1 /* 2 * Configuation settings for the Freescale MCF5208EVBe. 3 * 4 * Copyright (C) 2004-2008 Freescale Semiconductor, Inc. 5 * TsiChung Liew (Tsi-Chung.Liew@freescale.com) 6 * 7 * See file CREDITS for list of people who contributed to this 8 * project. 9 * 10 * This program is free software; you can redistribute it and/or 11 * modify it under the terms of the GNU General Public License as 12 * published by the Free Software Foundation; either version 2 of 13 * the License, or (at your option) any later version. 14 * 15 * This program is distributed in the hope that it will be useful, 16 * but WITHOUT ANY WARRANTY; without even the implied warranty of 17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 18 * GNU General Public License for more details. 19 * 20 * You should have received a copy of the GNU General Public License 21 * along with this program; if not, write to the Free Software 22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 23 * MA 02111-1307 USA 24 */ 25 26 #ifndef _M5208EVBE_H 27 #define _M5208EVBE_H 28 29 /* 30 * High Level Configuration Options 31 * (easy to change) 32 */ 33 #define CONFIG_MCF520x /* define processor family */ 34 #define CONFIG_M5208 /* define processor type */ 35 36 #define CONFIG_MCFUART 37 #define CONFIG_SYS_UART_PORT (0) 38 #define CONFIG_BAUDRATE 115200 39 #define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } 40 41 #undef CONFIG_WATCHDOG 42 #define CONFIG_WATCHDOG_TIMEOUT 5000 43 44 /* Command line configuration */ 45 #include <config_cmd_default.h> 46 47 #define CONFIG_CMD_CACHE 48 #define CONFIG_CMD_ELF 49 #define CONFIG_CMD_FLASH 50 #undef CONFIG_CMD_I2C 51 #define CONFIG_CMD_MEMORY 52 #define CONFIG_CMD_MISC 53 #define CONFIG_CMD_MII 54 #define CONFIG_CMD_NET 55 #define CONFIG_CMD_PING 56 #define CONFIG_CMD_REGINFO 57 58 #define CONFIG_MCFFEC 59 #ifdef CONFIG_MCFFEC 60 # define CONFIG_NET_MULTI 1 61 # define CONFIG_MII 1 62 # define CONFIG_MII_INIT 1 63 # define CONFIG_SYS_DISCOVER_PHY 64 # define CONFIG_SYS_RX_ETH_BUFFER 8 65 # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 66 # define CONFIG_HAS_ETH1 67 68 # define CONFIG_SYS_FEC0_PINMUX 0 69 # define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE 70 # define MCFFEC_TOUT_LOOP 50000 71 /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */ 72 # ifndef CONFIG_SYS_DISCOVER_PHY 73 # define FECDUPLEX FULL 74 # define FECSPEED _100BASET 75 # else 76 # ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN 77 # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 78 # endif 79 # endif /* CONFIG_SYS_DISCOVER_PHY */ 80 #endif 81 82 /* Timer */ 83 #define CONFIG_MCFTMR 84 #undef CONFIG_MCFPIT 85 86 /* I2C */ 87 #define CONFIG_FSL_I2C 88 #define CONFIG_HARD_I2C /* I2C with hw support */ 89 #undef CONFIG_SOFT_I2C /* I2C bit-banged */ 90 #define CONFIG_SYS_I2C_SPEED 80000 91 #define CONFIG_SYS_I2C_SLAVE 0x7F 92 #define CONFIG_SYS_I2C_OFFSET 0x58000 93 #define CONFIG_SYS_IMMR CONFIG_SYS_MBAR 94 95 #define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */ 96 #define CONFIG_UDP_CHECKSUM 97 98 #ifdef CONFIG_MCFFEC 99 # define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 100 # define CONFIG_IPADDR 192.162.1.2 101 # define CONFIG_NETMASK 255.255.255.0 102 # define CONFIG_SERVERIP 192.162.1.1 103 # define CONFIG_GATEWAYIP 192.162.1.1 104 # define CONFIG_OVERWRITE_ETHADDR_ONCE 105 #endif /* CONFIG_MCFFEC */ 106 107 #define CONFIG_HOSTNAME M5208EVBe 108 #define CONFIG_EXTRA_ENV_SETTINGS \ 109 "netdev=eth0\0" \ 110 "loadaddr=40010000\0" \ 111 "u-boot=u-boot.bin\0" \ 112 "load=tftp ${loadaddr) ${u-boot}\0" \ 113 "upd=run load; run prog\0" \ 114 "prog=prot off 0 3ffff;" \ 115 "era 0 3ffff;" \ 116 "cp.b ${loadaddr} 0 ${filesize};" \ 117 "save\0" \ 118 "" 119 120 #define CONFIG_PRAM 512 /* 512 KB */ 121 #define CONFIG_SYS_PROMPT "-> " 122 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 123 124 #ifdef CONFIG_CMD_KGDB 125 # define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 126 #else 127 # define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 128 #endif 129 130 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ 131 #define CONFIG_SYS_MAXARGS 16 /* max number of cmd args */ 132 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Arg Buf Sz */ 133 #define CONFIG_SYS_LOAD_ADDR 0x40010000 134 135 #define CONFIG_SYS_HZ 1000 136 #define CONFIG_SYS_CLK 166666666 /* CPU Core Clock */ 137 #define CONFIG_SYS_PLL_ODR 0x36 138 #define CONFIG_SYS_PLL_FDR 0x7D 139 140 #define CONFIG_SYS_MBAR 0xFC000000 141 142 /* 143 * Low Level Configuration Settings 144 * (address mappings, register initial values, etc.) 145 * You should know what you are doing if you make changes here. 146 */ 147 /* Definitions for initial stack pointer and data area (in DPRAM) */ 148 #define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 149 #define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in internal SRAM */ 150 #define CONFIG_SYS_INIT_RAM_CTRL 0x221 151 #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ 152 #define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) - 0x10) 153 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 154 155 /* 156 * Start addresses for the final memory configuration 157 * (Set up by the startup code) 158 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 159 */ 160 #define CONFIG_SYS_SDRAM_BASE 0x40000000 161 #define CONFIG_SYS_SDRAM_SIZE 64 /* SDRAM size in MB */ 162 #define CONFIG_SYS_SDRAM_CFG1 0x43711630 163 #define CONFIG_SYS_SDRAM_CFG2 0x56670000 164 #define CONFIG_SYS_SDRAM_CTRL 0xE1002000 165 #define CONFIG_SYS_SDRAM_EMOD 0x80010000 166 #define CONFIG_SYS_SDRAM_MODE 0x00CD0000 167 168 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE + 0x400 169 #define CONFIG_SYS_MEMTEST_END ((CONFIG_SYS_SDRAM_SIZE - 3) << 20) 170 171 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400) 172 #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ 173 174 #define CONFIG_SYS_BOOTPARAMS_LEN 64*1024 175 #define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ 176 177 /* 178 * For booting Linux, the board info and command line data 179 * have to be in the first 8 MB of memory, since this is 180 * the maximum mapped by the Linux kernel during initialization ?? 181 */ 182 #define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20)) 183 #define CONFIG_SYS_BOOTM_LEN (CONFIG_SYS_SDRAM_SIZE << 20) 184 185 /* FLASH organization */ 186 #define CONFIG_SYS_FLASH_CFI 187 #ifdef CONFIG_SYS_FLASH_CFI 188 # define CONFIG_FLASH_CFI_DRIVER 1 189 # define CONFIG_SYS_FLASH_SIZE 0x800000 /* Max size that the board might have */ 190 # define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT 191 # define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ 192 # define CONFIG_SYS_MAX_FLASH_SECT 254 /* max number of sectors on one chip */ 193 # define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ 194 #endif 195 196 #define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE 197 198 /* 199 * Configuration for environment 200 * Environment is embedded in u-boot in the second sector of the flash 201 */ 202 #define CONFIG_ENV_OFFSET 0x2000 203 #define CONFIG_ENV_SIZE 0x1000 204 #define CONFIG_ENV_SECT_SIZE 0x2000 205 #define CONFIG_ENV_IS_IN_FLASH 1 206 207 /* Cache Configuration */ 208 #define CONFIG_SYS_CACHELINE_SIZE 16 209 210 /* Chipselect bank definitions */ 211 /* 212 * CS0 - NOR Flash 213 * CS1 - Available 214 * CS2 - Available 215 * CS3 - Available 216 * CS4 - Available 217 * CS5 - Available 218 */ 219 #define CONFIG_SYS_CS0_BASE 0 220 #define CONFIG_SYS_CS0_MASK 0x007F0001 221 #define CONFIG_SYS_CS0_CTRL 0x00001FA0 222 223 #endif /* _M5208EVBE_H */ 224