1 /* 2 * Copyright 2013 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 /* 8 * BSC9132 QDS board configuration file 9 */ 10 11 #ifndef __CONFIG_H 12 #define __CONFIG_H 13 14 #ifdef CONFIG_BSC9132QDS 15 #define CONFIG_BSC9132 16 #endif 17 18 #define CONFIG_MISC_INIT_R 19 20 #ifdef CONFIG_SDCARD 21 #define CONFIG_RAMBOOT_SDCARD 22 #define CONFIG_SYS_RAMBOOT 23 #define CONFIG_SYS_EXTRA_ENV_RELOC 24 #define CONFIG_SYS_TEXT_BASE 0x11000000 25 #define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc 26 #endif 27 #define CONFIG_SYS_FSL_ERRATUM_IFC_A002769 1 28 #ifdef CONFIG_SPIFLASH 29 #define CONFIG_RAMBOOT_SPIFLASH 30 #define CONFIG_SYS_RAMBOOT 31 #define CONFIG_SYS_EXTRA_ENV_RELOC 32 #define CONFIG_SYS_TEXT_BASE 0x11000000 33 #define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc 34 #endif 35 36 #ifdef CONFIG_NAND 37 #define CONFIG_SPL 38 #define CONFIG_SPL_INIT_MINIMAL 39 #define CONFIG_SPL_SERIAL_SUPPORT 40 #define CONFIG_SPL_NAND_SUPPORT 41 #define CONFIG_SPL_NAND_MINIMAL 42 #define CONFIG_SPL_FLUSH_IMAGE 43 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 44 45 #define CONFIG_SYS_TEXT_BASE 0x00201000 46 #define CONFIG_SPL_TEXT_BASE 0xFFFFE000 47 #define CONFIG_SPL_MAX_SIZE 8192 48 #define CONFIG_SPL_RELOC_TEXT_BASE 0x00100000 49 #define CONFIG_SPL_RELOC_STACK 0x00100000 50 #define CONFIG_SYS_NAND_U_BOOT_SIZE ((512 << 10) - 0x2000) 51 #define CONFIG_SYS_NAND_U_BOOT_DST (0x00200000 - CONFIG_SPL_MAX_SIZE) 52 #define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 53 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0 54 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" 55 #endif 56 57 #ifndef CONFIG_SYS_TEXT_BASE 58 #define CONFIG_SYS_TEXT_BASE 0x8ff80000 59 #endif 60 61 #ifndef CONFIG_RESET_VECTOR_ADDRESS 62 #define CONFIG_RESET_VECTOR_ADDRESS 0x8ffffffc 63 #endif 64 65 #ifdef CONFIG_SPL_BUILD 66 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE 67 #else 68 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 69 #endif 70 71 /* High Level Configuration Options */ 72 #define CONFIG_BOOKE /* BOOKE */ 73 #define CONFIG_E500 /* BOOKE e500 family */ 74 #define CONFIG_MPC85xx 75 #define CONFIG_FSL_IFC /* Enable IFC Support */ 76 #define CONFIG_SYS_HAS_SERDES /* common SERDES init code */ 77 78 #define CONFIG_PCI /* Enable PCI/PCIE */ 79 #if defined(CONFIG_PCI) 80 #define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */ 81 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 82 #define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ 83 #define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ 84 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 85 86 #define CONFIG_CMD_NET 87 #define CONFIG_CMD_PCI 88 89 #define CONFIG_E1000 /* E1000 pci Ethernet card*/ 90 91 /* 92 * PCI Windows 93 * Memory space is mapped 1-1, but I/O space must start from 0. 94 */ 95 /* controller 1, Slot 1, tgtid 1, Base address a000 */ 96 #define CONFIG_SYS_PCIE1_NAME "PCIe Slot" 97 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x90000000 98 #define CONFIG_SYS_PCIE1_MEM_BUS 0x90000000 99 #define CONFIG_SYS_PCIE1_MEM_PHYS 0x90000000 100 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 /* 256M */ 101 #define CONFIG_SYS_PCIE1_IO_VIRT 0xC0010000 102 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 103 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 104 #define CONFIG_SYS_PCIE1_IO_PHYS 0xC0010000 105 106 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 107 108 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 109 #define CONFIG_DOS_PARTITION 110 #endif 111 112 #define CONFIG_FSL_LAW /* Use common FSL init code */ 113 #define CONFIG_ENV_OVERWRITE 114 #define CONFIG_TSEC_ENET /* ethernet */ 115 116 #if defined(CONFIG_SYS_CLK_100_DDR_100) 117 #define CONFIG_SYS_CLK_FREQ 100000000 118 #define CONFIG_DDR_CLK_FREQ 100000000 119 #elif defined(CONFIG_SYS_CLK_100_DDR_133) 120 #define CONFIG_SYS_CLK_FREQ 100000000 121 #define CONFIG_DDR_CLK_FREQ 133000000 122 #endif 123 124 #define CONFIG_MP 125 126 #define CONFIG_HWCONFIG 127 /* 128 * These can be toggled for performance analysis, otherwise use default. 129 */ 130 #define CONFIG_L2_CACHE /* toggle L2 cache */ 131 #define CONFIG_BTB /* enable branch predition */ 132 133 #define CONFIG_SYS_MEMTEST_START 0x01000000 /* memtest works on */ 134 #define CONFIG_SYS_MEMTEST_END 0x01ffffff 135 136 /* DDR Setup */ 137 #define CONFIG_SYS_FSL_DDR3 138 #define CONFIG_SYS_SPD_BUS_NUM 0 139 #define SPD_EEPROM_ADDRESS1 0x54 /* I2C access */ 140 #define SPD_EEPROM_ADDRESS2 0x56 /* I2C access */ 141 #define CONFIG_FSL_DDR_INTERACTIVE 142 143 #define CONFIG_MEM_INIT_VALUE 0xDeadBeef 144 145 #define CONFIG_SYS_SDRAM_SIZE (1024) 146 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 147 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 148 149 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 150 151 /* DDR3 Controller Settings */ 152 #define CONFIG_CHIP_SELECTS_PER_CTRL 1 153 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000003F 154 #define CONFIG_SYS_DDR_CS0_CONFIG_1333 0x80004302 155 #define CONFIG_SYS_DDR_CS0_CONFIG_800 0x80014302 156 #define CONFIG_SYS_DDR_CS0_CONFIG_2 0x00000000 157 #define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef 158 #define CONFIG_SYS_DDR_INIT_ADDR 0x00000000 159 #define CONFIG_SYS_DDR_INIT_EXT_ADDR 0x00000000 160 #define CONFIG_SYS_DDR_MODE_CONTROL 0x00000000 161 #define CONFIG_SYS_DDR1_CS0_BNDS 0x0040007F 162 163 #define CONFIG_SYS_DDR_ZQ_CONTROL 0x89080600 164 #define CONFIG_SYS_DDR_SR_CNTR 0x00000000 165 #define CONFIG_SYS_DDR_RCW_1 0x00000000 166 #define CONFIG_SYS_DDR_RCW_2 0x00000000 167 #define CONFIG_SYS_DDR_CONTROL_800 0x470C0000 168 #define CONFIG_SYS_DDR_CONTROL_2_800 0x04401050 169 #define CONFIG_SYS_DDR_TIMING_4_800 0x00220001 170 #define CONFIG_SYS_DDR_TIMING_5_800 0x03402400 171 172 #define CONFIG_SYS_DDR_CONTROL_1333 0x470C0008 173 #define CONFIG_SYS_DDR_CONTROL_2_1333 0x24401010 174 #define CONFIG_SYS_DDR_TIMING_4_1333 0x00000001 175 #define CONFIG_SYS_DDR_TIMING_5_1333 0x03401400 176 177 #define CONFIG_SYS_DDR_TIMING_3_800 0x00020000 178 #define CONFIG_SYS_DDR_TIMING_0_800 0x00330004 179 #define CONFIG_SYS_DDR_TIMING_1_800 0x6f6B4846 180 #define CONFIG_SYS_DDR_TIMING_2_800 0x0FA8C8CF 181 #define CONFIG_SYS_DDR_CLK_CTRL_800 0x03000000 182 #define CONFIG_SYS_DDR_MODE_1_800 0x40461520 183 #define CONFIG_SYS_DDR_MODE_2_800 0x8000c000 184 #define CONFIG_SYS_DDR_INTERVAL_800 0x0C300000 185 #define CONFIG_SYS_DDR_WRLVL_CONTROL_800 0x8655A608 186 187 #define CONFIG_SYS_DDR_TIMING_3_1333 0x01061000 188 #define CONFIG_SYS_DDR_TIMING_0_1333 0x00440104 189 #define CONFIG_SYS_DDR_TIMING_1_1333 0x98913A45 190 #define CONFIG_SYS_DDR_TIMING_2_1333 0x0FB8B114 191 #define CONFIG_SYS_DDR_CLK_CTRL_1333 0x02800000 192 #define CONFIG_SYS_DDR_MODE_1_1333 0x00061A50 193 #define CONFIG_SYS_DDR_MODE_2_1333 0x00100000 194 #define CONFIG_SYS_DDR_INTERVAL_1333 0x144E0513 195 #define CONFIG_SYS_DDR_WRLVL_CONTROL_1333 0x8655F607 196 197 /*FIXME: the following params are constant w.r.t diff freq 198 combinations. this should be removed later 199 */ 200 #if CONFIG_DDR_CLK_FREQ == 100000000 201 #define CONFIG_SYS_DDR_CS0_CONFIG CONFIG_SYS_DDR_CS0_CONFIG_800 202 #define CONFIG_SYS_DDR_CONTROL CONFIG_SYS_DDR_CONTROL_800 203 #define CONFIG_SYS_DDR_CONTROL_2 CONFIG_SYS_DDR_CONTROL_2_800 204 #define CONFIG_SYS_DDR_TIMING_4 CONFIG_SYS_DDR_TIMING_4_800 205 #define CONFIG_SYS_DDR_TIMING_5 CONFIG_SYS_DDR_TIMING_5_800 206 #elif CONFIG_DDR_CLK_FREQ == 133000000 207 #define CONFIG_SYS_DDR_CS0_CONFIG CONFIG_SYS_DDR_CS0_CONFIG_1333 208 #define CONFIG_SYS_DDR_CONTROL CONFIG_SYS_DDR_CONTROL_1333 209 #define CONFIG_SYS_DDR_CONTROL_2 CONFIG_SYS_DDR_CONTROL_2_1333 210 #define CONFIG_SYS_DDR_TIMING_4 CONFIG_SYS_DDR_TIMING_4_1333 211 #define CONFIG_SYS_DDR_TIMING_5 CONFIG_SYS_DDR_TIMING_5_1333 212 #else 213 #define CONFIG_SYS_DDR_CS0_CONFIG CONFIG_SYS_DDR_CS0_CONFIG_800 214 #define CONFIG_SYS_DDR_CONTROL CONFIG_SYS_DDR_CONTROL_800 215 #define CONFIG_SYS_DDR_CONTROL_2 CONFIG_SYS_DDR_CONTROL_2_800 216 #define CONFIG_SYS_DDR_TIMING_4 CONFIG_SYS_DDR_TIMING_4_800 217 #define CONFIG_SYS_DDR_TIMING_5 CONFIG_SYS_DDR_TIMING_5_800 218 #endif 219 220 221 /* relocated CCSRBAR */ 222 #define CONFIG_SYS_CCSRBAR CONFIG_SYS_CCSRBAR_DEFAULT 223 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR_DEFAULT 224 225 #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR 226 227 /* DSP CCSRBAR */ 228 #define CONFIG_SYS_FSL_DSP_CCSRBAR CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT 229 #define CONFIG_SYS_FSL_DSP_CCSRBAR_PHYS CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT 230 231 /* 232 * IFC Definitions 233 */ 234 /* NOR Flash on IFC */ 235 236 #ifdef CONFIG_SPL_BUILD 237 #define CONFIG_SYS_NO_FLASH 238 #endif 239 #define CONFIG_SYS_FLASH_BASE 0x88000000 240 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* Max number of sector: 32M */ 241 242 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 243 244 #define CONFIG_SYS_NOR_CSPR 0x88000101 245 #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) 246 #define CONFIG_SYS_NOR_CSOR CSOR_NOR_ADM_SHIFT(5) 247 /* NOR Flash Timing Params */ 248 249 #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x01) \ 250 | FTIM0_NOR_TEADC(0x03) \ 251 | FTIM0_NOR_TAVDS(0x00) \ 252 | FTIM0_NOR_TEAHC(0x0f)) 253 #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x1d) \ 254 | FTIM1_NOR_TRAD_NOR(0x09) \ 255 | FTIM1_NOR_TSEQRAD_NOR(0x09)) 256 #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x1) \ 257 | FTIM2_NOR_TCH(0x4) \ 258 | FTIM2_NOR_TWPH(0x7) \ 259 | FTIM2_NOR_TWP(0x1e)) 260 #define CONFIG_SYS_NOR_FTIM3 0x0 261 262 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} 263 #define CONFIG_SYS_FLASH_QUIET_TEST 264 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 265 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ 266 267 #undef CONFIG_SYS_FLASH_CHECKSUM 268 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 269 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 270 271 /* CFI for NOR Flash */ 272 #define CONFIG_FLASH_CFI_DRIVER 273 #define CONFIG_SYS_FLASH_CFI 274 #define CONFIG_SYS_FLASH_EMPTY_INFO 275 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 276 277 /* NAND Flash on IFC */ 278 #define CONFIG_SYS_NAND_BASE 0xff800000 279 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE 280 281 #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 282 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ 283 | CSPR_MSEL_NAND /* MSEL = NAND */ \ 284 | CSPR_V) 285 #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) 286 287 #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ 288 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ 289 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ 290 | CSOR_NAND_RAL_2 /* RAL = 2Byes */ \ 291 | CSOR_NAND_PGS_2K /* Page Size = 2K */ \ 292 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \ 293 | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ 294 295 /* NAND Flash Timing Params */ 296 #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x03) \ 297 | FTIM0_NAND_TWP(0x05) \ 298 | FTIM0_NAND_TWCHT(0x02) \ 299 | FTIM0_NAND_TWH(0x04)) 300 #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x1c) \ 301 | FTIM1_NAND_TWBE(0x1e) \ 302 | FTIM1_NAND_TRR(0x07) \ 303 | FTIM1_NAND_TRP(0x05)) 304 #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x08) \ 305 | FTIM2_NAND_TREH(0x04) \ 306 | FTIM2_NAND_TWHRE(0x11)) 307 #define CONFIG_SYS_NAND_FTIM3 FTIM3_NAND_TWW(0x04) 308 309 #define CONFIG_SYS_NAND_DDR_LAW 11 310 311 /* NAND */ 312 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } 313 #define CONFIG_SYS_MAX_NAND_DEVICE 1 314 #define CONFIG_MTD_NAND_VERIFY_WRITE 315 #define CONFIG_CMD_NAND 316 317 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 318 319 #ifndef CONFIG_SPL_BUILD 320 #define CONFIG_FSL_QIXIS 321 #endif 322 #ifdef CONFIG_FSL_QIXIS 323 #define CONFIG_SYS_FPGA_BASE 0xffb00000 324 #define CONFIG_SYS_I2C_FPGA_ADDR 0x66 325 #define QIXIS_BASE CONFIG_SYS_FPGA_BASE 326 #define QIXIS_LBMAP_SWITCH 9 327 #define QIXIS_LBMAP_MASK 0x07 328 #define QIXIS_LBMAP_SHIFT 0 329 #define QIXIS_LBMAP_DFLTBANK 0x00 330 #define QIXIS_LBMAP_ALTBANK 0x04 331 #define QIXIS_RST_CTL_RESET 0x83 332 #define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 333 #define QIXIS_RCFG_CTL_RECONFIG_START 0x21 334 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 335 336 #define CONFIG_SYS_FPGA_BASE_PHYS CONFIG_SYS_FPGA_BASE 337 338 #define CONFIG_SYS_CSPR2 (CSPR_PHYS_ADDR(CONFIG_SYS_FPGA_BASE) \ 339 | CSPR_PORT_SIZE_8 \ 340 | CSPR_MSEL_GPCM \ 341 | CSPR_V) 342 #define CONFIG_SYS_AMASK2 IFC_AMASK(64*1024) 343 #define CONFIG_SYS_CSOR2 0x0 344 /* CPLD Timing parameters for IFC CS3 */ 345 #define CONFIG_SYS_CS2_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ 346 FTIM0_GPCM_TEADC(0x0e) | \ 347 FTIM0_GPCM_TEAHC(0x0e)) 348 #define CONFIG_SYS_CS2_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ 349 FTIM1_GPCM_TRAD(0x1f)) 350 #define CONFIG_SYS_CS2_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ 351 FTIM2_GPCM_TCH(0x0) | \ 352 FTIM2_GPCM_TWP(0x1f)) 353 #define CONFIG_SYS_CS2_FTIM3 0x0 354 #endif 355 356 /* Set up IFC registers for boot location NOR/NAND */ 357 #if defined(CONFIG_NAND) 358 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR 359 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK 360 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR 361 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 362 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 363 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 364 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 365 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR_CSPR 366 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK 367 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR 368 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 369 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 370 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 371 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 372 #else 373 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR_CSPR 374 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK 375 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR 376 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 377 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 378 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 379 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 380 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR 381 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK 382 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR 383 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0 384 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1 385 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2 386 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3 387 #endif 388 389 #define CONFIG_BOARD_EARLY_INIT_F /* Call board_pre_init */ 390 #define CONFIG_BOARD_EARLY_INIT_R 391 392 #define CONFIG_SYS_INIT_RAM_LOCK 393 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */ 394 #define CONFIG_SYS_INIT_RAM_END 0x00004000 /* End of used area in RAM */ 395 396 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END \ 397 - GENERATED_GBL_DATA_SIZE) 398 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 399 400 #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon*/ 401 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc*/ 402 403 /* Serial Port */ 404 #define CONFIG_CONS_INDEX 1 405 #undef CONFIG_SERIAL_SOFTWARE_FIFO 406 #define CONFIG_SYS_NS16550 407 #define CONFIG_SYS_NS16550_SERIAL 408 #define CONFIG_SYS_NS16550_REG_SIZE 1 409 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 410 #ifdef CONFIG_SPL_BUILD 411 #define CONFIG_NS16550_MIN_FUNCTIONS 412 #endif 413 414 #define CONFIG_SERIAL_MULTI 1 /* Enable both serial ports */ 415 #define CONFIG_SYS_CONSOLE_IS_IN_ENV /* determine from environment */ 416 417 #define CONFIG_SYS_BAUDRATE_TABLE \ 418 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 419 420 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR + 0x4500) 421 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR + 0x4600) 422 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR + 0x4700) 423 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR + 0x4800) 424 425 /* Use the HUSH parser */ 426 #define CONFIG_SYS_HUSH_PARSER /* hush parser */ 427 #ifdef CONFIG_SYS_HUSH_PARSER 428 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 429 #endif 430 431 /* 432 * Pass open firmware flat tree 433 */ 434 #define CONFIG_OF_LIBFDT 435 #define CONFIG_OF_BOARD_SETUP 436 #define CONFIG_OF_STDOUT_VIA_ALIAS 437 438 /* new uImage format support */ 439 #define CONFIG_FIT 440 #define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ 441 442 #define CONFIG_SYS_I2C 443 #define CONFIG_SYS_I2C_FSL 444 #define CONFIG_SYS_FSL_I2C_SPEED 400800 /* I2C speed and slave address*/ 445 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 446 #define CONFIG_SYS_FSL_I2C2_SPEED 400800 /* I2C speed and slave address*/ 447 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 448 #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 449 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 450 451 /* I2C EEPROM */ 452 #define CONFIG_ID_EEPROM 453 #ifdef CONFIG_ID_EEPROM 454 #define CONFIG_SYS_I2C_EEPROM_NXID 455 #endif 456 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 457 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 458 #define CONFIG_SYS_EEPROM_BUS_NUM 0 459 460 /* enable read and write access to EEPROM */ 461 #define CONFIG_CMD_EEPROM 462 #define CONFIG_SYS_I2C_MULTI_EEPROMS 463 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 464 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 465 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 466 467 /* I2C FPGA */ 468 #define CONFIG_I2C_FPGA 469 #define CONFIG_SYS_I2C_FPGA_ADDR 0x66 470 471 #define CONFIG_RTC_DS3231 472 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 473 474 /* 475 * SPI interface will not be available in case of NAND boot SPI CS0 will be 476 * used for SLIC 477 */ 478 /* eSPI - Enhanced SPI */ 479 #define CONFIG_FSL_ESPI /* SPI */ 480 #ifdef CONFIG_FSL_ESPI 481 #define CONFIG_SPI_FLASH 482 #define CONFIG_SPI_FLASH_SPANSION 483 #define CONFIG_CMD_SF 484 #define CONFIG_SF_DEFAULT_SPEED 10000000 485 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 486 #endif 487 488 #if defined(CONFIG_TSEC_ENET) 489 490 #define CONFIG_MII /* MII PHY management */ 491 #define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */ 492 #define CONFIG_TSEC1 1 493 #define CONFIG_TSEC1_NAME "eTSEC1" 494 #define CONFIG_TSEC2 1 495 #define CONFIG_TSEC2_NAME "eTSEC2" 496 497 #define TSEC1_PHY_ADDR 0 498 #define TSEC2_PHY_ADDR 1 499 500 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 501 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 502 503 #define TSEC1_PHYIDX 0 504 #define TSEC2_PHYIDX 0 505 506 #define CONFIG_ETHPRIME "eTSEC1" 507 508 #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ 509 510 /* TBI PHY configuration for SGMII mode */ 511 #define CONFIG_TSEC_TBICR_SETTINGS ( \ 512 TBICR_PHY_RESET \ 513 | TBICR_ANEG_ENABLE \ 514 | TBICR_FULL_DUPLEX \ 515 | TBICR_SPEED1_SET \ 516 ) 517 518 #endif /* CONFIG_TSEC_ENET */ 519 520 #define CONFIG_MMC 521 #ifdef CONFIG_MMC 522 #define CONFIG_CMD_MMC 523 #define CONFIG_DOS_PARTITION 524 #define CONFIG_FSL_ESDHC 525 #define CONFIG_GENERIC_MMC 526 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 527 #endif 528 529 #define CONFIG_USB_EHCI /* USB */ 530 #ifdef CONFIG_USB_EHCI 531 #define CONFIG_CMD_USB 532 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 533 #define CONFIG_USB_EHCI_FSL 534 #define CONFIG_USB_STORAGE 535 #define CONFIG_HAS_FSL_DR_USB 536 #endif 537 538 /* 539 * Environment 540 */ 541 #if defined(CONFIG_RAMBOOT_SDCARD) 542 #define CONFIG_ENV_IS_IN_MMC 543 #define CONFIG_SYS_MMC_ENV_DEV 0 544 #define CONFIG_ENV_SIZE 0x2000 545 #elif defined(CONFIG_RAMBOOT_SPIFLASH) 546 #define CONFIG_ENV_IS_IN_SPI_FLASH 547 #define CONFIG_ENV_SPI_BUS 0 548 #define CONFIG_ENV_SPI_CS 0 549 #define CONFIG_ENV_SPI_MAX_HZ 10000000 550 #define CONFIG_ENV_SPI_MODE 0 551 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 552 #define CONFIG_ENV_SECT_SIZE 0x10000 553 #define CONFIG_ENV_SIZE 0x2000 554 #elif defined(CONFIG_NAND) 555 #define CONFIG_ENV_IS_IN_NAND 556 #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE 557 #define CONFIG_ENV_OFFSET ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE) 558 #define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE) 559 #elif defined(CONFIG_SYS_RAMBOOT) 560 #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ 561 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) 562 #define CONFIG_ENV_SIZE 0x2000 563 #else 564 #define CONFIG_ENV_IS_IN_FLASH 565 #if CONFIG_SYS_MONITOR_BASE > 0xfff80000 566 #define CONFIG_ENV_ADDR 0xfff80000 567 #else 568 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 569 #endif 570 #define CONFIG_ENV_SIZE 0x2000 571 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 572 #endif 573 574 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 575 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 576 577 /* 578 * Command line configuration. 579 */ 580 #include <config_cmd_default.h> 581 582 #define CONFIG_CMD_DATE 583 #define CONFIG_CMD_DHCP 584 #define CONFIG_CMD_ELF 585 #define CONFIG_CMD_ERRATA 586 #define CONFIG_CMD_I2C 587 #define CONFIG_CMD_IRQ 588 #define CONFIG_CMD_MII 589 #define CONFIG_CMD_PING 590 #define CONFIG_CMD_SETEXPR 591 #define CONFIG_CMD_REGINFO 592 593 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) 594 #define CONFIG_CMD_EXT2 595 #define CONFIG_CMD_FAT 596 #define CONFIG_DOS_PARTITION 597 #endif 598 599 /* 600 * Miscellaneous configurable options 601 */ 602 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 603 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 604 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 605 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 606 607 #if defined(CONFIG_CMD_KGDB) 608 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 609 #else 610 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 611 #endif 612 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) 613 /* Print Buffer Size */ 614 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 615 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ 616 617 618 /* 619 * For booting Linux, the board info and command line data 620 * have to be in the first 64 MB of memory, since this is 621 * the maximum mapped by the Linux kernel during initialization. 622 */ 623 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux */ 624 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 625 626 #if defined(CONFIG_CMD_KGDB) 627 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 628 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ 629 #endif 630 631 /* 632 * Environment Configuration 633 */ 634 635 #if defined(CONFIG_TSEC_ENET) 636 #define CONFIG_HAS_ETH0 637 #define CONFIG_HAS_ETH1 638 #endif 639 640 #define CONFIG_HOSTNAME BSC9132qds 641 #define CONFIG_ROOTPATH "/opt/nfsroot" 642 #define CONFIG_BOOTFILE "uImage" 643 #define CONFIG_UBOOTPATH "u-boot.bin" 644 645 #define CONFIG_BAUDRATE 115200 646 647 #ifdef CONFIG_SDCARD 648 #define CONFIG_DEF_HWCONFIG "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0" 649 #else 650 #define CONFIG_DEF_HWCONFIG "hwconfig=sim;usb1:dr_mode=host,phy_type=ulpi\0" 651 #endif 652 653 #define CONFIG_EXTRA_ENV_SETTINGS \ 654 "netdev=eth0\0" \ 655 "uboot=" CONFIG_UBOOTPATH "\0" \ 656 "loadaddr=1000000\0" \ 657 "bootfile=uImage\0" \ 658 "consoledev=ttyS0\0" \ 659 "ramdiskaddr=2000000\0" \ 660 "ramdiskfile=rootfs.ext2.gz.uboot\0" \ 661 "fdtaddr=c00000\0" \ 662 "fdtfile=bsc9132qds.dtb\0" \ 663 "bdev=sda1\0" \ 664 CONFIG_DEF_HWCONFIG\ 665 "othbootargs=mem=880M ramdisk_size=600000 " \ 666 "default_hugepagesz=256m hugepagesz=256m hugepages=1 " \ 667 "isolcpus=0\0" \ 668 "usbext2boot=setenv bootargs root=/dev/ram rw " \ 669 "console=$consoledev,$baudrate $othbootargs; " \ 670 "usb start;" \ 671 "ext2load usb 0:4 $loadaddr $bootfile;" \ 672 "ext2load usb 0:4 $fdtaddr $fdtfile;" \ 673 "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \ 674 "bootm $loadaddr $ramdiskaddr $fdtaddr\0" \ 675 "debug_halt_off=mw ff7e0e30 0xf0000000;" 676 677 #define CONFIG_NFSBOOTCOMMAND \ 678 "setenv bootargs root=/dev/nfs rw " \ 679 "nfsroot=$serverip:$rootpath " \ 680 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 681 "console=$consoledev,$baudrate $othbootargs;" \ 682 "tftp $loadaddr $bootfile;" \ 683 "tftp $fdtaddr $fdtfile;" \ 684 "bootm $loadaddr - $fdtaddr" 685 686 #define CONFIG_HDBOOT \ 687 "setenv bootargs root=/dev/$bdev rw rootdelay=30 " \ 688 "console=$consoledev,$baudrate $othbootargs;" \ 689 "usb start;" \ 690 "ext2load usb 0:1 $loadaddr /boot/$bootfile;" \ 691 "ext2load usb 0:1 $fdtaddr /boot/$fdtfile;" \ 692 "bootm $loadaddr - $fdtaddr" 693 694 #define CONFIG_RAMBOOTCOMMAND \ 695 "setenv bootargs root=/dev/ram rw " \ 696 "console=$consoledev,$baudrate $othbootargs; " \ 697 "tftp $ramdiskaddr $ramdiskfile;" \ 698 "tftp $loadaddr $bootfile;" \ 699 "tftp $fdtaddr $fdtfile;" \ 700 "bootm $loadaddr $ramdiskaddr $fdtaddr" 701 702 #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND 703 704 #endif /* __CONFIG_H */ 705