xref: /openbmc/u-boot/include/configs/M5329EVB.h (revision 415a613b)
1 /*
2  * Configuation settings for the Freescale MCF5329 FireEngine board.
3  *
4  * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
5  * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
6  *
7  * See file CREDITS for list of people who contributed to this
8  * project.
9  *
10  * This program is free software; you can redistribute it and/or
11  * modify it under the terms of the GNU General Public License as
12  * published by the Free Software Foundation; either version 2 of
13  * the License, or (at your option) any later version.
14  *
15  * This program is distributed in the hope that it will be useful,
16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
18  * GNU General Public License for more details.
19  *
20  * You should have received a copy of the GNU General Public License
21  * along with this program; if not, write to the Free Software
22  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
23  * MA 02111-1307 USA
24  */
25 
26 /*
27  * board/config.h - configuration options, board specific
28  */
29 
30 #ifndef _M5329EVB_H
31 #define _M5329EVB_H
32 
33 /*
34  * High Level Configuration Options
35  * (easy to change)
36  */
37 #define CONFIG_MCF532x		/* define processor family */
38 #define CONFIG_M5329		/* define processor type */
39 
40 #undef DEBUG
41 
42 #define CONFIG_MCFUART
43 #define CFG_UART_PORT		(0)
44 #define CONFIG_BAUDRATE		115200
45 #define CFG_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }
46 
47 #undef CONFIG_WATCHDOG
48 #define CONFIG_WATCHDOG_TIMEOUT	5000	/* timeout in milliseconds, max timeout is 6.71sec */
49 
50 /* Command line configuration */
51 #include <config_cmd_default.h>
52 
53 #define CONFIG_CMD_CACHE
54 #define CONFIG_CMD_DATE
55 #define CONFIG_CMD_ELF
56 #define CONFIG_CMD_FLASH
57 #define CONFIG_CMD_I2C
58 #define CONFIG_CMD_MEMORY
59 #define CONFIG_CMD_MISC
60 #define CONFIG_CMD_MII
61 #define CONFIG_CMD_NET
62 #define CONFIG_CMD_PING
63 #define CONFIG_CMD_REGINFO
64 
65 #ifdef NANDFLASH_SIZE
66 #      define CONFIG_CMD_NAND
67 #endif
68 
69 #define CFG_UNIFY_CACHE
70 
71 #define CONFIG_MCFFEC
72 #ifdef CONFIG_MCFFEC
73 #	define CONFIG_NET_MULTI		1
74 #	define CONFIG_MII		1
75 #	define CFG_DISCOVER_PHY
76 #	define CFG_RX_ETH_BUFFER	8
77 #	define CFG_FAULT_ECHO_LINK_DOWN
78 
79 #	define CFG_FEC0_PINMUX		0
80 #	define CFG_FEC0_MIIBASE		CFG_FEC0_IOBASE
81 #	define MCFFEC_TOUT_LOOP 	50000
82 /* If CFG_DISCOVER_PHY is not defined - hardcoded */
83 #	ifndef CFG_DISCOVER_PHY
84 #		define FECDUPLEX	FULL
85 #		define FECSPEED		_100BASET
86 #	else
87 #		ifndef CFG_FAULT_ECHO_LINK_DOWN
88 #			define CFG_FAULT_ECHO_LINK_DOWN
89 #		endif
90 #	endif			/* CFG_DISCOVER_PHY */
91 #endif
92 
93 #define CONFIG_MCFRTC
94 #undef RTC_DEBUG
95 
96 /* Timer */
97 #define CONFIG_MCFTMR
98 #undef CONFIG_MCFPIT
99 
100 /* I2C */
101 #define CONFIG_FSL_I2C
102 #define CONFIG_HARD_I2C			/* I2C with hw support */
103 #undef CONFIG_SOFT_I2C			/* I2C bit-banged */
104 #define CFG_I2C_SPEED		80000
105 #define CFG_I2C_SLAVE		0x7F
106 #define CFG_I2C_OFFSET		0x58000
107 #define CFG_IMMR		CFG_MBAR
108 
109 #define CONFIG_BOOTDELAY	1	/* autoboot after 5 seconds */
110 #define CONFIG_UDP_CHECKSUM
111 
112 #ifdef CONFIG_MCFFEC
113 #	define CONFIG_ETHADDR	00:e0:0c:bc:e5:60
114 #	define CONFIG_IPADDR	192.162.1.2
115 #	define CONFIG_NETMASK	255.255.255.0
116 #	define CONFIG_SERVERIP	192.162.1.1
117 #	define CONFIG_GATEWAYIP	192.162.1.1
118 #	define CONFIG_OVERWRITE_ETHADDR_ONCE
119 #endif				/* FEC_ENET */
120 
121 #define CONFIG_HOSTNAME		M5329EVB
122 #define CONFIG_EXTRA_ENV_SETTINGS					\
123 	"netdev=eth0\0"			\
124 	"loadaddr=40010000\0"	\
125 	"u-boot=u-boot.bin\0"	\
126 	"load=tftp ${loadaddr) ${u-boot}\0"	\
127 	"upd=run load; run prog\0"	\
128 	"prog=prot off 0 2ffff;"	\
129 	"era 0 2ffff;"	\
130 	"cp.b ${loadaddr} 0 ${filesize};"	\
131 	"save\0"	\
132 	""
133 
134 #define CONFIG_PRAM		512	/* 512 KB */
135 #define CFG_PROMPT		"-> "
136 #define CFG_LONGHELP		/* undef to save memory */
137 
138 #ifdef CONFIG_CMD_KGDB
139 #	define CFG_CBSIZE	1024	/* Console I/O Buffer Size */
140 #else
141 #	define CFG_CBSIZE	256	/* Console I/O Buffer Size */
142 #endif
143 
144 #define CFG_PBSIZE			(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
145 #define CFG_MAXARGS		16	/* max number of command args */
146 #define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size    */
147 #define CFG_LOAD_ADDR		0x40010000
148 
149 #define CFG_HZ			1000
150 #define CFG_CLK			80000000
151 #define CFG_CPU_CLK		CFG_CLK * 3
152 
153 #define CFG_MBAR		0xFC000000
154 
155 #define CFG_LATCH_ADDR		(CFG_CS1_BASE + 0x80000)
156 
157 /*
158  * Low Level Configuration Settings
159  * (address mappings, register initial values, etc.)
160  * You should know what you are doing if you make changes here.
161  */
162 /*-----------------------------------------------------------------------
163  * Definitions for initial stack pointer and data area (in DPRAM)
164  */
165 #define CFG_INIT_RAM_ADDR	0x80000000
166 #define CFG_INIT_RAM_END	0x8000	/* End of used area in internal SRAM */
167 #define CFG_INIT_RAM_CTRL	0x221
168 #define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
169 #define CFG_GBL_DATA_OFFSET	((CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) - 0x10)
170 #define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
171 
172 /*-----------------------------------------------------------------------
173  * Start addresses for the final memory configuration
174  * (Set up by the startup code)
175  * Please note that CFG_SDRAM_BASE _must_ start at 0
176  */
177 #define CFG_SDRAM_BASE		0x40000000
178 #define CFG_SDRAM_SIZE		32	/* SDRAM size in MB */
179 #define CFG_SDRAM_CFG1		0x53722730
180 #define CFG_SDRAM_CFG2		0x56670000
181 #define CFG_SDRAM_CTRL		0xE1092000
182 #define CFG_SDRAM_EMOD		0x40010000
183 #define CFG_SDRAM_MODE		0x018D0000
184 
185 #define CFG_MEMTEST_START	CFG_SDRAM_BASE + 0x400
186 #define CFG_MEMTEST_END		((CFG_SDRAM_SIZE - 3) << 20)
187 
188 #define CFG_MONITOR_BASE	(CFG_FLASH_BASE + 0x400)
189 #define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
190 
191 #define CFG_BOOTPARAMS_LEN	64*1024
192 #define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc() */
193 
194 /*
195  * For booting Linux, the board info and command line data
196  * have to be in the first 8 MB of memory, since this is
197  * the maximum mapped by the Linux kernel during initialization ??
198  */
199 #define CFG_BOOTMAPSZ		(CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20))
200 
201 /*-----------------------------------------------------------------------
202  * FLASH organization
203  */
204 #define CFG_FLASH_CFI
205 #ifdef CFG_FLASH_CFI
206 #	define CFG_FLASH_CFI_DRIVER	1
207 #	define CFG_FLASH_SIZE		0x800000	/* Max size that the board might have */
208 #	define CFG_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
209 #	define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
210 #	define CFG_MAX_FLASH_SECT	137	/* max number of sectors on one chip */
211 #	define CFG_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
212 #endif
213 
214 #ifdef NANDFLASH_SIZE
215 #	define CFG_MAX_NAND_DEVICE	1
216 #	define CFG_NAND_BASE		(CFG_CS2_BASE << 16)
217 #	define CFG_NAND_SIZE		1
218 #	define CFG_NAND_BASE_LIST	{ CFG_NAND_BASE }
219 #	define NAND_MAX_CHIPS		1
220 #	define NAND_ALLOW_ERASE_ALL	1
221 #	define CONFIG_JFFS2_NAND	1
222 #	define CONFIG_JFFS2_DEV		"nand0"
223 #	define CONFIG_JFFS2_PART_SIZE	(CFG_CS2_MASK & ~1)
224 #	define CONFIG_JFFS2_PART_OFFSET	0x00000000
225 #endif
226 
227 #define CFG_FLASH_BASE		(CFG_CS0_BASE << 16)
228 
229 /* Configuration for environment
230  * Environment is embedded in u-boot in the second sector of the flash
231  */
232 #define CFG_ENV_OFFSET		0x4000
233 #define CFG_ENV_SECT_SIZE	0x2000
234 #define CFG_ENV_IS_IN_FLASH	1
235 #define CFG_ENV_IS_EMBEDDED	1
236 
237 /*-----------------------------------------------------------------------
238  * Cache Configuration
239  */
240 #define CFG_CACHELINE_SIZE	16
241 
242 /*-----------------------------------------------------------------------
243  * Chipselect bank definitions
244  */
245 /*
246  * CS0 - NOR Flash 1, 2, 4, or 8MB
247  * CS1 - CompactFlash and registers
248  * CS2 - NAND Flash 16, 32, or 64MB
249  * CS3 - Available
250  * CS4 - Available
251  * CS5 - Available
252  */
253 #define CFG_CS0_BASE		0
254 #define CFG_CS0_MASK		0x007f0001
255 #define CFG_CS0_CTRL		0x00001fa0
256 
257 #define CFG_CS1_BASE		0x1000
258 #define CFG_CS1_MASK		0x001f0001
259 #define CFG_CS1_CTRL		0x002A3780
260 
261 #ifdef NANDFLASH_SIZE
262 #define CFG_CS2_BASE		0x2000
263 #define CFG_CS2_MASK		((NANDFLASH_SIZE << 20) | 1)
264 #define CFG_CS2_CTRL		0x00001f60
265 #endif
266 
267 #endif				/* _M5329EVB_H */
268