1 /* 2 * Copyright 2013 Freescale Semiconductor, Inc. 3 * 4 * See file CREDITS for list of people who contributed to this 5 * project. 6 * 7 * This program is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU General Public License as 9 * published by the Free Software Foundation; either version 2 of 10 * the License, or (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the Free Software 19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 20 * MA 02111-1307 USA 21 */ 22 23 /* 24 * BSC9132 QDS board configuration file 25 */ 26 27 #ifndef __CONFIG_H 28 #define __CONFIG_H 29 30 #ifdef CONFIG_BSC9132QDS 31 #define CONFIG_BSC9132 32 #endif 33 34 #define CONFIG_MISC_INIT_R 35 36 #ifdef CONFIG_SDCARD 37 #define CONFIG_RAMBOOT_SDCARD 38 #define CONFIG_SYS_RAMBOOT 39 #define CONFIG_SYS_EXTRA_ENV_RELOC 40 #define CONFIG_SYS_TEXT_BASE 0x11000000 41 #define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc 42 #endif 43 #define CONFIG_SYS_FSL_ERRATUM_IFC_A002769 1 44 #ifdef CONFIG_SPIFLASH 45 #define CONFIG_RAMBOOT_SPIFLASH 46 #define CONFIG_SYS_RAMBOOT 47 #define CONFIG_SYS_EXTRA_ENV_RELOC 48 #define CONFIG_SYS_TEXT_BASE 0x11000000 49 #define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc 50 #endif 51 52 #ifdef CONFIG_NAND 53 #define CONFIG_SPL 54 #define CONFIG_SPL_INIT_MINIMAL 55 #define CONFIG_SPL_SERIAL_SUPPORT 56 #define CONFIG_SPL_NAND_SUPPORT 57 #define CONFIG_SPL_NAND_MINIMAL 58 #define CONFIG_SPL_FLUSH_IMAGE 59 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 60 61 #define CONFIG_SYS_TEXT_BASE 0x00201000 62 #define CONFIG_SPL_TEXT_BASE 0xFFFFE000 63 #define CONFIG_SPL_MAX_SIZE 8192 64 #define CONFIG_SPL_RELOC_TEXT_BASE 0x00100000 65 #define CONFIG_SPL_RELOC_STACK 0x00100000 66 #define CONFIG_SYS_NAND_U_BOOT_SIZE ((512 << 10) - 0x2000) 67 #define CONFIG_SYS_NAND_U_BOOT_DST (0x00200000 - CONFIG_SPL_MAX_SIZE) 68 #define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 69 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0 70 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" 71 #endif 72 73 #ifndef CONFIG_SYS_TEXT_BASE 74 #define CONFIG_SYS_TEXT_BASE 0x8ff80000 75 #endif 76 77 #ifndef CONFIG_RESET_VECTOR_ADDRESS 78 #define CONFIG_RESET_VECTOR_ADDRESS 0x8ffffffc 79 #endif 80 81 #ifdef CONFIG_SPL_BUILD 82 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE 83 #else 84 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 85 #endif 86 87 /* High Level Configuration Options */ 88 #define CONFIG_BOOKE /* BOOKE */ 89 #define CONFIG_E500 /* BOOKE e500 family */ 90 #define CONFIG_MPC85xx 91 #define CONFIG_FSL_IFC /* Enable IFC Support */ 92 #define CONFIG_SYS_HAS_SERDES /* common SERDES init code */ 93 94 #define CONFIG_PCI /* Enable PCI/PCIE */ 95 #if defined(CONFIG_PCI) 96 #define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */ 97 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 98 #define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ 99 #define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ 100 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 101 102 #define CONFIG_CMD_NET 103 #define CONFIG_CMD_PCI 104 105 #define CONFIG_E1000 /* E1000 pci Ethernet card*/ 106 107 /* 108 * PCI Windows 109 * Memory space is mapped 1-1, but I/O space must start from 0. 110 */ 111 /* controller 1, Slot 1, tgtid 1, Base address a000 */ 112 #define CONFIG_SYS_PCIE1_NAME "PCIe Slot" 113 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x90000000 114 #define CONFIG_SYS_PCIE1_MEM_BUS 0x90000000 115 #define CONFIG_SYS_PCIE1_MEM_PHYS 0x90000000 116 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 /* 256M */ 117 #define CONFIG_SYS_PCIE1_IO_VIRT 0xC0010000 118 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 119 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 120 #define CONFIG_SYS_PCIE1_IO_PHYS 0xC0010000 121 122 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 123 124 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 125 #define CONFIG_DOS_PARTITION 126 #endif 127 128 #define CONFIG_FSL_LAW /* Use common FSL init code */ 129 #define CONFIG_ENV_OVERWRITE 130 #define CONFIG_TSEC_ENET /* ethernet */ 131 132 #if defined(CONFIG_SYS_CLK_100_DDR_100) 133 #define CONFIG_SYS_CLK_FREQ 100000000 134 #define CONFIG_DDR_CLK_FREQ 100000000 135 #elif defined(CONFIG_SYS_CLK_100_DDR_133) 136 #define CONFIG_SYS_CLK_FREQ 100000000 137 #define CONFIG_DDR_CLK_FREQ 133000000 138 #endif 139 140 #define CONFIG_MP 141 142 #define CONFIG_HWCONFIG 143 /* 144 * These can be toggled for performance analysis, otherwise use default. 145 */ 146 #define CONFIG_L2_CACHE /* toggle L2 cache */ 147 #define CONFIG_BTB /* enable branch predition */ 148 149 #define CONFIG_SYS_MEMTEST_START 0x01000000 /* memtest works on */ 150 #define CONFIG_SYS_MEMTEST_END 0x01ffffff 151 152 /* DDR Setup */ 153 #define CONFIG_FSL_DDR3 154 #define CONFIG_SYS_SPD_BUS_NUM 0 155 #define SPD_EEPROM_ADDRESS1 0x54 /* I2C access */ 156 #define SPD_EEPROM_ADDRESS2 0x56 /* I2C access */ 157 #define CONFIG_FSL_DDR_INTERACTIVE 158 159 #define CONFIG_MEM_INIT_VALUE 0xDeadBeef 160 161 #define CONFIG_SYS_SDRAM_SIZE (1024) 162 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 163 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 164 165 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 166 167 /* DDR3 Controller Settings */ 168 #define CONFIG_CHIP_SELECTS_PER_CTRL 1 169 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000003F 170 #define CONFIG_SYS_DDR_CS0_CONFIG_1333 0x80004302 171 #define CONFIG_SYS_DDR_CS0_CONFIG_800 0x80014302 172 #define CONFIG_SYS_DDR_CS0_CONFIG_2 0x00000000 173 #define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef 174 #define CONFIG_SYS_DDR_INIT_ADDR 0x00000000 175 #define CONFIG_SYS_DDR_INIT_EXT_ADDR 0x00000000 176 #define CONFIG_SYS_DDR_MODE_CONTROL 0x00000000 177 #define CONFIG_SYS_DDR1_CS0_BNDS 0x0040007F 178 179 #define CONFIG_SYS_DDR_ZQ_CONTROL 0x89080600 180 #define CONFIG_SYS_DDR_SR_CNTR 0x00000000 181 #define CONFIG_SYS_DDR_RCW_1 0x00000000 182 #define CONFIG_SYS_DDR_RCW_2 0x00000000 183 #define CONFIG_SYS_DDR_CONTROL_800 0x470C0000 184 #define CONFIG_SYS_DDR_CONTROL_2_800 0x04401050 185 #define CONFIG_SYS_DDR_TIMING_4_800 0x00220001 186 #define CONFIG_SYS_DDR_TIMING_5_800 0x03402400 187 188 #define CONFIG_SYS_DDR_CONTROL_1333 0x470C0008 189 #define CONFIG_SYS_DDR_CONTROL_2_1333 0x24401010 190 #define CONFIG_SYS_DDR_TIMING_4_1333 0x00000001 191 #define CONFIG_SYS_DDR_TIMING_5_1333 0x03401400 192 193 #define CONFIG_SYS_DDR_TIMING_3_800 0x00020000 194 #define CONFIG_SYS_DDR_TIMING_0_800 0x00330004 195 #define CONFIG_SYS_DDR_TIMING_1_800 0x6f6B4846 196 #define CONFIG_SYS_DDR_TIMING_2_800 0x0FA8C8CF 197 #define CONFIG_SYS_DDR_CLK_CTRL_800 0x03000000 198 #define CONFIG_SYS_DDR_MODE_1_800 0x40461520 199 #define CONFIG_SYS_DDR_MODE_2_800 0x8000c000 200 #define CONFIG_SYS_DDR_INTERVAL_800 0x0C300000 201 #define CONFIG_SYS_DDR_WRLVL_CONTROL_800 0x8655A608 202 203 #define CONFIG_SYS_DDR_TIMING_3_1333 0x01061000 204 #define CONFIG_SYS_DDR_TIMING_0_1333 0x00440104 205 #define CONFIG_SYS_DDR_TIMING_1_1333 0x98913A45 206 #define CONFIG_SYS_DDR_TIMING_2_1333 0x0FB8B114 207 #define CONFIG_SYS_DDR_CLK_CTRL_1333 0x02800000 208 #define CONFIG_SYS_DDR_MODE_1_1333 0x00061A50 209 #define CONFIG_SYS_DDR_MODE_2_1333 0x00100000 210 #define CONFIG_SYS_DDR_INTERVAL_1333 0x144E0513 211 #define CONFIG_SYS_DDR_WRLVL_CONTROL_1333 0x8655F607 212 213 /*FIXME: the following params are constant w.r.t diff freq 214 combinations. this should be removed later 215 */ 216 #if CONFIG_DDR_CLK_FREQ == 100000000 217 #define CONFIG_SYS_DDR_CS0_CONFIG CONFIG_SYS_DDR_CS0_CONFIG_800 218 #define CONFIG_SYS_DDR_CONTROL CONFIG_SYS_DDR_CONTROL_800 219 #define CONFIG_SYS_DDR_CONTROL_2 CONFIG_SYS_DDR_CONTROL_2_800 220 #define CONFIG_SYS_DDR_TIMING_4 CONFIG_SYS_DDR_TIMING_4_800 221 #define CONFIG_SYS_DDR_TIMING_5 CONFIG_SYS_DDR_TIMING_5_800 222 #elif CONFIG_DDR_CLK_FREQ == 133000000 223 #define CONFIG_SYS_DDR_CS0_CONFIG CONFIG_SYS_DDR_CS0_CONFIG_1333 224 #define CONFIG_SYS_DDR_CONTROL CONFIG_SYS_DDR_CONTROL_1333 225 #define CONFIG_SYS_DDR_CONTROL_2 CONFIG_SYS_DDR_CONTROL_2_1333 226 #define CONFIG_SYS_DDR_TIMING_4 CONFIG_SYS_DDR_TIMING_4_1333 227 #define CONFIG_SYS_DDR_TIMING_5 CONFIG_SYS_DDR_TIMING_5_1333 228 #else 229 #define CONFIG_SYS_DDR_CS0_CONFIG CONFIG_SYS_DDR_CS0_CONFIG_800 230 #define CONFIG_SYS_DDR_CONTROL CONFIG_SYS_DDR_CONTROL_800 231 #define CONFIG_SYS_DDR_CONTROL_2 CONFIG_SYS_DDR_CONTROL_2_800 232 #define CONFIG_SYS_DDR_TIMING_4 CONFIG_SYS_DDR_TIMING_4_800 233 #define CONFIG_SYS_DDR_TIMING_5 CONFIG_SYS_DDR_TIMING_5_800 234 #endif 235 236 237 /* relocated CCSRBAR */ 238 #define CONFIG_SYS_CCSRBAR CONFIG_SYS_CCSRBAR_DEFAULT 239 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR_DEFAULT 240 241 #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR 242 243 /* 244 * IFC Definitions 245 */ 246 /* NOR Flash on IFC */ 247 248 #ifdef CONFIG_SPL_BUILD 249 #define CONFIG_SYS_NO_FLASH 250 #endif 251 #define CONFIG_SYS_FLASH_BASE 0x88000000 252 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* Max number of sector: 32M */ 253 254 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 255 256 #define CONFIG_SYS_NOR_CSPR 0x88000101 257 #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) 258 #define CONFIG_SYS_NOR_CSOR CSOR_NOR_ADM_SHIFT(5) 259 /* NOR Flash Timing Params */ 260 261 #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x01) \ 262 | FTIM0_NOR_TEADC(0x03) \ 263 | FTIM0_NOR_TAVDS(0x00) \ 264 | FTIM0_NOR_TEAHC(0x0f)) 265 #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x1d) \ 266 | FTIM1_NOR_TRAD_NOR(0x09) \ 267 | FTIM1_NOR_TSEQRAD_NOR(0x09)) 268 #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x1) \ 269 | FTIM2_NOR_TCH(0x4) \ 270 | FTIM2_NOR_TWPH(0x7) \ 271 | FTIM2_NOR_TWP(0x1e)) 272 #define CONFIG_SYS_NOR_FTIM3 0x0 273 274 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} 275 #define CONFIG_SYS_FLASH_QUIET_TEST 276 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 277 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ 278 279 #undef CONFIG_SYS_FLASH_CHECKSUM 280 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 281 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 282 283 /* CFI for NOR Flash */ 284 #define CONFIG_FLASH_CFI_DRIVER 285 #define CONFIG_SYS_FLASH_CFI 286 #define CONFIG_SYS_FLASH_EMPTY_INFO 287 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 288 289 /* NAND Flash on IFC */ 290 #define CONFIG_SYS_NAND_BASE 0xff800000 291 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE 292 293 #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 294 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ 295 | CSPR_MSEL_NAND /* MSEL = NAND */ \ 296 | CSPR_V) 297 #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) 298 299 #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ 300 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ 301 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ 302 | CSOR_NAND_RAL_2 /* RAL = 2Byes */ \ 303 | CSOR_NAND_PGS_2K /* Page Size = 2K */ \ 304 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \ 305 | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ 306 307 /* NAND Flash Timing Params */ 308 #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x03) \ 309 | FTIM0_NAND_TWP(0x05) \ 310 | FTIM0_NAND_TWCHT(0x02) \ 311 | FTIM0_NAND_TWH(0x04)) 312 #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x1c) \ 313 | FTIM1_NAND_TWBE(0x1e) \ 314 | FTIM1_NAND_TRR(0x07) \ 315 | FTIM1_NAND_TRP(0x05)) 316 #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x08) \ 317 | FTIM2_NAND_TREH(0x04) \ 318 | FTIM2_NAND_TWHRE(0x11)) 319 #define CONFIG_SYS_NAND_FTIM3 FTIM3_NAND_TWW(0x04) 320 321 #define CONFIG_SYS_NAND_DDR_LAW 11 322 323 /* NAND */ 324 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } 325 #define CONFIG_SYS_MAX_NAND_DEVICE 1 326 #define CONFIG_MTD_NAND_VERIFY_WRITE 327 #define CONFIG_CMD_NAND 328 329 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 330 331 #ifndef CONFIG_SPL_BUILD 332 #define CONFIG_FSL_QIXIS 333 #endif 334 #ifdef CONFIG_FSL_QIXIS 335 #define CONFIG_SYS_FPGA_BASE 0xffb00000 336 #define CONFIG_SYS_I2C_FPGA_ADDR 0x66 337 #define QIXIS_BASE CONFIG_SYS_FPGA_BASE 338 #define QIXIS_LBMAP_SWITCH 9 339 #define QIXIS_LBMAP_MASK 0x07 340 #define QIXIS_LBMAP_SHIFT 0 341 #define QIXIS_LBMAP_DFLTBANK 0x00 342 #define QIXIS_LBMAP_ALTBANK 0x04 343 #define QIXIS_RST_CTL_RESET 0x83 344 #define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 345 #define QIXIS_RCFG_CTL_RECONFIG_START 0x21 346 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 347 348 #define CONFIG_SYS_FPGA_BASE_PHYS CONFIG_SYS_FPGA_BASE 349 350 #define CONFIG_SYS_CSPR2 (CSPR_PHYS_ADDR(CONFIG_SYS_FPGA_BASE) \ 351 | CSPR_PORT_SIZE_8 \ 352 | CSPR_MSEL_GPCM \ 353 | CSPR_V) 354 #define CONFIG_SYS_AMASK2 IFC_AMASK(64*1024) 355 #define CONFIG_SYS_CSOR2 0x0 356 /* CPLD Timing parameters for IFC CS3 */ 357 #define CONFIG_SYS_CS2_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ 358 FTIM0_GPCM_TEADC(0x0e) | \ 359 FTIM0_GPCM_TEAHC(0x0e)) 360 #define CONFIG_SYS_CS2_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ 361 FTIM1_GPCM_TRAD(0x1f)) 362 #define CONFIG_SYS_CS2_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ 363 FTIM2_GPCM_TCH(0x0) | \ 364 FTIM2_GPCM_TWP(0x1f)) 365 #define CONFIG_SYS_CS2_FTIM3 0x0 366 #endif 367 368 /* Set up IFC registers for boot location NOR/NAND */ 369 #if defined(CONFIG_NAND) 370 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR 371 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK 372 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR 373 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 374 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 375 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 376 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 377 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR_CSPR 378 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK 379 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR 380 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 381 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 382 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 383 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 384 #else 385 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR_CSPR 386 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK 387 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR 388 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 389 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 390 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 391 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 392 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR 393 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK 394 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR 395 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0 396 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1 397 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2 398 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3 399 #endif 400 401 #define CONFIG_BOARD_EARLY_INIT_F /* Call board_pre_init */ 402 #define CONFIG_BOARD_EARLY_INIT_R 403 404 #define CONFIG_SYS_INIT_RAM_LOCK 405 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */ 406 #define CONFIG_SYS_INIT_RAM_END 0x00004000 /* End of used area in RAM */ 407 408 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END \ 409 - GENERATED_GBL_DATA_SIZE) 410 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 411 412 #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon*/ 413 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc*/ 414 415 /* Serial Port */ 416 #define CONFIG_CONS_INDEX 1 417 #undef CONFIG_SERIAL_SOFTWARE_FIFO 418 #define CONFIG_SYS_NS16550 419 #define CONFIG_SYS_NS16550_SERIAL 420 #define CONFIG_SYS_NS16550_REG_SIZE 1 421 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 422 #ifdef CONFIG_SPL_BUILD 423 #define CONFIG_NS16550_MIN_FUNCTIONS 424 #endif 425 426 #define CONFIG_SERIAL_MULTI 1 /* Enable both serial ports */ 427 #define CONFIG_SYS_CONSOLE_IS_IN_ENV /* determine from environment */ 428 429 #define CONFIG_SYS_BAUDRATE_TABLE \ 430 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 431 432 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR + 0x4500) 433 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR + 0x4600) 434 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR + 0x4700) 435 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR + 0x4800) 436 437 /* Use the HUSH parser */ 438 #define CONFIG_SYS_HUSH_PARSER /* hush parser */ 439 #ifdef CONFIG_SYS_HUSH_PARSER 440 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 441 #endif 442 443 /* 444 * Pass open firmware flat tree 445 */ 446 #define CONFIG_OF_LIBFDT 447 #define CONFIG_OF_BOARD_SETUP 448 #define CONFIG_OF_STDOUT_VIA_ALIAS 449 450 /* new uImage format support */ 451 #define CONFIG_FIT 452 #define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ 453 454 #define CONFIG_FSL_I2C /* Use FSL common I2C driver */ 455 #define CONFIG_HARD_I2C /* I2C with hardware support */ 456 #undef CONFIG_SOFT_I2C /* I2C bit-banged */ 457 #define CONFIG_I2C_MULTI_BUS 458 #define CONFIG_I2C_CMD_TREE 459 #define CONFIG_SYS_I2C_SPEED 400800 /* I2C speed and slave address*/ 460 #define CONFIG_SYS_I2C_SLAVE 0x7F 461 #define CONFIG_SYS_I2C_OFFSET 0x3000 462 #define CONFIG_SYS_I2C2_OFFSET 0x3100 463 464 /* I2C EEPROM */ 465 #define CONFIG_ID_EEPROM 466 #ifdef CONFIG_ID_EEPROM 467 #define CONFIG_SYS_I2C_EEPROM_NXID 468 #endif 469 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 470 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 471 #define CONFIG_SYS_EEPROM_BUS_NUM 0 472 473 /* enable read and write access to EEPROM */ 474 #define CONFIG_CMD_EEPROM 475 #define CONFIG_SYS_I2C_MULTI_EEPROMS 476 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 477 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 478 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 479 480 /* I2C FPGA */ 481 #define CONFIG_I2C_FPGA 482 #define CONFIG_SYS_I2C_FPGA_ADDR 0x66 483 484 #define CONFIG_RTC_DS3231 485 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 486 487 /* 488 * SPI interface will not be available in case of NAND boot SPI CS0 will be 489 * used for SLIC 490 */ 491 /* eSPI - Enhanced SPI */ 492 #define CONFIG_FSL_ESPI /* SPI */ 493 #ifdef CONFIG_FSL_ESPI 494 #define CONFIG_SPI_FLASH 495 #define CONFIG_SPI_FLASH_SPANSION 496 #define CONFIG_CMD_SF 497 #define CONFIG_SF_DEFAULT_SPEED 10000000 498 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 499 #endif 500 501 #if defined(CONFIG_TSEC_ENET) 502 503 #define CONFIG_MII /* MII PHY management */ 504 #define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */ 505 #define CONFIG_TSEC1 1 506 #define CONFIG_TSEC1_NAME "eTSEC1" 507 #define CONFIG_TSEC2 1 508 #define CONFIG_TSEC2_NAME "eTSEC2" 509 510 #define TSEC1_PHY_ADDR 0 511 #define TSEC2_PHY_ADDR 1 512 513 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 514 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 515 516 #define TSEC1_PHYIDX 0 517 #define TSEC2_PHYIDX 0 518 519 #define CONFIG_ETHPRIME "eTSEC1" 520 521 #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ 522 523 /* TBI PHY configuration for SGMII mode */ 524 #define CONFIG_TSEC_TBICR_SETTINGS ( \ 525 TBICR_PHY_RESET \ 526 | TBICR_ANEG_ENABLE \ 527 | TBICR_FULL_DUPLEX \ 528 | TBICR_SPEED1_SET \ 529 ) 530 531 #endif /* CONFIG_TSEC_ENET */ 532 533 #define CONFIG_MMC 534 #ifdef CONFIG_MMC 535 #define CONFIG_CMD_MMC 536 #define CONFIG_DOS_PARTITION 537 #define CONFIG_FSL_ESDHC 538 #define CONFIG_GENERIC_MMC 539 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 540 #endif 541 542 #define CONFIG_USB_EHCI /* USB */ 543 #ifdef CONFIG_USB_EHCI 544 #define CONFIG_CMD_USB 545 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 546 #define CONFIG_USB_EHCI_FSL 547 #define CONFIG_USB_STORAGE 548 #define CONFIG_HAS_FSL_DR_USB 549 #endif 550 551 /* 552 * Environment 553 */ 554 #if defined(CONFIG_RAMBOOT_SDCARD) 555 #define CONFIG_ENV_IS_IN_MMC 556 #define CONFIG_SYS_MMC_ENV_DEV 0 557 #define CONFIG_ENV_SIZE 0x2000 558 #elif defined(CONFIG_RAMBOOT_SPIFLASH) 559 #define CONFIG_ENV_IS_IN_SPI_FLASH 560 #define CONFIG_ENV_SPI_BUS 0 561 #define CONFIG_ENV_SPI_CS 0 562 #define CONFIG_ENV_SPI_MAX_HZ 10000000 563 #define CONFIG_ENV_SPI_MODE 0 564 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 565 #define CONFIG_ENV_SECT_SIZE 0x10000 566 #define CONFIG_ENV_SIZE 0x2000 567 #elif defined(CONFIG_NAND) 568 #define CONFIG_ENV_IS_IN_NAND 569 #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE 570 #define CONFIG_ENV_OFFSET ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE) 571 #define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE) 572 #elif defined(CONFIG_SYS_RAMBOOT) 573 #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ 574 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) 575 #define CONFIG_ENV_SIZE 0x2000 576 #else 577 #define CONFIG_ENV_IS_IN_FLASH 578 #if CONFIG_SYS_MONITOR_BASE > 0xfff80000 579 #define CONFIG_ENV_ADDR 0xfff80000 580 #else 581 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 582 #endif 583 #define CONFIG_ENV_SIZE 0x2000 584 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 585 #endif 586 587 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 588 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 589 590 /* 591 * Command line configuration. 592 */ 593 #include <config_cmd_default.h> 594 595 #define CONFIG_CMD_DATE 596 #define CONFIG_CMD_DHCP 597 #define CONFIG_CMD_ELF 598 #define CONFIG_CMD_ERRATA 599 #define CONFIG_CMD_I2C 600 #define CONFIG_CMD_IRQ 601 #define CONFIG_CMD_MII 602 #define CONFIG_CMD_PING 603 #define CONFIG_CMD_SETEXPR 604 #define CONFIG_CMD_REGINFO 605 606 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) 607 #define CONFIG_CMD_EXT2 608 #define CONFIG_CMD_FAT 609 #define CONFIG_DOS_PARTITION 610 #endif 611 612 /* 613 * Miscellaneous configurable options 614 */ 615 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 616 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 617 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 618 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 619 #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ 620 621 #if defined(CONFIG_CMD_KGDB) 622 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 623 #else 624 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 625 #endif 626 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) 627 /* Print Buffer Size */ 628 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 629 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ 630 #define CONFIG_SYS_HZ 1000 /* decrementer freq:1ms ticks */ 631 632 633 /* 634 * For booting Linux, the board info and command line data 635 * have to be in the first 64 MB of memory, since this is 636 * the maximum mapped by the Linux kernel during initialization. 637 */ 638 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux */ 639 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 640 641 #if defined(CONFIG_CMD_KGDB) 642 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 643 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ 644 #endif 645 646 /* 647 * Environment Configuration 648 */ 649 650 #if defined(CONFIG_TSEC_ENET) 651 #define CONFIG_HAS_ETH0 652 #define CONFIG_HAS_ETH1 653 #endif 654 655 #define CONFIG_HOSTNAME BSC9132qds 656 #define CONFIG_ROOTPATH "/opt/nfsroot" 657 #define CONFIG_BOOTFILE "uImage" 658 #define CONFIG_UBOOTPATH "u-boot.bin" 659 660 #define CONFIG_BAUDRATE 115200 661 662 #ifdef CONFIG_SDCARD 663 #define CONFIG_DEF_HWCONFIG "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0" 664 #else 665 #define CONFIG_DEF_HWCONFIG "hwconfig=sim;usb1:dr_mode=host,phy_type=ulpi\0" 666 #endif 667 668 #define CONFIG_EXTRA_ENV_SETTINGS \ 669 "netdev=eth0\0" \ 670 "uboot=" CONFIG_UBOOTPATH "\0" \ 671 "loadaddr=1000000\0" \ 672 "bootfile=uImage\0" \ 673 "consoledev=ttyS0\0" \ 674 "ramdiskaddr=2000000\0" \ 675 "ramdiskfile=rootfs.ext2.gz.uboot\0" \ 676 "fdtaddr=c00000\0" \ 677 "fdtfile=bsc9132qds.dtb\0" \ 678 "bdev=sda1\0" \ 679 CONFIG_DEF_HWCONFIG\ 680 "othbootargs=mem=880M ramdisk_size=600000 " \ 681 "default_hugepagesz=256m hugepagesz=256m hugepages=1 " \ 682 "isolcpus=0\0" \ 683 "usbext2boot=setenv bootargs root=/dev/ram rw " \ 684 "console=$consoledev,$baudrate $othbootargs; " \ 685 "usb start;" \ 686 "ext2load usb 0:4 $loadaddr $bootfile;" \ 687 "ext2load usb 0:4 $fdtaddr $fdtfile;" \ 688 "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \ 689 "bootm $loadaddr $ramdiskaddr $fdtaddr\0" \ 690 "debug_halt_off=mw ff7e0e30 0xf0000000;" 691 692 #define CONFIG_NFSBOOTCOMMAND \ 693 "setenv bootargs root=/dev/nfs rw " \ 694 "nfsroot=$serverip:$rootpath " \ 695 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 696 "console=$consoledev,$baudrate $othbootargs;" \ 697 "tftp $loadaddr $bootfile;" \ 698 "tftp $fdtaddr $fdtfile;" \ 699 "bootm $loadaddr - $fdtaddr" 700 701 #define CONFIG_HDBOOT \ 702 "setenv bootargs root=/dev/$bdev rw rootdelay=30 " \ 703 "console=$consoledev,$baudrate $othbootargs;" \ 704 "usb start;" \ 705 "ext2load usb 0:1 $loadaddr /boot/$bootfile;" \ 706 "ext2load usb 0:1 $fdtaddr /boot/$fdtfile;" \ 707 "bootm $loadaddr - $fdtaddr" 708 709 #define CONFIG_RAMBOOTCOMMAND \ 710 "setenv bootargs root=/dev/ram rw " \ 711 "console=$consoledev,$baudrate $othbootargs; " \ 712 "tftp $ramdiskaddr $ramdiskfile;" \ 713 "tftp $loadaddr $bootfile;" \ 714 "tftp $fdtaddr $fdtfile;" \ 715 "bootm $loadaddr $ramdiskaddr $fdtaddr" 716 717 #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND 718 719 #endif /* __CONFIG_H */ 720