xref: /openbmc/u-boot/include/configs/M5208EVBE.h (revision 071bc923)
1 /*
2  * Configuation settings for the Freescale MCF5208EVBe.
3  *
4  * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
5  * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
6  *
7  * See file CREDITS for list of people who contributed to this
8  * project.
9  *
10  * This program is free software; you can redistribute it and/or
11  * modify it under the terms of the GNU General Public License as
12  * published by the Free Software Foundation; either version 2 of
13  * the License, or (at your option) any later version.
14  *
15  * This program is distributed in the hope that it will be useful,
16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
18  * GNU General Public License for more details.
19  *
20  * You should have received a copy of the GNU General Public License
21  * along with this program; if not, write to the Free Software
22  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
23  * MA 02111-1307 USA
24  */
25 
26 #ifndef _M5208EVBE_H
27 #define _M5208EVBE_H
28 
29 /*
30  * High Level Configuration Options
31  * (easy to change)
32  */
33 #define CONFIG_MCF520x		/* define processor family */
34 #define CONFIG_M5208		/* define processor type */
35 
36 #define CONFIG_MCFUART
37 #define CONFIG_SYS_UART_PORT		(0)
38 #define CONFIG_BAUDRATE			115200
39 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }
40 
41 #undef CONFIG_WATCHDOG
42 #define CONFIG_WATCHDOG_TIMEOUT		5000
43 
44 /* Command line configuration */
45 #include <config_cmd_default.h>
46 
47 #define CONFIG_CMD_CACHE
48 #define CONFIG_CMD_ELF
49 #define CONFIG_CMD_FLASH
50 #undef CONFIG_CMD_I2C
51 #define CONFIG_CMD_MEMORY
52 #define CONFIG_CMD_MISC
53 #define CONFIG_CMD_MII
54 #define CONFIG_CMD_NET
55 #define CONFIG_CMD_PING
56 #define CONFIG_CMD_REGINFO
57 
58 #define CONFIG_MCFFEC
59 #ifdef CONFIG_MCFFEC
60 #	define CONFIG_NET_MULTI		1
61 #	define CONFIG_MII		1
62 #	define CONFIG_MII_INIT		1
63 #	define CONFIG_SYS_DISCOVER_PHY
64 #	define CONFIG_SYS_RX_ETH_BUFFER	8
65 #	define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
66 #	define CONFIG_HAS_ETH1
67 
68 #	define CONFIG_SYS_FEC0_PINMUX	0
69 #	define CONFIG_SYS_FEC0_MIIBASE	CONFIG_SYS_FEC0_IOBASE
70 #	define MCFFEC_TOUT_LOOP		50000
71 /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
72 #	ifndef CONFIG_SYS_DISCOVER_PHY
73 #		define FECDUPLEX	FULL
74 #		define FECSPEED		_100BASET
75 #	else
76 #		ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
77 #			define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
78 #		endif
79 #	endif			/* CONFIG_SYS_DISCOVER_PHY */
80 #endif
81 
82 /* Timer */
83 #define CONFIG_MCFTMR
84 #undef CONFIG_MCFPIT
85 
86 /* I2C */
87 #define CONFIG_FSL_I2C
88 #define CONFIG_HARD_I2C			/* I2C with hw support */
89 #undef CONFIG_SOFT_I2C			/* I2C bit-banged */
90 #define CONFIG_SYS_I2C_SPEED		80000
91 #define CONFIG_SYS_I2C_SLAVE		0x7F
92 #define CONFIG_SYS_I2C_OFFSET		0x58000
93 #define CONFIG_SYS_IMMR			CONFIG_SYS_MBAR
94 
95 #define CONFIG_BOOTDELAY		1	/* autoboot after 5 seconds */
96 #define CONFIG_UDP_CHECKSUM
97 
98 #ifdef CONFIG_MCFFEC
99 #	define CONFIG_ETHADDR	00:e0:0c:bc:e5:60
100 #	define CONFIG_IPADDR	192.162.1.2
101 #	define CONFIG_NETMASK	255.255.255.0
102 #	define CONFIG_SERVERIP	192.162.1.1
103 #	define CONFIG_GATEWAYIP	192.162.1.1
104 #	define CONFIG_OVERWRITE_ETHADDR_ONCE
105 #endif				/* CONFIG_MCFFEC */
106 
107 #define CONFIG_HOSTNAME		M5208EVBe
108 #define CONFIG_EXTRA_ENV_SETTINGS		\
109 	"netdev=eth0\0"				\
110 	"loadaddr=40010000\0"			\
111 	"u-boot=u-boot.bin\0"			\
112 	"load=tftp ${loadaddr) ${u-boot}\0"	\
113 	"upd=run load; run prog\0"		\
114 	"prog=prot off 0 3ffff;"		\
115 	"era 0 3ffff;"				\
116 	"cp.b ${loadaddr} 0 ${filesize};"	\
117 	"save\0"				\
118 	""
119 
120 #define CONFIG_PRAM		512	/* 512 KB */
121 #define CONFIG_SYS_PROMPT	"-> "
122 #define CONFIG_SYS_LONGHELP	/* undef to save memory */
123 
124 #ifdef CONFIG_CMD_KGDB
125 #	define CONFIG_SYS_CBSIZE	1024	/* Console I/O Buffer Size */
126 #else
127 #	define CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size */
128 #endif
129 
130 #define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
131 #define CONFIG_SYS_MAXARGS	16		/* max number of cmd args */
132 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Arg Buf Sz */
133 #define CONFIG_SYS_LOAD_ADDR	0x40010000
134 
135 #define CONFIG_SYS_HZ		1000
136 #define CONFIG_SYS_CLK		166666666	/* CPU Core Clock */
137 #define CONFIG_SYS_PLL_ODR	0x36
138 #define CONFIG_SYS_PLL_FDR	0x7D
139 
140 #define CONFIG_SYS_MBAR		0xFC000000
141 
142 /*
143  * Low Level Configuration Settings
144  * (address mappings, register initial values, etc.)
145  * You should know what you are doing if you make changes here.
146  */
147 /* Definitions for initial stack pointer and data area (in DPRAM) */
148 #define CONFIG_SYS_INIT_RAM_ADDR	0x80000000
149 #define CONFIG_SYS_INIT_RAM_SIZE		0x4000	/* Size of used area in internal SRAM */
150 #define CONFIG_SYS_INIT_RAM_CTRL	0x221
151 #define CONFIG_SYS_GBL_DATA_OFFSET	((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 0x10)
152 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
153 
154 /*
155  * Start addresses for the final memory configuration
156  * (Set up by the startup code)
157  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
158  */
159 #define CONFIG_SYS_SDRAM_BASE		0x40000000
160 #define CONFIG_SYS_SDRAM_SIZE		32	/* SDRAM size in MB */
161 #define CONFIG_SYS_SDRAM_CFG1		0x43711630
162 #define CONFIG_SYS_SDRAM_CFG2		0x56670000
163 #define CONFIG_SYS_SDRAM_CTRL		0xE1002000
164 #define CONFIG_SYS_SDRAM_EMOD		0x80010000
165 #define CONFIG_SYS_SDRAM_MODE		0x00CD0000
166 
167 #define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE + 0x400
168 #define CONFIG_SYS_MEMTEST_END		((CONFIG_SYS_SDRAM_SIZE - 3) << 20)
169 
170 #define CONFIG_SYS_MONITOR_BASE		(CONFIG_SYS_FLASH_BASE + 0x400)
171 #define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
172 
173 #define CONFIG_SYS_BOOTPARAMS_LEN	64*1024
174 #define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc() */
175 
176 /*
177  * For booting Linux, the board info and command line data
178  * have to be in the first 8 MB of memory, since this is
179  * the maximum mapped by the Linux kernel during initialization ??
180  */
181 #define CONFIG_SYS_BOOTMAPSZ		(CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
182 #define CONFIG_SYS_BOOTM_LEN		(CONFIG_SYS_SDRAM_SIZE << 20)
183 
184 /* FLASH organization */
185 #define CONFIG_SYS_FLASH_CFI
186 #ifdef CONFIG_SYS_FLASH_CFI
187 #	define CONFIG_FLASH_CFI_DRIVER		1
188 #	define CONFIG_SYS_FLASH_SIZE		0x800000	/* Max size that the board might have */
189 #	define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
190 #	define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
191 #	define CONFIG_SYS_MAX_FLASH_SECT	254	/* max number of sectors on one chip */
192 #	define CONFIG_SYS_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
193 #endif
194 
195 #define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_CS0_BASE
196 
197 /*
198  * Configuration for environment
199  * Environment is embedded in u-boot in the second sector of the flash
200  */
201 #define CONFIG_ENV_OFFSET		0x2000
202 #define CONFIG_ENV_SIZE			0x1000
203 #define CONFIG_ENV_SECT_SIZE		0x2000
204 #define CONFIG_ENV_IS_IN_FLASH		1
205 
206 /* Cache Configuration */
207 #define CONFIG_SYS_CACHELINE_SIZE	16
208 
209 #define ICACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
210 					 CONFIG_SYS_INIT_RAM_SIZE - 8)
211 #define DCACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
212 					 CONFIG_SYS_INIT_RAM_SIZE - 4)
213 #define CONFIG_SYS_ICACHE_INV		(CF_CACR_CINV | CF_CACR_INVI)
214 #define CONFIG_SYS_CACHE_ACR0		(CONFIG_SYS_SDRAM_BASE | \
215 					 CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
216 					 CF_ACR_EN | CF_ACR_SM_ALL)
217 #define CONFIG_SYS_CACHE_ICACR		(CF_CACR_CENB | CF_CACR_CINV | \
218 					 CF_CACR_DISD | CF_CACR_INVI | \
219 					 CF_CACR_CEIB | CF_CACR_DCM | \
220 					 CF_CACR_EUSP)
221 
222 /* Chipselect bank definitions */
223 /*
224  * CS0 - NOR Flash
225  * CS1 - Available
226  * CS2 - Available
227  * CS3 - Available
228  * CS4 - Available
229  * CS5 - Available
230  */
231 #define CONFIG_SYS_CS0_BASE		0
232 #define CONFIG_SYS_CS0_MASK		0x007F0001
233 #define CONFIG_SYS_CS0_CTRL		0x00001FA0
234 
235 #endif				/* _M5208EVBE_H */
236