1 /* 2 * Configuation settings for the Freescale MCF5475 board. 3 * 4 * Copyright (C) 2004-2008 Freescale Semiconductor, Inc. 5 * TsiChung Liew (Tsi-Chung.Liew@freescale.com) 6 * 7 * See file CREDITS for list of people who contributed to this 8 * project. 9 * 10 * This program is free software; you can redistribute it and/or 11 * modify it under the terms of the GNU General Public License as 12 * published by the Free Software Foundation; either version 2 of 13 * the License, or (at your option) any later version. 14 * 15 * This program is distributed in the hope that it will be useful, 16 * but WITHOUT ANY WARRANTY; without even the implied warranty of 17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 18 * GNU General Public License for more details. 19 * 20 * You should have received a copy of the GNU General Public License 21 * along with this program; if not, write to the Free Software 22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 23 * MA 02111-1307 USA 24 */ 25 26 /* 27 * board/config.h - configuration options, board specific 28 */ 29 30 #ifndef _M5475EVB_H 31 #define _M5475EVB_H 32 33 /* 34 * High Level Configuration Options 35 * (easy to change) 36 */ 37 #define CONFIG_MCF547x_8x /* define processor family */ 38 #define CONFIG_M547x /* define processor type */ 39 #define CONFIG_M5475 /* define processor type */ 40 41 #define CONFIG_MCFUART 42 #define CFG_UART_PORT (0) 43 #define CONFIG_BAUDRATE 115200 44 #define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } 45 46 #define CONFIG_HW_WATCHDOG 47 #define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */ 48 49 /* Command line configuration */ 50 #include <config_cmd_default.h> 51 52 #define CONFIG_CMD_CACHE 53 #undef CONFIG_CMD_DATE 54 #define CONFIG_CMD_ELF 55 #define CONFIG_CMD_FLASH 56 #define CONFIG_CMD_I2C 57 #define CONFIG_CMD_MEMORY 58 #define CONFIG_CMD_MISC 59 #define CONFIG_CMD_MII 60 #define CONFIG_CMD_NET 61 #define CONFIG_CMD_PCI 62 #define CONFIG_CMD_PING 63 #define CONFIG_CMD_REGINFO 64 #define CONFIG_CMD_USB 65 66 #define CONFIG_SLTTMR 67 68 #define CONFIG_FSLDMAFEC 69 #ifdef CONFIG_FSLDMAFEC 70 # define CONFIG_NET_MULTI 1 71 # define CONFIG_MII 1 72 # define CONFIG_MII_INIT 1 73 # define CONFIG_HAS_ETH1 74 75 # define CFG_DMA_USE_INTSRAM 1 76 # define CFG_DISCOVER_PHY 77 # define CFG_RX_ETH_BUFFER 32 78 # define CFG_TX_ETH_BUFFER 48 79 # define CFG_FAULT_ECHO_LINK_DOWN 80 81 # define CFG_FEC0_PINMUX 0 82 # define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE 83 # define CFG_FEC1_PINMUX 0 84 # define CFG_FEC1_MIIBASE CFG_FEC0_IOBASE 85 86 # define MCFFEC_TOUT_LOOP 50000 87 /* If CFG_DISCOVER_PHY is not defined - hardcoded */ 88 # ifndef CFG_DISCOVER_PHY 89 # define FECDUPLEX FULL 90 # define FECSPEED _100BASET 91 # else 92 # ifndef CFG_FAULT_ECHO_LINK_DOWN 93 # define CFG_FAULT_ECHO_LINK_DOWN 94 # endif 95 # endif /* CFG_DISCOVER_PHY */ 96 97 # define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 98 # define CONFIG_ETH1ADDR 00:e0:0c:bc:e5:61 99 # define CONFIG_IPADDR 192.162.1.2 100 # define CONFIG_NETMASK 255.255.255.0 101 # define CONFIG_SERVERIP 192.162.1.1 102 # define CONFIG_GATEWAYIP 192.162.1.1 103 # define CONFIG_OVERWRITE_ETHADDR_ONCE 104 105 #endif 106 107 #ifdef CONFIG_CMD_USB 108 # define CONFIG_USB_OHCI_NEW 109 # define CONFIG_USB_STORAGE 110 111 # ifndef CONFIG_CMD_PCI 112 # define CONFIG_CMD_PCI 113 # endif 114 # define CONFIG_PCI_OHCI 115 # define CONFIG_DOS_PARTITION 116 117 # undef CFG_USB_OHCI_BOARD_INIT 118 # undef CFG_USB_OHCI_CPU_INIT 119 # define CFG_USB_OHCI_MAX_ROOT_PORTS 15 120 # define CFG_USB_OHCI_SLOT_NAME "isp1561" 121 # define CFG_OHCI_SWAP_REG_ACCESS 122 #endif 123 124 /* I2C */ 125 #define CONFIG_FSL_I2C 126 #define CONFIG_HARD_I2C /* I2C with hw support */ 127 #undef CONFIG_SOFT_I2C /* I2C bit-banged */ 128 #define CFG_I2C_SPEED 80000 129 #define CFG_I2C_SLAVE 0x7F 130 #define CFG_I2C_OFFSET 0x00008F00 131 #define CFG_IMMR CFG_MBAR 132 133 /* PCI */ 134 #ifdef CONFIG_CMD_PCI 135 #define CONFIG_PCI 1 136 #define CONFIG_PCI_PNP 1 137 #define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1 138 139 #define CFG_PCI_CACHE_LINE_SIZE 8 140 141 #define CFG_PCI_MEM_BUS 0x80000000 142 #define CFG_PCI_MEM_PHYS CFG_PCI_MEM_BUS 143 #define CFG_PCI_MEM_SIZE 0x10000000 144 145 #define CFG_PCI_IO_BUS 0x71000000 146 #define CFG_PCI_IO_PHYS CFG_PCI_IO_BUS 147 #define CFG_PCI_IO_SIZE 0x01000000 148 149 #define CFG_PCI_CFG_BUS 0x70000000 150 #define CFG_PCI_CFG_PHYS CFG_PCI_CFG_BUS 151 #define CFG_PCI_CFG_SIZE 0x01000000 152 #endif 153 154 #define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */ 155 #define CONFIG_UDP_CHECKSUM 156 157 #ifdef CONFIG_MCFFEC 158 # define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 159 # define CONFIG_IPADDR 192.162.1.2 160 # define CONFIG_NETMASK 255.255.255.0 161 # define CONFIG_SERVERIP 192.162.1.1 162 # define CONFIG_GATEWAYIP 192.162.1.1 163 # define CONFIG_OVERWRITE_ETHADDR_ONCE 164 #endif /* FEC_ENET */ 165 166 #define CONFIG_HOSTNAME M547xEVB 167 #define CONFIG_EXTRA_ENV_SETTINGS \ 168 "netdev=eth0\0" \ 169 "loadaddr=10000\0" \ 170 "u-boot=u-boot.bin\0" \ 171 "load=tftp ${loadaddr) ${u-boot}\0" \ 172 "upd=run load; run prog\0" \ 173 "prog=prot off bank 1;" \ 174 "era ff800000 ff82ffff;" \ 175 "cp.b ${loadaddr} ff800000 ${filesize};"\ 176 "save\0" \ 177 "" 178 179 #define CONFIG_PRAM 512 /* 512 KB */ 180 #define CFG_PROMPT "-> " 181 #define CFG_LONGHELP /* undef to save memory */ 182 183 #ifdef CONFIG_CMD_KGDB 184 # define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ 185 #else 186 # define CFG_CBSIZE 256 /* Console I/O Buffer Size */ 187 #endif 188 189 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ 190 #define CFG_MAXARGS 16 /* max number of command args */ 191 #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ 192 #define CFG_LOAD_ADDR 0x00010000 193 194 #define CFG_HZ 1000 195 #define CFG_CLK CFG_BUSCLK 196 #define CFG_CPU_CLK CFG_CLK * 2 197 198 #define CFG_MBAR 0xF0000000 199 #define CFG_INTSRAM (CFG_MBAR + 0x10000) 200 #define CFG_INTSRAMSZ 0x8000 201 202 /*#define CFG_LATCH_ADDR (CFG_CS1_BASE + 0x80000)*/ 203 204 /* 205 * Low Level Configuration Settings 206 * (address mappings, register initial values, etc.) 207 * You should know what you are doing if you make changes here. 208 */ 209 /*----------------------------------------------------------------------- 210 * Definitions for initial stack pointer and data area (in DPRAM) 211 */ 212 #define CFG_INIT_RAM_ADDR 0xF2000000 213 #define CFG_INIT_RAM_END 0x1000 /* End of used area in internal SRAM */ 214 #define CFG_INIT_RAM_CTRL 0x21 215 #define CFG_INIT_RAM1_ADDR (CFG_INIT_RAM_ADDR + CFG_INIT_RAM_END) 216 #define CFG_INIT_RAM1_END 0x1000 /* End of used area in internal SRAM */ 217 #define CFG_INIT_RAM1_CTRL 0x21 218 #define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ 219 #define CFG_GBL_DATA_OFFSET ((CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) - 0x10) 220 #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET 221 222 /*----------------------------------------------------------------------- 223 * Start addresses for the final memory configuration 224 * (Set up by the startup code) 225 * Please note that CFG_SDRAM_BASE _must_ start at 0 226 */ 227 #define CFG_SDRAM_BASE 0x00000000 228 #define CFG_SDRAM_CFG1 0x73711630 229 #define CFG_SDRAM_CFG2 0x46770000 230 #define CFG_SDRAM_CTRL 0xE10B0000 231 #define CFG_SDRAM_EMOD 0x40010000 232 #define CFG_SDRAM_MODE 0x018D0000 233 #define CFG_SDRAM_DRVSTRENGTH 0x000002AA 234 #ifdef CFG_DRAMSZ1 235 # define CFG_SDRAM_SIZE (CFG_DRAMSZ + CFG_DRAMSZ1) 236 #else 237 # define CFG_SDRAM_SIZE CFG_DRAMSZ 238 #endif 239 240 #define CFG_MEMTEST_START CFG_SDRAM_BASE + 0x400 241 #define CFG_MEMTEST_END ((CFG_SDRAM_SIZE - 3) << 20) 242 243 #define CFG_MONITOR_BASE (CFG_FLASH_BASE + 0x400) 244 #define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ 245 246 #define CFG_BOOTPARAMS_LEN 64*1024 247 #define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ 248 249 /* 250 * For booting Linux, the board info and command line data 251 * have to be in the first 8 MB of memory, since this is 252 * the maximum mapped by the Linux kernel during initialization ?? 253 */ 254 #define CFG_BOOTMAPSZ (CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20)) 255 256 /*----------------------------------------------------------------------- 257 * FLASH organization 258 */ 259 #define CFG_FLASH_CFI 260 #ifdef CFG_FLASH_CFI 261 # define CFG_FLASH_BASE (CFG_CS0_BASE) 262 # define CONFIG_FLASH_CFI_DRIVER 1 263 # define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT 264 # define CFG_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ 265 # define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ 266 # define CFG_FLASH_USE_BUFFER_WRITE 267 #ifdef CFG_NOR1SZ 268 # define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ 269 # define CFG_FLASH_SIZE ((CFG_NOR1SZ + CFG_BOOTSZ) << 20) 270 # define CFG_FLASH_BANKS_LIST { CFG_CS0_BASE, CFG_CS1_BASE } 271 #else 272 # define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ 273 # define CFG_FLASH_SIZE (CFG_BOOTSZ << 20) 274 #endif 275 #endif 276 277 /* Configuration for environment 278 * Environment is embedded in u-boot in the second sector of the flash 279 */ 280 #define CONFIG_ENV_OFFSET 0x2000 281 #define CONFIG_ENV_SECT_SIZE 0x2000 282 #define CONFIG_ENV_IS_IN_FLASH 1 283 #define CONFIG_ENV_IS_EMBEDDED 1 284 285 /*----------------------------------------------------------------------- 286 * Cache Configuration 287 */ 288 #define CFG_CACHELINE_SIZE 16 289 290 /*----------------------------------------------------------------------- 291 * Chipselect bank definitions 292 */ 293 /* 294 * CS0 - NOR Flash 1, 2, 4, or 8MB 295 * CS1 - NOR Flash 296 * CS2 - Available 297 * CS3 - Available 298 * CS4 - Available 299 * CS5 - Available 300 */ 301 #define CFG_CS0_BASE 0xFF800000 302 #define CFG_CS0_MASK (((CFG_BOOTSZ << 20) - 1) & 0xFFFF0001) 303 #define CFG_CS0_CTRL 0x00101980 304 305 #ifdef CFG_NOR1SZ 306 #define CFG_CS1_BASE 0xE0000000 307 #define CFG_CS1_MASK (((CFG_NOR1SZ << 20) - 1) & 0xFFFF0001) 308 #define CFG_CS1_CTRL 0x00101D80 309 #endif 310 311 #endif /* _M5475EVB_H */ 312