xref: /openbmc/u-boot/include/configs/M53017EVB.h (revision 0fa1fc43)
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Configuation settings for the Freescale MCF53017EVB.
4  *
5  * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
6  * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
7  */
8 
9 /*
10  * board/config.h - configuration options, board specific
11  */
12 
13 #ifndef _M53017EVB_H
14 #define _M53017EVB_H
15 
16 /*
17  * High Level Configuration Options
18  * (easy to change)
19  */
20 
21 #define CONFIG_MCFUART
22 #define CONFIG_SYS_UART_PORT		(0)
23 
24 #undef CONFIG_WATCHDOG
25 #define CONFIG_WATCHDOG_TIMEOUT		5000
26 
27 #define CONFIG_SYS_UNIFY_CACHE
28 
29 #define CONFIG_MCFFEC
30 #ifdef CONFIG_MCFFEC
31 #	define CONFIG_MII_INIT		1
32 #	define CONFIG_SYS_DISCOVER_PHY
33 #	define CONFIG_SYS_RX_ETH_BUFFER	8
34 #	define CONFIG_SYS_TX_ETH_BUFFER	8
35 #	define CONFIG_SYS_FEC_BUF_USE_SRAM
36 #	define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
37 #	define CONFIG_HAS_ETH1
38 
39 #	define CONFIG_SYS_FEC0_PINMUX	0
40 #	define CONFIG_SYS_FEC0_MIIBASE	CONFIG_SYS_FEC0_IOBASE
41 #	define CONFIG_SYS_FEC1_PINMUX	0
42 #	define CONFIG_SYS_FEC1_MIIBASE	CONFIG_SYS_FEC1_IOBASE
43 #	define MCFFEC_TOUT_LOOP		50000
44 
45 /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
46 #	ifndef CONFIG_SYS_DISCOVER_PHY
47 #		define FECDUPLEX	FULL
48 #		define FECSPEED		_100BASET
49 #	else
50 #		ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
51 #			define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
52 #		endif
53 #	endif			/* CONFIG_SYS_DISCOVER_PHY */
54 #endif
55 
56 #define CONFIG_MCFRTC
57 #undef RTC_DEBUG
58 #define CONFIG_SYS_RTC_CNT		(0x8000)
59 #define CONFIG_SYS_RTC_SETUP		(RTC_OCEN_OSCBYP | RTC_OCEN_CLKEN)
60 
61 /* Timer */
62 #define CONFIG_MCFTMR
63 #undef CONFIG_MCFPIT
64 
65 /* I2C */
66 #define CONFIG_SYS_I2C
67 #define CONFIG_SYS_I2C_FSL
68 #define CONFIG_SYS_FSL_I2C_SPEED	80000
69 #define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
70 #define CONFIG_SYS_FSL_I2C_OFFSET	0x58000
71 #define CONFIG_SYS_IMMR			CONFIG_SYS_MBAR
72 
73 #define CONFIG_UDP_CHECKSUM
74 
75 #ifdef CONFIG_MCFFEC
76 #	define CONFIG_IPADDR	192.162.1.2
77 #	define CONFIG_NETMASK	255.255.255.0
78 #	define CONFIG_SERVERIP	192.162.1.1
79 #	define CONFIG_GATEWAYIP	192.162.1.1
80 #endif				/* FEC_ENET */
81 
82 #define CONFIG_HOSTNAME		"M53017"
83 #define CONFIG_EXTRA_ENV_SETTINGS		\
84 	"netdev=eth0\0"				\
85 	"loadaddr=40010000\0"			\
86 	"u-boot=u-boot.bin\0"			\
87 	"load=tftp ${loadaddr) ${u-boot}\0"	\
88 	"upd=run load; run prog\0"		\
89 	"prog=prot off 0 3ffff;"		\
90 	"era 0 3ffff;"				\
91 	"cp.b ${loadaddr} 0 ${filesize};"	\
92 	"save\0"				\
93 	""
94 
95 #define CONFIG_PRAM		512	/* 512 KB */
96 
97 #define CONFIG_SYS_LOAD_ADDR	0x40010000
98 
99 #define CONFIG_SYS_CLK		80000000
100 #define CONFIG_SYS_CPU_CLK	CONFIG_SYS_CLK * 3
101 
102 #define CONFIG_SYS_MBAR		0xFC000000
103 
104 /*
105  * Low Level Configuration Settings
106  * (address mappings, register initial values, etc.)
107  * You should know what you are doing if you make changes here.
108  */
109 /*
110  * Definitions for initial stack pointer and data area (in DPRAM)
111  */
112 #define CONFIG_SYS_INIT_RAM_ADDR	0x80000000
113 #define CONFIG_SYS_INIT_RAM_SIZE		0x20000	/* Size of used area in internal SRAM */
114 #define CONFIG_SYS_INIT_RAM_CTRL	0x221
115 #define CONFIG_SYS_GBL_DATA_OFFSET	((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 0x10)
116 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
117 
118 /*
119  * Start addresses for the final memory configuration
120  * (Set up by the startup code)
121  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
122  */
123 #define CONFIG_SYS_SDRAM_BASE		0x40000000
124 #define CONFIG_SYS_SDRAM_SIZE		64	/* SDRAM size in MB */
125 #define CONFIG_SYS_SDRAM_CFG1		0x43711630
126 #define CONFIG_SYS_SDRAM_CFG2		0x56670000
127 #define CONFIG_SYS_SDRAM_CTRL		0xE1092000
128 #define CONFIG_SYS_SDRAM_EMOD		0x80010000
129 #define CONFIG_SYS_SDRAM_MODE		0x00CD0000
130 
131 #define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE + 0x400
132 #define CONFIG_SYS_MEMTEST_END		((CONFIG_SYS_SDRAM_SIZE - 3) << 20)
133 
134 #define CONFIG_SYS_MONITOR_BASE		(CONFIG_SYS_FLASH_BASE + 0x400)
135 #define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
136 
137 #define CONFIG_SYS_BOOTPARAMS_LEN	64*1024
138 #define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc() */
139 
140 /*
141  * For booting Linux, the board info and command line data
142  * have to be in the first 8 MB of memory, since this is
143  * the maximum mapped by the Linux kernel during initialization ??
144  */
145 #define CONFIG_SYS_BOOTMAPSZ		(CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
146 #define CONFIG_SYS_BOOTM_LEN		(CONFIG_SYS_SDRAM_SIZE << 20)
147 
148 /*-----------------------------------------------------------------------
149  * FLASH organization
150  */
151 #define CONFIG_SYS_FLASH_CFI
152 #ifdef CONFIG_SYS_FLASH_CFI
153 #	define CONFIG_FLASH_CFI_DRIVER		1
154 #	define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
155 #	define CONFIG_FLASH_SPANSION_S29WS_N	1
156 #	define CONFIG_SYS_FLASH_SIZE		0x1000000	/* Max size that the board might have */
157 #	define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
158 #	define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
159 #	define CONFIG_SYS_MAX_FLASH_SECT	137	/* max number of sectors on one chip */
160 #	define CONFIG_SYS_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
161 #endif
162 
163 #define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_CS0_BASE
164 
165 /* Configuration for environment
166  * Environment is embedded in u-boot in the second sector of the flash
167  */
168 #define CONFIG_ENV_OFFSET		(CONFIG_SYS_FLASH_BASE + 0x40000)
169 #define CONFIG_ENV_SIZE			0x1000
170 #define CONFIG_ENV_SECT_SIZE		0x8000
171 
172 #define LDS_BOARD_TEXT \
173 	. = DEFINED(env_offset) ? env_offset : .; \
174 	env/embedded.o(.text*)
175 
176 /*-----------------------------------------------------------------------
177  * Cache Configuration
178  */
179 #define CONFIG_SYS_CACHELINE_SIZE	16
180 
181 #define ICACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
182 					 CONFIG_SYS_INIT_RAM_SIZE - 8)
183 #define DCACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
184 					 CONFIG_SYS_INIT_RAM_SIZE - 4)
185 #define CONFIG_SYS_ICACHE_INV		(CF_CACR_CINVA)
186 #define CONFIG_SYS_CACHE_ACR0		(CONFIG_SYS_SDRAM_BASE | \
187 					 CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
188 					 CF_ACR_EN | CF_ACR_SM_ALL)
189 #define CONFIG_SYS_CACHE_ICACR		(CF_CACR_EC | CF_CACR_CINVA | \
190 					 CF_CACR_DCM_P)
191 
192 /*-----------------------------------------------------------------------
193  * Chipselect bank definitions
194  */
195 /*
196  * CS0 - NOR Flash
197  * CS1 - Ext SRAM
198  * CS2 - Available
199  * CS3 - Available
200  * CS4 - Available
201  * CS5 - Available
202  */
203 #define CONFIG_SYS_CS0_BASE		0
204 #define CONFIG_SYS_CS0_MASK		0x00FF0001
205 #define CONFIG_SYS_CS0_CTRL		0x00001FA0
206 
207 #define CONFIG_SYS_CS1_BASE		0xC0000000
208 #define CONFIG_SYS_CS1_MASK		0x00070001
209 #define CONFIG_SYS_CS1_CTRL		0x00001FA0
210 
211 #endif				/* _M53017EVB_H */
212