1 /* 2 * Configuation settings for the Motorola MC5282EVB board. 3 * 4 * (C) Copyright 2003 Josef Baumgartner <josef.baumgartner@telex.de> 5 * 6 * See file CREDITS for list of people who contributed to this 7 * project. 8 * 9 * This program is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License as 11 * published by the Free Software Foundation; either version 2 of 12 * the License, or (at your option) any later version. 13 * 14 * This program is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * You should have received a copy of the GNU General Public License 20 * along with this program; if not, write to the Free Software 21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 22 * MA 02111-1307 USA 23 */ 24 25 /* 26 * board/config.h - configuration options, board specific 27 */ 28 29 #ifndef _CONFIG_M5282EVB_H 30 #define _CONFIG_M5282EVB_H 31 32 /* 33 * High Level Configuration Options 34 * (easy to change) 35 */ 36 #define CONFIG_MCF52x2 /* define processor family */ 37 #define CONFIG_M5282 /* define processor type */ 38 39 #define CONFIG_MCFTMR 40 41 #define CONFIG_MCFUART 42 #define CFG_UART_PORT (0) 43 #define CONFIG_BAUDRATE 19200 44 #define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } 45 46 #undef CONFIG_MONITOR_IS_IN_RAM /* define if monitor is started from a pre-loader */ 47 48 /* Configuration for environment 49 * Environment is embedded in u-boot in the second sector of the flash 50 */ 51 #define CFG_ENV_ADDR 0xffe04000 52 #define CFG_ENV_SIZE 0x2000 53 #define CFG_ENV_IS_IN_FLASH 1 54 55 /* 56 * BOOTP options 57 */ 58 #define CONFIG_BOOTP_BOOTFILESIZE 59 #define CONFIG_BOOTP_BOOTPATH 60 #define CONFIG_BOOTP_GATEWAY 61 #define CONFIG_BOOTP_HOSTNAME 62 63 /* 64 * Command line configuration. 65 */ 66 #include <config_cmd_default.h> 67 #define CONFIG_CMD_NET 68 #define CONFIG_CMD_PING 69 #define CONFIG_CMD_MII 70 71 #undef CONFIG_CMD_LOADS 72 #undef CONFIG_CMD_LOADB 73 74 #define CONFIG_MCFFEC 75 #ifdef CONFIG_MCFFEC 76 # define CONFIG_NET_MULTI 1 77 # define CONFIG_MII 1 78 # define CONFIG_MII_INIT 1 79 # define CFG_DISCOVER_PHY 80 # define CFG_RX_ETH_BUFFER 8 81 # define CFG_FAULT_ECHO_LINK_DOWN 82 83 # define CFG_FEC0_PINMUX 0 84 # define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE 85 # define MCFFEC_TOUT_LOOP 50000 86 /* If CFG_DISCOVER_PHY is not defined - hardcoded */ 87 # ifndef CFG_DISCOVER_PHY 88 # define FECDUPLEX FULL 89 # define FECSPEED _100BASET 90 # else 91 # ifndef CFG_FAULT_ECHO_LINK_DOWN 92 # define CFG_FAULT_ECHO_LINK_DOWN 93 # endif 94 # endif /* CFG_DISCOVER_PHY */ 95 #endif 96 97 #define CONFIG_BOOTDELAY 5 98 #ifdef CONFIG_MCFFEC 99 # define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 100 # define CONFIG_IPADDR 192.162.1.2 101 # define CONFIG_NETMASK 255.255.255.0 102 # define CONFIG_SERVERIP 192.162.1.1 103 # define CONFIG_GATEWAYIP 192.162.1.1 104 # define CONFIG_OVERWRITE_ETHADDR_ONCE 105 #endif /* CONFIG_MCFFEC */ 106 107 #define CONFIG_HOSTNAME M5272C3 108 #define CONFIG_EXTRA_ENV_SETTINGS \ 109 "netdev=eth0\0" \ 110 "loadaddr=10000\0" \ 111 "u-boot=u-boot.bin\0" \ 112 "load=tftp ${loadaddr) ${u-boot}\0" \ 113 "upd=run load; run prog\0" \ 114 "prog=prot off ffe00000 ffe3ffff;" \ 115 "era ffe00000 ffe3ffff;" \ 116 "cp.b ${loadaddr} ffe00000 ${filesize};"\ 117 "save\0" \ 118 "" 119 120 #define CFG_PROMPT "-> " 121 #define CFG_LONGHELP /* undef to save memory */ 122 123 #if defined(CONFIG_CMD_KGDB) 124 #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ 125 #else 126 #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ 127 #endif 128 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ 129 #define CFG_MAXARGS 16 /* max number of command args */ 130 #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ 131 132 #define CFG_LOAD_ADDR 0x20000 133 134 #define CFG_MEMTEST_START 0x400 135 #define CFG_MEMTEST_END 0x380000 136 137 #define CFG_HZ 1000000 138 #define CFG_CLK 64000000 139 140 /* PLL Configuration: Ext Clock * 6 (see table 9-4 of MCF user manual) */ 141 142 #define CFG_MFD 0x02 /* PLL Multiplication Factor Devider */ 143 #define CFG_RFD 0x00 /* PLL Reduce Frecuency Devider */ 144 145 /* 146 * Low Level Configuration Settings 147 * (address mappings, register initial values, etc.) 148 * You should know what you are doing if you make changes here. 149 */ 150 #define CFG_MBAR 0x40000000 151 152 /*----------------------------------------------------------------------- 153 * Definitions for initial stack pointer and data area (in DPRAM) 154 */ 155 #define CFG_INIT_RAM_ADDR 0x20000000 156 #define CFG_INIT_RAM_END 0x10000 /* End of used area in internal SRAM */ 157 #define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ 158 #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) 159 #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET 160 161 /*----------------------------------------------------------------------- 162 * Start addresses for the final memory configuration 163 * (Set up by the startup code) 164 * Please note that CFG_SDRAM_BASE _must_ start at 0 165 */ 166 #define CFG_SDRAM_BASE 0x00000000 167 #define CFG_SDRAM_SIZE 16 /* SDRAM size in MB */ 168 #define CFG_FLASH_BASE 0xffe00000 169 #define CFG_INT_FLASH_BASE 0xf0000000 170 #define CFG_INT_FLASH_ENABLE 0x21 171 172 /* If M5282 port is fully implemented the monitor base will be behind 173 * the vector table. */ 174 #if (TEXT_BASE != CFG_INT_FLASH_BASE) 175 #define CFG_MONITOR_BASE (CFG_FLASH_BASE + 0x400) 176 #else 177 #define CFG_MONITOR_BASE (TEXT_BASE + 0x418) /* 24 Byte for CFM-Config */ 178 #endif 179 180 #define CFG_MONITOR_LEN 0x20000 181 #define CFG_MALLOC_LEN (256 << 10) 182 #define CFG_BOOTPARAMS_LEN 64*1024 183 184 /* 185 * For booting Linux, the board info and command line data 186 * have to be in the first 8 MB of memory, since this is 187 * the maximum mapped by the Linux kernel during initialization ?? 188 */ 189 #define CFG_BOOTMAPSZ (CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20)) 190 191 /*----------------------------------------------------------------------- 192 * FLASH organization 193 */ 194 #define CFG_FLASH_CFI 195 #ifdef CFG_FLASH_CFI 196 197 # define CFG_FLASH_CFI_DRIVER 1 198 # define CFG_FLASH_SIZE 0x1000000 /* Max size that the board might have */ 199 # define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT 200 # define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ 201 # define CFG_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ 202 # define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ 203 # define CFG_FLASH_CHECKSUM 204 # define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } 205 #endif 206 207 /*----------------------------------------------------------------------- 208 * Cache Configuration 209 */ 210 #define CFG_CACHELINE_SIZE 16 211 212 /*----------------------------------------------------------------------- 213 * Memory bank definitions 214 */ 215 #define CFG_CS0_BASE CFG_FLASH_BASE 216 #define CFG_CS0_SIZE 2*1024*1024 217 #define CFG_CS0_WIDTH 16 218 #define CFG_CS0_RO 0 219 #define CFG_CS0_WS 6 220 /* 221 #define CFG_CS3_BASE 0xE0000000 222 #define CFG_CS3_SIZE 1*1024*1024 223 #define CFG_CS3_WIDTH 16 224 #define CFG_CS3_RO 0 225 #define CFG_CS3_WS 6 226 */ 227 /*----------------------------------------------------------------------- 228 * Port configuration 229 */ 230 #define CFG_PACNT 0x0000000 /* Port A D[31:24] */ 231 #define CFG_PADDR 0x0000000 232 #define CFG_PADAT 0x0000000 233 234 #define CFG_PBCNT 0x0000000 /* Port B D[23:16] */ 235 #define CFG_PBDDR 0x0000000 236 #define CFG_PBDAT 0x0000000 237 238 #define CFG_PCCNT 0x0000000 /* Port C D[15:08] */ 239 #define CFG_PCDDR 0x0000000 240 #define CFG_PCDAT 0x0000000 241 242 #define CFG_PDCNT 0x0000000 /* Port D D[07:00] */ 243 #define CFG_PCDDR 0x0000000 244 #define CFG_PCDAT 0x0000000 245 246 #define CFG_PEHLPAR 0xC0 247 #define CFG_PUAPAR 0x0F /* UA0..UA3 = Uart 0 +1 */ 248 #define CFG_DDRUA 0x05 249 #define CFG_PJPAR 0xFF; 250 251 #endif /* _CONFIG_M5282EVB_H */ 252