1 /* 2 * Configuation settings for the Freescale MCF52277 EVB board. 3 * 4 * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. 5 * TsiChung Liew (Tsi-Chung.Liew@freescale.com) 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 /* 11 * board/config.h - configuration options, board specific 12 */ 13 14 #ifndef _M52277EVB_H 15 #define _M52277EVB_H 16 17 /* 18 * High Level Configuration Options 19 * (easy to change) 20 */ 21 #define CONFIG_MCF5227x /* define processor family */ 22 #define CONFIG_M52277 /* define processor type */ 23 #define CONFIG_M52277EVB /* M52277EVB board */ 24 25 #define CONFIG_MCFUART 26 #define CONFIG_SYS_UART_PORT (0) 27 #define CONFIG_BAUDRATE 115200 28 29 #undef CONFIG_WATCHDOG 30 31 #define CONFIG_TIMESTAMP /* Print image info with timestamp */ 32 33 /* 34 * BOOTP options 35 */ 36 #define CONFIG_BOOTP_BOOTFILESIZE 37 #define CONFIG_BOOTP_BOOTPATH 38 #define CONFIG_BOOTP_GATEWAY 39 #define CONFIG_BOOTP_HOSTNAME 40 41 /* Command line configuration */ 42 #include <config_cmd_default.h> 43 44 #define CONFIG_CMD_CACHE 45 #define CONFIG_CMD_DATE 46 #define CONFIG_CMD_ELF 47 #define CONFIG_CMD_FLASH 48 #define CONFIG_CMD_I2C 49 #define CONFIG_CMD_JFFS2 50 #define CONFIG_CMD_LOADB 51 #define CONFIG_CMD_LOADS 52 #define CONFIG_CMD_MEMORY 53 #define CONFIG_CMD_MISC 54 #undef CONFIG_CMD_NET 55 #undef CONFIG_CMD_NFS 56 #define CONFIG_CMD_REGINFO 57 #undef CONFIG_CMD_USB 58 #undef CONFIG_CMD_BMP 59 #define CONFIG_CMD_SPI 60 #define CONFIG_CMD_SF 61 62 #define CONFIG_HOSTNAME M52277EVB 63 #define CONFIG_SYS_UBOOT_END 0x3FFFF 64 #define CONFIG_SYS_LOAD_ADDR2 0x40010007 65 #ifdef CONFIG_SYS_STMICRO_BOOT 66 /* ST Micro serial flash */ 67 #define CONFIG_EXTRA_ENV_SETTINGS \ 68 "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0" \ 69 "loadaddr=0x40010000\0" \ 70 "uboot=u-boot.bin\0" \ 71 "load=loadb ${loadaddr} ${baudrate};" \ 72 "loadb " __stringify(CONFIG_SYS_LOAD_ADDR2) " ${baudrate} \0" \ 73 "upd=run load; run prog\0" \ 74 "prog=sf probe 0:2 10000 1;" \ 75 "sf erase 0 30000;" \ 76 "sf write ${loadaddr} 0 30000;" \ 77 "save\0" \ 78 "" 79 #endif 80 #ifdef CONFIG_SYS_SPANSION_BOOT 81 #define CONFIG_EXTRA_ENV_SETTINGS \ 82 "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0" \ 83 "loadaddr=0x40010000\0" \ 84 "uboot=u-boot.bin\0" \ 85 "load=loadb ${loadaddr} ${baudrate}\0" \ 86 "upd=run load; run prog\0" \ 87 "prog=prot off " __stringify(CONFIG_SYS_FLASH_BASE) \ 88 " " __stringify(CONFIG_SYS_UBOOT_END) ";" \ 89 "era " __stringify(CONFIG_SYS_FLASH_BASE) " " \ 90 __stringify(CONFIG_SYS_UBOOT_END) ";" \ 91 "cp.b ${loadaddr} " __stringify(CONFIG_SYS_FLASH_BASE) \ 92 " ${filesize}; save\0" \ 93 "updsbf=run loadsbf; run progsbf\0" \ 94 "loadsbf=loadb ${loadaddr} ${baudrate};" \ 95 "loadb " __stringify(CONFIG_SYS_LOAD_ADDR2) " ${baudrate} \0" \ 96 "progsbf=sf probe 0:2 10000 1;" \ 97 "sf erase 0 30000;" \ 98 "sf write ${loadaddr} 0 30000;" \ 99 "" 100 #endif 101 102 #define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */ 103 /* LCD */ 104 #ifdef CONFIG_CMD_BMP 105 #define CONFIG_LCD 106 #define CONFIG_SPLASH_SCREEN 107 #define CONFIG_LCD_LOGO 108 #define CONFIG_SHARP_LQ035Q7DH06 109 #endif 110 111 /* USB */ 112 #ifdef CONFIG_CMD_USB 113 #define CONFIG_USB_EHCI 114 #define CONFIG_USB_STORAGE 115 #define CONFIG_DOS_PARTITION 116 #define CONFIG_MAC_PARTITION 117 #define CONFIG_ISO_PARTITION 118 #define CONFIG_SYS_USB_EHCI_REGS_BASE 0xFC0B0000 119 #define CONFIG_SYS_USB_EHCI_CPU_INIT 120 #endif 121 122 /* Realtime clock */ 123 #define CONFIG_MCFRTC 124 #undef RTC_DEBUG 125 #define CONFIG_SYS_RTC_OSCILLATOR (32 * CONFIG_SYS_HZ) 126 127 /* Timer */ 128 #define CONFIG_MCFTMR 129 #undef CONFIG_MCFPIT 130 131 /* I2c */ 132 #define CONFIG_SYS_I2C 133 #define CONFIG_SYS_I2C_FSL 134 #define CONFIG_SYS_FSL_I2C_SPEED 80000 135 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 136 #define CONFIG_SYS_FSL_I2C_OFFSET 0x58000 137 #define CONFIG_SYS_IMMR CONFIG_SYS_MBAR 138 139 /* DSPI and Serial Flash */ 140 #define CONFIG_CF_SPI 141 #define CONFIG_CF_DSPI 142 #define CONFIG_HARD_SPI 143 #define CONFIG_SYS_SBFHDR_SIZE 0x7 144 #ifdef CONFIG_CMD_SPI 145 # define CONFIG_SYS_DSPI_CS2 146 # define CONFIG_SPI_FLASH 147 # define CONFIG_SPI_FLASH_STMICRO 148 149 # define CONFIG_SYS_DSPI_CTAR0 (DSPI_CTAR_TRSZ(7) | \ 150 DSPI_CTAR_PCSSCK_1CLK | \ 151 DSPI_CTAR_PASC(0) | \ 152 DSPI_CTAR_PDT(0) | \ 153 DSPI_CTAR_CSSCK(0) | \ 154 DSPI_CTAR_ASC(0) | \ 155 DSPI_CTAR_DT(1)) 156 #endif 157 158 /* Input, PCI, Flexbus, and VCO */ 159 #define CONFIG_EXTRA_CLOCK 160 161 #define CONFIG_SYS_INPUT_CLKSRC 16000000 162 163 #define CONFIG_PRAM 2048 /* 2048 KB */ 164 165 #define CONFIG_SYS_PROMPT "-> " 166 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 167 168 #if defined(CONFIG_CMD_KGDB) 169 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 170 #else 171 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 172 #endif 173 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ 174 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 175 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 176 177 #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x10000) 178 179 #define CONFIG_SYS_MBAR 0xFC000000 180 181 /* 182 * Low Level Configuration Settings 183 * (address mappings, register initial values, etc.) 184 * You should know what you are doing if you make changes here. 185 */ 186 187 /* 188 * Definitions for initial stack pointer and data area (in DPRAM) 189 */ 190 #define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 191 #define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* Size of used area in internal SRAM */ 192 #define CONFIG_SYS_INIT_RAM_CTRL 0x221 193 #define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 32) 194 #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 32) 195 #define CONFIG_SYS_SBFHDR_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - 32) 196 197 /* 198 * Start addresses for the final memory configuration 199 * (Set up by the startup code) 200 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 201 */ 202 #define CONFIG_SYS_SDRAM_BASE 0x40000000 203 #define CONFIG_SYS_SDRAM_SIZE 64 /* SDRAM size in MB */ 204 #define CONFIG_SYS_SDRAM_CFG1 0x43711630 205 #define CONFIG_SYS_SDRAM_CFG2 0x56670000 206 #define CONFIG_SYS_SDRAM_CTRL 0xE1092000 207 #define CONFIG_SYS_SDRAM_EMOD 0x81810000 208 #define CONFIG_SYS_SDRAM_MODE 0x00CD0000 209 #define CONFIG_SYS_SDRAM_DRV_STRENGTH 0x00 210 211 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE + 0x400 212 #define CONFIG_SYS_MEMTEST_END ((CONFIG_SYS_SDRAM_SIZE - 3) << 20) 213 214 #ifdef CONFIG_CF_SBF 215 # define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_TEXT_BASE + 0x400) 216 #else 217 # define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400) 218 #endif 219 #define CONFIG_SYS_BOOTPARAMS_LEN 64*1024 220 #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ 221 #define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ 222 223 /* Initial Memory map for Linux */ 224 #define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20)) 225 #define CONFIG_SYS_BOOTM_LEN (CONFIG_SYS_SDRAM_SIZE << 20) 226 227 /* 228 * Configuration for environment 229 * Environment is not embedded in u-boot. First time runing may have env 230 * crc error warning if there is no correct environment on the flash. 231 */ 232 #ifdef CONFIG_CF_SBF 233 # define CONFIG_ENV_IS_IN_SPI_FLASH 234 # define CONFIG_ENV_SPI_CS 2 235 #else 236 # define CONFIG_ENV_IS_IN_FLASH 1 237 #endif 238 #define CONFIG_ENV_OVERWRITE 1 239 240 /*----------------------------------------------------------------------- 241 * FLASH organization 242 */ 243 #ifdef CONFIG_SYS_STMICRO_BOOT 244 # define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE 245 # define CONFIG_SYS_FLASH0_BASE CONFIG_SYS_CS0_BASE 246 # define CONFIG_ENV_OFFSET 0x30000 247 # define CONFIG_ENV_SIZE 0x1000 248 # define CONFIG_ENV_SECT_SIZE 0x10000 249 #endif 250 #ifdef CONFIG_SYS_SPANSION_BOOT 251 # define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE 252 # define CONFIG_SYS_FLASH0_BASE CONFIG_SYS_CS0_BASE 253 # define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x40000) 254 # define CONFIG_ENV_SIZE 0x1000 255 # define CONFIG_ENV_SECT_SIZE 0x8000 256 #endif 257 258 #define CONFIG_SYS_FLASH_CFI 259 #ifdef CONFIG_SYS_FLASH_CFI 260 # define CONFIG_FLASH_CFI_DRIVER 1 261 # define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 262 # define CONFIG_FLASH_SPANSION_S29WS_N 1 263 # define CONFIG_SYS_FLASH_SIZE 0x1000000 /* Max size that the board might have */ 264 # define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT 265 # define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ 266 # define CONFIG_SYS_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ 267 # define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ 268 # define CONFIG_SYS_FLASH_CHECKSUM 269 # define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_CS0_BASE } 270 #endif 271 272 /* 273 * This is setting for JFFS2 support in u-boot. 274 * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support. 275 */ 276 #ifdef CONFIG_CMD_JFFS2 277 # define CONFIG_JFFS2_DEV "nor0" 278 # define CONFIG_JFFS2_PART_SIZE (0x01000000 - 0x40000) 279 # define CONFIG_JFFS2_PART_OFFSET (CONFIG_SYS_FLASH0_BASE + 0x40000) 280 #endif 281 282 /*----------------------------------------------------------------------- 283 * Cache Configuration 284 */ 285 #define CONFIG_SYS_CACHELINE_SIZE 16 286 287 #define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ 288 CONFIG_SYS_INIT_RAM_SIZE - 8) 289 #define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ 290 CONFIG_SYS_INIT_RAM_SIZE - 4) 291 #define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV | CF_CACR_INVI) 292 #define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ 293 CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ 294 CF_ACR_EN | CF_ACR_SM_ALL) 295 #define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CINV | \ 296 CF_CACR_DISD | CF_CACR_INVI | \ 297 CF_CACR_CEIB | CF_CACR_DCM | \ 298 CF_CACR_EUSP) 299 300 /*----------------------------------------------------------------------- 301 * Memory bank definitions 302 */ 303 /* 304 * CS0 - NOR Flash 305 * CS1 - Available 306 * CS2 - Available 307 * CS3 - Available 308 * CS4 - Available 309 * CS5 - Available 310 */ 311 312 #ifdef CONFIG_CF_SBF 313 #define CONFIG_SYS_CS0_BASE 0x04000000 314 #define CONFIG_SYS_CS0_MASK 0x00FF0001 315 #define CONFIG_SYS_CS0_CTRL 0x00001FA0 316 #else 317 #define CONFIG_SYS_CS0_BASE 0x00000000 318 #define CONFIG_SYS_CS0_MASK 0x00FF0001 319 #define CONFIG_SYS_CS0_CTRL 0x00001FA0 320 #endif 321 322 #endif /* _M52277EVB_H */ 323