1 /* 2 * Copyright 2013 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 /* 8 * C29XPCIE board configuration file 9 */ 10 11 #ifndef __CONFIG_H 12 #define __CONFIG_H 13 14 #define CONFIG_PHYS_64BIT 15 16 #ifdef CONFIG_C29XPCIE 17 #define CONFIG_PPC_C29X 18 #endif 19 20 #ifdef CONFIG_SPIFLASH 21 #define CONFIG_RAMBOOT_SPIFLASH 22 #define CONFIG_SYS_TEXT_BASE 0x11000000 23 #define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc 24 #endif 25 26 #ifdef CONFIG_NAND 27 #define CONFIG_SPL 28 #define CONFIG_TPL 29 #ifdef CONFIG_TPL_BUILD 30 #define CONFIG_SPL_NAND_BOOT 31 #define CONFIG_SPL_FLUSH_IMAGE 32 #define CONFIG_SPL_ENV_SUPPORT 33 #define CONFIG_SPL_NAND_INIT 34 #define CONFIG_SPL_SERIAL_SUPPORT 35 #define CONFIG_SPL_LIBGENERIC_SUPPORT 36 #define CONFIG_SPL_LIBCOMMON_SUPPORT 37 #define CONFIG_SPL_I2C_SUPPORT 38 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT 39 #define CONFIG_SPL_NAND_SUPPORT 40 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT 41 #define CONFIG_SPL_COMMON_INIT_DDR 42 #define CONFIG_SPL_MAX_SIZE (128 << 10) 43 #define CONFIG_SPL_TEXT_BASE 0xf8f81000 44 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 45 #define CONFIG_SYS_NAND_U_BOOT_SIZE (832 << 10) 46 #define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000) 47 #define CONFIG_SYS_NAND_U_BOOT_START (0x11000000) 48 #define CONFIG_SYS_NAND_U_BOOT_OFFS ((128 + 128) << 10) 49 #elif defined(CONFIG_SPL_BUILD) 50 #define CONFIG_SPL_INIT_MINIMAL 51 #define CONFIG_SPL_SERIAL_SUPPORT 52 #define CONFIG_SPL_NAND_SUPPORT 53 #define CONFIG_SPL_NAND_MINIMAL 54 #define CONFIG_SPL_FLUSH_IMAGE 55 #define CONFIG_SPL_TEXT_BASE 0xff800000 56 #define CONFIG_SPL_MAX_SIZE 8192 57 #define CONFIG_SYS_NAND_U_BOOT_SIZE (128 << 10) 58 #define CONFIG_SYS_NAND_U_BOOT_DST 0xf8f80000 59 #define CONFIG_SYS_NAND_U_BOOT_START 0xf8f80000 60 #define CONFIG_SYS_NAND_U_BOOT_OFFS (128 << 10) 61 #endif 62 #define CONFIG_SPL_PAD_TO 0x20000 63 #define CONFIG_TPL_PAD_TO 0x20000 64 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 65 #define CONFIG_SYS_TEXT_BASE 0x11001000 66 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" 67 #endif 68 69 #ifndef CONFIG_SYS_TEXT_BASE 70 #define CONFIG_SYS_TEXT_BASE 0xeff40000 71 #endif 72 73 #ifndef CONFIG_RESET_VECTOR_ADDRESS 74 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 75 #endif 76 77 #ifdef CONFIG_SPL_BUILD 78 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE 79 #else 80 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 81 #endif 82 83 #ifdef CONFIG_SPL_BUILD 84 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE 85 #endif 86 87 /* High Level Configuration Options */ 88 #define CONFIG_BOOKE /* BOOKE */ 89 #define CONFIG_E500 /* BOOKE e500 family */ 90 #define CONFIG_FSL_IFC /* Enable IFC Support */ 91 #define CONFIG_SYS_HAS_SERDES /* common SERDES init code */ 92 93 #define CONFIG_PCI /* Enable PCI/PCIE */ 94 #ifdef CONFIG_PCI 95 #define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */ 96 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 97 #define CONFIG_PCI_INDIRECT_BRIDGE 98 #define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ 99 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 100 101 #define CONFIG_CMD_NET 102 #define CONFIG_CMD_PCI 103 104 #define CONFIG_E1000 105 106 /* 107 * PCI Windows 108 * Memory space is mapped 1-1, but I/O space must start from 0. 109 */ 110 /* controller 1, Slot 1, tgtid 1, Base address a000 */ 111 #define CONFIG_SYS_PCIE1_NAME "Slot 1" 112 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 113 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 114 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull 115 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 /* 256M */ 116 #define CONFIG_SYS_PCIE1_IO_VIRT 0xffc00000 117 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 118 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 119 #define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc00000ull 120 121 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 122 123 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 124 #define CONFIG_DOS_PARTITION 125 #endif 126 127 #define CONFIG_FSL_LAW /* Use common FSL init code */ 128 #define CONFIG_TSEC_ENET 129 #define CONFIG_ENV_OVERWRITE 130 131 #define CONFIG_DDR_CLK_FREQ 100000000 132 #define CONFIG_SYS_CLK_FREQ 66666666 133 134 #define CONFIG_HWCONFIG 135 136 /* 137 * These can be toggled for performance analysis, otherwise use default. 138 */ 139 #define CONFIG_L2_CACHE /* toggle L2 cache */ 140 #define CONFIG_BTB /* toggle branch predition */ 141 142 #define CONFIG_ADDR_STREAMING /* toggle addr streaming */ 143 144 #define CONFIG_ENABLE_36BIT_PHYS 145 146 #define CONFIG_ADDR_MAP 1 147 #define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ 148 149 #define CONFIG_SYS_MEMTEST_START 0x00200000 150 #define CONFIG_SYS_MEMTEST_END 0x00400000 151 #define CONFIG_PANIC_HANG 152 153 /* DDR Setup */ 154 #define CONFIG_SYS_FSL_DDR3 155 #define CONFIG_DDR_SPD 156 #define CONFIG_SYS_SPD_BUS_NUM 0 157 #define SPD_EEPROM_ADDRESS 0x50 158 #define CONFIG_SYS_DDR_RAW_TIMING 159 160 /* DDR ECC Setup*/ 161 #define CONFIG_DDR_ECC 162 #define CONFIG_MEM_INIT_VALUE 0xDeadBeef 163 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER 164 165 #define CONFIG_SYS_SDRAM_SIZE 512 166 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 167 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 168 169 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 170 #define CONFIG_CHIP_SELECTS_PER_CTRL 1 171 172 #define CONFIG_SYS_CCSRBAR 0xffe00000 173 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR 174 175 /* Platform SRAM setting */ 176 #define CONFIG_SYS_PLATFORM_SRAM_BASE 0xffb00000 177 #define CONFIG_SYS_PLATFORM_SRAM_BASE_PHYS \ 178 (0xf00000000ull | CONFIG_SYS_PLATFORM_SRAM_BASE) 179 #define CONFIG_SYS_PLATFORM_SRAM_SIZE (512 << 10) 180 181 #ifdef CONFIG_SPL_BUILD 182 #define CONFIG_SYS_NO_FLASH 183 #endif 184 185 /* 186 * IFC Definitions 187 */ 188 /* NOR Flash on IFC */ 189 #define CONFIG_SYS_FLASH_BASE 0xec000000 190 #define CONFIG_SYS_MAX_FLASH_SECT 512 /* 64M */ 191 192 #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) 193 194 #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE_PHYS } 195 #define CONFIG_SYS_MAX_FLASH_BANKS 1 196 197 #define CONFIG_SYS_FLASH_QUIET_TEST 198 #define CONFIG_FLASH_SHOW_PROGRESS 45 199 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* in ms */ 200 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* in ms */ 201 202 /* 16Bit NOR Flash - S29GL512S10TFI01 */ 203 #define CONFIG_SYS_NOR_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ 204 CSPR_PORT_SIZE_16 | \ 205 CSPR_MSEL_NOR | \ 206 CSPR_V) 207 #define CONFIG_SYS_NOR_AMASK IFC_AMASK(64*1024*1024) 208 #define CONFIG_SYS_NOR_CSOR CSOR_NOR_ADM_SHIFT(4) 209 210 #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ 211 FTIM0_NOR_TEADC(0x5) | \ 212 FTIM0_NOR_TEAHC(0x5)) 213 #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ 214 FTIM1_NOR_TRAD_NOR(0x1A) |\ 215 FTIM1_NOR_TSEQRAD_NOR(0x13)) 216 #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ 217 FTIM2_NOR_TCH(0x4) | \ 218 FTIM2_NOR_TWPH(0x0E) | \ 219 FTIM2_NOR_TWP(0x1c)) 220 #define CONFIG_SYS_NOR_FTIM3 0x0 221 222 /* CFI for NOR Flash */ 223 #define CONFIG_FLASH_CFI_DRIVER 224 #define CONFIG_SYS_FLASH_CFI 225 #define CONFIG_SYS_FLASH_EMPTY_INFO 226 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 227 228 /* NAND Flash on IFC */ 229 #define CONFIG_NAND_FSL_IFC 230 #define CONFIG_SYS_NAND_BASE 0xff800000 231 #define CONFIG_SYS_NAND_BASE_PHYS 0xfff800000ull 232 233 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } 234 235 #define CONFIG_SYS_MAX_NAND_DEVICE 1 236 #define CONFIG_MTD_NAND_VERIFY_WRITE 237 #define CONFIG_CMD_NAND 238 #define CONFIG_SYS_NAND_BLOCK_SIZE (1024 * 1024) 239 240 /* 8Bit NAND Flash - K9F1G08U0B */ 241 #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 242 | CSPR_PORT_SIZE_8 \ 243 | CSPR_MSEL_NAND \ 244 | CSPR_V) 245 #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) 246 #define CONFIG_SYS_NAND_OOBSIZE 0x00000280 /* 640b */ 247 #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ 248 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ 249 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ 250 | CSOR_NAND_RAL_3 /* RAL = 3 Bytes */ \ 251 | CSOR_NAND_PGS_8K /* Page Size = 8K */ \ 252 | CSOR_NAND_SPRZ_CSOR_EXT /*oob in csor_ext*/\ 253 | CSOR_NAND_PB(128)) /*128 Pages Per Block*/ 254 #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x01) | \ 255 FTIM0_NAND_TWP(0x0c) | \ 256 FTIM0_NAND_TWCHT(0x08) | \ 257 FTIM0_NAND_TWH(0x06)) 258 #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x28) | \ 259 FTIM1_NAND_TWBE(0x1d) | \ 260 FTIM1_NAND_TRR(0x08) | \ 261 FTIM1_NAND_TRP(0x0c)) 262 #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0c) | \ 263 FTIM2_NAND_TREH(0x0a) | \ 264 FTIM2_NAND_TWHRE(0x18)) 265 #define CONFIG_SYS_NAND_FTIM3 (FTIM3_NAND_TWW(0x04)) 266 267 #define CONFIG_SYS_NAND_DDR_LAW 11 268 269 /* Set up IFC registers for boot location NOR/NAND */ 270 #ifdef CONFIG_NAND 271 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR 272 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK 273 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR 274 #define CONFIG_SYS_CSOR0_EXT CONFIG_SYS_NAND_OOBSIZE 275 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 276 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 277 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 278 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 279 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR_CSPR 280 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK 281 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR 282 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 283 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 284 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 285 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 286 #else 287 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR_CSPR 288 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK 289 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR 290 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 291 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 292 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 293 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 294 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR 295 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK 296 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR 297 #define CONFIG_SYS_CSOR1_EXT CONFIG_SYS_NAND_OOBSIZE 298 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0 299 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1 300 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2 301 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3 302 #endif 303 304 /* CPLD on IFC, selected by CS2 */ 305 #define CONFIG_SYS_CPLD_BASE 0xffdf0000 306 #define CONFIG_SYS_CPLD_BASE_PHYS (0xf00000000ull \ 307 | CONFIG_SYS_CPLD_BASE) 308 309 #define CONFIG_SYS_CSPR2 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \ 310 | CSPR_PORT_SIZE_8 \ 311 | CSPR_MSEL_GPCM \ 312 | CSPR_V) 313 #define CONFIG_SYS_AMASK2 IFC_AMASK(64*1024) 314 #define CONFIG_SYS_CSOR2 0x0 315 /* CPLD Timing parameters for IFC CS2 */ 316 #define CONFIG_SYS_CS2_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ 317 FTIM0_GPCM_TEADC(0x0e) | \ 318 FTIM0_GPCM_TEAHC(0x0e)) 319 #define CONFIG_SYS_CS2_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ 320 FTIM1_GPCM_TRAD(0x1f)) 321 #define CONFIG_SYS_CS2_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ 322 FTIM2_GPCM_TCH(0x0) | \ 323 FTIM2_GPCM_TWP(0x1f)) 324 #define CONFIG_SYS_CS2_FTIM3 0x0 325 326 #if defined(CONFIG_RAMBOOT_SPIFLASH) 327 #define CONFIG_SYS_RAMBOOT 328 #define CONFIG_SYS_EXTRA_ENV_RELOC 329 #endif 330 331 #define CONFIG_BOARD_EARLY_INIT_R 332 333 #define CONFIG_SYS_INIT_RAM_LOCK 334 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 335 #define CONFIG_SYS_INIT_RAM_END 0x00004000 336 337 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END \ 338 - GENERATED_GBL_DATA_SIZE) 339 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 340 341 #define CONFIG_SYS_MONITOR_LEN (512 * 1024) 342 #define CONFIG_SYS_MALLOC_LEN (2 * 1024 * 1024) 343 344 /* 345 * Config the L2 Cache as L2 SRAM 346 */ 347 #if defined(CONFIG_SPL_BUILD) 348 #if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH) 349 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 350 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 351 #define CONFIG_SYS_L2_SIZE (256 << 10) 352 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 353 #define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000 354 #define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 128 * 1024) 355 #define CONFIG_SPL_RELOC_STACK_SIZE (32 << 10) 356 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 160 * 1024) 357 #define CONFIG_SPL_RELOC_MALLOC_SIZE (96 << 10) 358 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024) 359 #elif defined(CONFIG_NAND) 360 #ifdef CONFIG_TPL_BUILD 361 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 362 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 363 #define CONFIG_SYS_L2_SIZE (256 << 10) 364 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 365 #define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000 366 #define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024) 367 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024) 368 #define CONFIG_SPL_RELOC_MALLOC_SIZE (48 << 10) 369 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024) 370 #else 371 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 372 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 373 #define CONFIG_SYS_L2_SIZE (256 << 10) 374 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 375 #define CONFIG_SPL_RELOC_TEXT_BASE (CONFIG_SYS_INIT_L2_END - 0x3000) 376 #define CONFIG_SPL_RELOC_STACK ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF) 377 #endif 378 #endif 379 #endif 380 381 /* Serial Port */ 382 #define CONFIG_CONS_INDEX 1 383 #define CONFIG_SYS_NS16550 384 #define CONFIG_SYS_NS16550_SERIAL 385 #define CONFIG_SYS_NS16550_REG_SIZE 1 386 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 387 388 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL) 389 #define CONFIG_NS16550_MIN_FUNCTIONS 390 #endif 391 392 #define CONFIG_SERIAL_MULTI /* Enable both serial ports */ 393 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 394 395 #define CONFIG_SYS_BAUDRATE_TABLE \ 396 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 397 398 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) 399 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) 400 401 /* Use the HUSH parser */ 402 #define CONFIG_SYS_HUSH_PARSER 403 404 /* 405 * Pass open firmware flat tree 406 */ 407 #define CONFIG_OF_LIBFDT 408 #define CONFIG_OF_BOARD_SETUP 409 #define CONFIG_OF_STDOUT_VIA_ALIAS 410 411 /* new uImage format support */ 412 #define CONFIG_FIT 413 #define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ 414 415 #define CONFIG_SYS_I2C 416 #define CONFIG_SYS_I2C_FSL 417 #define CONFIG_SYS_FSL_I2C_SPEED 400000 418 #define CONFIG_SYS_FSL_I2C2_SPEED 400000 419 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 420 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 421 #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 422 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 423 424 /* I2C EEPROM */ 425 /* enable read and write access to EEPROM */ 426 #define CONFIG_CMD_EEPROM 427 #define CONFIG_SYS_I2C_MULTI_EEPROMS 428 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 429 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 430 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 431 432 #define CONFIG_CMD_I2C 433 434 /* eSPI - Enhanced SPI */ 435 #define CONFIG_FSL_ESPI 436 #define CONFIG_SPI_FLASH 437 #define CONFIG_SPI_FLASH_SPANSION 438 #define CONFIG_SPI_FLASH_EON 439 #define CONFIG_CMD_SF 440 #define CONFIG_SF_DEFAULT_SPEED 10000000 441 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 442 443 #ifdef CONFIG_TSEC_ENET 444 #define CONFIG_NET_MULTI 445 #define CONFIG_MII /* MII PHY management */ 446 #define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */ 447 #define CONFIG_TSEC1 1 448 #define CONFIG_TSEC1_NAME "eTSEC1" 449 #define CONFIG_TSEC2 1 450 #define CONFIG_TSEC2_NAME "eTSEC2" 451 452 /* Default mode is RGMII mode */ 453 #define TSEC1_PHY_ADDR 0 454 #define TSEC2_PHY_ADDR 2 455 456 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 457 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 458 459 #define CONFIG_ETHPRIME "eTSEC1" 460 461 #define CONFIG_PHY_GIGE 462 #endif /* CONFIG_TSEC_ENET */ 463 464 /* 465 * Environment 466 */ 467 #if defined(CONFIG_SYS_RAMBOOT) 468 #if defined(CONFIG_RAMBOOT_SPIFLASH) 469 #define CONFIG_ENV_IS_IN_SPI_FLASH 470 #define CONFIG_ENV_SPI_BUS 0 471 #define CONFIG_ENV_SPI_CS 0 472 #define CONFIG_ENV_SPI_MAX_HZ 10000000 473 #define CONFIG_ENV_SPI_MODE 0 474 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 475 #define CONFIG_ENV_SECT_SIZE 0x10000 476 #define CONFIG_ENV_SIZE 0x2000 477 #endif 478 #elif defined(CONFIG_NAND) 479 #define CONFIG_ENV_IS_IN_NAND 480 #ifdef CONFIG_TPL_BUILD 481 #define CONFIG_ENV_SIZE 0x2000 482 #define CONFIG_ENV_ADDR (CONFIG_SYS_INIT_L2_ADDR + (160 << 10)) 483 #else 484 #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE 485 #define CONFIG_ENV_RANGE CONFIG_ENV_SIZE 486 #endif 487 #define CONFIG_ENV_OFFSET CONFIG_SYS_NAND_BLOCK_SIZE 488 #else 489 #define CONFIG_ENV_IS_IN_FLASH 490 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 491 #define CONFIG_ENV_SIZE 0x2000 492 #define CONFIG_ENV_SECT_SIZE 0x20000 493 #endif 494 495 #define CONFIG_LOADS_ECHO 496 #define CONFIG_SYS_LOADS_BAUD_CHANGE 497 498 /* 499 * Command line configuration. 500 */ 501 #include <config_cmd_default.h> 502 503 #define CONFIG_CMD_ERRATA 504 #define CONFIG_CMD_ELF 505 #define CONFIG_CMD_IRQ 506 #define CONFIG_CMD_MII 507 #define CONFIG_CMD_PING 508 #define CONFIG_CMD_SETEXPR 509 #define CONFIG_CMD_REGINFO 510 511 /* 512 * Miscellaneous configurable options 513 */ 514 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 515 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 516 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 517 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 518 519 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 520 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 521 /* Print Buffer Size */ 522 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 523 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ 524 525 /* 526 * For booting Linux, the board info and command line data 527 * have to be in the first 64 MB of memory, since this is 528 * the maximum mapped by the Linux kernel during initialization. 529 */ 530 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux */ 531 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 532 533 /* 534 * Environment Configuration 535 */ 536 537 #ifdef CONFIG_TSEC_ENET 538 #define CONFIG_HAS_ETH0 539 #define CONFIG_HAS_ETH1 540 #endif 541 542 #define CONFIG_ROOTPATH "/opt/nfsroot" 543 #define CONFIG_BOOTFILE "uImage" 544 #define CONFIG_UBOOTPATH u-boot.bin/* U-Boot image on TFTP server */ 545 546 /* default location for tftp and bootm */ 547 #define CONFIG_LOADADDR 1000000 548 549 #define CONFIG_BOOTDELAY -1 /* -1 disables auto-boot */ 550 551 #define CONFIG_BAUDRATE 115200 552 553 #define CONFIG_DEF_HWCONFIG fsl_ddr:ecc=on 554 555 #define CONFIG_EXTRA_ENV_SETTINGS \ 556 "hwconfig=" __stringify(CONFIG_DEF_HWCONFIG) "\0" \ 557 "netdev=eth0\0" \ 558 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 559 "loadaddr=1000000\0" \ 560 "consoledev=ttyS0\0" \ 561 "ramdiskaddr=2000000\0" \ 562 "ramdiskfile=rootfs.ext2.gz.uboot\0" \ 563 "fdtaddr=c00000\0" \ 564 "fdtfile=name/of/device-tree.dtb\0" \ 565 "othbootargs=ramdisk_size=600000\0" \ 566 567 #define CONFIG_RAMBOOTCOMMAND \ 568 "setenv bootargs root=/dev/ram rw " \ 569 "console=$consoledev,$baudrate $othbootargs; " \ 570 "tftp $ramdiskaddr $ramdiskfile;" \ 571 "tftp $loadaddr $bootfile;" \ 572 "tftp $fdtaddr $fdtfile;" \ 573 "bootm $loadaddr $ramdiskaddr $fdtaddr" 574 575 #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND 576 577 #endif /* __CONFIG_H */ 578