1 /* 2 * Configuation settings for the Freescale MCF53017EVB. 3 * 4 * Copyright (C) 2004-2008 Freescale Semiconductor, Inc. 5 * TsiChung Liew (Tsi-Chung.Liew@freescale.com) 6 * 7 * See file CREDITS for list of people who contributed to this 8 * project. 9 * 10 * This program is free software; you can redistribute it and/or 11 * modify it under the terms of the GNU General Public License as 12 * published by the Free Software Foundation; either version 2 of 13 * the License, or (at your option) any later version. 14 * 15 * This program is distributed in the hope that it will be useful, 16 * but WITHOUT ANY WARRANTY; without even the implied warranty of 17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 18 * GNU General Public License for more details. 19 * 20 * You should have received a copy of the GNU General Public License 21 * along with this program; if not, write to the Free Software 22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 23 * MA 02111-1307 USA 24 */ 25 26 /* 27 * board/config.h - configuration options, board specific 28 */ 29 30 #ifndef _M53017EVB_H 31 #define _M53017EVB_H 32 33 /* 34 * High Level Configuration Options 35 * (easy to change) 36 */ 37 #define CONFIG_MCF5301x /* define processor family */ 38 #define CONFIG_M53015 /* define processor type */ 39 40 #define CONFIG_MCFUART 41 #define CONFIG_SYS_UART_PORT (0) 42 #define CONFIG_BAUDRATE 115200 43 #define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } 44 45 #undef CONFIG_WATCHDOG 46 #define CONFIG_WATCHDOG_TIMEOUT 5000 47 48 /* Command line configuration */ 49 #include <config_cmd_default.h> 50 51 #define CONFIG_CMD_CACHE 52 #define CONFIG_CMD_DATE 53 #define CONFIG_CMD_ELF 54 #define CONFIG_CMD_FLASH 55 #undef CONFIG_CMD_I2C 56 #define CONFIG_CMD_MEMORY 57 #define CONFIG_CMD_MISC 58 #define CONFIG_CMD_MII 59 #define CONFIG_CMD_NET 60 #define CONFIG_CMD_PING 61 #define CONFIG_CMD_REGINFO 62 63 #define CONFIG_SYS_UNIFY_CACHE 64 65 #define CONFIG_MCFFEC 66 #ifdef CONFIG_MCFFEC 67 # define CONFIG_NET_MULTI 1 68 # define CONFIG_MII 1 69 # define CONFIG_MII_INIT 1 70 # define CONFIG_SYS_DISCOVER_PHY 71 # define CONFIG_SYS_RX_ETH_BUFFER 8 72 # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 73 # define CONFIG_HAS_ETH1 74 75 # define CONFIG_SYS_FEC0_PINMUX 0 76 # define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE 77 # define CONFIG_SYS_FEC1_PINMUX 0 78 # define CONFIG_SYS_FEC1_MIIBASE CONFIG_SYS_FEC1_IOBASE 79 # define MCFFEC_TOUT_LOOP 50000 80 /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */ 81 # ifndef CONFIG_SYS_DISCOVER_PHY 82 # define FECDUPLEX FULL 83 # define FECSPEED _100BASET 84 # else 85 # ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN 86 # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 87 # endif 88 # endif /* CONFIG_SYS_DISCOVER_PHY */ 89 #endif 90 91 #define CONFIG_MCFRTC 92 #undef RTC_DEBUG 93 #define CONFIG_SYS_RTC_CNT (0x8000) 94 #define CONFIG_SYS_RTC_SETUP (RTC_OCEN_OSCBYP | RTC_OCEN_CLKEN) 95 96 /* Timer */ 97 #define CONFIG_MCFTMR 98 #undef CONFIG_MCFPIT 99 100 /* I2C */ 101 #define CONFIG_FSL_I2C 102 #define CONFIG_HARD_I2C /* I2C with hw support */ 103 #undef CONFIG_SOFT_I2C /* I2C bit-banged */ 104 #define CONFIG_SYS_I2C_SPEED 80000 105 #define CONFIG_SYS_I2C_SLAVE 0x7F 106 #define CONFIG_SYS_I2C_OFFSET 0x58000 107 #define CONFIG_SYS_IMMR CONFIG_SYS_MBAR 108 109 #define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */ 110 #define CONFIG_UDP_CHECKSUM 111 112 #ifdef CONFIG_MCFFEC 113 # define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 114 # define CONFIG_ETH1ADDR 00:e0:0c:bc:e5:61 115 # define CONFIG_IPADDR 192.162.1.2 116 # define CONFIG_NETMASK 255.255.255.0 117 # define CONFIG_SERVERIP 192.162.1.1 118 # define CONFIG_GATEWAYIP 192.162.1.1 119 # define CONFIG_OVERWRITE_ETHADDR_ONCE 120 #endif /* FEC_ENET */ 121 122 #define CONFIG_HOSTNAME M53017 123 #define CONFIG_EXTRA_ENV_SETTINGS \ 124 "netdev=eth0\0" \ 125 "loadaddr=40010000\0" \ 126 "u-boot=u-boot.bin\0" \ 127 "load=tftp ${loadaddr) ${u-boot}\0" \ 128 "upd=run load; run prog\0" \ 129 "prog=prot off 0 3ffff;" \ 130 "era 0 3ffff;" \ 131 "cp.b ${loadaddr} 0 ${filesize};" \ 132 "save\0" \ 133 "" 134 135 #define CONFIG_PRAM 512 /* 512 KB */ 136 #define CONFIG_SYS_PROMPT "-> " 137 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 138 139 #ifdef CONFIG_CMD_KGDB 140 # define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 141 #else 142 # define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 143 #endif 144 145 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ 146 #define CONFIG_SYS_MAXARGS 16 /* max number of cmd args */ 147 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Arg Buf Sz */ 148 #define CONFIG_SYS_LOAD_ADDR 0x40010000 149 150 #define CONFIG_SYS_HZ 1000 151 #define CONFIG_SYS_CLK 80000000 152 #define CONFIG_SYS_CPU_CLK CONFIG_SYS_CLK * 3 153 154 #define CONFIG_SYS_MBAR 0xFC000000 155 156 /* 157 * Low Level Configuration Settings 158 * (address mappings, register initial values, etc.) 159 * You should know what you are doing if you make changes here. 160 */ 161 /* 162 * Definitions for initial stack pointer and data area (in DPRAM) 163 */ 164 #define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 165 #define CONFIG_SYS_INIT_RAM_END 0x20000 /* End of used area in internal SRAM */ 166 #define CONFIG_SYS_INIT_RAM_CTRL 0x21 167 #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ 168 #define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) - 0x10) 169 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 170 171 /* 172 * Start addresses for the final memory configuration 173 * (Set up by the startup code) 174 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 175 */ 176 #define CONFIG_SYS_SDRAM_BASE 0x40000000 177 #define CONFIG_SYS_SDRAM_SIZE 64 /* SDRAM size in MB */ 178 #define CONFIG_SYS_SDRAM_CFG1 0x43711630 179 #define CONFIG_SYS_SDRAM_CFG2 0x56670000 180 #define CONFIG_SYS_SDRAM_CTRL 0xE1002000 181 #define CONFIG_SYS_SDRAM_EMOD 0x80010000 182 #define CONFIG_SYS_SDRAM_MODE 0x00CD0000 183 184 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE + 0x400 185 #define CONFIG_SYS_MEMTEST_END ((CONFIG_SYS_SDRAM_SIZE - 3) << 20) 186 187 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400) 188 #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ 189 190 #define CONFIG_SYS_BOOTPARAMS_LEN 64*1024 191 #define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ 192 193 /* 194 * For booting Linux, the board info and command line data 195 * have to be in the first 8 MB of memory, since this is 196 * the maximum mapped by the Linux kernel during initialization ?? 197 */ 198 #define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20)) 199 200 /*----------------------------------------------------------------------- 201 * FLASH organization 202 */ 203 #define CONFIG_SYS_FLASH_CFI 204 #ifdef CONFIG_SYS_FLASH_CFI 205 # define CONFIG_FLASH_CFI_DRIVER 1 206 # define CONFIG_SYS_FLASH_SIZE 0x800000 /* Max size that the board might have */ 207 # define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT 208 # define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ 209 # define CONFIG_SYS_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ 210 # define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ 211 #endif 212 213 #define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE 214 215 /* Configuration for environment 216 * Environment is embedded in u-boot in the second sector of the flash 217 */ 218 #define CONFIG_ENV_OFFSET 0x8000 219 #define CONFIG_ENV_SIZE 0x1000 220 #define CONFIG_ENV_SECT_SIZE 0x8000 221 #define CONFIG_ENV_IS_IN_FLASH 1 222 223 /*----------------------------------------------------------------------- 224 * Cache Configuration 225 */ 226 #define CONFIG_SYS_CACHELINE_SIZE 16 227 228 /*----------------------------------------------------------------------- 229 * Chipselect bank definitions 230 */ 231 /* 232 * CS0 - NOR Flash 233 * CS1 - Ext SRAM 234 * CS2 - Available 235 * CS3 - Available 236 * CS4 - Available 237 * CS5 - Available 238 */ 239 #define CONFIG_SYS_CS0_BASE 0 240 #define CONFIG_SYS_CS0_MASK 0x00FF0001 241 #define CONFIG_SYS_CS0_CTRL 0x00001FA0 242 243 #define CONFIG_SYS_CS1_BASE 0xC0000000 244 #define CONFIG_SYS_CS1_MASK 0x00070001 245 #define CONFIG_SYS_CS1_CTRL 0x00001FA0 246 247 #endif /* _M53017EVB_H */ 248