1 /* 2 * Configuation settings for the Freescale MCF54455 EVB board. 3 * 4 * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. 5 * TsiChung Liew (Tsi-Chung.Liew@freescale.com) 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 /* 11 * board/config.h - configuration options, board specific 12 */ 13 14 #ifndef _M54455EVB_H 15 #define _M54455EVB_H 16 17 /* 18 * High Level Configuration Options 19 * (easy to change) 20 */ 21 #define CONFIG_M54455EVB /* M54455EVB board */ 22 23 #define CONFIG_MCFUART 24 #define CONFIG_SYS_UART_PORT (0) 25 26 #define LDS_BOARD_TEXT board/freescale/m54455evb/sbf_dram_init.o (.text*) 27 28 #undef CONFIG_WATCHDOG 29 30 #define CONFIG_TIMESTAMP /* Print image info with timestamp */ 31 32 /* 33 * BOOTP options 34 */ 35 #define CONFIG_BOOTP_BOOTFILESIZE 36 37 /* Network configuration */ 38 #define CONFIG_MCFFEC 39 #ifdef CONFIG_MCFFEC 40 # define CONFIG_MII 1 41 # define CONFIG_MII_INIT 1 42 # define CONFIG_SYS_DISCOVER_PHY 43 # define CONFIG_SYS_RX_ETH_BUFFER 8 44 # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 45 46 # define CONFIG_SYS_FEC0_PINMUX 0 47 # define CONFIG_SYS_FEC1_PINMUX 0 48 # define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE 49 # define CONFIG_SYS_FEC1_MIIBASE CONFIG_SYS_FEC0_IOBASE 50 # define MCFFEC_TOUT_LOOP 50000 51 # define CONFIG_HAS_ETH1 52 53 # define CONFIG_ETHPRIME "FEC0" 54 # define CONFIG_IPADDR 192.162.1.2 55 # define CONFIG_NETMASK 255.255.255.0 56 # define CONFIG_SERVERIP 192.162.1.1 57 # define CONFIG_GATEWAYIP 192.162.1.1 58 59 /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */ 60 # ifndef CONFIG_SYS_DISCOVER_PHY 61 # define FECDUPLEX FULL 62 # define FECSPEED _100BASET 63 # else 64 # ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN 65 # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 66 # endif 67 # endif /* CONFIG_SYS_DISCOVER_PHY */ 68 #endif 69 70 #define CONFIG_HOSTNAME "M54455EVB" 71 #ifdef CONFIG_SYS_STMICRO_BOOT 72 /* ST Micro serial flash */ 73 #define CONFIG_SYS_LOAD_ADDR2 0x40010013 74 #define CONFIG_EXTRA_ENV_SETTINGS \ 75 "netdev=eth0\0" \ 76 "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0" \ 77 "loadaddr=0x40010000\0" \ 78 "sbfhdr=sbfhdr.bin\0" \ 79 "uboot=u-boot.bin\0" \ 80 "load=tftp ${loadaddr} ${sbfhdr};" \ 81 "tftp " __stringify(CONFIG_SYS_LOAD_ADDR2) " ${uboot} \0" \ 82 "upd=run load; run prog\0" \ 83 "prog=sf probe 0:1 1000000 3;" \ 84 "sf erase 0 30000;" \ 85 "sf write ${loadaddr} 0 0x30000;" \ 86 "save\0" \ 87 "" 88 #else 89 /* Atmel and Intel */ 90 #ifdef CONFIG_SYS_ATMEL_BOOT 91 # define CONFIG_SYS_UBOOT_END 0x0403FFFF 92 #elif defined(CONFIG_SYS_INTEL_BOOT) 93 # define CONFIG_SYS_UBOOT_END 0x3FFFF 94 #endif 95 #define CONFIG_EXTRA_ENV_SETTINGS \ 96 "netdev=eth0\0" \ 97 "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0" \ 98 "loadaddr=0x40010000\0" \ 99 "uboot=u-boot.bin\0" \ 100 "load=tftp ${loadaddr} ${uboot}\0" \ 101 "upd=run load; run prog\0" \ 102 "prog=prot off " __stringify(CONFIG_SYS_FLASH_BASE) \ 103 " " __stringify(CONFIG_SYS_UBOOT_END) ";" \ 104 "era " __stringify(CONFIG_SYS_FLASH_BASE) " " \ 105 __stringify(CONFIG_SYS_UBOOT_END) ";" \ 106 "cp.b ${loadaddr} " __stringify(CONFIG_SYS_FLASH_BASE) \ 107 " ${filesize}; save\0" \ 108 "" 109 #endif 110 111 /* ATA configuration */ 112 #define CONFIG_IDE_RESET 1 113 #define CONFIG_IDE_PREINIT 1 114 #define CONFIG_ATAPI 115 #undef CONFIG_LBA48 116 117 #define CONFIG_SYS_IDE_MAXBUS 1 118 #define CONFIG_SYS_IDE_MAXDEVICE 2 119 120 #define CONFIG_SYS_ATA_BASE_ADDR 0x90000000 121 #define CONFIG_SYS_ATA_IDE0_OFFSET 0 122 123 #define CONFIG_SYS_ATA_DATA_OFFSET 0xA0 /* Offset for data I/O */ 124 #define CONFIG_SYS_ATA_REG_OFFSET 0xA0 /* Offset for normal register accesses */ 125 #define CONFIG_SYS_ATA_ALT_OFFSET 0xC0 /* Offset for alternate registers */ 126 #define CONFIG_SYS_ATA_STRIDE 4 /* Interval between registers */ 127 128 /* Realtime clock */ 129 #define CONFIG_MCFRTC 130 #undef RTC_DEBUG 131 #define CONFIG_SYS_RTC_OSCILLATOR (32 * CONFIG_SYS_HZ) 132 133 /* Timer */ 134 #define CONFIG_MCFTMR 135 #undef CONFIG_MCFPIT 136 137 /* I2c */ 138 #define CONFIG_SYS_I2C 139 #define CONFIG_SYS_I2C_FSL 140 #define CONFIG_SYS_FSL_I2C_SPEED 80000 141 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 142 #define CONFIG_SYS_FSL_I2C_OFFSET 0x58000 143 #define CONFIG_SYS_IMMR CONFIG_SYS_MBAR 144 145 /* DSPI and Serial Flash */ 146 #define CONFIG_CF_DSPI 147 #define CONFIG_HARD_SPI 148 #define CONFIG_SYS_SBFHDR_SIZE 0x13 149 #ifdef CONFIG_CMD_SPI 150 151 # define CONFIG_SYS_DSPI_CTAR0 (DSPI_CTAR_TRSZ(7) | \ 152 DSPI_CTAR_PCSSCK_1CLK | \ 153 DSPI_CTAR_PASC(0) | \ 154 DSPI_CTAR_PDT(0) | \ 155 DSPI_CTAR_CSSCK(0) | \ 156 DSPI_CTAR_ASC(0) | \ 157 DSPI_CTAR_DT(1)) 158 #endif 159 160 /* PCI */ 161 #ifdef CONFIG_CMD_PCI 162 #define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1 163 164 #define CONFIG_SYS_PCI_CACHE_LINE_SIZE 4 165 166 #define CONFIG_SYS_PCI_MEM_BUS 0xA0000000 167 #define CONFIG_SYS_PCI_MEM_PHYS CONFIG_SYS_PCI_MEM_BUS 168 #define CONFIG_SYS_PCI_MEM_SIZE 0x10000000 169 170 #define CONFIG_SYS_PCI_IO_BUS 0xB1000000 171 #define CONFIG_SYS_PCI_IO_PHYS CONFIG_SYS_PCI_IO_BUS 172 #define CONFIG_SYS_PCI_IO_SIZE 0x01000000 173 174 #define CONFIG_SYS_PCI_CFG_BUS 0xB0000000 175 #define CONFIG_SYS_PCI_CFG_PHYS CONFIG_SYS_PCI_CFG_BUS 176 #define CONFIG_SYS_PCI_CFG_SIZE 0x01000000 177 #endif 178 179 /* FPGA - Spartan 2 */ 180 /* experiment 181 #define CONFIG_FPGA_COUNT 1 182 #define CONFIG_SYS_FPGA_PROG_FEEDBACK 183 #define CONFIG_SYS_FPGA_CHECK_CTRLC 184 */ 185 186 /* Input, PCI, Flexbus, and VCO */ 187 #define CONFIG_EXTRA_CLOCK 188 189 #define CONFIG_PRAM 2048 /* 2048 KB */ 190 191 #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x10000) 192 193 #define CONFIG_SYS_MBAR 0xFC000000 194 195 /* 196 * Low Level Configuration Settings 197 * (address mappings, register initial values, etc.) 198 * You should know what you are doing if you make changes here. 199 */ 200 201 /*----------------------------------------------------------------------- 202 * Definitions for initial stack pointer and data area (in DPRAM) 203 */ 204 #define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 205 #define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* Size of used area in internal SRAM */ 206 #define CONFIG_SYS_INIT_RAM_CTRL 0x221 207 #define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 32) 208 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 209 #define CONFIG_SYS_SBFHDR_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - 32) 210 211 /*----------------------------------------------------------------------- 212 * Start addresses for the final memory configuration 213 * (Set up by the startup code) 214 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 215 */ 216 #define CONFIG_SYS_SDRAM_BASE 0x40000000 217 #define CONFIG_SYS_SDRAM_BASE1 0x48000000 218 #define CONFIG_SYS_SDRAM_SIZE 256 /* SDRAM size in MB */ 219 #define CONFIG_SYS_SDRAM_CFG1 0x65311610 220 #define CONFIG_SYS_SDRAM_CFG2 0x59670000 221 #define CONFIG_SYS_SDRAM_CTRL 0xEA0B2000 222 #define CONFIG_SYS_SDRAM_EMOD 0x40010000 223 #define CONFIG_SYS_SDRAM_MODE 0x00010033 224 #define CONFIG_SYS_SDRAM_DRV_STRENGTH 0xAA 225 226 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE + 0x400 227 #define CONFIG_SYS_MEMTEST_END ((CONFIG_SYS_SDRAM_SIZE - 3) << 20) 228 229 #ifdef CONFIG_CF_SBF 230 # define CONFIG_SERIAL_BOOT 231 # define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_TEXT_BASE + 0x400) 232 #else 233 # define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400) 234 #endif 235 #define CONFIG_SYS_BOOTPARAMS_LEN 64*1024 236 #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ 237 238 /* Reserve 256 kB for malloc() */ 239 #define CONFIG_SYS_MALLOC_LEN (256 << 10) 240 241 /* 242 * For booting Linux, the board info and command line data 243 * have to be in the first 8 MB of memory, since this is 244 * the maximum mapped by the Linux kernel during initialization ?? 245 */ 246 /* Initial Memory map for Linux */ 247 #define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20)) 248 249 /* 250 * Configuration for environment 251 * Environment is not embedded in u-boot. First time runing may have env 252 * crc error warning if there is no correct environment on the flash. 253 */ 254 #ifdef CONFIG_CF_SBF 255 # define CONFIG_ENV_SPI_CS 1 256 #endif 257 #undef CONFIG_ENV_OVERWRITE 258 259 /*----------------------------------------------------------------------- 260 * FLASH organization 261 */ 262 #ifdef CONFIG_SYS_STMICRO_BOOT 263 # define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE 264 # define CONFIG_SYS_FLASH0_BASE CONFIG_SYS_CS1_BASE 265 # define CONFIG_ENV_OFFSET 0x30000 266 # define CONFIG_ENV_SIZE 0x2000 267 # define CONFIG_ENV_SECT_SIZE 0x10000 268 #endif 269 #ifdef CONFIG_SYS_ATMEL_BOOT 270 # define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE 271 # define CONFIG_SYS_FLASH0_BASE CONFIG_SYS_CS0_BASE 272 # define CONFIG_SYS_FLASH1_BASE CONFIG_SYS_CS1_BASE 273 # define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x40000) 274 # define CONFIG_ENV_SIZE 0x2000 275 # define CONFIG_ENV_SECT_SIZE 0x10000 276 #endif 277 #ifdef CONFIG_SYS_INTEL_BOOT 278 # define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE 279 # define CONFIG_SYS_FLASH0_BASE CONFIG_SYS_CS0_BASE 280 # define CONFIG_SYS_FLASH1_BASE CONFIG_SYS_CS1_BASE 281 # define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x40000) 282 # define CONFIG_ENV_SIZE 0x2000 283 # define CONFIG_ENV_SECT_SIZE 0x20000 284 #endif 285 286 #define CONFIG_SYS_FLASH_CFI 287 #ifdef CONFIG_SYS_FLASH_CFI 288 289 # define CONFIG_FLASH_CFI_DRIVER 1 290 # define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 291 # define CONFIG_SYS_FLASH_SIZE 0x1000000 /* Max size that the board might have */ 292 # define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_8BIT 293 # define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ 294 # define CONFIG_SYS_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ 295 # define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ 296 # define CONFIG_SYS_FLASH_CHECKSUM 297 # define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_CS0_BASE, CONFIG_SYS_CS1_BASE } 298 # define CONFIG_FLASH_CFI_LEGACY 299 300 #ifdef CONFIG_FLASH_CFI_LEGACY 301 # define CONFIG_SYS_ATMEL_REGION 4 302 # define CONFIG_SYS_ATMEL_TOTALSECT 11 303 # define CONFIG_SYS_ATMEL_SECT {1, 2, 1, 7} 304 # define CONFIG_SYS_ATMEL_SECTSZ {0x4000, 0x2000, 0x8000, 0x10000} 305 #endif 306 #endif 307 308 /* 309 * This is setting for JFFS2 support in u-boot. 310 * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support. 311 */ 312 #ifdef CONFIG_CMD_JFFS2 313 #ifdef CF_STMICRO_BOOT 314 # define CONFIG_JFFS2_DEV "nor1" 315 # define CONFIG_JFFS2_PART_SIZE 0x01000000 316 # define CONFIG_JFFS2_PART_OFFSET (CONFIG_SYS_FLASH2_BASE + 0x500000) 317 #endif 318 #ifdef CONFIG_SYS_ATMEL_BOOT 319 # define CONFIG_JFFS2_DEV "nor1" 320 # define CONFIG_JFFS2_PART_SIZE 0x01000000 321 # define CONFIG_JFFS2_PART_OFFSET (CONFIG_SYS_FLASH1_BASE + 0x500000) 322 #endif 323 #ifdef CONFIG_SYS_INTEL_BOOT 324 # define CONFIG_JFFS2_DEV "nor0" 325 # define CONFIG_JFFS2_PART_SIZE (0x01000000 - 0x500000) 326 # define CONFIG_JFFS2_PART_OFFSET (CONFIG_SYS_FLASH0_BASE + 0x500000) 327 #endif 328 #endif 329 330 /*----------------------------------------------------------------------- 331 * Cache Configuration 332 */ 333 #define CONFIG_SYS_CACHELINE_SIZE 16 334 335 #define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ 336 CONFIG_SYS_INIT_RAM_SIZE - 8) 337 #define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ 338 CONFIG_SYS_INIT_RAM_SIZE - 4) 339 #define CONFIG_SYS_ICACHE_INV (CF_CACR_BCINVA + CF_CACR_ICINVA) 340 #define CONFIG_SYS_DCACHE_INV (CF_CACR_DCINVA) 341 #define CONFIG_SYS_CACHE_ACR2 (CONFIG_SYS_SDRAM_BASE | \ 342 CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ 343 CF_ACR_EN | CF_ACR_SM_ALL) 344 #define CONFIG_SYS_CACHE_ICACR (CF_CACR_BEC | CF_CACR_IEC | \ 345 CF_CACR_ICINVA | CF_CACR_EUSP) 346 #define CONFIG_SYS_CACHE_DCACR ((CONFIG_SYS_CACHE_ICACR | \ 347 CF_CACR_DEC | CF_CACR_DDCM_P | \ 348 CF_CACR_DCINVA) & ~CF_CACR_ICINVA) 349 350 /*----------------------------------------------------------------------- 351 * Memory bank definitions 352 */ 353 /* 354 * CS0 - NOR Flash 1, 2, 4, or 8MB 355 * CS1 - CompactFlash and registers 356 * CS2 - CPLD 357 * CS3 - FPGA 358 * CS4 - Available 359 * CS5 - Available 360 */ 361 362 #if defined(CONFIG_SYS_ATMEL_BOOT) || defined(CONFIG_SYS_STMICRO_BOOT) 363 /* Atmel Flash */ 364 #define CONFIG_SYS_CS0_BASE 0x04000000 365 #define CONFIG_SYS_CS0_MASK 0x00070001 366 #define CONFIG_SYS_CS0_CTRL 0x00001140 367 /* Intel Flash */ 368 #define CONFIG_SYS_CS1_BASE 0x00000000 369 #define CONFIG_SYS_CS1_MASK 0x01FF0001 370 #define CONFIG_SYS_CS1_CTRL 0x00000D60 371 372 #define CONFIG_SYS_ATMEL_BASE CONFIG_SYS_CS0_BASE 373 #else 374 /* Intel Flash */ 375 #define CONFIG_SYS_CS0_BASE 0x00000000 376 #define CONFIG_SYS_CS0_MASK 0x01FF0001 377 #define CONFIG_SYS_CS0_CTRL 0x00000D60 378 /* Atmel Flash */ 379 #define CONFIG_SYS_CS1_BASE 0x04000000 380 #define CONFIG_SYS_CS1_MASK 0x00070001 381 #define CONFIG_SYS_CS1_CTRL 0x00001140 382 383 #define CONFIG_SYS_ATMEL_BASE CONFIG_SYS_CS1_BASE 384 #endif 385 386 /* CPLD */ 387 #define CONFIG_SYS_CS2_BASE 0x08000000 388 #define CONFIG_SYS_CS2_MASK 0x00070001 389 #define CONFIG_SYS_CS2_CTRL 0x003f1140 390 391 /* FPGA */ 392 #define CONFIG_SYS_CS3_BASE 0x09000000 393 #define CONFIG_SYS_CS3_MASK 0x00070001 394 #define CONFIG_SYS_CS3_CTRL 0x00000020 395 396 #endif /* _M54455EVB_H */ 397