1 /* 2 * Configuation settings for the Freescale MCF54455 EVB board. 3 * 4 * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. 5 * TsiChung Liew (Tsi-Chung.Liew@freescale.com) 6 * 7 * See file CREDITS for list of people who contributed to this 8 * project. 9 * 10 * This program is free software; you can redistribute it and/or 11 * modify it under the terms of the GNU General Public License as 12 * published by the Free Software Foundation; either version 2 of 13 * the License, or (at your option) any later version. 14 * 15 * This program is distributed in the hope that it will be useful, 16 * but WITHOUT ANY WARRANTY; without even the implied warranty of 17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 18 * GNU General Public License for more details. 19 * 20 * You should have received a copy of the GNU General Public License 21 * along with this program; if not, write to the Free Software 22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 23 * MA 02111-1307 USA 24 */ 25 26 /* 27 * board/config.h - configuration options, board specific 28 */ 29 30 #ifndef _M54455EVB_H 31 #define _M54455EVB_H 32 33 /* 34 * High Level Configuration Options 35 * (easy to change) 36 */ 37 #define CONFIG_MCF5445x /* define processor family */ 38 #define CONFIG_M54455 /* define processor type */ 39 #define CONFIG_M54455EVB /* M54455EVB board */ 40 41 #define CONFIG_MCFUART 42 #define CONFIG_SYS_UART_PORT (0) 43 #define CONFIG_BAUDRATE 115200 44 45 #undef CONFIG_WATCHDOG 46 47 #define CONFIG_TIMESTAMP /* Print image info with timestamp */ 48 49 /* 50 * BOOTP options 51 */ 52 #define CONFIG_BOOTP_BOOTFILESIZE 53 #define CONFIG_BOOTP_BOOTPATH 54 #define CONFIG_BOOTP_GATEWAY 55 #define CONFIG_BOOTP_HOSTNAME 56 57 /* Command line configuration */ 58 #include <config_cmd_default.h> 59 60 #define CONFIG_CMD_BOOTD 61 #define CONFIG_CMD_CACHE 62 #define CONFIG_CMD_DATE 63 #define CONFIG_CMD_DHCP 64 #define CONFIG_CMD_ELF 65 #define CONFIG_CMD_EXT2 66 #define CONFIG_CMD_FAT 67 #define CONFIG_CMD_FLASH 68 #define CONFIG_CMD_I2C 69 #define CONFIG_CMD_IDE 70 #define CONFIG_CMD_JFFS2 71 #define CONFIG_CMD_MEMORY 72 #define CONFIG_CMD_MISC 73 #define CONFIG_CMD_MII 74 #define CONFIG_CMD_NET 75 #undef CONFIG_CMD_PCI 76 #define CONFIG_CMD_PING 77 #define CONFIG_CMD_REGINFO 78 #define CONFIG_CMD_SPI 79 #define CONFIG_CMD_SF 80 81 #undef CONFIG_CMD_LOADB 82 #undef CONFIG_CMD_LOADS 83 84 /* Network configuration */ 85 #define CONFIG_MCFFEC 86 #ifdef CONFIG_MCFFEC 87 # define CONFIG_MII 1 88 # define CONFIG_MII_INIT 1 89 # define CONFIG_SYS_DISCOVER_PHY 90 # define CONFIG_SYS_RX_ETH_BUFFER 8 91 # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 92 93 # define CONFIG_SYS_FEC0_PINMUX 0 94 # define CONFIG_SYS_FEC1_PINMUX 0 95 # define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE 96 # define CONFIG_SYS_FEC1_MIIBASE CONFIG_SYS_FEC0_IOBASE 97 # define MCFFEC_TOUT_LOOP 50000 98 # define CONFIG_HAS_ETH1 99 100 # define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */ 101 # define CONFIG_BOOTARGS "root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=physmap-flash.0:5M(kernel)ro,-(jffs2)" 102 # define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 103 # define CONFIG_ETH1ADDR 00:e0:0c:bc:e5:61 104 # define CONFIG_ETHPRIME "FEC0" 105 # define CONFIG_IPADDR 192.162.1.2 106 # define CONFIG_NETMASK 255.255.255.0 107 # define CONFIG_SERVERIP 192.162.1.1 108 # define CONFIG_GATEWAYIP 192.162.1.1 109 # define CONFIG_OVERWRITE_ETHADDR_ONCE 110 111 /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */ 112 # ifndef CONFIG_SYS_DISCOVER_PHY 113 # define FECDUPLEX FULL 114 # define FECSPEED _100BASET 115 # else 116 # ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN 117 # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 118 # endif 119 # endif /* CONFIG_SYS_DISCOVER_PHY */ 120 #endif 121 122 #define CONFIG_HOSTNAME M54455EVB 123 #ifdef CONFIG_SYS_STMICRO_BOOT 124 /* ST Micro serial flash */ 125 #define CONFIG_SYS_LOAD_ADDR2 0x40010013 126 #define CONFIG_EXTRA_ENV_SETTINGS \ 127 "netdev=eth0\0" \ 128 "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0" \ 129 "loadaddr=0x40010000\0" \ 130 "sbfhdr=sbfhdr.bin\0" \ 131 "uboot=u-boot.bin\0" \ 132 "load=tftp ${loadaddr} ${sbfhdr};" \ 133 "tftp " __stringify(CONFIG_SYS_LOAD_ADDR2) " ${uboot} \0" \ 134 "upd=run load; run prog\0" \ 135 "prog=sf probe 0:1 1000000 3;" \ 136 "sf erase 0 30000;" \ 137 "sf write ${loadaddr} 0 0x30000;" \ 138 "save\0" \ 139 "" 140 #else 141 /* Atmel and Intel */ 142 #ifdef CONFIG_SYS_ATMEL_BOOT 143 # define CONFIG_SYS_UBOOT_END 0x0403FFFF 144 #elif defined(CONFIG_SYS_INTEL_BOOT) 145 # define CONFIG_SYS_UBOOT_END 0x3FFFF 146 #endif 147 #define CONFIG_EXTRA_ENV_SETTINGS \ 148 "netdev=eth0\0" \ 149 "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0" \ 150 "loadaddr=0x40010000\0" \ 151 "uboot=u-boot.bin\0" \ 152 "load=tftp ${loadaddr} ${uboot}\0" \ 153 "upd=run load; run prog\0" \ 154 "prog=prot off " __stringify(CONFIG_SYS_FLASH_BASE) \ 155 " " __stringify(CONFIG_SYS_UBOOT_END) ";" \ 156 "era " __stringify(CONFIG_SYS_FLASH_BASE) " " \ 157 __stringify(CONFIG_SYS_UBOOT_END) ";" \ 158 "cp.b ${loadaddr} " __stringify(CONFIG_SYS_FLASH_BASE) \ 159 " ${filesize}; save\0" \ 160 "" 161 #endif 162 163 /* ATA configuration */ 164 #define CONFIG_ISO_PARTITION 165 #define CONFIG_DOS_PARTITION 166 #define CONFIG_IDE_RESET 1 167 #define CONFIG_IDE_PREINIT 1 168 #define CONFIG_ATAPI 169 #undef CONFIG_LBA48 170 171 #define CONFIG_SYS_IDE_MAXBUS 1 172 #define CONFIG_SYS_IDE_MAXDEVICE 2 173 174 #define CONFIG_SYS_ATA_BASE_ADDR 0x90000000 175 #define CONFIG_SYS_ATA_IDE0_OFFSET 0 176 177 #define CONFIG_SYS_ATA_DATA_OFFSET 0xA0 /* Offset for data I/O */ 178 #define CONFIG_SYS_ATA_REG_OFFSET 0xA0 /* Offset for normal register accesses */ 179 #define CONFIG_SYS_ATA_ALT_OFFSET 0xC0 /* Offset for alternate registers */ 180 #define CONFIG_SYS_ATA_STRIDE 4 /* Interval between registers */ 181 182 /* Realtime clock */ 183 #define CONFIG_MCFRTC 184 #undef RTC_DEBUG 185 #define CONFIG_SYS_RTC_OSCILLATOR (32 * CONFIG_SYS_HZ) 186 187 /* Timer */ 188 #define CONFIG_MCFTMR 189 #undef CONFIG_MCFPIT 190 191 /* I2c */ 192 #define CONFIG_FSL_I2C 193 #define CONFIG_HARD_I2C /* I2C with hardware support */ 194 #undef CONFIG_SOFT_I2C /* I2C bit-banged */ 195 #define CONFIG_SYS_I2C_SPEED 80000 /* I2C speed and slave address */ 196 #define CONFIG_SYS_I2C_SLAVE 0x7F 197 #define CONFIG_SYS_I2C_OFFSET 0x58000 198 #define CONFIG_SYS_IMMR CONFIG_SYS_MBAR 199 200 /* DSPI and Serial Flash */ 201 #define CONFIG_CF_SPI 202 #define CONFIG_CF_DSPI 203 #define CONFIG_HARD_SPI 204 #define CONFIG_SYS_SBFHDR_SIZE 0x13 205 #ifdef CONFIG_CMD_SPI 206 # define CONFIG_SPI_FLASH 207 # define CONFIG_SPI_FLASH_STMICRO 208 209 # define CONFIG_SYS_DSPI_CTAR0 (DSPI_CTAR_TRSZ(7) | \ 210 DSPI_CTAR_PCSSCK_1CLK | \ 211 DSPI_CTAR_PASC(0) | \ 212 DSPI_CTAR_PDT(0) | \ 213 DSPI_CTAR_CSSCK(0) | \ 214 DSPI_CTAR_ASC(0) | \ 215 DSPI_CTAR_DT(1)) 216 #endif 217 218 /* PCI */ 219 #ifdef CONFIG_CMD_PCI 220 #define CONFIG_PCI 1 221 #define CONFIG_PCI_PNP 1 222 #define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1 223 224 #define CONFIG_SYS_PCI_CACHE_LINE_SIZE 4 225 226 #define CONFIG_SYS_PCI_MEM_BUS 0xA0000000 227 #define CONFIG_SYS_PCI_MEM_PHYS CONFIG_SYS_PCI_MEM_BUS 228 #define CONFIG_SYS_PCI_MEM_SIZE 0x10000000 229 230 #define CONFIG_SYS_PCI_IO_BUS 0xB1000000 231 #define CONFIG_SYS_PCI_IO_PHYS CONFIG_SYS_PCI_IO_BUS 232 #define CONFIG_SYS_PCI_IO_SIZE 0x01000000 233 234 #define CONFIG_SYS_PCI_CFG_BUS 0xB0000000 235 #define CONFIG_SYS_PCI_CFG_PHYS CONFIG_SYS_PCI_CFG_BUS 236 #define CONFIG_SYS_PCI_CFG_SIZE 0x01000000 237 #endif 238 239 /* FPGA - Spartan 2 */ 240 /* experiment 241 #define CONFIG_FPGA 242 #define CONFIG_FPGA_COUNT 1 243 #define CONFIG_SYS_FPGA_PROG_FEEDBACK 244 #define CONFIG_SYS_FPGA_CHECK_CTRLC 245 */ 246 247 /* Input, PCI, Flexbus, and VCO */ 248 #define CONFIG_EXTRA_CLOCK 249 250 #define CONFIG_PRAM 2048 /* 2048 KB */ 251 252 #define CONFIG_SYS_PROMPT "-> " 253 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 254 255 #if defined(CONFIG_CMD_KGDB) 256 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 257 #else 258 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 259 #endif 260 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ 261 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 262 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 263 264 #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x10000) 265 266 #define CONFIG_SYS_HZ 1000 267 268 #define CONFIG_SYS_MBAR 0xFC000000 269 270 /* 271 * Low Level Configuration Settings 272 * (address mappings, register initial values, etc.) 273 * You should know what you are doing if you make changes here. 274 */ 275 276 /*----------------------------------------------------------------------- 277 * Definitions for initial stack pointer and data area (in DPRAM) 278 */ 279 #define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 280 #define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* Size of used area in internal SRAM */ 281 #define CONFIG_SYS_INIT_RAM_CTRL 0x221 282 #define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 32) 283 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 284 #define CONFIG_SYS_SBFHDR_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - 32) 285 286 /*----------------------------------------------------------------------- 287 * Start addresses for the final memory configuration 288 * (Set up by the startup code) 289 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 290 */ 291 #define CONFIG_SYS_SDRAM_BASE 0x40000000 292 #define CONFIG_SYS_SDRAM_BASE1 0x48000000 293 #define CONFIG_SYS_SDRAM_SIZE 256 /* SDRAM size in MB */ 294 #define CONFIG_SYS_SDRAM_CFG1 0x65311610 295 #define CONFIG_SYS_SDRAM_CFG2 0x59670000 296 #define CONFIG_SYS_SDRAM_CTRL 0xEA0B2000 297 #define CONFIG_SYS_SDRAM_EMOD 0x40010000 298 #define CONFIG_SYS_SDRAM_MODE 0x00010033 299 #define CONFIG_SYS_SDRAM_DRV_STRENGTH 0xAA 300 301 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE + 0x400 302 #define CONFIG_SYS_MEMTEST_END ((CONFIG_SYS_SDRAM_SIZE - 3) << 20) 303 304 #ifdef CONFIG_CF_SBF 305 # define CONFIG_SERIAL_BOOT 306 # define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_TEXT_BASE + 0x400) 307 #else 308 # define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400) 309 #endif 310 #define CONFIG_SYS_BOOTPARAMS_LEN 64*1024 311 #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ 312 313 /* Reserve 256 kB for malloc() */ 314 #define CONFIG_SYS_MALLOC_LEN (256 << 10) 315 316 /* 317 * For booting Linux, the board info and command line data 318 * have to be in the first 8 MB of memory, since this is 319 * the maximum mapped by the Linux kernel during initialization ?? 320 */ 321 /* Initial Memory map for Linux */ 322 #define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20)) 323 324 /* 325 * Configuration for environment 326 * Environment is not embedded in u-boot. First time runing may have env 327 * crc error warning if there is no correct environment on the flash. 328 */ 329 #ifdef CONFIG_CF_SBF 330 # define CONFIG_ENV_IS_IN_SPI_FLASH 331 # define CONFIG_ENV_SPI_CS 1 332 #else 333 # define CONFIG_ENV_IS_IN_FLASH 1 334 #endif 335 #undef CONFIG_ENV_OVERWRITE 336 337 /*----------------------------------------------------------------------- 338 * FLASH organization 339 */ 340 #ifdef CONFIG_SYS_STMICRO_BOOT 341 # define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE 342 # define CONFIG_SYS_FLASH0_BASE CONFIG_SYS_CS1_BASE 343 # define CONFIG_ENV_OFFSET 0x30000 344 # define CONFIG_ENV_SIZE 0x2000 345 # define CONFIG_ENV_SECT_SIZE 0x10000 346 #endif 347 #ifdef CONFIG_SYS_ATMEL_BOOT 348 # define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE 349 # define CONFIG_SYS_FLASH0_BASE CONFIG_SYS_CS0_BASE 350 # define CONFIG_SYS_FLASH1_BASE CONFIG_SYS_CS1_BASE 351 # define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x40000) 352 # define CONFIG_ENV_SIZE 0x2000 353 # define CONFIG_ENV_SECT_SIZE 0x10000 354 #endif 355 #ifdef CONFIG_SYS_INTEL_BOOT 356 # define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE 357 # define CONFIG_SYS_FLASH0_BASE CONFIG_SYS_CS0_BASE 358 # define CONFIG_SYS_FLASH1_BASE CONFIG_SYS_CS1_BASE 359 # define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x40000) 360 # define CONFIG_ENV_SIZE 0x2000 361 # define CONFIG_ENV_SECT_SIZE 0x20000 362 #endif 363 364 #define CONFIG_SYS_FLASH_CFI 365 #ifdef CONFIG_SYS_FLASH_CFI 366 367 # define CONFIG_FLASH_CFI_DRIVER 1 368 # define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 369 # define CONFIG_SYS_FLASH_SIZE 0x1000000 /* Max size that the board might have */ 370 # define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_8BIT 371 # define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ 372 # define CONFIG_SYS_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ 373 # define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ 374 # define CONFIG_SYS_FLASH_CHECKSUM 375 # define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_CS0_BASE, CONFIG_SYS_CS1_BASE } 376 # define CONFIG_FLASH_CFI_LEGACY 377 378 #ifdef CONFIG_FLASH_CFI_LEGACY 379 # define CONFIG_SYS_ATMEL_REGION 4 380 # define CONFIG_SYS_ATMEL_TOTALSECT 11 381 # define CONFIG_SYS_ATMEL_SECT {1, 2, 1, 7} 382 # define CONFIG_SYS_ATMEL_SECTSZ {0x4000, 0x2000, 0x8000, 0x10000} 383 #endif 384 #endif 385 386 /* 387 * This is setting for JFFS2 support in u-boot. 388 * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support. 389 */ 390 #ifdef CONFIG_CMD_JFFS2 391 #ifdef CF_STMICRO_BOOT 392 # define CONFIG_JFFS2_DEV "nor1" 393 # define CONFIG_JFFS2_PART_SIZE 0x01000000 394 # define CONFIG_JFFS2_PART_OFFSET (CONFIG_SYS_FLASH2_BASE + 0x500000) 395 #endif 396 #ifdef CONFIG_SYS_ATMEL_BOOT 397 # define CONFIG_JFFS2_DEV "nor1" 398 # define CONFIG_JFFS2_PART_SIZE 0x01000000 399 # define CONFIG_JFFS2_PART_OFFSET (CONFIG_SYS_FLASH1_BASE + 0x500000) 400 #endif 401 #ifdef CONFIG_SYS_INTEL_BOOT 402 # define CONFIG_JFFS2_DEV "nor0" 403 # define CONFIG_JFFS2_PART_SIZE (0x01000000 - 0x500000) 404 # define CONFIG_JFFS2_PART_OFFSET (CONFIG_SYS_FLASH0_BASE + 0x500000) 405 #endif 406 #endif 407 408 /*----------------------------------------------------------------------- 409 * Cache Configuration 410 */ 411 #define CONFIG_SYS_CACHELINE_SIZE 16 412 413 #define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ 414 CONFIG_SYS_INIT_RAM_SIZE - 8) 415 #define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ 416 CONFIG_SYS_INIT_RAM_SIZE - 4) 417 #define CONFIG_SYS_ICACHE_INV (CF_CACR_BCINVA + CF_CACR_ICINVA) 418 #define CONFIG_SYS_DCACHE_INV (CF_CACR_DCINVA) 419 #define CONFIG_SYS_CACHE_ACR2 (CONFIG_SYS_SDRAM_BASE | \ 420 CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ 421 CF_ACR_EN | CF_ACR_SM_ALL) 422 #define CONFIG_SYS_CACHE_ICACR (CF_CACR_BEC | CF_CACR_IEC | \ 423 CF_CACR_ICINVA | CF_CACR_EUSP) 424 #define CONFIG_SYS_CACHE_DCACR ((CONFIG_SYS_CACHE_ICACR | \ 425 CF_CACR_DEC | CF_CACR_DDCM_P | \ 426 CF_CACR_DCINVA) & ~CF_CACR_ICINVA) 427 428 /*----------------------------------------------------------------------- 429 * Memory bank definitions 430 */ 431 /* 432 * CS0 - NOR Flash 1, 2, 4, or 8MB 433 * CS1 - CompactFlash and registers 434 * CS2 - CPLD 435 * CS3 - FPGA 436 * CS4 - Available 437 * CS5 - Available 438 */ 439 440 #if defined(CONFIG_SYS_ATMEL_BOOT) || defined(CONFIG_SYS_STMICRO_BOOT) 441 /* Atmel Flash */ 442 #define CONFIG_SYS_CS0_BASE 0x04000000 443 #define CONFIG_SYS_CS0_MASK 0x00070001 444 #define CONFIG_SYS_CS0_CTRL 0x00001140 445 /* Intel Flash */ 446 #define CONFIG_SYS_CS1_BASE 0x00000000 447 #define CONFIG_SYS_CS1_MASK 0x01FF0001 448 #define CONFIG_SYS_CS1_CTRL 0x00000D60 449 450 #define CONFIG_SYS_ATMEL_BASE CONFIG_SYS_CS0_BASE 451 #else 452 /* Intel Flash */ 453 #define CONFIG_SYS_CS0_BASE 0x00000000 454 #define CONFIG_SYS_CS0_MASK 0x01FF0001 455 #define CONFIG_SYS_CS0_CTRL 0x00000D60 456 /* Atmel Flash */ 457 #define CONFIG_SYS_CS1_BASE 0x04000000 458 #define CONFIG_SYS_CS1_MASK 0x00070001 459 #define CONFIG_SYS_CS1_CTRL 0x00001140 460 461 #define CONFIG_SYS_ATMEL_BASE CONFIG_SYS_CS1_BASE 462 #endif 463 464 /* CPLD */ 465 #define CONFIG_SYS_CS2_BASE 0x08000000 466 #define CONFIG_SYS_CS2_MASK 0x00070001 467 #define CONFIG_SYS_CS2_CTRL 0x003f1140 468 469 /* FPGA */ 470 #define CONFIG_SYS_CS3_BASE 0x09000000 471 #define CONFIG_SYS_CS3_MASK 0x00070001 472 #define CONFIG_SYS_CS3_CTRL 0x00000020 473 474 #endif /* _M54455EVB_H */ 475