xref: /openbmc/u-boot/include/configs/C29XPCIE.h (revision 5ec072bb)
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Copyright 2013 Freescale Semiconductor, Inc.
4  */
5 
6 /*
7  * C29XPCIE board configuration file
8  */
9 
10 #ifndef __CONFIG_H
11 #define __CONFIG_H
12 
13 #ifdef CONFIG_SPIFLASH
14 #define CONFIG_RAMBOOT_SPIFLASH
15 #define CONFIG_RESET_VECTOR_ADDRESS	0x110bfffc
16 #endif
17 
18 #ifdef CONFIG_NAND
19 #ifdef CONFIG_TPL_BUILD
20 #define CONFIG_SPL_NAND_BOOT
21 #define CONFIG_SPL_FLUSH_IMAGE
22 #define CONFIG_SPL_NAND_INIT
23 #define CONFIG_TPL_DRIVERS_MISC_SUPPORT
24 #define CONFIG_SPL_COMMON_INIT_DDR
25 #define CONFIG_SPL_MAX_SIZE		(128 << 10)
26 #define CONFIG_TPL_TEXT_BASE		0xf8f81000
27 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
28 #define CONFIG_SYS_NAND_U_BOOT_SIZE	(832 << 10)
29 #define CONFIG_SYS_NAND_U_BOOT_DST	(0x11000000)
30 #define CONFIG_SYS_NAND_U_BOOT_START	(0x11000000)
31 #define CONFIG_SYS_NAND_U_BOOT_OFFS	((128 + 128) << 10)
32 #elif defined(CONFIG_SPL_BUILD)
33 #define CONFIG_SPL_INIT_MINIMAL
34 #define CONFIG_SPL_NAND_MINIMAL
35 #define CONFIG_SPL_FLUSH_IMAGE
36 #define CONFIG_SPL_TEXT_BASE		0xff800000
37 #define CONFIG_SPL_MAX_SIZE		8192
38 #define CONFIG_SYS_NAND_U_BOOT_SIZE	(128 << 10)
39 #define CONFIG_SYS_NAND_U_BOOT_DST	0xf8f80000
40 #define CONFIG_SYS_NAND_U_BOOT_START	0xf8f80000
41 #define CONFIG_SYS_NAND_U_BOOT_OFFS	(128 << 10)
42 #endif
43 #define CONFIG_SPL_PAD_TO		0x20000
44 #define CONFIG_TPL_PAD_TO		0x20000
45 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
46 #define CONFIG_SYS_LDSCRIPT	"arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
47 #endif
48 
49 #ifndef CONFIG_RESET_VECTOR_ADDRESS
50 #define CONFIG_RESET_VECTOR_ADDRESS	0xeffffffc
51 #endif
52 
53 #ifdef CONFIG_TPL_BUILD
54 #define CONFIG_SYS_MONITOR_BASE	CONFIG_TPL_TEXT_BASE
55 #elif defined(CONFIG_SPL_BUILD)
56 #define CONFIG_SYS_MONITOR_BASE	CONFIG_SPL_TEXT_BASE
57 #else
58 #define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE	/* start of monitor */
59 #endif
60 
61 #ifdef CONFIG_SPL_BUILD
62 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
63 #endif
64 
65 /* High Level Configuration Options */
66 #define CONFIG_SYS_HAS_SERDES		/* common SERDES init code */
67 
68 #ifdef CONFIG_PCI
69 #define CONFIG_PCIE1			/* PCIE controller 1 (slot 1) */
70 #define CONFIG_FSL_PCI_INIT		/* Use common FSL init code */
71 #define CONFIG_PCI_INDIRECT_BRIDGE
72 #define CONFIG_FSL_PCIE_RESET		/* need PCIe reset errata */
73 #define CONFIG_SYS_PCI_64BIT		/* enable 64-bit PCI resources */
74 
75 /*
76  * PCI Windows
77  * Memory space is mapped 1-1, but I/O space must start from 0.
78  */
79 /* controller 1, Slot 1, tgtid 1, Base address a000 */
80 #define CONFIG_SYS_PCIE1_NAME		"Slot 1"
81 #define CONFIG_SYS_PCIE1_MEM_VIRT	0x80000000
82 #define CONFIG_SYS_PCIE1_MEM_BUS	0x80000000
83 #define CONFIG_SYS_PCIE1_MEM_PHYS	0xc00000000ull
84 #define CONFIG_SYS_PCIE1_MEM_SIZE	0x10000000	/* 256M */
85 #define CONFIG_SYS_PCIE1_IO_VIRT	0xffc00000
86 #define CONFIG_SYS_PCIE1_IO_BUS		0x00000000
87 #define CONFIG_SYS_PCIE1_IO_SIZE	0x00010000	/* 64k */
88 #define CONFIG_SYS_PCIE1_IO_PHYS	0xfffc00000ull
89 
90 #define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
91 #endif
92 
93 #define CONFIG_ENV_OVERWRITE
94 
95 #define CONFIG_DDR_CLK_FREQ	100000000
96 #define CONFIG_SYS_CLK_FREQ	66666666
97 
98 #define CONFIG_HWCONFIG
99 
100 /*
101  * These can be toggled for performance analysis, otherwise use default.
102  */
103 #define CONFIG_L2_CACHE			/* toggle L2 cache */
104 #define CONFIG_BTB			/* toggle branch predition */
105 
106 
107 #define CONFIG_ENABLE_36BIT_PHYS
108 
109 #define CONFIG_ADDR_MAP			1
110 #define CONFIG_SYS_NUM_ADDR_MAP		16	/* number of TLB1 entries */
111 
112 #define CONFIG_SYS_MEMTEST_START	0x00200000
113 #define CONFIG_SYS_MEMTEST_END		0x00400000
114 
115 /* DDR Setup */
116 #define CONFIG_DDR_SPD
117 #define CONFIG_SYS_SPD_BUS_NUM		0
118 #define SPD_EEPROM_ADDRESS		0x50
119 #define CONFIG_SYS_DDR_RAW_TIMING
120 
121 /* DDR ECC Setup*/
122 #define CONFIG_DDR_ECC
123 #define CONFIG_MEM_INIT_VALUE		0xDeadBeef
124 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
125 
126 #define CONFIG_SYS_SDRAM_SIZE		512
127 #define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000
128 #define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
129 
130 #define CONFIG_DIMM_SLOTS_PER_CTLR	1
131 #define CONFIG_CHIP_SELECTS_PER_CTRL	1
132 
133 #define CONFIG_SYS_CCSRBAR		0xffe00000
134 #define CONFIG_SYS_CCSRBAR_PHYS_LOW	CONFIG_SYS_CCSRBAR
135 
136 /* Platform SRAM setting  */
137 #define CONFIG_SYS_PLATFORM_SRAM_BASE	0xffb00000
138 #define CONFIG_SYS_PLATFORM_SRAM_BASE_PHYS \
139 			(0xf00000000ull | CONFIG_SYS_PLATFORM_SRAM_BASE)
140 #define CONFIG_SYS_PLATFORM_SRAM_SIZE	(512 << 10)
141 
142 /*
143  * IFC Definitions
144  */
145 /* NOR Flash on IFC */
146 #define CONFIG_SYS_FLASH_BASE		0xec000000
147 #define CONFIG_SYS_MAX_FLASH_SECT	512	/* 64M */
148 
149 #define CONFIG_SYS_FLASH_BASE_PHYS	(0xf00000000ull | CONFIG_SYS_FLASH_BASE)
150 
151 #define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE_PHYS }
152 #define CONFIG_SYS_MAX_FLASH_BANKS	1
153 
154 #define CONFIG_SYS_FLASH_QUIET_TEST
155 #define CONFIG_FLASH_SHOW_PROGRESS	45
156 #define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* in ms */
157 #define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* in ms */
158 
159 /* 16Bit NOR Flash - S29GL512S10TFI01 */
160 #define CONFIG_SYS_NOR_CSPR	(CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
161 				CSPR_PORT_SIZE_16 | \
162 				CSPR_MSEL_NOR | \
163 				CSPR_V)
164 #define CONFIG_SYS_NOR_AMASK	IFC_AMASK(64*1024*1024)
165 #define CONFIG_SYS_NOR_CSOR	CSOR_NOR_ADM_SHIFT(4)
166 
167 #define CONFIG_SYS_NOR_FTIM0	(FTIM0_NOR_TACSE(0x4) | \
168 				FTIM0_NOR_TEADC(0x5) | \
169 				FTIM0_NOR_TEAHC(0x5))
170 #define CONFIG_SYS_NOR_FTIM1	(FTIM1_NOR_TACO(0x35) | \
171 				FTIM1_NOR_TRAD_NOR(0x1A) |\
172 				FTIM1_NOR_TSEQRAD_NOR(0x13))
173 #define CONFIG_SYS_NOR_FTIM2	(FTIM2_NOR_TCS(0x4) | \
174 				FTIM2_NOR_TCH(0x4) | \
175 				FTIM2_NOR_TWPH(0x0E) | \
176 				FTIM2_NOR_TWP(0x1c))
177 #define CONFIG_SYS_NOR_FTIM3	0x0
178 
179 /* CFI for NOR Flash */
180 #define CONFIG_SYS_FLASH_EMPTY_INFO
181 
182 /* NAND Flash on IFC */
183 #define CONFIG_NAND_FSL_IFC
184 #define CONFIG_SYS_NAND_BASE		0xff800000
185 #define CONFIG_SYS_NAND_BASE_PHYS	0xfff800000ull
186 
187 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
188 
189 #define CONFIG_SYS_MAX_NAND_DEVICE	1
190 #define CONFIG_SYS_NAND_BLOCK_SIZE	(1024 * 1024)
191 
192 /* 8Bit NAND Flash - K9F1G08U0B */
193 #define CONFIG_SYS_NAND_CSPR	(CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
194 				| CSPR_PORT_SIZE_8 \
195 				| CSPR_MSEL_NAND \
196 				| CSPR_V)
197 #define CONFIG_SYS_NAND_AMASK	IFC_AMASK(64*1024)
198 #define CONFIG_SYS_NAND_OOBSIZE	0x00000280	/* 640b */
199 #define CONFIG_SYS_NAND_CSOR	(CSOR_NAND_ECC_ENC_EN	/* ECC on encode */ \
200 				| CSOR_NAND_ECC_DEC_EN	/* ECC on decode */ \
201 				| CSOR_NAND_ECC_MODE_4	/* 4-bit ECC */ \
202 				| CSOR_NAND_RAL_3	/* RAL = 3 Bytes */ \
203 				| CSOR_NAND_PGS_8K	/* Page Size = 8K */ \
204 				| CSOR_NAND_SPRZ_CSOR_EXT /*oob in csor_ext*/\
205 				| CSOR_NAND_PB(128))	/*128 Pages Per Block*/
206 #define CONFIG_SYS_NAND_FTIM0	(FTIM0_NAND_TCCST(0x01) | \
207 				FTIM0_NAND_TWP(0x0c)   | \
208 				FTIM0_NAND_TWCHT(0x08) | \
209 				FTIM0_NAND_TWH(0x06))
210 #define CONFIG_SYS_NAND_FTIM1	(FTIM1_NAND_TADLE(0x28) | \
211 				FTIM1_NAND_TWBE(0x1d)  | \
212 				FTIM1_NAND_TRR(0x08)   | \
213 				FTIM1_NAND_TRP(0x0c))
214 #define CONFIG_SYS_NAND_FTIM2	(FTIM2_NAND_TRAD(0x0c) | \
215 				FTIM2_NAND_TREH(0x0a) | \
216 				FTIM2_NAND_TWHRE(0x18))
217 #define CONFIG_SYS_NAND_FTIM3	(FTIM3_NAND_TWW(0x04))
218 
219 #define CONFIG_SYS_NAND_DDR_LAW		11
220 
221 /* Set up IFC registers for boot location NOR/NAND */
222 #ifdef CONFIG_NAND
223 #define CONFIG_SYS_CSPR0		CONFIG_SYS_NAND_CSPR
224 #define CONFIG_SYS_AMASK0		CONFIG_SYS_NAND_AMASK
225 #define CONFIG_SYS_CSOR0		CONFIG_SYS_NAND_CSOR
226 #define CONFIG_SYS_CSOR0_EXT		CONFIG_SYS_NAND_OOBSIZE
227 #define CONFIG_SYS_CS0_FTIM0		CONFIG_SYS_NAND_FTIM0
228 #define CONFIG_SYS_CS0_FTIM1		CONFIG_SYS_NAND_FTIM1
229 #define CONFIG_SYS_CS0_FTIM2		CONFIG_SYS_NAND_FTIM2
230 #define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NAND_FTIM3
231 #define CONFIG_SYS_CSPR1		CONFIG_SYS_NOR_CSPR
232 #define CONFIG_SYS_AMASK1		CONFIG_SYS_NOR_AMASK
233 #define CONFIG_SYS_CSOR1		CONFIG_SYS_NOR_CSOR
234 #define CONFIG_SYS_CS1_FTIM0		CONFIG_SYS_NOR_FTIM0
235 #define CONFIG_SYS_CS1_FTIM1		CONFIG_SYS_NOR_FTIM1
236 #define CONFIG_SYS_CS1_FTIM2		CONFIG_SYS_NOR_FTIM2
237 #define CONFIG_SYS_CS1_FTIM3		CONFIG_SYS_NOR_FTIM3
238 #else
239 #define CONFIG_SYS_CSPR0		CONFIG_SYS_NOR_CSPR
240 #define CONFIG_SYS_AMASK0		CONFIG_SYS_NOR_AMASK
241 #define CONFIG_SYS_CSOR0		CONFIG_SYS_NOR_CSOR
242 #define CONFIG_SYS_CS0_FTIM0		CONFIG_SYS_NOR_FTIM0
243 #define CONFIG_SYS_CS0_FTIM1		CONFIG_SYS_NOR_FTIM1
244 #define CONFIG_SYS_CS0_FTIM2		CONFIG_SYS_NOR_FTIM2
245 #define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NOR_FTIM3
246 #define CONFIG_SYS_CSPR1		CONFIG_SYS_NAND_CSPR
247 #define CONFIG_SYS_AMASK1		CONFIG_SYS_NAND_AMASK
248 #define CONFIG_SYS_CSOR1		CONFIG_SYS_NAND_CSOR
249 #define CONFIG_SYS_CSOR1_EXT		CONFIG_SYS_NAND_OOBSIZE
250 #define CONFIG_SYS_CS1_FTIM0		CONFIG_SYS_NAND_FTIM0
251 #define CONFIG_SYS_CS1_FTIM1		CONFIG_SYS_NAND_FTIM1
252 #define CONFIG_SYS_CS1_FTIM2		CONFIG_SYS_NAND_FTIM2
253 #define CONFIG_SYS_CS1_FTIM3		CONFIG_SYS_NAND_FTIM3
254 #endif
255 
256 /* CPLD on IFC, selected by CS2 */
257 #define CONFIG_SYS_CPLD_BASE		0xffdf0000
258 #define CONFIG_SYS_CPLD_BASE_PHYS	(0xf00000000ull \
259 					| CONFIG_SYS_CPLD_BASE)
260 
261 #define CONFIG_SYS_CSPR2	(CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
262 				| CSPR_PORT_SIZE_8 \
263 				| CSPR_MSEL_GPCM \
264 				| CSPR_V)
265 #define CONFIG_SYS_AMASK2	IFC_AMASK(64*1024)
266 #define CONFIG_SYS_CSOR2	0x0
267 /* CPLD Timing parameters for IFC CS2 */
268 #define CONFIG_SYS_CS2_FTIM0	(FTIM0_GPCM_TACSE(0x0e) | \
269 				FTIM0_GPCM_TEADC(0x0e) | \
270 				FTIM0_GPCM_TEAHC(0x0e))
271 #define CONFIG_SYS_CS2_FTIM1	(FTIM1_GPCM_TACO(0x0e) | \
272 				FTIM1_GPCM_TRAD(0x1f))
273 #define CONFIG_SYS_CS2_FTIM2	(FTIM2_GPCM_TCS(0x0e) | \
274 				FTIM2_GPCM_TCH(0x8) | \
275 				FTIM2_GPCM_TWP(0x1f))
276 #define CONFIG_SYS_CS2_FTIM3	0x0
277 
278 #if defined(CONFIG_RAMBOOT_SPIFLASH)
279 #define CONFIG_SYS_RAMBOOT
280 #endif
281 
282 #define CONFIG_SYS_INIT_RAM_LOCK
283 #define CONFIG_SYS_INIT_RAM_ADDR	0xffd00000
284 #define CONFIG_SYS_INIT_RAM_SIZE	0x00004000
285 
286 #define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE \
287 						- GENERATED_GBL_DATA_SIZE)
288 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
289 
290 #define CONFIG_SYS_MONITOR_LEN		(768 * 1024)
291 #define CONFIG_SYS_MALLOC_LEN		(2 * 1024 * 1024)
292 
293 /*
294  * Config the L2 Cache as L2 SRAM
295  */
296 #if defined(CONFIG_SPL_BUILD)
297 #if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH)
298 #define CONFIG_SYS_INIT_L2_ADDR		0xf8f80000
299 #define CONFIG_SYS_INIT_L2_ADDR_PHYS	CONFIG_SYS_INIT_L2_ADDR
300 #define CONFIG_SYS_L2_SIZE		(256 << 10)
301 #define CONFIG_SYS_INIT_L2_END	(CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
302 #define CONFIG_SPL_RELOC_TEXT_BASE	0xf8f81000
303 #define CONFIG_SPL_RELOC_STACK		(CONFIG_SYS_INIT_L2_ADDR + 128 * 1024)
304 #define CONFIG_SPL_RELOC_MALLOC_ADDR	(CONFIG_SYS_INIT_L2_ADDR + 160 * 1024)
305 #define CONFIG_SPL_RELOC_MALLOC_SIZE	(96 << 10)
306 #define CONFIG_SPL_GD_ADDR		(CONFIG_SYS_INIT_L2_ADDR + 112 * 1024)
307 #elif defined(CONFIG_NAND)
308 #ifdef CONFIG_TPL_BUILD
309 #define CONFIG_SYS_INIT_L2_ADDR		0xf8f80000
310 #define CONFIG_SYS_INIT_L2_ADDR_PHYS	CONFIG_SYS_INIT_L2_ADDR
311 #define CONFIG_SYS_L2_SIZE		(256 << 10)
312 #define CONFIG_SYS_INIT_L2_END	(CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
313 #define CONFIG_SPL_RELOC_TEXT_BASE	0xf8f81000
314 #define CONFIG_SPL_RELOC_STACK		(CONFIG_SYS_INIT_L2_ADDR + 192 * 1024)
315 #define CONFIG_SPL_RELOC_MALLOC_ADDR	(CONFIG_SYS_INIT_L2_ADDR + 208 * 1024)
316 #define CONFIG_SPL_RELOC_MALLOC_SIZE	(48 << 10)
317 #define CONFIG_SPL_GD_ADDR		(CONFIG_SYS_INIT_L2_ADDR + 176 * 1024)
318 #else
319 #define CONFIG_SYS_INIT_L2_ADDR		0xf8f80000
320 #define CONFIG_SYS_INIT_L2_ADDR_PHYS	CONFIG_SYS_INIT_L2_ADDR
321 #define CONFIG_SYS_L2_SIZE		(256 << 10)
322 #define CONFIG_SYS_INIT_L2_END	(CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
323 #define CONFIG_SPL_RELOC_TEXT_BASE	(CONFIG_SYS_INIT_L2_END - 0x3000)
324 #define CONFIG_SPL_RELOC_STACK		((CONFIG_SYS_INIT_L2_END - 1) & ~0xF)
325 #endif
326 #endif
327 #endif
328 
329 /* Serial Port */
330 #define CONFIG_SYS_NS16550_SERIAL
331 #define CONFIG_SYS_NS16550_REG_SIZE	1
332 #define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
333 
334 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL)
335 #define CONFIG_NS16550_MIN_FUNCTIONS
336 #endif
337 
338 #define CONFIG_SYS_BAUDRATE_TABLE	\
339 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
340 
341 #define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CCSRBAR+0x4500)
342 #define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR+0x4600)
343 
344 #define CONFIG_SYS_I2C
345 #define CONFIG_SYS_I2C_FSL
346 #define CONFIG_SYS_FSL_I2C_SPEED	400000
347 #define CONFIG_SYS_FSL_I2C2_SPEED	400000
348 #define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
349 #define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
350 #define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
351 #define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100
352 
353 /* I2C EEPROM */
354 /* enable read and write access to EEPROM */
355 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
356 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
357 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
358 
359 /* eSPI - Enhanced SPI */
360 
361 #ifdef CONFIG_TSEC_ENET
362 #define CONFIG_MII_DEFAULT_TSEC	1	/* Allow unregistered phys */
363 #define CONFIG_TSEC1		1
364 #define CONFIG_TSEC1_NAME	"eTSEC1"
365 #define CONFIG_TSEC2		1
366 #define CONFIG_TSEC2_NAME	"eTSEC2"
367 
368 /* Default mode is RGMII mode */
369 #define TSEC1_PHY_ADDR		0
370 #define TSEC2_PHY_ADDR		2
371 
372 #define TSEC1_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)
373 #define TSEC2_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)
374 
375 #define CONFIG_ETHPRIME		"eTSEC1"
376 #endif	/* CONFIG_TSEC_ENET */
377 
378 /*
379  * Environment
380  */
381 #if defined(CONFIG_SYS_RAMBOOT)
382 #if defined(CONFIG_RAMBOOT_SPIFLASH)
383 #define CONFIG_ENV_OFFSET	0x100000	/* 1MB */
384 #define CONFIG_ENV_SECT_SIZE	0x10000
385 #define CONFIG_ENV_SIZE		0x2000
386 #endif
387 #elif defined(CONFIG_NAND)
388 #ifdef CONFIG_TPL_BUILD
389 #define CONFIG_ENV_SIZE		0x2000
390 #define CONFIG_ENV_ADDR		(CONFIG_SYS_INIT_L2_ADDR + (160 << 10))
391 #else
392 #define CONFIG_ENV_SIZE		CONFIG_SYS_NAND_BLOCK_SIZE
393 #define CONFIG_ENV_RANGE	CONFIG_ENV_SIZE
394 #endif
395 #define CONFIG_ENV_OFFSET	CONFIG_SYS_NAND_BLOCK_SIZE
396 #else
397 #define CONFIG_ENV_ADDR	(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
398 #define CONFIG_ENV_SIZE		0x2000
399 #define CONFIG_ENV_SECT_SIZE	0x20000
400 #endif
401 
402 #define CONFIG_LOADS_ECHO
403 #define CONFIG_SYS_LOADS_BAUD_CHANGE
404 
405 /*
406  * Miscellaneous configurable options
407  */
408 #define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
409 
410 /*
411  * For booting Linux, the board info and command line data
412  * have to be in the first 64 MB of memory, since this is
413  * the maximum mapped by the Linux kernel during initialization.
414  */
415 #define CONFIG_SYS_BOOTMAPSZ	(64 << 20) /* Initial Memory map for Linux */
416 #define CONFIG_SYS_BOOTM_LEN	(64 << 20) /* Increase max gunzip size */
417 
418 /*
419  * Environment Configuration
420  */
421 
422 #ifdef CONFIG_TSEC_ENET
423 #define CONFIG_HAS_ETH0
424 #define CONFIG_HAS_ETH1
425 #endif
426 
427 #define CONFIG_ROOTPATH		"/opt/nfsroot"
428 #define CONFIG_BOOTFILE		"uImage"
429 #define CONFIG_UBOOTPATH	u-boot.bin/* U-Boot image on TFTP server */
430 
431 /* default location for tftp and bootm */
432 #define CONFIG_LOADADDR		1000000
433 
434 #define CONFIG_DEF_HWCONFIG	fsl_ddr:ecc=on
435 
436 #define	CONFIG_EXTRA_ENV_SETTINGS				\
437 	"hwconfig=" __stringify(CONFIG_DEF_HWCONFIG)  "\0"	\
438 	"netdev=eth0\0"						\
439 	"uboot=" __stringify(CONFIG_UBOOTPATH) "\0"		\
440 	"loadaddr=1000000\0"				\
441 	"consoledev=ttyS0\0"				\
442 	"ramdiskaddr=2000000\0"				\
443 	"ramdiskfile=rootfs.ext2.gz.uboot\0"		\
444 	"fdtaddr=1e00000\0"				\
445 	"fdtfile=name/of/device-tree.dtb\0"			\
446 	"othbootargs=ramdisk_size=600000\0"		\
447 
448 #define CONFIG_RAMBOOTCOMMAND			\
449 	"setenv bootargs root=/dev/ram rw "	\
450 	"console=$consoledev,$baudrate $othbootargs; "	\
451 	"tftp $ramdiskaddr $ramdiskfile;"	\
452 	"tftp $loadaddr $bootfile;"		\
453 	"tftp $fdtaddr $fdtfile;"		\
454 	"bootm $loadaddr $ramdiskaddr $fdtaddr"
455 
456 #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND
457 
458 #include <asm/fsl_secure_boot.h>
459 
460 #endif	/* __CONFIG_H */
461