1 /* 2 * Configuation settings for the Freescale MCF54455 EVB board. 3 * 4 * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. 5 * TsiChung Liew (Tsi-Chung.Liew@freescale.com) 6 * 7 * See file CREDITS for list of people who contributed to this 8 * project. 9 * 10 * This program is free software; you can redistribute it and/or 11 * modify it under the terms of the GNU General Public License as 12 * published by the Free Software Foundation; either version 2 of 13 * the License, or (at your option) any later version. 14 * 15 * This program is distributed in the hope that it will be useful, 16 * but WITHOUT ANY WARRANTY; without even the implied warranty of 17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 18 * GNU General Public License for more details. 19 * 20 * You should have received a copy of the GNU General Public License 21 * along with this program; if not, write to the Free Software 22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 23 * MA 02111-1307 USA 24 */ 25 26 /* 27 * board/config.h - configuration options, board specific 28 */ 29 30 #ifndef _M54455EVB_H 31 #define _M54455EVB_H 32 33 /* 34 * High Level Configuration Options 35 * (easy to change) 36 */ 37 #define CONFIG_MCF5445x /* define processor family */ 38 #define CONFIG_M54455 /* define processor type */ 39 #define CONFIG_M54455EVB /* M54455EVB board */ 40 41 #undef DEBUG 42 43 #define CONFIG_MCFUART 44 #define CFG_UART_PORT (0) 45 #define CONFIG_BAUDRATE 115200 46 #define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } 47 48 #undef CONFIG_WATCHDOG 49 50 #define CONFIG_TIMESTAMP /* Print image info with timestamp */ 51 52 /* 53 * BOOTP options 54 */ 55 #define CONFIG_BOOTP_BOOTFILESIZE 56 #define CONFIG_BOOTP_BOOTPATH 57 #define CONFIG_BOOTP_GATEWAY 58 #define CONFIG_BOOTP_HOSTNAME 59 60 /* Command line configuration */ 61 #include <config_cmd_default.h> 62 63 #define CONFIG_CMD_BOOTD 64 #define CONFIG_CMD_CACHE 65 #define CONFIG_CMD_DATE 66 #define CONFIG_CMD_DHCP 67 #define CONFIG_CMD_ELF 68 #define CONFIG_CMD_EXT2 69 #define CONFIG_CMD_FAT 70 #define CONFIG_CMD_FLASH 71 #define CONFIG_CMD_I2C 72 #define CONFIG_CMD_IDE 73 #define CONFIG_CMD_JFFS2 74 #define CONFIG_CMD_MEMORY 75 #define CONFIG_CMD_MISC 76 #define CONFIG_CMD_MII 77 #define CONFIG_CMD_NET 78 #undef CONFIG_CMD_PCI 79 #define CONFIG_CMD_PING 80 #define CONFIG_CMD_REGINFO 81 82 #undef CONFIG_CMD_LOADB 83 #undef CONFIG_CMD_LOADS 84 85 /* Network configuration */ 86 #define CONFIG_MCFFEC 87 #ifdef CONFIG_MCFFEC 88 # define CONFIG_NET_MULTI 1 89 # define CONFIG_MII 1 90 # define CONFIG_CF_DOMII 91 # define CFG_DISCOVER_PHY 92 # define CFG_RX_ETH_BUFFER 8 93 # define CFG_FAULT_ECHO_LINK_DOWN 94 95 # define CFG_FEC0_PINMUX 0 96 # define CFG_FEC1_PINMUX 0 97 # define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE 98 # define CFG_FEC1_MIIBASE CFG_FEC0_IOBASE 99 # define MCFFEC_TOUT_LOOP 50000 100 # define CONFIG_HAS_ETH1 101 102 # define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */ 103 # define CONFIG_BOOTARGS "root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=physmap-flash.0:5M(kernel)ro,-(jffs2)" 104 # define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 105 # define CONFIG_ETH1ADDR 00:e0:0c:bc:e5:61 106 # define CONFIG_ETHPRIME "FEC0" 107 # define CONFIG_IPADDR 192.162.1.2 108 # define CONFIG_NETMASK 255.255.255.0 109 # define CONFIG_SERVERIP 192.162.1.1 110 # define CONFIG_GATEWAYIP 192.162.1.1 111 # define CONFIG_OVERWRITE_ETHADDR_ONCE 112 113 /* If CFG_DISCOVER_PHY is not defined - hardcoded */ 114 # ifndef CFG_DISCOVER_PHY 115 # define FECDUPLEX FULL 116 # define FECSPEED _100BASET 117 # else 118 # ifndef CFG_FAULT_ECHO_LINK_DOWN 119 # define CFG_FAULT_ECHO_LINK_DOWN 120 # endif 121 # endif /* CFG_DISCOVER_PHY */ 122 #endif 123 124 #define CONFIG_HOSTNAME M54455EVB 125 #define CONFIG_EXTRA_ENV_SETTINGS \ 126 "netdev=eth0\0" \ 127 "inpclk=" MK_STR(CFG_INPUT_CLKSRC) "\0" \ 128 "loadaddr=40010000\0" \ 129 "u-boot=u-boot.bin\0" \ 130 "load=tftp ${loadaddr) ${u-boot}\0" \ 131 "upd=run load; run prog\0" \ 132 "prog=prot off 4000000 402ffff;" \ 133 "era 4000000 402ffff;" \ 134 "cp.b ${loadaddr} 0 ${filesize};" \ 135 "save\0" \ 136 "" 137 138 /* ATA configuration */ 139 #define CONFIG_ISO_PARTITION 140 #define CONFIG_DOS_PARTITION 141 #define CONFIG_IDE_RESET 1 142 #define CONFIG_IDE_PREINIT 1 143 #define CONFIG_ATAPI 144 #undef CONFIG_LBA48 145 146 #define CFG_IDE_MAXBUS 1 147 #define CFG_IDE_MAXDEVICE 2 148 149 #define CFG_ATA_BASE_ADDR 0x90000000 150 #define CFG_ATA_IDE0_OFFSET 0 151 152 #define CFG_ATA_DATA_OFFSET 0xA0 /* Offset for data I/O */ 153 #define CFG_ATA_REG_OFFSET 0xA0 /* Offset for normal register accesses */ 154 #define CFG_ATA_ALT_OFFSET 0xC0 /* Offset for alternate registers */ 155 #define CFG_ATA_STRIDE 4 /* Interval between registers */ 156 #define _IO_BASE 0 157 158 /* Realtime clock */ 159 #define CONFIG_MCFRTC 160 #undef RTC_DEBUG 161 #define CFG_RTC_OSCILLATOR (32 * CFG_HZ) 162 163 /* Timer */ 164 #define CONFIG_MCFTMR 165 #undef CONFIG_MCFPIT 166 167 /* I2c */ 168 #define CONFIG_FSL_I2C 169 #define CONFIG_HARD_I2C /* I2C with hardware support */ 170 #undef CONFIG_SOFT_I2C /* I2C bit-banged */ 171 #define CFG_I2C_SPEED 80000 /* I2C speed and slave address */ 172 #define CFG_I2C_SLAVE 0x7F 173 #define CFG_I2C_OFFSET 0x58000 174 #define CFG_IMMR CFG_MBAR 175 176 /* PCI */ 177 #ifdef CONFIG_CMD_PCI 178 #define CONFIG_PCI 1 179 180 #define CFG_PCI_MEM_BUS 0xA0000000 181 #define CFG_PCI_MEM_PHYS CFG_PCI_MEM_BUS 182 #define CFG_PCI_MEM_SIZE 0x10000000 183 184 #define CFG_PCI_IO_BUS 0xB1000000 185 #define CFG_PCI_IO_PHYS CFG_PCI_IO_BUS 186 #define CFG_PCI_IO_SIZE 0x01000000 187 188 #define CFG_PCI_CFG_BUS 0xB0000000 189 #define CFG_PCI_CFG_PHYS CFG_PCI_CFG_BUS 190 #define CFG_PCI_CFG_SIZE 0x01000000 191 #endif 192 193 /* FPGA - Spartan 2 */ 194 /* experiment 195 #define CONFIG_FPGA CFG_SPARTAN3 196 #define CONFIG_FPGA_COUNT 1 197 #define CFG_FPGA_PROG_FEEDBACK 198 #define CFG_FPGA_CHECK_CTRLC 199 */ 200 201 /* Input, PCI, Flexbus, and VCO */ 202 #define CONFIG_EXTRA_CLOCK 203 204 #define CONFIG_PRAM 512 /* 512 KB */ 205 206 #define CFG_PROMPT "-> " 207 #define CFG_LONGHELP /* undef to save memory */ 208 209 #if defined(CONFIG_CMD_KGDB) 210 #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ 211 #else 212 #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ 213 #endif 214 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ 215 #define CFG_MAXARGS 16 /* max number of command args */ 216 #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ 217 218 #define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x10000) 219 220 #define CFG_HZ 1000 221 222 #define CFG_MBAR 0xFC000000 223 224 /* 225 * Low Level Configuration Settings 226 * (address mappings, register initial values, etc.) 227 * You should know what you are doing if you make changes here. 228 */ 229 230 /*----------------------------------------------------------------------- 231 * Definitions for initial stack pointer and data area (in DPRAM) 232 */ 233 #define CFG_INIT_RAM_ADDR 0x80000000 234 #define CFG_INIT_RAM_END 0x8000 /* End of used area in internal SRAM */ 235 #define CFG_INIT_RAM_CTRL 0x221 236 #define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ 237 #define CFG_GBL_DATA_OFFSET ((CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) - 16) 238 #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET 239 240 /*----------------------------------------------------------------------- 241 * Start addresses for the final memory configuration 242 * (Set up by the startup code) 243 * Please note that CFG_SDRAM_BASE _must_ start at 0 244 */ 245 #define CFG_SDRAM_BASE 0x40000000 246 #define CFG_SDRAM_BASE1 0x48000000 247 #define CFG_SDRAM_SIZE 256 /* SDRAM size in MB */ 248 #define CFG_SDRAM_CFG1 0x65311610 249 #define CFG_SDRAM_CFG2 0x59670000 250 #define CFG_SDRAM_CTRL 0xEA0B2000 251 #define CFG_SDRAM_EMOD 0x40010000 252 #define CFG_SDRAM_MODE 0x00010033 253 254 #define CFG_MEMTEST_START CFG_SDRAM_BASE + 0x400 255 #define CFG_MEMTEST_END ((CFG_SDRAM_SIZE - 3) << 20) 256 257 #define CFG_MONITOR_BASE (CFG_FLASH_BASE + 0x400) 258 #define CFG_BOOTPARAMS_LEN 64*1024 259 #define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ 260 #define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ 261 262 /* 263 * For booting Linux, the board info and command line data 264 * have to be in the first 8 MB of memory, since this is 265 * the maximum mapped by the Linux kernel during initialization ?? 266 */ 267 /* Initial Memory map for Linux */ 268 #define CFG_BOOTMAPSZ (CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20)) 269 270 /* Configuration for environment 271 * Environment is embedded in u-boot in the second sector of the flash 272 */ 273 #define CFG_ENV_IS_IN_FLASH 1 274 #define CONFIG_ENV_OVERWRITE 1 275 #undef CFG_ENV_IS_EMBEDDED 276 277 /*----------------------------------------------------------------------- 278 * FLASH organization 279 */ 280 #ifdef CFG_ATMEL_BOOT 281 # define CFG_FLASH_BASE CFG_CS0_BASE 282 # define CFG_FLASH0_BASE CFG_CS0_BASE 283 # define CFG_FLASH1_BASE CFG_CS1_BASE 284 # define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x4000) 285 # define CFG_ENV_SECT_SIZE 0x2000 286 #else 287 # define CFG_FLASH_BASE CFG_FLASH0_BASE 288 # define CFG_FLASH0_BASE CFG_CS1_BASE 289 # define CFG_FLASH1_BASE CFG_CS0_BASE 290 # define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x60000) 291 # define CFG_ENV_SECT_SIZE 0x20000 292 #endif 293 294 /* M54455EVB has one non CFI flash, defined CFG_FLASH_CFI will cause the system 295 /* M54455EVB has one non CFI flash, defined CFG_FLASH_CFI will cause the system 296 keep reset. */ 297 #undef CFG_FLASH_CFI 298 #ifdef CFG_FLASH_CFI 299 300 # define CFG_FLASH_CFI_DRIVER 1 301 # define CFG_FLASH_SIZE 0x1000000 /* Max size that the board might have */ 302 # define CFG_FLASH_CFI_WIDTH FLASH_CFI_8BIT 303 # define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ 304 # define CFG_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ 305 # define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ 306 # define CFG_FLASH_CHECKSUM 307 # define CFG_FLASH_BANKS_LIST { CFG_CS0_BASE, CFG_CS1_BASE } 308 309 #else 310 311 # define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ 312 313 # define CFG_ATMEL_REGION 4 314 # define CFG_ATMEL_TOTALSECT 11 315 # define CFG_ATMEL_SECT {1, 2, 1, 7} 316 # define CFG_ATMEL_SECTSZ {0x4000, 0x2000, 0x8000, 0x10000} 317 # define CFG_INTEL_SECT 137 318 319 /* max number of sectors on one chip */ 320 # define CFG_MAX_FLASH_SECT (CFG_ATMEL_TOTALSECT + CFG_INTEL_SECT) 321 # define CFG_FLASH_ERASE_TOUT 2000 /* Atmel needs longer timeout */ 322 # define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ 323 # define CFG_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */ 324 # define CFG_FLASH_UNLOCK_TOUT 100 /* Timeout for Flash Clear Lock Bits (in ms) */ 325 # define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ 326 # define CFG_FLASH_CHECKSUM 327 328 #endif 329 330 /* 331 * This is setting for JFFS2 support in u-boot. 332 * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support. 333 */ 334 #ifdef CFG_ATMEL_BOOT 335 # define CONFIG_JFFS2_DEV "nor1" 336 # define CONFIG_JFFS2_PART_SIZE 0x01000000 337 # define CONFIG_JFFS2_PART_OFFSET (CFG_FLASH1_BASE + 0x500000) 338 #else 339 # define CONFIG_JFFS2_DEV "nor0" 340 # define CONFIG_JFFS2_PART_SIZE (0x01000000 - 0x500000) 341 # define CONFIG_JFFS2_PART_OFFSET (CFG_FLASH0_BASE + 0x500000) 342 #endif 343 344 /*----------------------------------------------------------------------- 345 * Cache Configuration 346 */ 347 #define CFG_CACHELINE_SIZE 16 348 349 /*----------------------------------------------------------------------- 350 * Memory bank definitions 351 */ 352 /* 353 * CS0 - NOR Flash 1, 2, 4, or 8MB 354 * CS1 - CompactFlash and registers 355 * CS2 - CPLD 356 * CS3 - FPGA 357 * CS4 - Available 358 * CS5 - Available 359 */ 360 361 #ifdef CFG_ATMEL_BOOT 362 /* Atmel Flash */ 363 #define CFG_CS0_BASE 0x04000000 364 #define CFG_CS0_MASK 0x00070001 365 #define CFG_CS0_CTRL 0x00001140 366 /* Intel Flash */ 367 #define CFG_CS1_BASE 0x00000000 368 #define CFG_CS1_MASK 0x01FF0001 369 #define CFG_CS1_CTRL 0x00000D60 370 371 #define CFG_ATMEL_BASE CFG_CS0_BASE 372 #else 373 /* Intel Flash */ 374 #define CFG_CS0_BASE 0x00000000 375 #define CFG_CS0_MASK 0x01FF0001 376 #define CFG_CS0_CTRL 0x00000D60 377 /* Atmel Flash */ 378 #define CFG_CS1_BASE 0x04000000 379 #define CFG_CS1_MASK 0x00070001 380 #define CFG_CS1_CTRL 0x00001140 381 382 #define CFG_ATMEL_BASE CFG_CS1_BASE 383 #endif 384 385 /* CPLD */ 386 #define CFG_CS2_BASE 0x08000000 387 #define CFG_CS2_MASK 0x00070001 388 #define CFG_CS2_CTRL 0x003f1140 389 390 /* FPGA */ 391 #define CFG_CS3_BASE 0x09000000 392 #define CFG_CS3_MASK 0x00070001 393 #define CFG_CS3_CTRL 0x00000020 394 395 #endif /* _M54455EVB_H */ 396