1 /* 2 * Copyright 2013 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 /* 8 * C29XPCIE board configuration file 9 */ 10 11 #ifndef __CONFIG_H 12 #define __CONFIG_H 13 14 #ifdef CONFIG_SPIFLASH 15 #define CONFIG_RAMBOOT_SPIFLASH 16 #define CONFIG_SYS_TEXT_BASE 0x11000000 17 #define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc 18 #endif 19 20 #ifdef CONFIG_NAND 21 #ifdef CONFIG_TPL_BUILD 22 #define CONFIG_SPL_NAND_BOOT 23 #define CONFIG_SPL_FLUSH_IMAGE 24 #define CONFIG_SPL_NAND_INIT 25 #define CONFIG_TPL_DRIVERS_MISC_SUPPORT 26 #define CONFIG_SPL_COMMON_INIT_DDR 27 #define CONFIG_SPL_MAX_SIZE (128 << 10) 28 #define CONFIG_SPL_TEXT_BASE 0xf8f81000 29 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 30 #define CONFIG_SYS_NAND_U_BOOT_SIZE (832 << 10) 31 #define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000) 32 #define CONFIG_SYS_NAND_U_BOOT_START (0x11000000) 33 #define CONFIG_SYS_NAND_U_BOOT_OFFS ((128 + 128) << 10) 34 #elif defined(CONFIG_SPL_BUILD) 35 #define CONFIG_SPL_INIT_MINIMAL 36 #define CONFIG_SPL_NAND_MINIMAL 37 #define CONFIG_SPL_FLUSH_IMAGE 38 #define CONFIG_SPL_TEXT_BASE 0xff800000 39 #define CONFIG_SPL_MAX_SIZE 8192 40 #define CONFIG_SYS_NAND_U_BOOT_SIZE (128 << 10) 41 #define CONFIG_SYS_NAND_U_BOOT_DST 0xf8f80000 42 #define CONFIG_SYS_NAND_U_BOOT_START 0xf8f80000 43 #define CONFIG_SYS_NAND_U_BOOT_OFFS (128 << 10) 44 #endif 45 #define CONFIG_SPL_PAD_TO 0x20000 46 #define CONFIG_TPL_PAD_TO 0x20000 47 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 48 #define CONFIG_SYS_TEXT_BASE 0x11001000 49 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" 50 #endif 51 52 #ifndef CONFIG_SYS_TEXT_BASE 53 #define CONFIG_SYS_TEXT_BASE 0xeff40000 54 #endif 55 56 #ifndef CONFIG_RESET_VECTOR_ADDRESS 57 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 58 #endif 59 60 #ifdef CONFIG_SPL_BUILD 61 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE 62 #else 63 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 64 #endif 65 66 #ifdef CONFIG_SPL_BUILD 67 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE 68 #endif 69 70 /* High Level Configuration Options */ 71 #define CONFIG_SYS_HAS_SERDES /* common SERDES init code */ 72 73 #ifdef CONFIG_PCI 74 #define CONFIG_PCIE1 /* PCIE controller 1 (slot 1) */ 75 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 76 #define CONFIG_PCI_INDIRECT_BRIDGE 77 #define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ 78 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 79 80 #define CONFIG_CMD_PCI 81 82 /* 83 * PCI Windows 84 * Memory space is mapped 1-1, but I/O space must start from 0. 85 */ 86 /* controller 1, Slot 1, tgtid 1, Base address a000 */ 87 #define CONFIG_SYS_PCIE1_NAME "Slot 1" 88 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 89 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 90 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull 91 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 /* 256M */ 92 #define CONFIG_SYS_PCIE1_IO_VIRT 0xffc00000 93 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 94 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 95 #define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc00000ull 96 97 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 98 #endif 99 100 #define CONFIG_TSEC_ENET 101 #define CONFIG_ENV_OVERWRITE 102 103 #define CONFIG_DDR_CLK_FREQ 100000000 104 #define CONFIG_SYS_CLK_FREQ 66666666 105 106 #define CONFIG_HWCONFIG 107 108 /* 109 * These can be toggled for performance analysis, otherwise use default. 110 */ 111 #define CONFIG_L2_CACHE /* toggle L2 cache */ 112 #define CONFIG_BTB /* toggle branch predition */ 113 114 #define CONFIG_ADDR_STREAMING /* toggle addr streaming */ 115 116 #define CONFIG_ENABLE_36BIT_PHYS 117 118 #define CONFIG_ADDR_MAP 1 119 #define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ 120 121 #define CONFIG_SYS_MEMTEST_START 0x00200000 122 #define CONFIG_SYS_MEMTEST_END 0x00400000 123 #define CONFIG_PANIC_HANG 124 125 /* DDR Setup */ 126 #define CONFIG_DDR_SPD 127 #define CONFIG_SYS_SPD_BUS_NUM 0 128 #define SPD_EEPROM_ADDRESS 0x50 129 #define CONFIG_SYS_DDR_RAW_TIMING 130 131 /* DDR ECC Setup*/ 132 #define CONFIG_DDR_ECC 133 #define CONFIG_MEM_INIT_VALUE 0xDeadBeef 134 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER 135 136 #define CONFIG_SYS_SDRAM_SIZE 512 137 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 138 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 139 140 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 141 #define CONFIG_CHIP_SELECTS_PER_CTRL 1 142 143 #define CONFIG_SYS_CCSRBAR 0xffe00000 144 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR 145 146 /* Platform SRAM setting */ 147 #define CONFIG_SYS_PLATFORM_SRAM_BASE 0xffb00000 148 #define CONFIG_SYS_PLATFORM_SRAM_BASE_PHYS \ 149 (0xf00000000ull | CONFIG_SYS_PLATFORM_SRAM_BASE) 150 #define CONFIG_SYS_PLATFORM_SRAM_SIZE (512 << 10) 151 152 /* 153 * IFC Definitions 154 */ 155 /* NOR Flash on IFC */ 156 #define CONFIG_SYS_FLASH_BASE 0xec000000 157 #define CONFIG_SYS_MAX_FLASH_SECT 512 /* 64M */ 158 159 #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) 160 161 #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE_PHYS } 162 #define CONFIG_SYS_MAX_FLASH_BANKS 1 163 164 #define CONFIG_SYS_FLASH_QUIET_TEST 165 #define CONFIG_FLASH_SHOW_PROGRESS 45 166 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* in ms */ 167 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* in ms */ 168 169 /* 16Bit NOR Flash - S29GL512S10TFI01 */ 170 #define CONFIG_SYS_NOR_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ 171 CSPR_PORT_SIZE_16 | \ 172 CSPR_MSEL_NOR | \ 173 CSPR_V) 174 #define CONFIG_SYS_NOR_AMASK IFC_AMASK(64*1024*1024) 175 #define CONFIG_SYS_NOR_CSOR CSOR_NOR_ADM_SHIFT(4) 176 177 #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ 178 FTIM0_NOR_TEADC(0x5) | \ 179 FTIM0_NOR_TEAHC(0x5)) 180 #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ 181 FTIM1_NOR_TRAD_NOR(0x1A) |\ 182 FTIM1_NOR_TSEQRAD_NOR(0x13)) 183 #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ 184 FTIM2_NOR_TCH(0x4) | \ 185 FTIM2_NOR_TWPH(0x0E) | \ 186 FTIM2_NOR_TWP(0x1c)) 187 #define CONFIG_SYS_NOR_FTIM3 0x0 188 189 /* CFI for NOR Flash */ 190 #define CONFIG_FLASH_CFI_DRIVER 191 #define CONFIG_SYS_FLASH_CFI 192 #define CONFIG_SYS_FLASH_EMPTY_INFO 193 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 194 195 /* NAND Flash on IFC */ 196 #define CONFIG_NAND_FSL_IFC 197 #define CONFIG_SYS_NAND_BASE 0xff800000 198 #define CONFIG_SYS_NAND_BASE_PHYS 0xfff800000ull 199 200 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } 201 202 #define CONFIG_SYS_MAX_NAND_DEVICE 1 203 #define CONFIG_SYS_NAND_BLOCK_SIZE (1024 * 1024) 204 205 /* 8Bit NAND Flash - K9F1G08U0B */ 206 #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 207 | CSPR_PORT_SIZE_8 \ 208 | CSPR_MSEL_NAND \ 209 | CSPR_V) 210 #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) 211 #define CONFIG_SYS_NAND_OOBSIZE 0x00000280 /* 640b */ 212 #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ 213 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ 214 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ 215 | CSOR_NAND_RAL_3 /* RAL = 3 Bytes */ \ 216 | CSOR_NAND_PGS_8K /* Page Size = 8K */ \ 217 | CSOR_NAND_SPRZ_CSOR_EXT /*oob in csor_ext*/\ 218 | CSOR_NAND_PB(128)) /*128 Pages Per Block*/ 219 #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x01) | \ 220 FTIM0_NAND_TWP(0x0c) | \ 221 FTIM0_NAND_TWCHT(0x08) | \ 222 FTIM0_NAND_TWH(0x06)) 223 #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x28) | \ 224 FTIM1_NAND_TWBE(0x1d) | \ 225 FTIM1_NAND_TRR(0x08) | \ 226 FTIM1_NAND_TRP(0x0c)) 227 #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0c) | \ 228 FTIM2_NAND_TREH(0x0a) | \ 229 FTIM2_NAND_TWHRE(0x18)) 230 #define CONFIG_SYS_NAND_FTIM3 (FTIM3_NAND_TWW(0x04)) 231 232 #define CONFIG_SYS_NAND_DDR_LAW 11 233 234 /* Set up IFC registers for boot location NOR/NAND */ 235 #ifdef CONFIG_NAND 236 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR 237 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK 238 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR 239 #define CONFIG_SYS_CSOR0_EXT CONFIG_SYS_NAND_OOBSIZE 240 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 241 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 242 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 243 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 244 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR_CSPR 245 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK 246 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR 247 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 248 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 249 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 250 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 251 #else 252 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR_CSPR 253 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK 254 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR 255 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 256 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 257 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 258 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 259 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR 260 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK 261 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR 262 #define CONFIG_SYS_CSOR1_EXT CONFIG_SYS_NAND_OOBSIZE 263 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0 264 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1 265 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2 266 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3 267 #endif 268 269 /* CPLD on IFC, selected by CS2 */ 270 #define CONFIG_SYS_CPLD_BASE 0xffdf0000 271 #define CONFIG_SYS_CPLD_BASE_PHYS (0xf00000000ull \ 272 | CONFIG_SYS_CPLD_BASE) 273 274 #define CONFIG_SYS_CSPR2 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \ 275 | CSPR_PORT_SIZE_8 \ 276 | CSPR_MSEL_GPCM \ 277 | CSPR_V) 278 #define CONFIG_SYS_AMASK2 IFC_AMASK(64*1024) 279 #define CONFIG_SYS_CSOR2 0x0 280 /* CPLD Timing parameters for IFC CS2 */ 281 #define CONFIG_SYS_CS2_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ 282 FTIM0_GPCM_TEADC(0x0e) | \ 283 FTIM0_GPCM_TEAHC(0x0e)) 284 #define CONFIG_SYS_CS2_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ 285 FTIM1_GPCM_TRAD(0x1f)) 286 #define CONFIG_SYS_CS2_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ 287 FTIM2_GPCM_TCH(0x8) | \ 288 FTIM2_GPCM_TWP(0x1f)) 289 #define CONFIG_SYS_CS2_FTIM3 0x0 290 291 #if defined(CONFIG_RAMBOOT_SPIFLASH) 292 #define CONFIG_SYS_RAMBOOT 293 #define CONFIG_SYS_EXTRA_ENV_RELOC 294 #endif 295 296 #define CONFIG_BOARD_EARLY_INIT_R 297 298 #define CONFIG_SYS_INIT_RAM_LOCK 299 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 300 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 301 302 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE \ 303 - GENERATED_GBL_DATA_SIZE) 304 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 305 306 #define CONFIG_SYS_MONITOR_LEN (768 * 1024) 307 #define CONFIG_SYS_MALLOC_LEN (2 * 1024 * 1024) 308 309 /* 310 * Config the L2 Cache as L2 SRAM 311 */ 312 #if defined(CONFIG_SPL_BUILD) 313 #if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH) 314 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 315 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 316 #define CONFIG_SYS_L2_SIZE (256 << 10) 317 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 318 #define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000 319 #define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 128 * 1024) 320 #define CONFIG_SPL_RELOC_STACK_SIZE (32 << 10) 321 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 160 * 1024) 322 #define CONFIG_SPL_RELOC_MALLOC_SIZE (96 << 10) 323 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024) 324 #elif defined(CONFIG_NAND) 325 #ifdef CONFIG_TPL_BUILD 326 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 327 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 328 #define CONFIG_SYS_L2_SIZE (256 << 10) 329 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 330 #define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000 331 #define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024) 332 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024) 333 #define CONFIG_SPL_RELOC_MALLOC_SIZE (48 << 10) 334 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024) 335 #else 336 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 337 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 338 #define CONFIG_SYS_L2_SIZE (256 << 10) 339 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 340 #define CONFIG_SPL_RELOC_TEXT_BASE (CONFIG_SYS_INIT_L2_END - 0x3000) 341 #define CONFIG_SPL_RELOC_STACK ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF) 342 #endif 343 #endif 344 #endif 345 346 /* Serial Port */ 347 #define CONFIG_CONS_INDEX 1 348 #define CONFIG_SYS_NS16550_SERIAL 349 #define CONFIG_SYS_NS16550_REG_SIZE 1 350 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 351 352 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL) 353 #define CONFIG_NS16550_MIN_FUNCTIONS 354 #endif 355 356 #define CONFIG_SYS_BAUDRATE_TABLE \ 357 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 358 359 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) 360 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) 361 362 #define CONFIG_SYS_I2C 363 #define CONFIG_SYS_I2C_FSL 364 #define CONFIG_SYS_FSL_I2C_SPEED 400000 365 #define CONFIG_SYS_FSL_I2C2_SPEED 400000 366 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 367 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 368 #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 369 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 370 371 /* I2C EEPROM */ 372 /* enable read and write access to EEPROM */ 373 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 374 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 375 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 376 377 /* eSPI - Enhanced SPI */ 378 #define CONFIG_SF_DEFAULT_SPEED 10000000 379 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 380 381 #ifdef CONFIG_TSEC_ENET 382 #define CONFIG_MII /* MII PHY management */ 383 #define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */ 384 #define CONFIG_TSEC1 1 385 #define CONFIG_TSEC1_NAME "eTSEC1" 386 #define CONFIG_TSEC2 1 387 #define CONFIG_TSEC2_NAME "eTSEC2" 388 389 /* Default mode is RGMII mode */ 390 #define TSEC1_PHY_ADDR 0 391 #define TSEC2_PHY_ADDR 2 392 393 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 394 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 395 396 #define CONFIG_ETHPRIME "eTSEC1" 397 398 #define CONFIG_PHY_GIGE 399 #endif /* CONFIG_TSEC_ENET */ 400 401 /* 402 * Environment 403 */ 404 #if defined(CONFIG_SYS_RAMBOOT) 405 #if defined(CONFIG_RAMBOOT_SPIFLASH) 406 #define CONFIG_ENV_SPI_BUS 0 407 #define CONFIG_ENV_SPI_CS 0 408 #define CONFIG_ENV_SPI_MAX_HZ 10000000 409 #define CONFIG_ENV_SPI_MODE 0 410 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 411 #define CONFIG_ENV_SECT_SIZE 0x10000 412 #define CONFIG_ENV_SIZE 0x2000 413 #endif 414 #elif defined(CONFIG_NAND) 415 #ifdef CONFIG_TPL_BUILD 416 #define CONFIG_ENV_SIZE 0x2000 417 #define CONFIG_ENV_ADDR (CONFIG_SYS_INIT_L2_ADDR + (160 << 10)) 418 #else 419 #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE 420 #define CONFIG_ENV_RANGE CONFIG_ENV_SIZE 421 #endif 422 #define CONFIG_ENV_OFFSET CONFIG_SYS_NAND_BLOCK_SIZE 423 #else 424 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 425 #define CONFIG_ENV_SIZE 0x2000 426 #define CONFIG_ENV_SECT_SIZE 0x20000 427 #endif 428 429 #define CONFIG_LOADS_ECHO 430 #define CONFIG_SYS_LOADS_BAUD_CHANGE 431 432 /* 433 * Command line configuration. 434 */ 435 #define CONFIG_CMD_REGINFO 436 437 /* 438 * Miscellaneous configurable options 439 */ 440 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 441 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 442 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 443 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 444 445 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 446 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 447 /* Print Buffer Size */ 448 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 449 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ 450 451 /* 452 * For booting Linux, the board info and command line data 453 * have to be in the first 64 MB of memory, since this is 454 * the maximum mapped by the Linux kernel during initialization. 455 */ 456 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux */ 457 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 458 459 /* 460 * Environment Configuration 461 */ 462 463 #ifdef CONFIG_TSEC_ENET 464 #define CONFIG_HAS_ETH0 465 #define CONFIG_HAS_ETH1 466 #endif 467 468 #define CONFIG_ROOTPATH "/opt/nfsroot" 469 #define CONFIG_BOOTFILE "uImage" 470 #define CONFIG_UBOOTPATH u-boot.bin/* U-Boot image on TFTP server */ 471 472 /* default location for tftp and bootm */ 473 #define CONFIG_LOADADDR 1000000 474 475 #define CONFIG_DEF_HWCONFIG fsl_ddr:ecc=on 476 477 #define CONFIG_EXTRA_ENV_SETTINGS \ 478 "hwconfig=" __stringify(CONFIG_DEF_HWCONFIG) "\0" \ 479 "netdev=eth0\0" \ 480 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 481 "loadaddr=1000000\0" \ 482 "consoledev=ttyS0\0" \ 483 "ramdiskaddr=2000000\0" \ 484 "ramdiskfile=rootfs.ext2.gz.uboot\0" \ 485 "fdtaddr=1e00000\0" \ 486 "fdtfile=name/of/device-tree.dtb\0" \ 487 "othbootargs=ramdisk_size=600000\0" \ 488 489 #define CONFIG_RAMBOOTCOMMAND \ 490 "setenv bootargs root=/dev/ram rw " \ 491 "console=$consoledev,$baudrate $othbootargs; " \ 492 "tftp $ramdiskaddr $ramdiskfile;" \ 493 "tftp $loadaddr $bootfile;" \ 494 "tftp $fdtaddr $fdtfile;" \ 495 "bootm $loadaddr $ramdiskaddr $fdtaddr" 496 497 #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND 498 499 #include <asm/fsl_secure_boot.h> 500 501 #endif /* __CONFIG_H */ 502