1 /* 2 * Copyright 2013 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 /* 8 * BSC9132 QDS board configuration file 9 */ 10 11 #ifndef __CONFIG_H 12 #define __CONFIG_H 13 14 #ifdef CONFIG_BSC9132QDS 15 #define CONFIG_BSC9132 16 #endif 17 18 #define CONFIG_MISC_INIT_R 19 20 #ifdef CONFIG_SDCARD 21 #define CONFIG_RAMBOOT_SDCARD 22 #define CONFIG_SYS_RAMBOOT 23 #define CONFIG_SYS_EXTRA_ENV_RELOC 24 #define CONFIG_SYS_TEXT_BASE 0x11000000 25 #define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc 26 #endif 27 #define CONFIG_SYS_FSL_ERRATUM_IFC_A002769 1 28 #ifdef CONFIG_SPIFLASH 29 #define CONFIG_RAMBOOT_SPIFLASH 30 #define CONFIG_SYS_RAMBOOT 31 #define CONFIG_SYS_EXTRA_ENV_RELOC 32 #define CONFIG_SYS_TEXT_BASE 0x11000000 33 #define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc 34 #endif 35 #ifdef CONFIG_NAND_SECBOOT 36 #define CONFIG_RAMBOOT_NAND 37 #define CONFIG_SYS_RAMBOOT 38 #define CONFIG_SYS_EXTRA_ENV_RELOC 39 #define CONFIG_SYS_TEXT_BASE 0x11000000 40 #define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc 41 #endif 42 43 #ifdef CONFIG_NAND 44 #define CONFIG_SPL_INIT_MINIMAL 45 #define CONFIG_SPL_SERIAL_SUPPORT 46 #define CONFIG_SPL_NAND_SUPPORT 47 #define CONFIG_SPL_NAND_BOOT 48 #define CONFIG_SPL_FLUSH_IMAGE 49 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 50 51 #define CONFIG_SYS_TEXT_BASE 0x00201000 52 #define CONFIG_SPL_TEXT_BASE 0xFFFFE000 53 #define CONFIG_SPL_MAX_SIZE 8192 54 #define CONFIG_SPL_RELOC_TEXT_BASE 0x00100000 55 #define CONFIG_SPL_RELOC_STACK 0x00100000 56 #define CONFIG_SYS_NAND_U_BOOT_SIZE ((768 << 10) - 0x2000) 57 #define CONFIG_SYS_NAND_U_BOOT_DST (0x00200000 - CONFIG_SPL_MAX_SIZE) 58 #define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 59 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0 60 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" 61 #endif 62 63 #ifndef CONFIG_SYS_TEXT_BASE 64 #define CONFIG_SYS_TEXT_BASE 0x8ff40000 65 #endif 66 67 #ifndef CONFIG_RESET_VECTOR_ADDRESS 68 #define CONFIG_RESET_VECTOR_ADDRESS 0x8ffffffc 69 #endif 70 71 #ifdef CONFIG_SPL_BUILD 72 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE 73 #else 74 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 75 #endif 76 77 /* High Level Configuration Options */ 78 #define CONFIG_BOOKE /* BOOKE */ 79 #define CONFIG_E500 /* BOOKE e500 family */ 80 #define CONFIG_FSL_IFC /* Enable IFC Support */ 81 #define CONFIG_FSL_CAAM /* Enable SEC/CAAM */ 82 #define CONFIG_SYS_HAS_SERDES /* common SERDES init code */ 83 84 #define CONFIG_PCI /* Enable PCI/PCIE */ 85 #if defined(CONFIG_PCI) 86 #define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */ 87 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 88 #define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ 89 #define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ 90 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 91 92 #define CONFIG_CMD_NET 93 #define CONFIG_CMD_PCI 94 95 #define CONFIG_E1000 /* E1000 pci Ethernet card*/ 96 97 /* 98 * PCI Windows 99 * Memory space is mapped 1-1, but I/O space must start from 0. 100 */ 101 /* controller 1, Slot 1, tgtid 1, Base address a000 */ 102 #define CONFIG_SYS_PCIE1_NAME "PCIe Slot" 103 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x90000000 104 #define CONFIG_SYS_PCIE1_MEM_BUS 0x90000000 105 #define CONFIG_SYS_PCIE1_MEM_PHYS 0x90000000 106 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 /* 256M */ 107 #define CONFIG_SYS_PCIE1_IO_VIRT 0xC0010000 108 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 109 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 110 #define CONFIG_SYS_PCIE1_IO_PHYS 0xC0010000 111 112 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 113 114 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 115 #define CONFIG_DOS_PARTITION 116 #endif 117 118 #define CONFIG_FSL_LAW /* Use common FSL init code */ 119 #define CONFIG_ENV_OVERWRITE 120 #define CONFIG_TSEC_ENET /* ethernet */ 121 122 #if defined(CONFIG_SYS_CLK_100_DDR_100) 123 #define CONFIG_SYS_CLK_FREQ 100000000 124 #define CONFIG_DDR_CLK_FREQ 100000000 125 #elif defined(CONFIG_SYS_CLK_100_DDR_133) 126 #define CONFIG_SYS_CLK_FREQ 100000000 127 #define CONFIG_DDR_CLK_FREQ 133000000 128 #endif 129 130 #define CONFIG_MP 131 132 #define CONFIG_HWCONFIG 133 /* 134 * These can be toggled for performance analysis, otherwise use default. 135 */ 136 #define CONFIG_L2_CACHE /* toggle L2 cache */ 137 #define CONFIG_BTB /* enable branch predition */ 138 139 #define CONFIG_SYS_MEMTEST_START 0x01000000 /* memtest works on */ 140 #define CONFIG_SYS_MEMTEST_END 0x01ffffff 141 142 /* DDR Setup */ 143 #define CONFIG_SYS_FSL_DDR3 144 #define CONFIG_SYS_SPD_BUS_NUM 0 145 #define SPD_EEPROM_ADDRESS1 0x54 /* I2C access */ 146 #define SPD_EEPROM_ADDRESS2 0x56 /* I2C access */ 147 #define CONFIG_FSL_DDR_INTERACTIVE 148 149 #define CONFIG_MEM_INIT_VALUE 0xDeadBeef 150 151 #define CONFIG_SYS_SDRAM_SIZE (1024) 152 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 153 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 154 155 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 156 157 /* DDR3 Controller Settings */ 158 #define CONFIG_CHIP_SELECTS_PER_CTRL 1 159 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000003F 160 #define CONFIG_SYS_DDR_CS0_CONFIG_1333 0x80004302 161 #define CONFIG_SYS_DDR_CS0_CONFIG_800 0x80014302 162 #define CONFIG_SYS_DDR_CS0_CONFIG_2 0x00000000 163 #define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef 164 #define CONFIG_SYS_DDR_INIT_ADDR 0x00000000 165 #define CONFIG_SYS_DDR_INIT_EXT_ADDR 0x00000000 166 #define CONFIG_SYS_DDR_MODE_CONTROL 0x00000000 167 #define CONFIG_SYS_DDR1_CS0_BNDS 0x0040007F 168 169 #define CONFIG_SYS_DDR_ZQ_CONTROL 0x89080600 170 #define CONFIG_SYS_DDR_SR_CNTR 0x00000000 171 #define CONFIG_SYS_DDR_RCW_1 0x00000000 172 #define CONFIG_SYS_DDR_RCW_2 0x00000000 173 #define CONFIG_SYS_DDR_CONTROL_800 0x470C0000 174 #define CONFIG_SYS_DDR_CONTROL_2_800 0x04401050 175 #define CONFIG_SYS_DDR_TIMING_4_800 0x00220001 176 #define CONFIG_SYS_DDR_TIMING_5_800 0x03402400 177 178 #define CONFIG_SYS_DDR_CONTROL_1333 0x470C0008 179 #define CONFIG_SYS_DDR_CONTROL_2_1333 0x24401010 180 #define CONFIG_SYS_DDR_TIMING_4_1333 0x00000001 181 #define CONFIG_SYS_DDR_TIMING_5_1333 0x03401400 182 183 #define CONFIG_SYS_DDR_TIMING_3_800 0x00020000 184 #define CONFIG_SYS_DDR_TIMING_0_800 0x00330004 185 #define CONFIG_SYS_DDR_TIMING_1_800 0x6f6B4846 186 #define CONFIG_SYS_DDR_TIMING_2_800 0x0FA8C8CF 187 #define CONFIG_SYS_DDR_CLK_CTRL_800 0x03000000 188 #define CONFIG_SYS_DDR_MODE_1_800 0x40461520 189 #define CONFIG_SYS_DDR_MODE_2_800 0x8000c000 190 #define CONFIG_SYS_DDR_INTERVAL_800 0x0C300000 191 #define CONFIG_SYS_DDR_WRLVL_CONTROL_800 0x8655A608 192 193 #define CONFIG_SYS_DDR_TIMING_3_1333 0x01061000 194 #define CONFIG_SYS_DDR_TIMING_0_1333 0x00440104 195 #define CONFIG_SYS_DDR_TIMING_1_1333 0x98913A45 196 #define CONFIG_SYS_DDR_TIMING_2_1333 0x0FB8B114 197 #define CONFIG_SYS_DDR_CLK_CTRL_1333 0x02800000 198 #define CONFIG_SYS_DDR_MODE_1_1333 0x00061A50 199 #define CONFIG_SYS_DDR_MODE_2_1333 0x00100000 200 #define CONFIG_SYS_DDR_INTERVAL_1333 0x144E0513 201 #define CONFIG_SYS_DDR_WRLVL_CONTROL_1333 0x8655F607 202 203 /*FIXME: the following params are constant w.r.t diff freq 204 combinations. this should be removed later 205 */ 206 #if CONFIG_DDR_CLK_FREQ == 100000000 207 #define CONFIG_SYS_DDR_CS0_CONFIG CONFIG_SYS_DDR_CS0_CONFIG_800 208 #define CONFIG_SYS_DDR_CONTROL CONFIG_SYS_DDR_CONTROL_800 209 #define CONFIG_SYS_DDR_CONTROL_2 CONFIG_SYS_DDR_CONTROL_2_800 210 #define CONFIG_SYS_DDR_TIMING_4 CONFIG_SYS_DDR_TIMING_4_800 211 #define CONFIG_SYS_DDR_TIMING_5 CONFIG_SYS_DDR_TIMING_5_800 212 #elif CONFIG_DDR_CLK_FREQ == 133000000 213 #define CONFIG_SYS_DDR_CS0_CONFIG CONFIG_SYS_DDR_CS0_CONFIG_1333 214 #define CONFIG_SYS_DDR_CONTROL CONFIG_SYS_DDR_CONTROL_1333 215 #define CONFIG_SYS_DDR_CONTROL_2 CONFIG_SYS_DDR_CONTROL_2_1333 216 #define CONFIG_SYS_DDR_TIMING_4 CONFIG_SYS_DDR_TIMING_4_1333 217 #define CONFIG_SYS_DDR_TIMING_5 CONFIG_SYS_DDR_TIMING_5_1333 218 #else 219 #define CONFIG_SYS_DDR_CS0_CONFIG CONFIG_SYS_DDR_CS0_CONFIG_800 220 #define CONFIG_SYS_DDR_CONTROL CONFIG_SYS_DDR_CONTROL_800 221 #define CONFIG_SYS_DDR_CONTROL_2 CONFIG_SYS_DDR_CONTROL_2_800 222 #define CONFIG_SYS_DDR_TIMING_4 CONFIG_SYS_DDR_TIMING_4_800 223 #define CONFIG_SYS_DDR_TIMING_5 CONFIG_SYS_DDR_TIMING_5_800 224 #endif 225 226 227 /* relocated CCSRBAR */ 228 #define CONFIG_SYS_CCSRBAR CONFIG_SYS_CCSRBAR_DEFAULT 229 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR_DEFAULT 230 231 #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR 232 233 /* DSP CCSRBAR */ 234 #define CONFIG_SYS_FSL_DSP_CCSRBAR CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT 235 #define CONFIG_SYS_FSL_DSP_CCSRBAR_PHYS CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT 236 237 /* 238 * IFC Definitions 239 */ 240 /* NOR Flash on IFC */ 241 242 #ifdef CONFIG_SPL_BUILD 243 #define CONFIG_SYS_NO_FLASH 244 #endif 245 #define CONFIG_SYS_FLASH_BASE 0x88000000 246 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* Max number of sector: 32M */ 247 248 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 249 250 #define CONFIG_SYS_NOR_CSPR 0x88000101 251 #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) 252 #define CONFIG_SYS_NOR_CSOR CSOR_NOR_ADM_SHIFT(5) 253 /* NOR Flash Timing Params */ 254 255 #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x01) \ 256 | FTIM0_NOR_TEADC(0x03) \ 257 | FTIM0_NOR_TAVDS(0x00) \ 258 | FTIM0_NOR_TEAHC(0x0f)) 259 #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x1d) \ 260 | FTIM1_NOR_TRAD_NOR(0x09) \ 261 | FTIM1_NOR_TSEQRAD_NOR(0x09)) 262 #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x1) \ 263 | FTIM2_NOR_TCH(0x4) \ 264 | FTIM2_NOR_TWPH(0x7) \ 265 | FTIM2_NOR_TWP(0x1e)) 266 #define CONFIG_SYS_NOR_FTIM3 0x0 267 268 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} 269 #define CONFIG_SYS_FLASH_QUIET_TEST 270 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 271 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ 272 273 #undef CONFIG_SYS_FLASH_CHECKSUM 274 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 275 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 276 277 /* CFI for NOR Flash */ 278 #define CONFIG_FLASH_CFI_DRIVER 279 #define CONFIG_SYS_FLASH_CFI 280 #define CONFIG_SYS_FLASH_EMPTY_INFO 281 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 282 283 /* NAND Flash on IFC */ 284 #define CONFIG_SYS_NAND_BASE 0xff800000 285 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE 286 287 #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 288 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ 289 | CSPR_MSEL_NAND /* MSEL = NAND */ \ 290 | CSPR_V) 291 #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) 292 293 #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ 294 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ 295 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ 296 | CSOR_NAND_RAL_2 /* RAL = 2Byes */ \ 297 | CSOR_NAND_PGS_2K /* Page Size = 2K */ \ 298 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \ 299 | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ 300 301 /* NAND Flash Timing Params */ 302 #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x03) \ 303 | FTIM0_NAND_TWP(0x05) \ 304 | FTIM0_NAND_TWCHT(0x02) \ 305 | FTIM0_NAND_TWH(0x04)) 306 #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x1c) \ 307 | FTIM1_NAND_TWBE(0x1e) \ 308 | FTIM1_NAND_TRR(0x07) \ 309 | FTIM1_NAND_TRP(0x05)) 310 #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x08) \ 311 | FTIM2_NAND_TREH(0x04) \ 312 | FTIM2_NAND_TWHRE(0x11)) 313 #define CONFIG_SYS_NAND_FTIM3 FTIM3_NAND_TWW(0x04) 314 315 #define CONFIG_SYS_NAND_DDR_LAW 11 316 317 /* NAND */ 318 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } 319 #define CONFIG_SYS_MAX_NAND_DEVICE 1 320 #define CONFIG_MTD_NAND_VERIFY_WRITE 321 #define CONFIG_CMD_NAND 322 323 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 324 325 #ifndef CONFIG_SPL_BUILD 326 #define CONFIG_FSL_QIXIS 327 #endif 328 #ifdef CONFIG_FSL_QIXIS 329 #define CONFIG_SYS_FPGA_BASE 0xffb00000 330 #define CONFIG_SYS_I2C_FPGA_ADDR 0x66 331 #define QIXIS_BASE CONFIG_SYS_FPGA_BASE 332 #define QIXIS_LBMAP_SWITCH 9 333 #define QIXIS_LBMAP_MASK 0x07 334 #define QIXIS_LBMAP_SHIFT 0 335 #define QIXIS_LBMAP_DFLTBANK 0x00 336 #define QIXIS_LBMAP_ALTBANK 0x04 337 #define QIXIS_RST_CTL_RESET 0x83 338 #define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 339 #define QIXIS_RCFG_CTL_RECONFIG_START 0x21 340 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 341 342 #define CONFIG_SYS_FPGA_BASE_PHYS CONFIG_SYS_FPGA_BASE 343 344 #define CONFIG_SYS_CSPR2 (CSPR_PHYS_ADDR(CONFIG_SYS_FPGA_BASE) \ 345 | CSPR_PORT_SIZE_8 \ 346 | CSPR_MSEL_GPCM \ 347 | CSPR_V) 348 #define CONFIG_SYS_AMASK2 IFC_AMASK(64*1024) 349 #define CONFIG_SYS_CSOR2 0x0 350 /* CPLD Timing parameters for IFC CS3 */ 351 #define CONFIG_SYS_CS2_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ 352 FTIM0_GPCM_TEADC(0x0e) | \ 353 FTIM0_GPCM_TEAHC(0x0e)) 354 #define CONFIG_SYS_CS2_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ 355 FTIM1_GPCM_TRAD(0x1f)) 356 #define CONFIG_SYS_CS2_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ 357 FTIM2_GPCM_TCH(0x8) | \ 358 FTIM2_GPCM_TWP(0x1f)) 359 #define CONFIG_SYS_CS2_FTIM3 0x0 360 #endif 361 362 /* Set up IFC registers for boot location NOR/NAND */ 363 #if defined(CONFIG_NAND) || defined(CONFIG_NAND_SECBOOT) 364 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR 365 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK 366 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR 367 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 368 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 369 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 370 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 371 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR_CSPR 372 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK 373 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR 374 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 375 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 376 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 377 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 378 #else 379 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR_CSPR 380 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK 381 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR 382 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 383 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 384 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 385 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 386 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR 387 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK 388 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR 389 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0 390 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1 391 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2 392 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3 393 #endif 394 395 #define CONFIG_BOARD_EARLY_INIT_F /* Call board_pre_init */ 396 #define CONFIG_BOARD_EARLY_INIT_R 397 398 #define CONFIG_SYS_INIT_RAM_LOCK 399 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */ 400 #define CONFIG_SYS_INIT_RAM_END 0x00004000 /* End of used area in RAM */ 401 402 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END \ 403 - GENERATED_GBL_DATA_SIZE) 404 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 405 406 #define CONFIG_SYS_MONITOR_LEN (768 * 1024) 407 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc*/ 408 409 /* Serial Port */ 410 #define CONFIG_CONS_INDEX 1 411 #undef CONFIG_SERIAL_SOFTWARE_FIFO 412 #define CONFIG_SYS_NS16550 413 #define CONFIG_SYS_NS16550_SERIAL 414 #define CONFIG_SYS_NS16550_REG_SIZE 1 415 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 416 #ifdef CONFIG_SPL_BUILD 417 #define CONFIG_NS16550_MIN_FUNCTIONS 418 #endif 419 420 #define CONFIG_SERIAL_MULTI 1 /* Enable both serial ports */ 421 #define CONFIG_SYS_CONSOLE_IS_IN_ENV /* determine from environment */ 422 423 #define CONFIG_SYS_BAUDRATE_TABLE \ 424 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 425 426 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR + 0x4500) 427 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR + 0x4600) 428 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR + 0x4700) 429 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR + 0x4800) 430 431 /* Use the HUSH parser */ 432 #define CONFIG_SYS_HUSH_PARSER /* hush parser */ 433 #ifdef CONFIG_SYS_HUSH_PARSER 434 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 435 #endif 436 437 /* 438 * Pass open firmware flat tree 439 */ 440 #define CONFIG_OF_LIBFDT 441 #define CONFIG_OF_BOARD_SETUP 442 #define CONFIG_OF_STDOUT_VIA_ALIAS 443 444 /* new uImage format support */ 445 #define CONFIG_FIT 446 #define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ 447 448 #define CONFIG_SYS_I2C 449 #define CONFIG_SYS_I2C_FSL 450 #define CONFIG_SYS_FSL_I2C_SPEED 400800 /* I2C speed and slave address*/ 451 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 452 #define CONFIG_SYS_FSL_I2C2_SPEED 400800 /* I2C speed and slave address*/ 453 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 454 #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 455 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 456 457 /* I2C EEPROM */ 458 #define CONFIG_ID_EEPROM 459 #ifdef CONFIG_ID_EEPROM 460 #define CONFIG_SYS_I2C_EEPROM_NXID 461 #endif 462 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 463 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 464 #define CONFIG_SYS_EEPROM_BUS_NUM 0 465 466 /* enable read and write access to EEPROM */ 467 #define CONFIG_CMD_EEPROM 468 #define CONFIG_SYS_I2C_MULTI_EEPROMS 469 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 470 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 471 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 472 473 /* I2C FPGA */ 474 #define CONFIG_I2C_FPGA 475 #define CONFIG_SYS_I2C_FPGA_ADDR 0x66 476 477 #define CONFIG_RTC_DS3231 478 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 479 480 /* 481 * SPI interface will not be available in case of NAND boot SPI CS0 will be 482 * used for SLIC 483 */ 484 /* eSPI - Enhanced SPI */ 485 #define CONFIG_FSL_ESPI /* SPI */ 486 #ifdef CONFIG_FSL_ESPI 487 #define CONFIG_SPI_FLASH 488 #define CONFIG_SPI_FLASH_SPANSION 489 #define CONFIG_CMD_SF 490 #define CONFIG_SF_DEFAULT_SPEED 10000000 491 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 492 #endif 493 494 #if defined(CONFIG_TSEC_ENET) 495 496 #define CONFIG_MII /* MII PHY management */ 497 #define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */ 498 #define CONFIG_TSEC1 1 499 #define CONFIG_TSEC1_NAME "eTSEC1" 500 #define CONFIG_TSEC2 1 501 #define CONFIG_TSEC2_NAME "eTSEC2" 502 503 #define TSEC1_PHY_ADDR 0 504 #define TSEC2_PHY_ADDR 1 505 506 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 507 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 508 509 #define TSEC1_PHYIDX 0 510 #define TSEC2_PHYIDX 0 511 512 #define CONFIG_ETHPRIME "eTSEC1" 513 514 #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ 515 516 /* TBI PHY configuration for SGMII mode */ 517 #define CONFIG_TSEC_TBICR_SETTINGS ( \ 518 TBICR_PHY_RESET \ 519 | TBICR_ANEG_ENABLE \ 520 | TBICR_FULL_DUPLEX \ 521 | TBICR_SPEED1_SET \ 522 ) 523 524 #endif /* CONFIG_TSEC_ENET */ 525 526 #define CONFIG_MMC 527 #ifdef CONFIG_MMC 528 #define CONFIG_CMD_MMC 529 #define CONFIG_DOS_PARTITION 530 #define CONFIG_FSL_ESDHC 531 #define CONFIG_GENERIC_MMC 532 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 533 #endif 534 535 #define CONFIG_USB_EHCI /* USB */ 536 #ifdef CONFIG_USB_EHCI 537 #define CONFIG_CMD_USB 538 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 539 #define CONFIG_USB_EHCI_FSL 540 #define CONFIG_USB_STORAGE 541 #define CONFIG_HAS_FSL_DR_USB 542 #endif 543 544 /* 545 * Environment 546 */ 547 #if defined(CONFIG_RAMBOOT_SDCARD) 548 #define CONFIG_ENV_IS_IN_MMC 549 #define CONFIG_FSL_FIXED_MMC_LOCATION 550 #define CONFIG_SYS_MMC_ENV_DEV 0 551 #define CONFIG_ENV_SIZE 0x2000 552 #elif defined(CONFIG_RAMBOOT_SPIFLASH) 553 #define CONFIG_ENV_IS_IN_SPI_FLASH 554 #define CONFIG_ENV_SPI_BUS 0 555 #define CONFIG_ENV_SPI_CS 0 556 #define CONFIG_ENV_SPI_MAX_HZ 10000000 557 #define CONFIG_ENV_SPI_MODE 0 558 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 559 #define CONFIG_ENV_SECT_SIZE 0x10000 560 #define CONFIG_ENV_SIZE 0x2000 561 #elif defined(CONFIG_NAND) || defined(CONFIG_NAND_SECBOOT) 562 #define CONFIG_ENV_IS_IN_NAND 563 #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE 564 #define CONFIG_ENV_OFFSET ((768 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE) 565 #define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE) 566 #elif defined(CONFIG_SYS_RAMBOOT) 567 #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ 568 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) 569 #define CONFIG_ENV_SIZE 0x2000 570 #else 571 #define CONFIG_ENV_IS_IN_FLASH 572 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 573 #define CONFIG_ENV_SIZE 0x2000 574 #define CONFIG_ENV_SECT_SIZE 0x20000 575 #endif 576 577 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 578 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 579 580 /* 581 * Command line configuration. 582 */ 583 #include <config_cmd_default.h> 584 585 #define CONFIG_CMD_DATE 586 #define CONFIG_CMD_DHCP 587 #define CONFIG_CMD_ELF 588 #define CONFIG_CMD_ERRATA 589 #define CONFIG_CMD_I2C 590 #define CONFIG_CMD_IRQ 591 #define CONFIG_CMD_MII 592 #define CONFIG_CMD_PING 593 #define CONFIG_CMD_SETEXPR 594 #define CONFIG_CMD_REGINFO 595 596 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) 597 #define CONFIG_CMD_EXT2 598 #define CONFIG_CMD_FAT 599 #define CONFIG_DOS_PARTITION 600 #endif 601 602 /* Hash command with SHA acceleration supported in hardware */ 603 #ifdef CONFIG_FSL_CAAM 604 #define CONFIG_CMD_HASH 605 #define CONFIG_SHA_HW_ACCEL 606 #endif 607 608 /* 609 * Miscellaneous configurable options 610 */ 611 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 612 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 613 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 614 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 615 616 #if defined(CONFIG_CMD_KGDB) 617 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 618 #else 619 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 620 #endif 621 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) 622 /* Print Buffer Size */ 623 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 624 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ 625 626 627 /* 628 * For booting Linux, the board info and command line data 629 * have to be in the first 64 MB of memory, since this is 630 * the maximum mapped by the Linux kernel during initialization. 631 */ 632 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux */ 633 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 634 635 #if defined(CONFIG_CMD_KGDB) 636 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 637 #endif 638 639 /* 640 * Environment Configuration 641 */ 642 643 #if defined(CONFIG_TSEC_ENET) 644 #define CONFIG_HAS_ETH0 645 #define CONFIG_HAS_ETH1 646 #endif 647 648 #define CONFIG_HOSTNAME BSC9132qds 649 #define CONFIG_ROOTPATH "/opt/nfsroot" 650 #define CONFIG_BOOTFILE "uImage" 651 #define CONFIG_UBOOTPATH "u-boot.bin" 652 653 #define CONFIG_BAUDRATE 115200 654 655 #ifdef CONFIG_SDCARD 656 #define CONFIG_DEF_HWCONFIG "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0" 657 #else 658 #define CONFIG_DEF_HWCONFIG "hwconfig=sim;usb1:dr_mode=host,phy_type=ulpi\0" 659 #endif 660 661 #define CONFIG_EXTRA_ENV_SETTINGS \ 662 "netdev=eth0\0" \ 663 "uboot=" CONFIG_UBOOTPATH "\0" \ 664 "loadaddr=1000000\0" \ 665 "bootfile=uImage\0" \ 666 "consoledev=ttyS0\0" \ 667 "ramdiskaddr=2000000\0" \ 668 "ramdiskfile=rootfs.ext2.gz.uboot\0" \ 669 "fdtaddr=c00000\0" \ 670 "fdtfile=bsc9132qds.dtb\0" \ 671 "bdev=sda1\0" \ 672 CONFIG_DEF_HWCONFIG\ 673 "othbootargs=mem=880M ramdisk_size=600000 " \ 674 "default_hugepagesz=256m hugepagesz=256m hugepages=1 " \ 675 "isolcpus=0\0" \ 676 "usbext2boot=setenv bootargs root=/dev/ram rw " \ 677 "console=$consoledev,$baudrate $othbootargs; " \ 678 "usb start;" \ 679 "ext2load usb 0:4 $loadaddr $bootfile;" \ 680 "ext2load usb 0:4 $fdtaddr $fdtfile;" \ 681 "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \ 682 "bootm $loadaddr $ramdiskaddr $fdtaddr\0" \ 683 "debug_halt_off=mw ff7e0e30 0xf0000000;" 684 685 #define CONFIG_NFSBOOTCOMMAND \ 686 "setenv bootargs root=/dev/nfs rw " \ 687 "nfsroot=$serverip:$rootpath " \ 688 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 689 "console=$consoledev,$baudrate $othbootargs;" \ 690 "tftp $loadaddr $bootfile;" \ 691 "tftp $fdtaddr $fdtfile;" \ 692 "bootm $loadaddr - $fdtaddr" 693 694 #define CONFIG_HDBOOT \ 695 "setenv bootargs root=/dev/$bdev rw rootdelay=30 " \ 696 "console=$consoledev,$baudrate $othbootargs;" \ 697 "usb start;" \ 698 "ext2load usb 0:1 $loadaddr /boot/$bootfile;" \ 699 "ext2load usb 0:1 $fdtaddr /boot/$fdtfile;" \ 700 "bootm $loadaddr - $fdtaddr" 701 702 #define CONFIG_RAMBOOTCOMMAND \ 703 "setenv bootargs root=/dev/ram rw " \ 704 "console=$consoledev,$baudrate $othbootargs; " \ 705 "tftp $ramdiskaddr $ramdiskfile;" \ 706 "tftp $loadaddr $bootfile;" \ 707 "tftp $fdtaddr $fdtfile;" \ 708 "bootm $loadaddr $ramdiskaddr $fdtaddr" 709 710 #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND 711 712 #include <asm/fsl_secure_boot.h> 713 714 #ifdef CONFIG_SECURE_BOOT 715 #define CONFIG_CMD_BLOB 716 #endif 717 718 #endif /* __CONFIG_H */ 719