1 /* 2 * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. 3 * Hayden Fraser (Hayden.Fraser@freescale.com) 4 * 5 * See file CREDITS for list of people who contributed to this 6 * project. 7 * 8 * This program is free software; you can redistribute it and/or 9 * modify it under the terms of the GNU General Public License as 10 * published by the Free Software Foundation; either version 2 of 11 * the License, or (at your option) any later version. 12 * 13 * This program is distributed in the hope that it will be useful, 14 * but WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 * GNU General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software 20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 21 * MA 02111-1307 USA 22 */ 23 24 #ifndef _M5253DEMO_H 25 #define _M5253DEMO_H 26 27 #define CONFIG_MCF52x2 /* define processor family */ 28 #define CONFIG_M5253 /* define processor type */ 29 #define CONFIG_M5253DEMO /* define board type */ 30 31 #define CONFIG_MCFTMR 32 33 #define CONFIG_MCFUART 34 #define CONFIG_SYS_UART_PORT (0) 35 #define CONFIG_BAUDRATE 115200 36 #define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } 37 38 #undef CONFIG_WATCHDOG /* disable watchdog */ 39 40 #define CONFIG_BOOTDELAY 5 41 42 /* Configuration for environment 43 * Environment is embedded in u-boot in the second sector of the flash 44 */ 45 #ifdef CONFIG_MONITOR_IS_IN_RAM 46 # define CONFIG_ENV_OFFSET 0x4000 47 # define CONFIG_ENV_SECT_SIZE 0x1000 48 # define CONFIG_ENV_IS_IN_FLASH 1 49 #else 50 # define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x4000) 51 # define CONFIG_ENV_SECT_SIZE 0x1000 52 # define CONFIG_ENV_IS_IN_FLASH 1 53 #endif 54 55 /* 56 * Command line configuration. 57 */ 58 #include <config_cmd_default.h> 59 60 #define CONFIG_CMD_LOADB 61 #define CONFIG_CMD_LOADS 62 #define CONFIG_CMD_EXT2 63 #define CONFIG_CMD_FAT 64 #define CONFIG_CMD_IDE 65 #define CONFIG_CMD_MEMORY 66 #define CONFIG_CMD_MISC 67 #define CONFIG_CMD_PING 68 69 #ifdef CONFIG_CMD_IDE 70 /* ATA */ 71 # define CONFIG_DOS_PARTITION 72 # define CONFIG_MAC_PARTITION 73 # define CONFIG_IDE_RESET 1 74 # define CONFIG_IDE_PREINIT 1 75 # define CONFIG_ATAPI 76 # undef CONFIG_LBA48 77 78 # define CONFIG_SYS_IDE_MAXBUS 1 79 # define CONFIG_SYS_IDE_MAXDEVICE 2 80 81 # define CONFIG_SYS_ATA_BASE_ADDR (CONFIG_SYS_MBAR2 + 0x800) 82 # define CONFIG_SYS_ATA_IDE0_OFFSET 0 83 84 # define CONFIG_SYS_ATA_DATA_OFFSET 0xA0 /* Offset for data I/O */ 85 # define CONFIG_SYS_ATA_REG_OFFSET 0xA0 /* Offset for normal register accesses */ 86 # define CONFIG_SYS_ATA_ALT_OFFSET 0xC0 /* Offset for alternate registers */ 87 # define CONFIG_SYS_ATA_STRIDE 4 /* Interval between registers */ 88 # define _IO_BASE 0 89 #endif 90 91 #define CONFIG_DRIVER_DM9000 92 #ifdef CONFIG_DRIVER_DM9000 93 # define CONFIG_DM9000_BASE (CONFIG_SYS_CS1_BASE | 0x300) 94 # define DM9000_IO CONFIG_DM9000_BASE 95 # define DM9000_DATA (CONFIG_DM9000_BASE + 4) 96 # undef CONFIG_DM9000_DEBUG 97 98 # define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 99 # define CONFIG_IPADDR 10.82.121.249 100 # define CONFIG_NETMASK 255.255.252.0 101 # define CONFIG_SERVERIP 10.82.120.80 102 # define CONFIG_GATEWAYIP 10.82.123.254 103 # define CONFIG_OVERWRITE_ETHADDR_ONCE 104 105 # define CONFIG_EXTRA_ENV_SETTINGS \ 106 "netdev=eth0\0" \ 107 "inpclk=" MK_STR(CONFIG_SYS_INPUT_CLKSRC) "\0" \ 108 "loadaddr=10000\0" \ 109 "u-boot=u-boot.bin\0" \ 110 "load=tftp ${loadaddr) ${u-boot}\0" \ 111 "upd=run load; run prog\0" \ 112 "prog=prot off 0 2ffff;" \ 113 "era 0 2ffff;" \ 114 "cp.b ${loadaddr} 0 ${filesize};" \ 115 "save\0" \ 116 "" 117 #endif 118 119 #define CONFIG_HOSTNAME M5253DEMO 120 121 /* I2C */ 122 #define CONFIG_FSL_I2C 123 #define CONFIG_HARD_I2C /* I2C with hw support */ 124 #define CONFIG_SYS_I2C_SPEED 80000 125 #define CONFIG_SYS_I2C_SLAVE 0x7F 126 #define CONFIG_SYS_I2C_OFFSET 0x00000280 127 #define CONFIG_SYS_IMMR CONFIG_SYS_MBAR 128 #define CONFIG_SYS_I2C_PINMUX_REG (*(u32 *) (CONFIG_SYS_MBAR+0x19C)) 129 #define CONFIG_SYS_I2C_PINMUX_CLR (0xFFFFE7FF) 130 #define CONFIG_SYS_I2C_PINMUX_SET (0) 131 132 #define CONFIG_SYS_PROMPT "=> " 133 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 134 135 #if defined(CONFIG_CMD_KGDB) 136 # define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 137 #else 138 # define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 139 #endif 140 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ 141 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 142 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 143 144 #define CONFIG_SYS_LOAD_ADDR 0x00100000 145 146 #define CONFIG_SYS_MEMTEST_START 0x400 147 #define CONFIG_SYS_MEMTEST_END 0x380000 148 149 #define CONFIG_SYS_HZ 1000 150 151 #undef CONFIG_SYS_PLL_BYPASS /* bypass PLL for test purpose */ 152 #define CONFIG_SYS_FAST_CLK 153 #ifdef CONFIG_SYS_FAST_CLK 154 # define CONFIG_SYS_PLLCR 0x1243E054 155 # define CONFIG_SYS_CLK 140000000 156 #else 157 # define CONFIG_SYS_PLLCR 0x135a4140 158 # define CONFIG_SYS_CLK 70000000 159 #endif 160 161 /* 162 * Low Level Configuration Settings 163 * (address mappings, register initial values, etc.) 164 * You should know what you are doing if you make changes here. 165 */ 166 167 #define CONFIG_SYS_MBAR 0x10000000 /* Register Base Addrs */ 168 #define CONFIG_SYS_MBAR2 0x80000000 /* Module Base Addrs 2 */ 169 170 /* 171 * Definitions for initial stack pointer and data area (in DPRAM) 172 */ 173 #define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 174 #define CONFIG_SYS_INIT_RAM_END 0x10000 /* End of used area in internal SRAM */ 175 #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ 176 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) 177 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 178 179 /* 180 * Start addresses for the final memory configuration 181 * (Set up by the startup code) 182 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 183 */ 184 #define CONFIG_SYS_SDRAM_BASE 0x00000000 185 #define CONFIG_SYS_SDRAM_SIZE 16 /* SDRAM size in MB */ 186 187 #ifdef CONFIG_MONITOR_IS_IN_RAM 188 # define CONFIG_SYS_MONITOR_BASE 0x20000 189 #else 190 # define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400) 191 #endif 192 193 #define CONFIG_SYS_MONITOR_LEN 0x40000 194 #define CONFIG_SYS_MALLOC_LEN (256 << 10) 195 #define CONFIG_SYS_BOOTPARAMS_LEN (64*1024) 196 197 /* 198 * For booting Linux, the board info and command line data 199 * have to be in the first 8 MB of memory, since this is 200 * the maximum mapped by the Linux kernel during initialization ?? 201 */ 202 #define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20)) 203 204 /* FLASH organization */ 205 #define CONFIG_SYS_FLASH_BASE (CONFIG_SYS_CS0_BASE) 206 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ 207 #define CONFIG_SYS_MAX_FLASH_SECT 2048 /* max number of sectors on one chip */ 208 #define CONFIG_SYS_FLASH_ERASE_TOUT 1000 209 210 #define FLASH_SST6401B 0x200 211 #define SST_ID_xF6401B 0x236D236D 212 213 #undef CONFIG_SYS_FLASH_CFI 214 #ifdef CONFIG_SYS_FLASH_CFI 215 /* 216 * Unable to use CFI driver, due to incompatible sector erase command by SST. 217 * Amd/Atmel use 0x30 for sector erase, SST use 0x50. 218 * 0x30 is block erase in SST 219 */ 220 # define CONFIG_FLASH_CFI_DRIVER 1 221 # define CONFIG_SYS_FLASH_SIZE 0x800000 222 # define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT 223 # define CONFIG_FLASH_CFI_LEGACY 224 #else 225 # define CONFIG_SYS_SST_SECT 2048 226 # define CONFIG_SYS_SST_SECTSZ 0x1000 227 # define CONFIG_SYS_FLASH_WRITE_TOUT 500 228 #endif 229 230 /* Cache Configuration */ 231 #define CONFIG_SYS_CACHELINE_SIZE 16 232 233 /* Port configuration */ 234 #define CONFIG_SYS_FECI2C 0xF0 235 236 #define CONFIG_SYS_CS0_BASE 0xFF800000 237 #define CONFIG_SYS_CS0_MASK 0x007F0021 238 #define CONFIG_SYS_CS0_CTRL 0x00001D80 239 240 #define CONFIG_SYS_CS1_BASE 0xE0000000 241 #define CONFIG_SYS_CS1_MASK 0x00000001 242 #define CONFIG_SYS_CS1_CTRL 0x00003DD8 243 244 /*----------------------------------------------------------------------- 245 * Port configuration 246 */ 247 #define CONFIG_SYS_GPIO_FUNC 0x00000008 /* Set gpio pins: none */ 248 #define CONFIG_SYS_GPIO1_FUNC 0x00df00f0 /* 36-39(SWITCH),48-52(FPGAs),54 */ 249 #define CONFIG_SYS_GPIO_EN 0x00000008 /* Set gpio output enable */ 250 #define CONFIG_SYS_GPIO1_EN 0x00c70000 /* Set gpio output enable */ 251 #define CONFIG_SYS_GPIO_OUT 0x00000008 /* Set outputs to default state */ 252 #define CONFIG_SYS_GPIO1_OUT 0x00c70000 /* Set outputs to default state */ 253 #define CONFIG_SYS_GPIO1_LED 0x00400000 /* user led */ 254 255 #endif /* _M5253DEMO_H */ 256