1 /* 2 * Configuation settings for the Freescale MCF5329 FireEngine board. 3 * 4 * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. 5 * TsiChung Liew (Tsi-Chung.Liew@freescale.com) 6 * 7 * See file CREDITS for list of people who contributed to this 8 * project. 9 * 10 * This program is free software; you can redistribute it and/or 11 * modify it under the terms of the GNU General Public License as 12 * published by the Free Software Foundation; either version 2 of 13 * the License, or (at your option) any later version. 14 * 15 * This program is distributed in the hope that it will be useful, 16 * but WITHOUT ANY WARRANTY; without even the implied warranty of 17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 18 * GNU General Public License for more details. 19 * 20 * You should have received a copy of the GNU General Public License 21 * along with this program; if not, write to the Free Software 22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 23 * MA 02111-1307 USA 24 */ 25 26 /* 27 * board/config.h - configuration options, board specific 28 */ 29 30 #ifndef _M5235EVB_H 31 #define _M5235EVB_H 32 33 /* 34 * High Level Configuration Options 35 * (easy to change) 36 */ 37 #define CONFIG_MCF523x /* define processor family */ 38 #define CONFIG_M5235 /* define processor type */ 39 40 #define CONFIG_MCFUART 41 #define CONFIG_SYS_UART_PORT (0) 42 #define CONFIG_BAUDRATE 115200 43 #define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } 44 45 #undef CONFIG_WATCHDOG 46 #define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */ 47 48 /* 49 * BOOTP options 50 */ 51 #define CONFIG_BOOTP_BOOTFILESIZE 52 #define CONFIG_BOOTP_BOOTPATH 53 #define CONFIG_BOOTP_GATEWAY 54 #define CONFIG_BOOTP_HOSTNAME 55 56 /* Command line configuration */ 57 #include <config_cmd_default.h> 58 59 #define CONFIG_CMD_BOOTD 60 #define CONFIG_CMD_CACHE 61 #define CONFIG_CMD_DHCP 62 #define CONFIG_CMD_ELF 63 #define CONFIG_CMD_FLASH 64 #define CONFIG_CMD_I2C 65 #define CONFIG_CMD_MEMORY 66 #define CONFIG_CMD_MISC 67 #define CONFIG_CMD_MII 68 #define CONFIG_CMD_NET 69 #define CONFIG_CMD_PCI 70 #define CONFIG_CMD_PING 71 #define CONFIG_CMD_REGINFO 72 73 #undef CONFIG_CMD_LOADB 74 #undef CONFIG_CMD_LOADS 75 76 #define CONFIG_MCFFEC 77 #ifdef CONFIG_MCFFEC 78 # define CONFIG_NET_MULTI 1 79 # define CONFIG_MII 1 80 # define CONFIG_MII_INIT 1 81 # define CONFIG_SYS_DISCOVER_PHY 82 # define CONFIG_SYS_RX_ETH_BUFFER 8 83 # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 84 85 # define CONFIG_SYS_FEC0_PINMUX 0 86 # define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE 87 # define MCFFEC_TOUT_LOOP 50000 88 /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */ 89 # ifndef CONFIG_SYS_DISCOVER_PHY 90 # define FECDUPLEX FULL 91 # define FECSPEED _100BASET 92 # else 93 # ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN 94 # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 95 # endif 96 # endif /* CONFIG_SYS_DISCOVER_PHY */ 97 #endif 98 99 /* Timer */ 100 #define CONFIG_MCFTMR 101 #undef CONFIG_MCFPIT 102 103 /* I2C */ 104 #define CONFIG_FSL_I2C 105 #define CONFIG_HARD_I2C /* I2C with hw support */ 106 #undef CONFIG_SOFT_I2C /* I2C bit-banged */ 107 #define CONFIG_SYS_I2C_SPEED 80000 108 #define CONFIG_SYS_I2C_SLAVE 0x7F 109 #define CONFIG_SYS_I2C_OFFSET 0x00000300 110 #define CONFIG_SYS_IMMR CONFIG_SYS_MBAR 111 #define CONFIG_SYS_I2C_PINMUX_REG (gpio->par_qspi) 112 #define CONFIG_SYS_I2C_PINMUX_CLR ~(GPIO_PAR_FECI2C_SCL_MASK | GPIO_PAR_FECI2C_SDA_MASK) 113 #define CONFIG_SYS_I2C_PINMUX_SET (GPIO_PAR_FECI2C_SCL_I2CSCL | GPIO_PAR_FECI2C_SDA_I2CSDA) 114 115 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ 116 #define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */ 117 #define CONFIG_BOOTFILE "u-boot.bin" 118 #ifdef CONFIG_MCFFEC 119 # define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 120 # define CONFIG_IPADDR 192.162.1.2 121 # define CONFIG_NETMASK 255.255.255.0 122 # define CONFIG_SERVERIP 192.162.1.1 123 # define CONFIG_GATEWAYIP 192.162.1.1 124 # define CONFIG_OVERWRITE_ETHADDR_ONCE 125 #endif /* FEC_ENET */ 126 127 #define CONFIG_HOSTNAME M5235EVB 128 #define CONFIG_EXTRA_ENV_SETTINGS \ 129 "netdev=eth0\0" \ 130 "loadaddr=10000\0" \ 131 "u-boot=u-boot.bin\0" \ 132 "load=tftp ${loadaddr) ${u-boot}\0" \ 133 "upd=run load; run prog\0" \ 134 "prog=prot off ffe00000 ffe3ffff;" \ 135 "era ffe00000 ffe3ffff;" \ 136 "cp.b ${loadaddr} ffe00000 ${filesize};"\ 137 "save\0" \ 138 "" 139 140 #define CONFIG_PRAM 512 /* 512 KB */ 141 #define CONFIG_SYS_PROMPT "-> " 142 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 143 144 #if defined(CONFIG_KGDB) 145 # define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 146 #else 147 # define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 148 #endif 149 150 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ 151 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 152 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 153 #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE+0x20000) 154 155 #define CONFIG_SYS_HZ 1000 156 #define CONFIG_SYS_CLK 75000000 157 #define CONFIG_SYS_CPU_CLK CONFIG_SYS_CLK * 2 158 159 #define CONFIG_SYS_MBAR 0x40000000 160 161 /* 162 * Low Level Configuration Settings 163 * (address mappings, register initial values, etc.) 164 * You should know what you are doing if you make changes here. 165 */ 166 /*----------------------------------------------------------------------- 167 * Definitions for initial stack pointer and data area (in DPRAM) 168 */ 169 #define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 170 #define CONFIG_SYS_INIT_RAM_END 0x10000 /* End of used area in internal SRAM */ 171 #define CONFIG_SYS_INIT_RAM_CTRL 0x21 172 #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ 173 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE - 0x10) 174 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 175 176 /*----------------------------------------------------------------------- 177 * Start addresses for the final memory configuration 178 * (Set up by the startup code) 179 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 180 */ 181 #define CONFIG_SYS_SDRAM_BASE 0x00000000 182 #define CONFIG_SYS_SDRAM_SIZE 16 /* SDRAM size in MB */ 183 184 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE + 0x400 185 #define CONFIG_SYS_MEMTEST_END ((CONFIG_SYS_SDRAM_SIZE - 3) << 20) 186 187 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400) 188 #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ 189 190 #define CONFIG_SYS_BOOTPARAMS_LEN 64*1024 191 #define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ 192 193 /* 194 * For booting Linux, the board info and command line data 195 * have to be in the first 8 MB of memory, since this is 196 * the maximum mapped by the Linux kernel during initialization ?? 197 */ 198 /* Initial Memory map for Linux */ 199 #define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20)) 200 201 /*----------------------------------------------------------------------- 202 * FLASH organization 203 */ 204 #define CONFIG_SYS_FLASH_CFI 205 #ifdef CONFIG_SYS_FLASH_CFI 206 # define CONFIG_FLASH_CFI_DRIVER 1 207 # define CONFIG_SYS_FLASH_SIZE 0x800000 /* Max size that the board might have */ 208 #ifdef NORFLASH_PS32BIT 209 # define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_32BIT 210 #else 211 # define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT 212 #endif 213 # define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ 214 # define CONFIG_SYS_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ 215 # define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ 216 #endif 217 218 #define CONFIG_SYS_FLASH_BASE (CONFIG_SYS_CS0_BASE) 219 220 /* Configuration for environment 221 * Environment is embedded in u-boot in the second sector of the flash 222 */ 223 #define CONFIG_ENV_IS_IN_FLASH 1 224 #define CONFIG_ENV_IS_EMBEDDED 1 225 #ifdef NORFLASH_PS32BIT 226 # define CONFIG_ENV_OFFSET (0x8000) 227 # define CONFIG_ENV_SIZE 0x4000 228 # define CONFIG_ENV_SECT_SIZE 0x4000 229 #else 230 # define CONFIG_ENV_OFFSET (0x4000) 231 # define CONFIG_ENV_SIZE 0x2000 232 # define CONFIG_ENV_SECT_SIZE 0x2000 233 #endif 234 235 /*----------------------------------------------------------------------- 236 * Cache Configuration 237 */ 238 #define CONFIG_SYS_CACHELINE_SIZE 16 239 240 /*----------------------------------------------------------------------- 241 * Chipselect bank definitions 242 */ 243 /* 244 * CS0 - NOR Flash 1, 2, 4, or 8MB 245 * CS1 - Available 246 * CS2 - Available 247 * CS3 - Available 248 * CS4 - Available 249 * CS5 - Available 250 * CS6 - Available 251 * CS7 - Available 252 */ 253 #ifdef NORFLASH_PS32BIT 254 # define CONFIG_SYS_CS0_BASE 0xFFC00000 255 # define CONFIG_SYS_CS0_MASK 0x003f0001 256 # define CONFIG_SYS_CS0_CTRL 0x00001D00 257 #else 258 # define CONFIG_SYS_CS0_BASE 0xFFE00000 259 # define CONFIG_SYS_CS0_MASK 0x001f0001 260 # define CONFIG_SYS_CS0_CTRL 0x00001D80 261 #endif 262 263 #endif /* _M5329EVB_H */ 264