xref: /openbmc/u-boot/include/configs/M5235EVB.h (revision ab0df36f)
1 /*
2  * Configuation settings for the Freescale MCF5329 FireEngine board.
3  *
4  * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
5  * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
6  *
7  * See file CREDITS for list of people who contributed to this
8  * project.
9  *
10  * This program is free software; you can redistribute it and/or
11  * modify it under the terms of the GNU General Public License as
12  * published by the Free Software Foundation; either version 2 of
13  * the License, or (at your option) any later version.
14  *
15  * This program is distributed in the hope that it will be useful,
16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
18  * GNU General Public License for more details.
19  *
20  * You should have received a copy of the GNU General Public License
21  * along with this program; if not, write to the Free Software
22  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
23  * MA 02111-1307 USA
24  */
25 
26 /*
27  * board/config.h - configuration options, board specific
28  */
29 
30 #ifndef _M5235EVB_H
31 #define _M5235EVB_H
32 
33 /*
34  * High Level Configuration Options
35  * (easy to change)
36  */
37 #define CONFIG_MCF523x		/* define processor family */
38 #define CONFIG_M5235		/* define processor type */
39 
40 #define CONFIG_MCFUART
41 #define CFG_UART_PORT		(0)
42 #define CONFIG_BAUDRATE		115200
43 #define CFG_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }
44 
45 #undef CONFIG_WATCHDOG
46 #define CONFIG_WATCHDOG_TIMEOUT	5000	/* timeout in milliseconds, max timeout is 6.71sec */
47 
48 /*
49  * BOOTP options
50  */
51 #define CONFIG_BOOTP_BOOTFILESIZE
52 #define CONFIG_BOOTP_BOOTPATH
53 #define CONFIG_BOOTP_GATEWAY
54 #define CONFIG_BOOTP_HOSTNAME
55 
56 /* Command line configuration */
57 #include <config_cmd_default.h>
58 
59 #define CONFIG_CMD_BOOTD
60 #define CONFIG_CMD_CACHE
61 #define CONFIG_CMD_DHCP
62 #define CONFIG_CMD_ELF
63 #define CONFIG_CMD_FLASH
64 #define CONFIG_CMD_I2C
65 #define CONFIG_CMD_MEMORY
66 #define CONFIG_CMD_MISC
67 #define CONFIG_CMD_MII
68 #define CONFIG_CMD_NET
69 #define CONFIG_CMD_PCI
70 #define CONFIG_CMD_PING
71 #define CONFIG_CMD_REGINFO
72 
73 #undef CONFIG_CMD_LOADB
74 #undef CONFIG_CMD_LOADS
75 
76 #define CONFIG_MCFFEC
77 #ifdef CONFIG_MCFFEC
78 #	define CONFIG_NET_MULTI		1
79 #	define CONFIG_MII		1
80 #	define CONFIG_MII_INIT		1
81 #	define CFG_DISCOVER_PHY
82 #	define CFG_RX_ETH_BUFFER	8
83 #	define CFG_FAULT_ECHO_LINK_DOWN
84 
85 #	define CFG_FEC0_PINMUX		0
86 #	define CFG_FEC0_MIIBASE		CFG_FEC0_IOBASE
87 #	define MCFFEC_TOUT_LOOP		50000
88 /* If CFG_DISCOVER_PHY is not defined - hardcoded */
89 #	ifndef CFG_DISCOVER_PHY
90 #		define FECDUPLEX	FULL
91 #		define FECSPEED		_100BASET
92 #	else
93 #		ifndef CFG_FAULT_ECHO_LINK_DOWN
94 #			define CFG_FAULT_ECHO_LINK_DOWN
95 #		endif
96 #	endif			/* CFG_DISCOVER_PHY */
97 #endif
98 
99 /* Timer */
100 #define CONFIG_MCFTMR
101 #undef CONFIG_MCFPIT
102 
103 /* I2C */
104 #define CONFIG_FSL_I2C
105 #define CONFIG_HARD_I2C		/* I2C with hw support */
106 #undef CONFIG_SOFT_I2C		/* I2C bit-banged */
107 #define CFG_I2C_SPEED		80000
108 #define CFG_I2C_SLAVE		0x7F
109 #define CFG_I2C_OFFSET		0x00000300
110 #define CFG_IMMR		CFG_MBAR
111 #define CFG_I2C_PINMUX_REG	(gpio->par_qspi)
112 #define CFG_I2C_PINMUX_CLR	~(GPIO_PAR_FECI2C_SCL_MASK | GPIO_PAR_FECI2C_SDA_MASK)
113 #define CFG_I2C_PINMUX_SET	(GPIO_PAR_FECI2C_SCL_I2CSCL | GPIO_PAR_FECI2C_SDA_I2CSDA)
114 
115 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
116 #define CONFIG_BOOTDELAY	1	/* autoboot after 5 seconds */
117 #define CONFIG_BOOTFILE		"u-boot.bin"
118 #ifdef CONFIG_MCFFEC
119 #	define CONFIG_ETHADDR	00:e0:0c:bc:e5:60
120 #	define CONFIG_IPADDR	192.162.1.2
121 #	define CONFIG_NETMASK	255.255.255.0
122 #	define CONFIG_SERVERIP	192.162.1.1
123 #	define CONFIG_GATEWAYIP	192.162.1.1
124 #	define CONFIG_OVERWRITE_ETHADDR_ONCE
125 #endif				/* FEC_ENET */
126 
127 #define CONFIG_HOSTNAME		M5235EVB
128 #define CONFIG_EXTRA_ENV_SETTINGS		\
129 	"netdev=eth0\0"				\
130 	"loadaddr=10000\0"			\
131 	"u-boot=u-boot.bin\0"			\
132 	"load=tftp ${loadaddr) ${u-boot}\0"	\
133 	"upd=run load; run prog\0"		\
134 	"prog=prot off ffe00000 ffe3ffff;"	\
135 	"era ffe00000 ffe3ffff;"		\
136 	"cp.b ${loadaddr} ffe00000 ${filesize};"\
137 	"save\0"				\
138 	""
139 
140 #define CONFIG_PRAM		512	/* 512 KB */
141 #define CFG_PROMPT		"-> "
142 #define CFG_LONGHELP		/* undef to save memory */
143 
144 #if defined(CONFIG_KGDB)
145 #	define CFG_CBSIZE		1024	/* Console I/O Buffer Size */
146 #else
147 #	define CFG_CBSIZE		256	/* Console I/O Buffer Size */
148 #endif
149 
150 #define CFG_PBSIZE		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
151 #define CFG_MAXARGS		16	/* max number of command args */
152 #define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size    */
153 #define CFG_LOAD_ADDR		(CFG_SDRAM_BASE+0x20000)
154 
155 #define CFG_HZ			1000
156 #define CFG_CLK			75000000
157 #define CFG_CPU_CLK		CFG_CLK * 2
158 
159 #define CFG_MBAR		0x40000000
160 
161 /*
162  * Low Level Configuration Settings
163  * (address mappings, register initial values, etc.)
164  * You should know what you are doing if you make changes here.
165  */
166 /*-----------------------------------------------------------------------
167  * Definitions for initial stack pointer and data area (in DPRAM)
168  */
169 #define CFG_INIT_RAM_ADDR	0x20000000
170 #define CFG_INIT_RAM_END	0x10000	/* End of used area in internal SRAM */
171 #define CFG_INIT_RAM_CTRL	0x21
172 #define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
173 #define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE - 0x10)
174 #define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
175 
176 /*-----------------------------------------------------------------------
177  * Start addresses for the final memory configuration
178  * (Set up by the startup code)
179  * Please note that CFG_SDRAM_BASE _must_ start at 0
180  */
181 #define CFG_SDRAM_BASE		0x00000000
182 #define CFG_SDRAM_SIZE		16	/* SDRAM size in MB */
183 
184 #define CFG_MEMTEST_START	CFG_SDRAM_BASE + 0x400
185 #define CFG_MEMTEST_END		((CFG_SDRAM_SIZE - 3) << 20)
186 
187 #define CFG_MONITOR_BASE	(CFG_FLASH_BASE + 0x400)
188 #define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
189 
190 #define CFG_BOOTPARAMS_LEN	64*1024
191 #define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc() */
192 
193 /*
194  * For booting Linux, the board info and command line data
195  * have to be in the first 8 MB of memory, since this is
196  * the maximum mapped by the Linux kernel during initialization ??
197  */
198 /* Initial Memory map for Linux */
199 #define CFG_BOOTMAPSZ		(CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20))
200 
201 /*-----------------------------------------------------------------------
202  * FLASH organization
203  */
204 #define CFG_FLASH_CFI
205 #ifdef CFG_FLASH_CFI
206 #	define CONFIG_FLASH_CFI_DRIVER	1
207 #	define CFG_FLASH_SIZE		0x800000	/* Max size that the board might have */
208 #ifdef NORFLASH_PS32BIT
209 #	define CFG_FLASH_CFI_WIDTH	FLASH_CFI_32BIT
210 #else
211 #	define CFG_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
212 #endif
213 #	define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
214 #	define CFG_MAX_FLASH_SECT	137	/* max number of sectors on one chip */
215 #	define CFG_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
216 #endif
217 
218 #define CFG_FLASH_BASE		(CFG_CS0_BASE << 16)
219 
220 /* Configuration for environment
221  * Environment is embedded in u-boot in the second sector of the flash
222  */
223 #define CFG_ENV_IS_IN_FLASH	1
224 #define CFG_ENV_IS_EMBEDDED	1
225 #ifdef NORFLASH_PS32BIT
226 #	define CFG_ENV_OFFSET		(0x8000)
227 #	define CFG_ENV_SIZE		0x4000
228 #	define CFG_ENV_SECT_SIZE	0x4000
229 #else
230 #	define CFG_ENV_OFFSET		(0x4000)
231 #	define CFG_ENV_SIZE		0x2000
232 #	define CFG_ENV_SECT_SIZE	0x2000
233 #endif
234 
235 /*-----------------------------------------------------------------------
236  * Cache Configuration
237  */
238 #define CFG_CACHELINE_SIZE	16
239 
240 /*-----------------------------------------------------------------------
241  * Chipselect bank definitions
242  */
243 /*
244  * CS0 - NOR Flash 1, 2, 4, or 8MB
245  * CS1 - Available
246  * CS2 - Available
247  * CS3 - Available
248  * CS4 - Available
249  * CS5 - Available
250  * CS6 - Available
251  * CS7 - Available
252  */
253 #ifdef NORFLASH_PS32BIT
254 #	define CFG_CS0_BASE	0xFFC0
255 #	define CFG_CS0_MASK	0x003f0001
256 #	define CFG_CS0_CTRL	0x1D00
257 #else
258 #	define CFG_CS0_BASE	0xFFE0
259 #	define CFG_CS0_MASK	0x001f0001
260 #	define CFG_CS0_CTRL	0x1D80
261 #endif
262 
263 #endif				/* _M5329EVB_H */
264