1 /* 2 * Configuation settings for the Freescale MCF54455 EVB board. 3 * 4 * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. 5 * TsiChung Liew (Tsi-Chung.Liew@freescale.com) 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 /* 11 * board/config.h - configuration options, board specific 12 */ 13 14 #ifndef _M54455EVB_H 15 #define _M54455EVB_H 16 17 /* 18 * High Level Configuration Options 19 * (easy to change) 20 */ 21 #define CONFIG_MCF5445x /* define processor family */ 22 #define CONFIG_M54455 /* define processor type */ 23 #define CONFIG_M54455EVB /* M54455EVB board */ 24 25 #define CONFIG_DISPLAY_BOARDINFO 26 27 #define CONFIG_MCFUART 28 #define CONFIG_SYS_UART_PORT (0) 29 #define CONFIG_BAUDRATE 115200 30 31 #undef CONFIG_WATCHDOG 32 33 #define CONFIG_TIMESTAMP /* Print image info with timestamp */ 34 35 /* 36 * BOOTP options 37 */ 38 #define CONFIG_BOOTP_BOOTFILESIZE 39 #define CONFIG_BOOTP_BOOTPATH 40 #define CONFIG_BOOTP_GATEWAY 41 #define CONFIG_BOOTP_HOSTNAME 42 43 /* Command line configuration */ 44 #include <config_cmd_default.h> 45 46 #define CONFIG_CMD_BOOTD 47 #define CONFIG_CMD_CACHE 48 #define CONFIG_CMD_DATE 49 #define CONFIG_CMD_DHCP 50 #define CONFIG_CMD_ELF 51 #define CONFIG_CMD_EXT2 52 #define CONFIG_CMD_FAT 53 #define CONFIG_CMD_FLASH 54 #define CONFIG_CMD_I2C 55 #define CONFIG_CMD_IDE 56 #define CONFIG_CMD_JFFS2 57 #define CONFIG_CMD_MEMORY 58 #define CONFIG_CMD_MISC 59 #define CONFIG_CMD_MII 60 #define CONFIG_CMD_NET 61 #undef CONFIG_CMD_PCI 62 #define CONFIG_CMD_PING 63 #define CONFIG_CMD_REGINFO 64 #define CONFIG_CMD_SPI 65 #define CONFIG_CMD_SF 66 67 #undef CONFIG_CMD_LOADB 68 #undef CONFIG_CMD_LOADS 69 70 /* Network configuration */ 71 #define CONFIG_MCFFEC 72 #ifdef CONFIG_MCFFEC 73 # define CONFIG_MII 1 74 # define CONFIG_MII_INIT 1 75 # define CONFIG_SYS_DISCOVER_PHY 76 # define CONFIG_SYS_RX_ETH_BUFFER 8 77 # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 78 79 # define CONFIG_SYS_FEC0_PINMUX 0 80 # define CONFIG_SYS_FEC1_PINMUX 0 81 # define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE 82 # define CONFIG_SYS_FEC1_MIIBASE CONFIG_SYS_FEC0_IOBASE 83 # define MCFFEC_TOUT_LOOP 50000 84 # define CONFIG_HAS_ETH1 85 86 # define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */ 87 # define CONFIG_BOOTARGS "root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=physmap-flash.0:5M(kernel)ro,-(jffs2)" 88 # define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 89 # define CONFIG_ETH1ADDR 00:e0:0c:bc:e5:61 90 # define CONFIG_ETHPRIME "FEC0" 91 # define CONFIG_IPADDR 192.162.1.2 92 # define CONFIG_NETMASK 255.255.255.0 93 # define CONFIG_SERVERIP 192.162.1.1 94 # define CONFIG_GATEWAYIP 192.162.1.1 95 # define CONFIG_OVERWRITE_ETHADDR_ONCE 96 97 /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */ 98 # ifndef CONFIG_SYS_DISCOVER_PHY 99 # define FECDUPLEX FULL 100 # define FECSPEED _100BASET 101 # else 102 # ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN 103 # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 104 # endif 105 # endif /* CONFIG_SYS_DISCOVER_PHY */ 106 #endif 107 108 #define CONFIG_HOSTNAME M54455EVB 109 #ifdef CONFIG_SYS_STMICRO_BOOT 110 /* ST Micro serial flash */ 111 #define CONFIG_SYS_LOAD_ADDR2 0x40010013 112 #define CONFIG_EXTRA_ENV_SETTINGS \ 113 "netdev=eth0\0" \ 114 "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0" \ 115 "loadaddr=0x40010000\0" \ 116 "sbfhdr=sbfhdr.bin\0" \ 117 "uboot=u-boot.bin\0" \ 118 "load=tftp ${loadaddr} ${sbfhdr};" \ 119 "tftp " __stringify(CONFIG_SYS_LOAD_ADDR2) " ${uboot} \0" \ 120 "upd=run load; run prog\0" \ 121 "prog=sf probe 0:1 1000000 3;" \ 122 "sf erase 0 30000;" \ 123 "sf write ${loadaddr} 0 0x30000;" \ 124 "save\0" \ 125 "" 126 #else 127 /* Atmel and Intel */ 128 #ifdef CONFIG_SYS_ATMEL_BOOT 129 # define CONFIG_SYS_UBOOT_END 0x0403FFFF 130 #elif defined(CONFIG_SYS_INTEL_BOOT) 131 # define CONFIG_SYS_UBOOT_END 0x3FFFF 132 #endif 133 #define CONFIG_EXTRA_ENV_SETTINGS \ 134 "netdev=eth0\0" \ 135 "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0" \ 136 "loadaddr=0x40010000\0" \ 137 "uboot=u-boot.bin\0" \ 138 "load=tftp ${loadaddr} ${uboot}\0" \ 139 "upd=run load; run prog\0" \ 140 "prog=prot off " __stringify(CONFIG_SYS_FLASH_BASE) \ 141 " " __stringify(CONFIG_SYS_UBOOT_END) ";" \ 142 "era " __stringify(CONFIG_SYS_FLASH_BASE) " " \ 143 __stringify(CONFIG_SYS_UBOOT_END) ";" \ 144 "cp.b ${loadaddr} " __stringify(CONFIG_SYS_FLASH_BASE) \ 145 " ${filesize}; save\0" \ 146 "" 147 #endif 148 149 /* ATA configuration */ 150 #define CONFIG_ISO_PARTITION 151 #define CONFIG_DOS_PARTITION 152 #define CONFIG_IDE_RESET 1 153 #define CONFIG_IDE_PREINIT 1 154 #define CONFIG_ATAPI 155 #undef CONFIG_LBA48 156 157 #define CONFIG_SYS_IDE_MAXBUS 1 158 #define CONFIG_SYS_IDE_MAXDEVICE 2 159 160 #define CONFIG_SYS_ATA_BASE_ADDR 0x90000000 161 #define CONFIG_SYS_ATA_IDE0_OFFSET 0 162 163 #define CONFIG_SYS_ATA_DATA_OFFSET 0xA0 /* Offset for data I/O */ 164 #define CONFIG_SYS_ATA_REG_OFFSET 0xA0 /* Offset for normal register accesses */ 165 #define CONFIG_SYS_ATA_ALT_OFFSET 0xC0 /* Offset for alternate registers */ 166 #define CONFIG_SYS_ATA_STRIDE 4 /* Interval between registers */ 167 168 /* Realtime clock */ 169 #define CONFIG_MCFRTC 170 #undef RTC_DEBUG 171 #define CONFIG_SYS_RTC_OSCILLATOR (32 * CONFIG_SYS_HZ) 172 173 /* Timer */ 174 #define CONFIG_MCFTMR 175 #undef CONFIG_MCFPIT 176 177 /* I2c */ 178 #define CONFIG_SYS_I2C 179 #define CONFIG_SYS_I2C_FSL 180 #define CONFIG_SYS_FSL_I2C_SPEED 80000 181 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 182 #define CONFIG_SYS_FSL_I2C_OFFSET 0x58000 183 #define CONFIG_SYS_IMMR CONFIG_SYS_MBAR 184 185 /* DSPI and Serial Flash */ 186 #define CONFIG_CF_SPI 187 #define CONFIG_CF_DSPI 188 #define CONFIG_HARD_SPI 189 #define CONFIG_SYS_SBFHDR_SIZE 0x13 190 #ifdef CONFIG_CMD_SPI 191 # define CONFIG_SPI_FLASH 192 # define CONFIG_SPI_FLASH_STMICRO 193 194 # define CONFIG_SYS_DSPI_CTAR0 (DSPI_CTAR_TRSZ(7) | \ 195 DSPI_CTAR_PCSSCK_1CLK | \ 196 DSPI_CTAR_PASC(0) | \ 197 DSPI_CTAR_PDT(0) | \ 198 DSPI_CTAR_CSSCK(0) | \ 199 DSPI_CTAR_ASC(0) | \ 200 DSPI_CTAR_DT(1)) 201 #endif 202 203 /* PCI */ 204 #ifdef CONFIG_CMD_PCI 205 #define CONFIG_PCI 1 206 #define CONFIG_PCI_PNP 1 207 #define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1 208 209 #define CONFIG_SYS_PCI_CACHE_LINE_SIZE 4 210 211 #define CONFIG_SYS_PCI_MEM_BUS 0xA0000000 212 #define CONFIG_SYS_PCI_MEM_PHYS CONFIG_SYS_PCI_MEM_BUS 213 #define CONFIG_SYS_PCI_MEM_SIZE 0x10000000 214 215 #define CONFIG_SYS_PCI_IO_BUS 0xB1000000 216 #define CONFIG_SYS_PCI_IO_PHYS CONFIG_SYS_PCI_IO_BUS 217 #define CONFIG_SYS_PCI_IO_SIZE 0x01000000 218 219 #define CONFIG_SYS_PCI_CFG_BUS 0xB0000000 220 #define CONFIG_SYS_PCI_CFG_PHYS CONFIG_SYS_PCI_CFG_BUS 221 #define CONFIG_SYS_PCI_CFG_SIZE 0x01000000 222 #endif 223 224 /* FPGA - Spartan 2 */ 225 /* experiment 226 #define CONFIG_FPGA 227 #define CONFIG_FPGA_COUNT 1 228 #define CONFIG_SYS_FPGA_PROG_FEEDBACK 229 #define CONFIG_SYS_FPGA_CHECK_CTRLC 230 */ 231 232 /* Input, PCI, Flexbus, and VCO */ 233 #define CONFIG_EXTRA_CLOCK 234 235 #define CONFIG_PRAM 2048 /* 2048 KB */ 236 237 #define CONFIG_SYS_PROMPT "-> " 238 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 239 240 #if defined(CONFIG_CMD_KGDB) 241 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 242 #else 243 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 244 #endif 245 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ 246 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 247 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 248 249 #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x10000) 250 251 #define CONFIG_SYS_MBAR 0xFC000000 252 253 /* 254 * Low Level Configuration Settings 255 * (address mappings, register initial values, etc.) 256 * You should know what you are doing if you make changes here. 257 */ 258 259 /*----------------------------------------------------------------------- 260 * Definitions for initial stack pointer and data area (in DPRAM) 261 */ 262 #define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 263 #define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* Size of used area in internal SRAM */ 264 #define CONFIG_SYS_INIT_RAM_CTRL 0x221 265 #define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 32) 266 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 267 #define CONFIG_SYS_SBFHDR_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - 32) 268 269 /*----------------------------------------------------------------------- 270 * Start addresses for the final memory configuration 271 * (Set up by the startup code) 272 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 273 */ 274 #define CONFIG_SYS_SDRAM_BASE 0x40000000 275 #define CONFIG_SYS_SDRAM_BASE1 0x48000000 276 #define CONFIG_SYS_SDRAM_SIZE 256 /* SDRAM size in MB */ 277 #define CONFIG_SYS_SDRAM_CFG1 0x65311610 278 #define CONFIG_SYS_SDRAM_CFG2 0x59670000 279 #define CONFIG_SYS_SDRAM_CTRL 0xEA0B2000 280 #define CONFIG_SYS_SDRAM_EMOD 0x40010000 281 #define CONFIG_SYS_SDRAM_MODE 0x00010033 282 #define CONFIG_SYS_SDRAM_DRV_STRENGTH 0xAA 283 284 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE + 0x400 285 #define CONFIG_SYS_MEMTEST_END ((CONFIG_SYS_SDRAM_SIZE - 3) << 20) 286 287 #ifdef CONFIG_CF_SBF 288 # define CONFIG_SERIAL_BOOT 289 # define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_TEXT_BASE + 0x400) 290 #else 291 # define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400) 292 #endif 293 #define CONFIG_SYS_BOOTPARAMS_LEN 64*1024 294 #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ 295 296 /* Reserve 256 kB for malloc() */ 297 #define CONFIG_SYS_MALLOC_LEN (256 << 10) 298 299 /* 300 * For booting Linux, the board info and command line data 301 * have to be in the first 8 MB of memory, since this is 302 * the maximum mapped by the Linux kernel during initialization ?? 303 */ 304 /* Initial Memory map for Linux */ 305 #define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20)) 306 307 /* 308 * Configuration for environment 309 * Environment is not embedded in u-boot. First time runing may have env 310 * crc error warning if there is no correct environment on the flash. 311 */ 312 #ifdef CONFIG_CF_SBF 313 # define CONFIG_ENV_IS_IN_SPI_FLASH 314 # define CONFIG_ENV_SPI_CS 1 315 #else 316 # define CONFIG_ENV_IS_IN_FLASH 1 317 #endif 318 #undef CONFIG_ENV_OVERWRITE 319 320 /*----------------------------------------------------------------------- 321 * FLASH organization 322 */ 323 #ifdef CONFIG_SYS_STMICRO_BOOT 324 # define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE 325 # define CONFIG_SYS_FLASH0_BASE CONFIG_SYS_CS1_BASE 326 # define CONFIG_ENV_OFFSET 0x30000 327 # define CONFIG_ENV_SIZE 0x2000 328 # define CONFIG_ENV_SECT_SIZE 0x10000 329 #endif 330 #ifdef CONFIG_SYS_ATMEL_BOOT 331 # define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE 332 # define CONFIG_SYS_FLASH0_BASE CONFIG_SYS_CS0_BASE 333 # define CONFIG_SYS_FLASH1_BASE CONFIG_SYS_CS1_BASE 334 # define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x40000) 335 # define CONFIG_ENV_SIZE 0x2000 336 # define CONFIG_ENV_SECT_SIZE 0x10000 337 #endif 338 #ifdef CONFIG_SYS_INTEL_BOOT 339 # define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE 340 # define CONFIG_SYS_FLASH0_BASE CONFIG_SYS_CS0_BASE 341 # define CONFIG_SYS_FLASH1_BASE CONFIG_SYS_CS1_BASE 342 # define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x40000) 343 # define CONFIG_ENV_SIZE 0x2000 344 # define CONFIG_ENV_SECT_SIZE 0x20000 345 #endif 346 347 #define CONFIG_SYS_FLASH_CFI 348 #ifdef CONFIG_SYS_FLASH_CFI 349 350 # define CONFIG_FLASH_CFI_DRIVER 1 351 # define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 352 # define CONFIG_SYS_FLASH_SIZE 0x1000000 /* Max size that the board might have */ 353 # define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_8BIT 354 # define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ 355 # define CONFIG_SYS_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ 356 # define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ 357 # define CONFIG_SYS_FLASH_CHECKSUM 358 # define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_CS0_BASE, CONFIG_SYS_CS1_BASE } 359 # define CONFIG_FLASH_CFI_LEGACY 360 361 #ifdef CONFIG_FLASH_CFI_LEGACY 362 # define CONFIG_SYS_ATMEL_REGION 4 363 # define CONFIG_SYS_ATMEL_TOTALSECT 11 364 # define CONFIG_SYS_ATMEL_SECT {1, 2, 1, 7} 365 # define CONFIG_SYS_ATMEL_SECTSZ {0x4000, 0x2000, 0x8000, 0x10000} 366 #endif 367 #endif 368 369 /* 370 * This is setting for JFFS2 support in u-boot. 371 * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support. 372 */ 373 #ifdef CONFIG_CMD_JFFS2 374 #ifdef CF_STMICRO_BOOT 375 # define CONFIG_JFFS2_DEV "nor1" 376 # define CONFIG_JFFS2_PART_SIZE 0x01000000 377 # define CONFIG_JFFS2_PART_OFFSET (CONFIG_SYS_FLASH2_BASE + 0x500000) 378 #endif 379 #ifdef CONFIG_SYS_ATMEL_BOOT 380 # define CONFIG_JFFS2_DEV "nor1" 381 # define CONFIG_JFFS2_PART_SIZE 0x01000000 382 # define CONFIG_JFFS2_PART_OFFSET (CONFIG_SYS_FLASH1_BASE + 0x500000) 383 #endif 384 #ifdef CONFIG_SYS_INTEL_BOOT 385 # define CONFIG_JFFS2_DEV "nor0" 386 # define CONFIG_JFFS2_PART_SIZE (0x01000000 - 0x500000) 387 # define CONFIG_JFFS2_PART_OFFSET (CONFIG_SYS_FLASH0_BASE + 0x500000) 388 #endif 389 #endif 390 391 /*----------------------------------------------------------------------- 392 * Cache Configuration 393 */ 394 #define CONFIG_SYS_CACHELINE_SIZE 16 395 396 #define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ 397 CONFIG_SYS_INIT_RAM_SIZE - 8) 398 #define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ 399 CONFIG_SYS_INIT_RAM_SIZE - 4) 400 #define CONFIG_SYS_ICACHE_INV (CF_CACR_BCINVA + CF_CACR_ICINVA) 401 #define CONFIG_SYS_DCACHE_INV (CF_CACR_DCINVA) 402 #define CONFIG_SYS_CACHE_ACR2 (CONFIG_SYS_SDRAM_BASE | \ 403 CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ 404 CF_ACR_EN | CF_ACR_SM_ALL) 405 #define CONFIG_SYS_CACHE_ICACR (CF_CACR_BEC | CF_CACR_IEC | \ 406 CF_CACR_ICINVA | CF_CACR_EUSP) 407 #define CONFIG_SYS_CACHE_DCACR ((CONFIG_SYS_CACHE_ICACR | \ 408 CF_CACR_DEC | CF_CACR_DDCM_P | \ 409 CF_CACR_DCINVA) & ~CF_CACR_ICINVA) 410 411 /*----------------------------------------------------------------------- 412 * Memory bank definitions 413 */ 414 /* 415 * CS0 - NOR Flash 1, 2, 4, or 8MB 416 * CS1 - CompactFlash and registers 417 * CS2 - CPLD 418 * CS3 - FPGA 419 * CS4 - Available 420 * CS5 - Available 421 */ 422 423 #if defined(CONFIG_SYS_ATMEL_BOOT) || defined(CONFIG_SYS_STMICRO_BOOT) 424 /* Atmel Flash */ 425 #define CONFIG_SYS_CS0_BASE 0x04000000 426 #define CONFIG_SYS_CS0_MASK 0x00070001 427 #define CONFIG_SYS_CS0_CTRL 0x00001140 428 /* Intel Flash */ 429 #define CONFIG_SYS_CS1_BASE 0x00000000 430 #define CONFIG_SYS_CS1_MASK 0x01FF0001 431 #define CONFIG_SYS_CS1_CTRL 0x00000D60 432 433 #define CONFIG_SYS_ATMEL_BASE CONFIG_SYS_CS0_BASE 434 #else 435 /* Intel Flash */ 436 #define CONFIG_SYS_CS0_BASE 0x00000000 437 #define CONFIG_SYS_CS0_MASK 0x01FF0001 438 #define CONFIG_SYS_CS0_CTRL 0x00000D60 439 /* Atmel Flash */ 440 #define CONFIG_SYS_CS1_BASE 0x04000000 441 #define CONFIG_SYS_CS1_MASK 0x00070001 442 #define CONFIG_SYS_CS1_CTRL 0x00001140 443 444 #define CONFIG_SYS_ATMEL_BASE CONFIG_SYS_CS1_BASE 445 #endif 446 447 /* CPLD */ 448 #define CONFIG_SYS_CS2_BASE 0x08000000 449 #define CONFIG_SYS_CS2_MASK 0x00070001 450 #define CONFIG_SYS_CS2_CTRL 0x003f1140 451 452 /* FPGA */ 453 #define CONFIG_SYS_CS3_BASE 0x09000000 454 #define CONFIG_SYS_CS3_MASK 0x00070001 455 #define CONFIG_SYS_CS3_CTRL 0x00000020 456 457 #endif /* _M54455EVB_H */ 458