xref: /openbmc/u-boot/include/configs/M53017EVB.h (revision 33b1d3f4)
1 /*
2  * Configuation settings for the Freescale MCF53017EVB.
3  *
4  * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
5  * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
6  *
7  * See file CREDITS for list of people who contributed to this
8  * project.
9  *
10  * This program is free software; you can redistribute it and/or
11  * modify it under the terms of the GNU General Public License as
12  * published by the Free Software Foundation; either version 2 of
13  * the License, or (at your option) any later version.
14  *
15  * This program is distributed in the hope that it will be useful,
16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
18  * GNU General Public License for more details.
19  *
20  * You should have received a copy of the GNU General Public License
21  * along with this program; if not, write to the Free Software
22  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
23  * MA 02111-1307 USA
24  */
25 
26 /*
27  * board/config.h - configuration options, board specific
28  */
29 
30 #ifndef _M53017EVB_H
31 #define _M53017EVB_H
32 
33 /*
34  * High Level Configuration Options
35  * (easy to change)
36  */
37 #define CONFIG_MCF5301x		/* define processor family */
38 #define CONFIG_M53015		/* define processor type */
39 
40 #define CONFIG_MCFUART
41 #define CONFIG_SYS_UART_PORT		(0)
42 #define CONFIG_BAUDRATE			115200
43 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }
44 
45 #undef CONFIG_WATCHDOG
46 #define CONFIG_WATCHDOG_TIMEOUT		5000
47 
48 /* Command line configuration */
49 #include <config_cmd_default.h>
50 
51 #define CONFIG_CMD_CACHE
52 #define CONFIG_CMD_DATE
53 #define CONFIG_CMD_ELF
54 #define CONFIG_CMD_FLASH
55 #undef CONFIG_CMD_I2C
56 #define CONFIG_CMD_MEMORY
57 #define CONFIG_CMD_MISC
58 #define CONFIG_CMD_MII
59 #define CONFIG_CMD_NET
60 #define CONFIG_CMD_PING
61 #define CONFIG_CMD_REGINFO
62 
63 #define CONFIG_SYS_UNIFY_CACHE
64 
65 #define CONFIG_MCFFEC
66 #ifdef CONFIG_MCFFEC
67 #	define CONFIG_NET_MULTI		1
68 #	define CONFIG_MII		1
69 #	define CONFIG_MII_INIT		1
70 #	define CONFIG_SYS_DISCOVER_PHY
71 #	define CONFIG_SYS_RX_ETH_BUFFER	8
72 #	define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
73 #	define CONFIG_HAS_ETH1
74 
75 #	define CONFIG_SYS_FEC0_PINMUX	0
76 #	define CONFIG_SYS_FEC0_MIIBASE	CONFIG_SYS_FEC0_IOBASE
77 #	define CONFIG_SYS_FEC1_PINMUX	0
78 #	define CONFIG_SYS_FEC1_MIIBASE	CONFIG_SYS_FEC1_IOBASE
79 #	define MCFFEC_TOUT_LOOP		50000
80 /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
81 #	ifndef CONFIG_SYS_DISCOVER_PHY
82 #		define FECDUPLEX	FULL
83 #		define FECSPEED		_100BASET
84 #	else
85 #		ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
86 #			define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
87 #		endif
88 #	endif			/* CONFIG_SYS_DISCOVER_PHY */
89 #endif
90 
91 #define CONFIG_MCFRTC
92 #undef RTC_DEBUG
93 #define CONFIG_SYS_RTC_CNT		(0x8000)
94 #define CONFIG_SYS_RTC_SETUP		(RTC_OCEN_OSCBYP | RTC_OCEN_CLKEN)
95 
96 /* Timer */
97 #define CONFIG_MCFTMR
98 #undef CONFIG_MCFPIT
99 
100 /* I2C */
101 #define CONFIG_FSL_I2C
102 #define CONFIG_HARD_I2C			/* I2C with hw support */
103 #undef CONFIG_SOFT_I2C			/* I2C bit-banged */
104 #define CONFIG_SYS_I2C_SPEED		80000
105 #define CONFIG_SYS_I2C_SLAVE		0x7F
106 #define CONFIG_SYS_I2C_OFFSET		0x58000
107 #define CONFIG_SYS_IMMR			CONFIG_SYS_MBAR
108 
109 #define CONFIG_BOOTDELAY		1	/* autoboot after 5 seconds */
110 #define CONFIG_UDP_CHECKSUM
111 
112 #ifdef CONFIG_MCFFEC
113 #	define CONFIG_ETHADDR	00:e0:0c:bc:e5:60
114 #	define CONFIG_ETH1ADDR	00:e0:0c:bc:e5:61
115 #	define CONFIG_IPADDR	192.162.1.2
116 #	define CONFIG_NETMASK	255.255.255.0
117 #	define CONFIG_SERVERIP	192.162.1.1
118 #	define CONFIG_GATEWAYIP	192.162.1.1
119 #	define CONFIG_OVERWRITE_ETHADDR_ONCE
120 #endif				/* FEC_ENET */
121 
122 #define CONFIG_HOSTNAME		M53017
123 #define CONFIG_EXTRA_ENV_SETTINGS		\
124 	"netdev=eth0\0"				\
125 	"loadaddr=40010000\0"			\
126 	"u-boot=u-boot.bin\0"			\
127 	"load=tftp ${loadaddr) ${u-boot}\0"	\
128 	"upd=run load; run prog\0"		\
129 	"prog=prot off 0 3ffff;"		\
130 	"era 0 3ffff;"				\
131 	"cp.b ${loadaddr} 0 ${filesize};"	\
132 	"save\0"				\
133 	""
134 
135 #define CONFIG_PRAM		512	/* 512 KB */
136 #define CONFIG_SYS_PROMPT	"-> "
137 #define CONFIG_SYS_LONGHELP	/* undef to save memory */
138 
139 #ifdef CONFIG_CMD_KGDB
140 #	define CONFIG_SYS_CBSIZE	1024	/* Console I/O Buffer Size */
141 #else
142 #	define CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size */
143 #endif
144 
145 #define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
146 #define CONFIG_SYS_MAXARGS	16		/* max number of cmd args */
147 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Arg Buf Sz */
148 #define CONFIG_SYS_LOAD_ADDR	0x40010000
149 
150 #define CONFIG_SYS_HZ		1000
151 #define CONFIG_SYS_CLK		80000000
152 #define CONFIG_SYS_CPU_CLK	CONFIG_SYS_CLK * 3
153 
154 #define CONFIG_SYS_MBAR		0xFC000000
155 
156 /*
157  * Low Level Configuration Settings
158  * (address mappings, register initial values, etc.)
159  * You should know what you are doing if you make changes here.
160  */
161 /*
162  * Definitions for initial stack pointer and data area (in DPRAM)
163  */
164 #define CONFIG_SYS_INIT_RAM_ADDR	0x80000000
165 #define CONFIG_SYS_INIT_RAM_END		0x20000	/* End of used area in internal SRAM */
166 #define CONFIG_SYS_INIT_RAM_CTRL	0x21
167 #define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
168 #define CONFIG_SYS_GBL_DATA_OFFSET	((CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) - 0x10)
169 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
170 
171 /*
172  * Start addresses for the final memory configuration
173  * (Set up by the startup code)
174  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
175  */
176 #define CONFIG_SYS_SDRAM_BASE		0x40000000
177 #define CONFIG_SYS_SDRAM_SIZE		64	/* SDRAM size in MB */
178 #define CONFIG_SYS_SDRAM_CFG1		0x43711630
179 #define CONFIG_SYS_SDRAM_CFG2		0x56670000
180 #define CONFIG_SYS_SDRAM_CTRL		0xE1002000
181 #define CONFIG_SYS_SDRAM_EMOD		0x80010000
182 #define CONFIG_SYS_SDRAM_MODE		0x00CD0000
183 
184 #define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE + 0x400
185 #define CONFIG_SYS_MEMTEST_END		((CONFIG_SYS_SDRAM_SIZE - 3) << 20)
186 
187 #define CONFIG_SYS_MONITOR_BASE		(CONFIG_SYS_FLASH_BASE + 0x400)
188 #define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
189 
190 #define CONFIG_SYS_BOOTPARAMS_LEN	64*1024
191 #define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc() */
192 
193 /*
194  * For booting Linux, the board info and command line data
195  * have to be in the first 8 MB of memory, since this is
196  * the maximum mapped by the Linux kernel during initialization ??
197  */
198 #define CONFIG_SYS_BOOTMAPSZ		(CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
199 #define CONFIG_SYS_BOOTM_LEN		(CONFIG_SYS_SDRAM_SIZE << 20)
200 
201 /*-----------------------------------------------------------------------
202  * FLASH organization
203  */
204 #define CONFIG_SYS_FLASH_CFI
205 #ifdef CONFIG_SYS_FLASH_CFI
206 #	define CONFIG_FLASH_CFI_DRIVER		1
207 #	define CONFIG_SYS_FLASH_SIZE		0x800000	/* Max size that the board might have */
208 #	define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
209 #	define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
210 #	define CONFIG_SYS_MAX_FLASH_SECT	137	/* max number of sectors on one chip */
211 #	define CONFIG_SYS_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
212 #endif
213 
214 #define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_CS0_BASE
215 
216 /* Configuration for environment
217  * Environment is embedded in u-boot in the second sector of the flash
218  */
219 #define CONFIG_ENV_OFFSET		0x8000
220 #define CONFIG_ENV_SIZE			0x1000
221 #define CONFIG_ENV_SECT_SIZE		0x8000
222 #define CONFIG_ENV_IS_IN_FLASH		1
223 
224 /*-----------------------------------------------------------------------
225  * Cache Configuration
226  */
227 #define CONFIG_SYS_CACHELINE_SIZE	16
228 
229 /*-----------------------------------------------------------------------
230  * Chipselect bank definitions
231  */
232 /*
233  * CS0 - NOR Flash
234  * CS1 - Ext SRAM
235  * CS2 - Available
236  * CS3 - Available
237  * CS4 - Available
238  * CS5 - Available
239  */
240 #define CONFIG_SYS_CS0_BASE		0
241 #define CONFIG_SYS_CS0_MASK		0x00FF0001
242 #define CONFIG_SYS_CS0_CTRL		0x00001FA0
243 
244 #define CONFIG_SYS_CS1_BASE		0xC0000000
245 #define CONFIG_SYS_CS1_MASK		0x00070001
246 #define CONFIG_SYS_CS1_CTRL		0x00001FA0
247 
248 #endif				/* _M53017EVB_H */
249