_CMD_KGDB 182 # define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 183 #else 184 # define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 185 #endif 186 187 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ 188 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 189 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 190 #define CONFIG_SYS_LOAD_ADDR 0x00010000 191 192 #define CONFIG_SYS_HZ 1000 193 #define CONFIG_SYS_CLK CONFIG_SYS_BUSCLK 194 #define CONFIG_SYS_CPU_CLK CONFIG_SYS_CLK * 2 195 196 #define CONFIG_SYS_MBAR 0xF0000000 197 #define CONFIG_SYS_INTSRAM (CONFIG_SYS_MBAR + 0x10000) 198 #define CONFIG_SYS_INTSRAMSZ 0x8000 199 200 /*#define CONFIG_SYS_LATCH_ADDR (CONFIG_SYS_CS1_BASE + 0x80000)*/ 201 202 /* 203 * Low Level Configuration Settings 204 * (address mappings, register initial values, etc.) 205 * You should know what you are doing if you make changes here. 206 */ 207 /*----------------------------------------------------------------------- 208 * Definitions for initial stack pointer and data area (in DPRAM) 209 */ 210 #define CONFIG_SYS_INIT_RAM_ADDR 0xF2000000 211 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in internal SRAM */ 212 #define CONFIG_SYS_INIT_RAM_CTRL 0x21 213 #define CONFIG_SYS_INIT_RAM1_ADDR (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE) 214 #define CONFIG_SYS_INIT_RAM1_END 0x1000 /* End of used area in internal SRAM */ 215 #define CONFIG_SYS_INIT_RAM1_CTRL 0x21 216 #define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 0x10) 217 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 218 219 /*----------------------------------------------------------------------- 220 * Start addresses for the final memory configuration 221 * (Set up by the startup code) 222 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 223 */ 224 #define CONFIG_SYS_SDRAM_BASE 0x00000000 225 #define CONFIG_SYS_SDRAM_CFG1 0x73711630 226 #define CONFIG_SYS_SDRAM_CFG2 0x46770000 227 #define CONFIG_SYS_SDRAM_CTRL 0xE10B0000 228 #define CONFIG_SYS_SDRAM_EMOD 0x40010000 229 #define CONFIG_SYS_SDRAM_MODE 0x018D0000 230 #define CONFIG_SYS_SDRAM_DRVSTRENGTH 0x000002AA 231 #ifdef CONFIG_SYS_DRAMSZ1 232 # define CONFIG_SYS_SDRAM_SIZE (CONFIG_SYS_DRAMSZ + CONFIG_SYS_DRAMSZ1) 233 #else 234 # define CONFIG_SYS_SDRAM_SIZE CONFIG_SYS_DRAMSZ 235 #endif 236 237 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE + 0x400 238 #define CONFIG_SYS_MEMTEST_END ((CONFIG_SYS_SDRAM_SIZE - 3) << 20) 239 240 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400) 241 #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ 242 243 #define CONFIG_SYS_BOOTPARAMS_LEN 64*1024 244 245 /* Reserve 256 kB for malloc() */ 246 #define CONFIG_SYS_MALLOC_LEN (256 << 10) 247 /* 248 * For booting Linux, the board info and command line data 249 * have to be in the first 8 MB of memory, since this is 250 * the maximum mapped by the Linux kernel during initialization ?? 251 */ 252 #define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20)) 253 254 /*----------------------------------------------------------------------- 255 * FLASH organization 256 */ 257 #define CONFIG_SYS_FLASH_CFI 258 #ifdef CONFIG_SYS_FLASH_CFI 259 # define CONFIG_SYS_FLASH_BASE (CONFIG_SYS_CS0_BASE) 260 # define CONFIG_FLASH_CFI_DRIVER 1 261 # define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT 262 # define CONFIG_SYS_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ 263 # define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ 264 # define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 265 #ifdef CONFIG_SYS_NOR1SZ 266 # define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ 267 # define CONFIG_SYS_FLASH_SIZE ((CONFIG_SYS_NOR1SZ + CONFIG_SYS_BOOTSZ) << 20) 268 # define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_CS0_BASE, CONFIG_SYS_CS1_BASE } 269 #else 270 # define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ 271 # define CONFIG_SYS_FLASH_SIZE (CONFIG_SYS_BOOTSZ << 20) 272 #endif 273 #endif 274 275 /* Configuration for environment 276 * Environment is not embedded in u-boot but at offset 0x40000 on the flash. 277 * First time runing may have env crc error warning if there is 278 * no correct environment on the flash. 279 */ 280 #define CONFIG_ENV_OFFSET 0x40000 281 #define CONFIG_ENV_SECT_SIZE 0x10000 282 #define CONFIG_ENV_IS_IN_FLASH 1 283 284 /*----------------------------------------------------------------------- 285 * Cache Configuration 286 */ 287 #define CONFIG_SYS_CACHELINE_SIZE 16 288 289 #define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ 290 CONFIG_SYS_INIT_RAM_SIZE - 8) 291 #define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ 292 CONFIG_SYS_INIT_RAM_SIZE - 4) 293 #define CONFIG_SYS_ICACHE_INV (CF_CACR_BCINVA + CF_CACR_ICINVA + \ 294 CF_CACR_IDCM) 295 #define CONFIG_SYS_DCACHE_INV (CF_CACR_DCINVA) 296 #define CONFIG_SYS_CACHE_ACR2 (CONFIG_SYS_SDRAM_BASE | \ 297 CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ 298 CF_ACR_EN | CF_ACR_SM_ALL) 299 #define CONFIG_SYS_CACHE_ICACR (CF_CACR_BEC | CF_CACR_BCINVA | \ 300 CF_CACR_IEC | CF_CACR_ICINVA) 301 #define CONFIG_SYS_CACHE_DCACR ((CONFIG_SYS_CACHE_ICACR | \ 302 CF_CACR_DEC | CF_CACR_DDCM_P | \ 303 CF_CACR_DCINVA) & ~CF_CACR_ICINVA) 304 305 /*----------------------------------------------------------------------- 306 * Chipselect bank definitions 307 */ 308 /* 309 * CS0 - NOR Flash 1, 2, 4, or 8MB 310 * CS1 - NOR Flash 311 * CS2 - Available 312 * CS3 - Available 313 * CS4 - Available 314 * CS5 - Available 315 */ 316 #define CONFIG_SYS_CS0_BASE 0xFF800000 317 #define CONFIG_SYS_CS0_MASK (((CONFIG_SYS_BOOTSZ << 20) - 1) & 0xFFFF0001) 318 #define CONFIG_SYS_CS0_CTRL 0x00101980 319 320 #ifdef CONFIG_SYS_NOR1SZ 321 #define CONFIG_SYS_CS1_BASE 0xE0000000 322 #define CONFIG_SYS_CS1_MASK (((CONFIG_SYS_NOR1SZ << 20) - 1) & 0xFFFF0001) 323 #define CONFIG_SYS_CS1_CTRL 0x00101D80 324 #endif 325 326 #endif /* _M5475EVB_H */ 327