1 /* 2 * Copyright 2013 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 /* 8 * C29XPCIE board configuration file 9 */ 10 11 #ifndef __CONFIG_H 12 #define __CONFIG_H 13 14 #define CONFIG_PHYS_64BIT 15 #define CONFIG_SYS_GENERIC_BOARD 16 #define CONFIG_DISPLAY_BOARDINFO 17 18 #ifdef CONFIG_C29XPCIE 19 #define CONFIG_PPC_C29X 20 #endif 21 22 #ifdef CONFIG_SPIFLASH 23 #define CONFIG_RAMBOOT_SPIFLASH 24 #define CONFIG_SYS_TEXT_BASE 0x11000000 25 #define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc 26 #endif 27 28 #ifdef CONFIG_NAND 29 #ifdef CONFIG_TPL_BUILD 30 #define CONFIG_SPL_NAND_BOOT 31 #define CONFIG_SPL_FLUSH_IMAGE 32 #define CONFIG_SPL_ENV_SUPPORT 33 #define CONFIG_SPL_NAND_INIT 34 #define CONFIG_SPL_SERIAL_SUPPORT 35 #define CONFIG_SPL_LIBGENERIC_SUPPORT 36 #define CONFIG_SPL_LIBCOMMON_SUPPORT 37 #define CONFIG_SPL_I2C_SUPPORT 38 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT 39 #define CONFIG_SPL_NAND_SUPPORT 40 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT 41 #define CONFIG_SPL_COMMON_INIT_DDR 42 #define CONFIG_SPL_MAX_SIZE (128 << 10) 43 #define CONFIG_SPL_TEXT_BASE 0xf8f81000 44 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 45 #define CONFIG_SYS_NAND_U_BOOT_SIZE (832 << 10) 46 #define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000) 47 #define CONFIG_SYS_NAND_U_BOOT_START (0x11000000) 48 #define CONFIG_SYS_NAND_U_BOOT_OFFS ((128 + 128) << 10) 49 #elif defined(CONFIG_SPL_BUILD) 50 #define CONFIG_SPL_INIT_MINIMAL 51 #define CONFIG_SPL_SERIAL_SUPPORT 52 #define CONFIG_SPL_NAND_SUPPORT 53 #define CONFIG_SPL_NAND_MINIMAL 54 #define CONFIG_SPL_FLUSH_IMAGE 55 #define CONFIG_SPL_TEXT_BASE 0xff800000 56 #define CONFIG_SPL_MAX_SIZE 8192 57 #define CONFIG_SYS_NAND_U_BOOT_SIZE (128 << 10) 58 #define CONFIG_SYS_NAND_U_BOOT_DST 0xf8f80000 59 #define CONFIG_SYS_NAND_U_BOOT_START 0xf8f80000 60 #define CONFIG_SYS_NAND_U_BOOT_OFFS (128 << 10) 61 #endif 62 #define CONFIG_SPL_PAD_TO 0x20000 63 #define CONFIG_TPL_PAD_TO 0x20000 64 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 65 #define CONFIG_SYS_TEXT_BASE 0x11001000 66 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" 67 #endif 68 69 #ifndef CONFIG_SYS_TEXT_BASE 70 #define CONFIG_SYS_TEXT_BASE 0xeff40000 71 #endif 72 73 #ifndef CONFIG_RESET_VECTOR_ADDRESS 74 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 75 #endif 76 77 #ifdef CONFIG_SPL_BUILD 78 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE 79 #else 80 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 81 #endif 82 83 #ifdef CONFIG_SPL_BUILD 84 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE 85 #endif 86 87 /* High Level Configuration Options */ 88 #define CONFIG_BOOKE /* BOOKE */ 89 #define CONFIG_E500 /* BOOKE e500 family */ 90 #define CONFIG_FSL_IFC /* Enable IFC Support */ 91 #define CONFIG_FSL_CAAM /* Enable SEC/CAAM */ 92 #define CONFIG_SYS_HAS_SERDES /* common SERDES init code */ 93 94 #define CONFIG_PCI /* Enable PCI/PCIE */ 95 #ifdef CONFIG_PCI 96 #define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */ 97 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 98 #define CONFIG_PCI_INDIRECT_BRIDGE 99 #define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ 100 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 101 102 #define CONFIG_CMD_NET 103 #define CONFIG_CMD_PCI 104 105 #define CONFIG_E1000 106 107 /* 108 * PCI Windows 109 * Memory space is mapped 1-1, but I/O space must start from 0. 110 */ 111 /* controller 1, Slot 1, tgtid 1, Base address a000 */ 112 #define CONFIG_SYS_PCIE1_NAME "Slot 1" 113 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 114 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 115 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull 116 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 /* 256M */ 117 #define CONFIG_SYS_PCIE1_IO_VIRT 0xffc00000 118 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 119 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 120 #define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc00000ull 121 122 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 123 124 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 125 #define CONFIG_DOS_PARTITION 126 #endif 127 128 #define CONFIG_FSL_LAW /* Use common FSL init code */ 129 #define CONFIG_TSEC_ENET 130 #define CONFIG_ENV_OVERWRITE 131 132 #define CONFIG_DDR_CLK_FREQ 100000000 133 #define CONFIG_SYS_CLK_FREQ 66666666 134 135 #define CONFIG_HWCONFIG 136 137 /* 138 * These can be toggled for performance analysis, otherwise use default. 139 */ 140 #define CONFIG_L2_CACHE /* toggle L2 cache */ 141 #define CONFIG_BTB /* toggle branch predition */ 142 143 #define CONFIG_ADDR_STREAMING /* toggle addr streaming */ 144 145 #define CONFIG_ENABLE_36BIT_PHYS 146 147 #define CONFIG_ADDR_MAP 1 148 #define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ 149 150 #define CONFIG_SYS_MEMTEST_START 0x00200000 151 #define CONFIG_SYS_MEMTEST_END 0x00400000 152 #define CONFIG_PANIC_HANG 153 154 /* DDR Setup */ 155 #define CONFIG_SYS_FSL_DDR3 156 #define CONFIG_DDR_SPD 157 #define CONFIG_SYS_SPD_BUS_NUM 0 158 #define SPD_EEPROM_ADDRESS 0x50 159 #define CONFIG_SYS_DDR_RAW_TIMING 160 161 /* DDR ECC Setup*/ 162 #define CONFIG_DDR_ECC 163 #define CONFIG_MEM_INIT_VALUE 0xDeadBeef 164 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER 165 166 #define CONFIG_SYS_SDRAM_SIZE 512 167 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 168 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 169 170 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 171 #define CONFIG_CHIP_SELECTS_PER_CTRL 1 172 173 #define CONFIG_SYS_CCSRBAR 0xffe00000 174 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR 175 176 /* Platform SRAM setting */ 177 #define CONFIG_SYS_PLATFORM_SRAM_BASE 0xffb00000 178 #define CONFIG_SYS_PLATFORM_SRAM_BASE_PHYS \ 179 (0xf00000000ull | CONFIG_SYS_PLATFORM_SRAM_BASE) 180 #define CONFIG_SYS_PLATFORM_SRAM_SIZE (512 << 10) 181 182 #ifdef CONFIG_SPL_BUILD 183 #define CONFIG_SYS_NO_FLASH 184 #endif 185 186 /* 187 * IFC Definitions 188 */ 189 /* NOR Flash on IFC */ 190 #define CONFIG_SYS_FLASH_BASE 0xec000000 191 #define CONFIG_SYS_MAX_FLASH_SECT 512 /* 64M */ 192 193 #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) 194 195 #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE_PHYS } 196 #define CONFIG_SYS_MAX_FLASH_BANKS 1 197 198 #define CONFIG_SYS_FLASH_QUIET_TEST 199 #define CONFIG_FLASH_SHOW_PROGRESS 45 200 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* in ms */ 201 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* in ms */ 202 203 /* 16Bit NOR Flash - S29GL512S10TFI01 */ 204 #define CONFIG_SYS_NOR_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ 205 CSPR_PORT_SIZE_16 | \ 206 CSPR_MSEL_NOR | \ 207 CSPR_V) 208 #define CONFIG_SYS_NOR_AMASK IFC_AMASK(64*1024*1024) 209 #define CONFIG_SYS_NOR_CSOR CSOR_NOR_ADM_SHIFT(4) 210 211 #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ 212 FTIM0_NOR_TEADC(0x5) | \ 213 FTIM0_NOR_TEAHC(0x5)) 214 #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ 215 FTIM1_NOR_TRAD_NOR(0x1A) |\ 216 FTIM1_NOR_TSEQRAD_NOR(0x13)) 217 #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ 218 FTIM2_NOR_TCH(0x4) | \ 219 FTIM2_NOR_TWPH(0x0E) | \ 220 FTIM2_NOR_TWP(0x1c)) 221 #define CONFIG_SYS_NOR_FTIM3 0x0 222 223 /* CFI for NOR Flash */ 224 #define CONFIG_FLASH_CFI_DRIVER 225 #define CONFIG_SYS_FLASH_CFI 226 #define CONFIG_SYS_FLASH_EMPTY_INFO 227 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 228 229 /* NAND Flash on IFC */ 230 #define CONFIG_NAND_FSL_IFC 231 #define CONFIG_SYS_NAND_BASE 0xff800000 232 #define CONFIG_SYS_NAND_BASE_PHYS 0xfff800000ull 233 234 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } 235 236 #define CONFIG_SYS_MAX_NAND_DEVICE 1 237 #define CONFIG_MTD_NAND_VERIFY_WRITE 238 #define CONFIG_CMD_NAND 239 #define CONFIG_SYS_NAND_BLOCK_SIZE (1024 * 1024) 240 241 /* 8Bit NAND Flash - K9F1G08U0B */ 242 #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 243 | CSPR_PORT_SIZE_8 \ 244 | CSPR_MSEL_NAND \ 245 | CSPR_V) 246 #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) 247 #define CONFIG_SYS_NAND_OOBSIZE 0x00000280 /* 640b */ 248 #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ 249 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ 250 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ 251 | CSOR_NAND_RAL_3 /* RAL = 3 Bytes */ \ 252 | CSOR_NAND_PGS_8K /* Page Size = 8K */ \ 253 | CSOR_NAND_SPRZ_CSOR_EXT /*oob in csor_ext*/\ 254 | CSOR_NAND_PB(128)) /*128 Pages Per Block*/ 255 #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x01) | \ 256 FTIM0_NAND_TWP(0x0c) | \ 257 FTIM0_NAND_TWCHT(0x08) | \ 258 FTIM0_NAND_TWH(0x06)) 259 #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x28) | \ 260 FTIM1_NAND_TWBE(0x1d) | \ 261 FTIM1_NAND_TRR(0x08) | \ 262 FTIM1_NAND_TRP(0x0c)) 263 #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0c) | \ 264 FTIM2_NAND_TREH(0x0a) | \ 265 FTIM2_NAND_TWHRE(0x18)) 266 #define CONFIG_SYS_NAND_FTIM3 (FTIM3_NAND_TWW(0x04)) 267 268 #define CONFIG_SYS_NAND_DDR_LAW 11 269 270 /* Set up IFC registers for boot location NOR/NAND */ 271 #ifdef CONFIG_NAND 272 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR 273 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK 274 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR 275 #define CONFIG_SYS_CSOR0_EXT CONFIG_SYS_NAND_OOBSIZE 276 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 277 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 278 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 279 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 280 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR_CSPR 281 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK 282 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR 283 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 284 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 285 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 286 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 287 #else 288 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR_CSPR 289 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK 290 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR 291 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 292 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 293 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 294 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 295 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR 296 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK 297 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR 298 #define CONFIG_SYS_CSOR1_EXT CONFIG_SYS_NAND_OOBSIZE 299 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0 300 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1 301 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2 302 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3 303 #endif 304 305 /* CPLD on IFC, selected by CS2 */ 306 #define CONFIG_SYS_CPLD_BASE 0xffdf0000 307 #define CONFIG_SYS_CPLD_BASE_PHYS (0xf00000000ull \ 308 | CONFIG_SYS_CPLD_BASE) 309 310 #define CONFIG_SYS_CSPR2 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \ 311 | CSPR_PORT_SIZE_8 \ 312 | CSPR_MSEL_GPCM \ 313 | CSPR_V) 314 #define CONFIG_SYS_AMASK2 IFC_AMASK(64*1024) 315 #define CONFIG_SYS_CSOR2 0x0 316 /* CPLD Timing parameters for IFC CS2 */ 317 #define CONFIG_SYS_CS2_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ 318 FTIM0_GPCM_TEADC(0x0e) | \ 319 FTIM0_GPCM_TEAHC(0x0e)) 320 #define CONFIG_SYS_CS2_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ 321 FTIM1_GPCM_TRAD(0x1f)) 322 #define CONFIG_SYS_CS2_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ 323 FTIM2_GPCM_TCH(0x8) | \ 324 FTIM2_GPCM_TWP(0x1f)) 325 #define CONFIG_SYS_CS2_FTIM3 0x0 326 327 #if defined(CONFIG_RAMBOOT_SPIFLASH) 328 #define CONFIG_SYS_RAMBOOT 329 #define CONFIG_SYS_EXTRA_ENV_RELOC 330 #endif 331 332 #define CONFIG_BOARD_EARLY_INIT_R 333 334 #define CONFIG_SYS_INIT_RAM_LOCK 335 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 336 #define CONFIG_SYS_INIT_RAM_END 0x00004000 337 338 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END \ 339 - GENERATED_GBL_DATA_SIZE) 340 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 341 342 #define CONFIG_SYS_MONITOR_LEN (768 * 1024) 343 #define CONFIG_SYS_MALLOC_LEN (2 * 1024 * 1024) 344 345 /* 346 * Config the L2 Cache as L2 SRAM 347 */ 348 #if defined(CONFIG_SPL_BUILD) 349 #if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH) 350 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 351 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 352 #define CONFIG_SYS_L2_SIZE (256 << 10) 353 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 354 #define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000 355 #define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 128 * 1024) 356 #define CONFIG_SPL_RELOC_STACK_SIZE (32 << 10) 357 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 160 * 1024) 358 #define CONFIG_SPL_RELOC_MALLOC_SIZE (96 << 10) 359 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024) 360 #elif defined(CONFIG_NAND) 361 #ifdef CONFIG_TPL_BUILD 362 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 363 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 364 #define CONFIG_SYS_L2_SIZE (256 << 10) 365 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 366 #define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000 367 #define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024) 368 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024) 369 #define CONFIG_SPL_RELOC_MALLOC_SIZE (48 << 10) 370 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024) 371 #else 372 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 373 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR 374 #define CONFIG_SYS_L2_SIZE (256 << 10) 375 #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) 376 #define CONFIG_SPL_RELOC_TEXT_BASE (CONFIG_SYS_INIT_L2_END - 0x3000) 377 #define CONFIG_SPL_RELOC_STACK ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF) 378 #endif 379 #endif 380 #endif 381 382 /* Serial Port */ 383 #define CONFIG_CONS_INDEX 1 384 #define CONFIG_SYS_NS16550 385 #define CONFIG_SYS_NS16550_SERIAL 386 #define CONFIG_SYS_NS16550_REG_SIZE 1 387 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 388 389 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL) 390 #define CONFIG_NS16550_MIN_FUNCTIONS 391 #endif 392 393 #define CONFIG_SERIAL_MULTI /* Enable both serial ports */ 394 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 395 396 #define CONFIG_SYS_BAUDRATE_TABLE \ 397 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 398 399 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) 400 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) 401 402 /* Use the HUSH parser */ 403 #define CONFIG_SYS_HUSH_PARSER 404 405 /* 406 * Pass open firmware flat tree 407 */ 408 #define CONFIG_OF_LIBFDT 409 #define CONFIG_OF_BOARD_SETUP 410 #define CONFIG_OF_STDOUT_VIA_ALIAS 411 412 /* new uImage format support */ 413 #define CONFIG_FIT 414 #define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ 415 416 #define CONFIG_SYS_I2C 417 #define CONFIG_SYS_I2C_FSL 418 #define CONFIG_SYS_FSL_I2C_SPEED 400000 419 #define CONFIG_SYS_FSL_I2C2_SPEED 400000 420 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 421 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 422 #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 423 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 424 425 /* I2C EEPROM */ 426 /* enable read and write access to EEPROM */ 427 #define CONFIG_CMD_EEPROM 428 #define CONFIG_SYS_I2C_MULTI_EEPROMS 429 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 430 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 431 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 432 433 #define CONFIG_CMD_I2C 434 435 /* eSPI - Enhanced SPI */ 436 #define CONFIG_FSL_ESPI 437 #define CONFIG_SPI_FLASH 438 #define CONFIG_SPI_FLASH_SPANSION 439 #define CONFIG_SPI_FLASH_EON 440 #define CONFIG_CMD_SF 441 #define CONFIG_SF_DEFAULT_SPEED 10000000 442 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 443 444 #ifdef CONFIG_TSEC_ENET 445 #define CONFIG_NET_MULTI 446 #define CONFIG_MII /* MII PHY management */ 447 #define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */ 448 #define CONFIG_TSEC1 1 449 #define CONFIG_TSEC1_NAME "eTSEC1" 450 #define CONFIG_TSEC2 1 451 #define CONFIG_TSEC2_NAME "eTSEC2" 452 453 /* Default mode is RGMII mode */ 454 #define TSEC1_PHY_ADDR 0 455 #define TSEC2_PHY_ADDR 2 456 457 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 458 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 459 460 #define CONFIG_ETHPRIME "eTSEC1" 461 462 #define CONFIG_PHY_GIGE 463 #endif /* CONFIG_TSEC_ENET */ 464 465 /* 466 * Environment 467 */ 468 #if defined(CONFIG_SYS_RAMBOOT) 469 #if defined(CONFIG_RAMBOOT_SPIFLASH) 470 #define CONFIG_ENV_IS_IN_SPI_FLASH 471 #define CONFIG_ENV_SPI_BUS 0 472 #define CONFIG_ENV_SPI_CS 0 473 #define CONFIG_ENV_SPI_MAX_HZ 10000000 474 #define CONFIG_ENV_SPI_MODE 0 475 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 476 #define CONFIG_ENV_SECT_SIZE 0x10000 477 #define CONFIG_ENV_SIZE 0x2000 478 #endif 479 #elif defined(CONFIG_NAND) 480 #define CONFIG_ENV_IS_IN_NAND 481 #ifdef CONFIG_TPL_BUILD 482 #define CONFIG_ENV_SIZE 0x2000 483 #define CONFIG_ENV_ADDR (CONFIG_SYS_INIT_L2_ADDR + (160 << 10)) 484 #else 485 #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE 486 #define CONFIG_ENV_RANGE CONFIG_ENV_SIZE 487 #endif 488 #define CONFIG_ENV_OFFSET CONFIG_SYS_NAND_BLOCK_SIZE 489 #else 490 #define CONFIG_ENV_IS_IN_FLASH 491 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 492 #define CONFIG_ENV_SIZE 0x2000 493 #define CONFIG_ENV_SECT_SIZE 0x20000 494 #endif 495 496 #define CONFIG_LOADS_ECHO 497 #define CONFIG_SYS_LOADS_BAUD_CHANGE 498 499 /* 500 * Command line configuration. 501 */ 502 #include <config_cmd_default.h> 503 504 #define CONFIG_CMD_ERRATA 505 #define CONFIG_CMD_ELF 506 #define CONFIG_CMD_IRQ 507 #define CONFIG_CMD_MII 508 #define CONFIG_CMD_PING 509 #define CONFIG_CMD_SETEXPR 510 #define CONFIG_CMD_REGINFO 511 512 /* Hash command with SHA acceleration supported in hardware */ 513 #ifdef CONFIG_FSL_CAAM 514 #define CONFIG_CMD_HASH 515 #define CONFIG_SHA_HW_ACCEL 516 #endif 517 518 /* 519 * Miscellaneous configurable options 520 */ 521 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 522 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 523 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 524 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 525 526 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 527 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 528 /* Print Buffer Size */ 529 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 530 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ 531 532 /* 533 * For booting Linux, the board info and command line data 534 * have to be in the first 64 MB of memory, since this is 535 * the maximum mapped by the Linux kernel during initialization. 536 */ 537 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux */ 538 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 539 540 /* 541 * Environment Configuration 542 */ 543 544 #ifdef CONFIG_TSEC_ENET 545 #define CONFIG_HAS_ETH0 546 #define CONFIG_HAS_ETH1 547 #endif 548 549 #define CONFIG_ROOTPATH "/opt/nfsroot" 550 #define CONFIG_BOOTFILE "uImage" 551 #define CONFIG_UBOOTPATH u-boot.bin/* U-Boot image on TFTP server */ 552 553 /* default location for tftp and bootm */ 554 #define CONFIG_LOADADDR 1000000 555 556 #define CONFIG_BOOTDELAY -1 /* -1 disables auto-boot */ 557 558 #define CONFIG_BAUDRATE 115200 559 560 #define CONFIG_DEF_HWCONFIG fsl_ddr:ecc=on 561 562 #define CONFIG_EXTRA_ENV_SETTINGS \ 563 "hwconfig=" __stringify(CONFIG_DEF_HWCONFIG) "\0" \ 564 "netdev=eth0\0" \ 565 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 566 "loadaddr=1000000\0" \ 567 "consoledev=ttyS0\0" \ 568 "ramdiskaddr=2000000\0" \ 569 "ramdiskfile=rootfs.ext2.gz.uboot\0" \ 570 "fdtaddr=c00000\0" \ 571 "fdtfile=name/of/device-tree.dtb\0" \ 572 "othbootargs=ramdisk_size=600000\0" \ 573 574 #define CONFIG_RAMBOOTCOMMAND \ 575 "setenv bootargs root=/dev/ram rw " \ 576 "console=$consoledev,$baudrate $othbootargs; " \ 577 "tftp $ramdiskaddr $ramdiskfile;" \ 578 "tftp $loadaddr $bootfile;" \ 579 "tftp $fdtaddr $fdtfile;" \ 580 "bootm $loadaddr $ramdiskaddr $fdtaddr" 581 582 #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND 583 584 #include <asm/fsl_secure_boot.h> 585 586 #endif /* __CONFIG_H */ 587