1 /* 2 * Copyright 2013 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 /* 8 * BSC9132 QDS board configuration file 9 */ 10 11 #ifndef __CONFIG_H 12 #define __CONFIG_H 13 14 #define CONFIG_MISC_INIT_R 15 16 #ifdef CONFIG_SDCARD 17 #define CONFIG_RAMBOOT_SDCARD 18 #define CONFIG_SYS_RAMBOOT 19 #define CONFIG_SYS_EXTRA_ENV_RELOC 20 #define CONFIG_SYS_TEXT_BASE 0x11000000 21 #define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc 22 #endif 23 #ifdef CONFIG_SPIFLASH 24 #define CONFIG_RAMBOOT_SPIFLASH 25 #define CONFIG_SYS_RAMBOOT 26 #define CONFIG_SYS_EXTRA_ENV_RELOC 27 #define CONFIG_SYS_TEXT_BASE 0x11000000 28 #define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc 29 #endif 30 #ifdef CONFIG_NAND_SECBOOT 31 #define CONFIG_RAMBOOT_NAND 32 #define CONFIG_SYS_RAMBOOT 33 #define CONFIG_SYS_EXTRA_ENV_RELOC 34 #define CONFIG_SYS_TEXT_BASE 0x11000000 35 #define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc 36 #endif 37 38 #ifdef CONFIG_NAND 39 #define CONFIG_SPL_INIT_MINIMAL 40 #define CONFIG_SPL_NAND_BOOT 41 #define CONFIG_SPL_FLUSH_IMAGE 42 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 43 44 #define CONFIG_SYS_TEXT_BASE 0x00201000 45 #define CONFIG_SPL_TEXT_BASE 0xFFFFE000 46 #define CONFIG_SPL_MAX_SIZE 8192 47 #define CONFIG_SPL_RELOC_TEXT_BASE 0x00100000 48 #define CONFIG_SPL_RELOC_STACK 0x00100000 49 #define CONFIG_SYS_NAND_U_BOOT_SIZE ((768 << 10) - 0x2000) 50 #define CONFIG_SYS_NAND_U_BOOT_DST (0x00200000 - CONFIG_SPL_MAX_SIZE) 51 #define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 52 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0 53 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" 54 #endif 55 56 #ifndef CONFIG_SYS_TEXT_BASE 57 #define CONFIG_SYS_TEXT_BASE 0x8ff40000 58 #endif 59 60 #ifndef CONFIG_RESET_VECTOR_ADDRESS 61 #define CONFIG_RESET_VECTOR_ADDRESS 0x8ffffffc 62 #endif 63 64 #ifdef CONFIG_SPL_BUILD 65 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE 66 #else 67 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 68 #endif 69 70 /* High Level Configuration Options */ 71 #define CONFIG_SYS_HAS_SERDES /* common SERDES init code */ 72 73 #if defined(CONFIG_PCI) 74 #define CONFIG_PCIE1 /* PCIE controller 1 (slot 1) */ 75 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 76 #define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ 77 #define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ 78 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 79 80 #define CONFIG_CMD_PCI 81 82 /* 83 * PCI Windows 84 * Memory space is mapped 1-1, but I/O space must start from 0. 85 */ 86 /* controller 1, Slot 1, tgtid 1, Base address a000 */ 87 #define CONFIG_SYS_PCIE1_NAME "PCIe Slot" 88 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x90000000 89 #define CONFIG_SYS_PCIE1_MEM_BUS 0x90000000 90 #define CONFIG_SYS_PCIE1_MEM_PHYS 0x90000000 91 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 /* 256M */ 92 #define CONFIG_SYS_PCIE1_IO_VIRT 0xC0010000 93 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 94 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 95 #define CONFIG_SYS_PCIE1_IO_PHYS 0xC0010000 96 97 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 98 #endif 99 100 #define CONFIG_ENV_OVERWRITE 101 #define CONFIG_TSEC_ENET /* ethernet */ 102 103 #if defined(CONFIG_SYS_CLK_100_DDR_100) 104 #define CONFIG_SYS_CLK_FREQ 100000000 105 #define CONFIG_DDR_CLK_FREQ 100000000 106 #elif defined(CONFIG_SYS_CLK_100_DDR_133) 107 #define CONFIG_SYS_CLK_FREQ 100000000 108 #define CONFIG_DDR_CLK_FREQ 133000000 109 #endif 110 111 #define CONFIG_MP 112 113 #define CONFIG_HWCONFIG 114 /* 115 * These can be toggled for performance analysis, otherwise use default. 116 */ 117 #define CONFIG_L2_CACHE /* toggle L2 cache */ 118 #define CONFIG_BTB /* enable branch predition */ 119 120 #define CONFIG_SYS_MEMTEST_START 0x01000000 /* memtest works on */ 121 #define CONFIG_SYS_MEMTEST_END 0x01ffffff 122 123 /* DDR Setup */ 124 #define CONFIG_SYS_SPD_BUS_NUM 0 125 #define SPD_EEPROM_ADDRESS1 0x54 /* I2C access */ 126 #define SPD_EEPROM_ADDRESS2 0x56 /* I2C access */ 127 #define CONFIG_FSL_DDR_INTERACTIVE 128 129 #define CONFIG_MEM_INIT_VALUE 0xDeadBeef 130 131 #define CONFIG_SYS_SDRAM_SIZE (1024) 132 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 133 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 134 135 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 136 137 /* DDR3 Controller Settings */ 138 #define CONFIG_CHIP_SELECTS_PER_CTRL 1 139 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000003F 140 #define CONFIG_SYS_DDR_CS0_CONFIG_1333 0x80004302 141 #define CONFIG_SYS_DDR_CS0_CONFIG_800 0x80014302 142 #define CONFIG_SYS_DDR_CS0_CONFIG_2 0x00000000 143 #define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef 144 #define CONFIG_SYS_DDR_INIT_ADDR 0x00000000 145 #define CONFIG_SYS_DDR_INIT_EXT_ADDR 0x00000000 146 #define CONFIG_SYS_DDR_MODE_CONTROL 0x00000000 147 #define CONFIG_SYS_DDR1_CS0_BNDS 0x0040007F 148 149 #define CONFIG_SYS_DDR_ZQ_CONTROL 0x89080600 150 #define CONFIG_SYS_DDR_SR_CNTR 0x00000000 151 #define CONFIG_SYS_DDR_RCW_1 0x00000000 152 #define CONFIG_SYS_DDR_RCW_2 0x00000000 153 #define CONFIG_SYS_DDR_CONTROL_800 0x470C0000 154 #define CONFIG_SYS_DDR_CONTROL_2_800 0x04401050 155 #define CONFIG_SYS_DDR_TIMING_4_800 0x00220001 156 #define CONFIG_SYS_DDR_TIMING_5_800 0x03402400 157 158 #define CONFIG_SYS_DDR_CONTROL_1333 0x470C0008 159 #define CONFIG_SYS_DDR_CONTROL_2_1333 0x24401010 160 #define CONFIG_SYS_DDR_TIMING_4_1333 0x00000001 161 #define CONFIG_SYS_DDR_TIMING_5_1333 0x03401400 162 163 #define CONFIG_SYS_DDR_TIMING_3_800 0x00020000 164 #define CONFIG_SYS_DDR_TIMING_0_800 0x00330004 165 #define CONFIG_SYS_DDR_TIMING_1_800 0x6f6B4846 166 #define CONFIG_SYS_DDR_TIMING_2_800 0x0FA8C8CF 167 #define CONFIG_SYS_DDR_CLK_CTRL_800 0x03000000 168 #define CONFIG_SYS_DDR_MODE_1_800 0x40461520 169 #define CONFIG_SYS_DDR_MODE_2_800 0x8000c000 170 #define CONFIG_SYS_DDR_INTERVAL_800 0x0C300000 171 #define CONFIG_SYS_DDR_WRLVL_CONTROL_800 0x8655A608 172 173 #define CONFIG_SYS_DDR_TIMING_3_1333 0x01061000 174 #define CONFIG_SYS_DDR_TIMING_0_1333 0x00440104 175 #define CONFIG_SYS_DDR_TIMING_1_1333 0x98913A45 176 #define CONFIG_SYS_DDR_TIMING_2_1333 0x0FB8B114 177 #define CONFIG_SYS_DDR_CLK_CTRL_1333 0x02800000 178 #define CONFIG_SYS_DDR_MODE_1_1333 0x00061A50 179 #define CONFIG_SYS_DDR_MODE_2_1333 0x00100000 180 #define CONFIG_SYS_DDR_INTERVAL_1333 0x144E0513 181 #define CONFIG_SYS_DDR_WRLVL_CONTROL_1333 0x8655F607 182 183 /*FIXME: the following params are constant w.r.t diff freq 184 combinations. this should be removed later 185 */ 186 #if CONFIG_DDR_CLK_FREQ == 100000000 187 #define CONFIG_SYS_DDR_CS0_CONFIG CONFIG_SYS_DDR_CS0_CONFIG_800 188 #define CONFIG_SYS_DDR_CONTROL CONFIG_SYS_DDR_CONTROL_800 189 #define CONFIG_SYS_DDR_CONTROL_2 CONFIG_SYS_DDR_CONTROL_2_800 190 #define CONFIG_SYS_DDR_TIMING_4 CONFIG_SYS_DDR_TIMING_4_800 191 #define CONFIG_SYS_DDR_TIMING_5 CONFIG_SYS_DDR_TIMING_5_800 192 #elif CONFIG_DDR_CLK_FREQ == 133000000 193 #define CONFIG_SYS_DDR_CS0_CONFIG CONFIG_SYS_DDR_CS0_CONFIG_1333 194 #define CONFIG_SYS_DDR_CONTROL CONFIG_SYS_DDR_CONTROL_1333 195 #define CONFIG_SYS_DDR_CONTROL_2 CONFIG_SYS_DDR_CONTROL_2_1333 196 #define CONFIG_SYS_DDR_TIMING_4 CONFIG_SYS_DDR_TIMING_4_1333 197 #define CONFIG_SYS_DDR_TIMING_5 CONFIG_SYS_DDR_TIMING_5_1333 198 #else 199 #define CONFIG_SYS_DDR_CS0_CONFIG CONFIG_SYS_DDR_CS0_CONFIG_800 200 #define CONFIG_SYS_DDR_CONTROL CONFIG_SYS_DDR_CONTROL_800 201 #define CONFIG_SYS_DDR_CONTROL_2 CONFIG_SYS_DDR_CONTROL_2_800 202 #define CONFIG_SYS_DDR_TIMING_4 CONFIG_SYS_DDR_TIMING_4_800 203 #define CONFIG_SYS_DDR_TIMING_5 CONFIG_SYS_DDR_TIMING_5_800 204 #endif 205 206 /* relocated CCSRBAR */ 207 #define CONFIG_SYS_CCSRBAR CONFIG_SYS_CCSRBAR_DEFAULT 208 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR_DEFAULT 209 210 #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR 211 212 /* DSP CCSRBAR */ 213 #define CONFIG_SYS_FSL_DSP_CCSRBAR CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT 214 #define CONFIG_SYS_FSL_DSP_CCSRBAR_PHYS CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT 215 216 /* 217 * IFC Definitions 218 */ 219 /* NOR Flash on IFC */ 220 221 #define CONFIG_SYS_FLASH_BASE 0x88000000 222 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* Max number of sector: 32M */ 223 224 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 225 226 #define CONFIG_SYS_NOR_CSPR 0x88000101 227 #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) 228 #define CONFIG_SYS_NOR_CSOR CSOR_NOR_ADM_SHIFT(5) 229 /* NOR Flash Timing Params */ 230 231 #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x01) \ 232 | FTIM0_NOR_TEADC(0x03) \ 233 | FTIM0_NOR_TAVDS(0x00) \ 234 | FTIM0_NOR_TEAHC(0x0f)) 235 #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x1d) \ 236 | FTIM1_NOR_TRAD_NOR(0x09) \ 237 | FTIM1_NOR_TSEQRAD_NOR(0x09)) 238 #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x1) \ 239 | FTIM2_NOR_TCH(0x4) \ 240 | FTIM2_NOR_TWPH(0x7) \ 241 | FTIM2_NOR_TWP(0x1e)) 242 #define CONFIG_SYS_NOR_FTIM3 0x0 243 244 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} 245 #define CONFIG_SYS_FLASH_QUIET_TEST 246 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 247 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ 248 249 #undef CONFIG_SYS_FLASH_CHECKSUM 250 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 251 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 252 253 /* CFI for NOR Flash */ 254 #define CONFIG_FLASH_CFI_DRIVER 255 #define CONFIG_SYS_FLASH_CFI 256 #define CONFIG_SYS_FLASH_EMPTY_INFO 257 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 258 259 /* NAND Flash on IFC */ 260 #define CONFIG_SYS_NAND_BASE 0xff800000 261 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE 262 263 #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 264 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ 265 | CSPR_MSEL_NAND /* MSEL = NAND */ \ 266 | CSPR_V) 267 #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) 268 269 #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ 270 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ 271 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ 272 | CSOR_NAND_RAL_2 /* RAL = 2Byes */ \ 273 | CSOR_NAND_PGS_2K /* Page Size = 2K */ \ 274 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \ 275 | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ 276 277 /* NAND Flash Timing Params */ 278 #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x03) \ 279 | FTIM0_NAND_TWP(0x05) \ 280 | FTIM0_NAND_TWCHT(0x02) \ 281 | FTIM0_NAND_TWH(0x04)) 282 #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x1c) \ 283 | FTIM1_NAND_TWBE(0x1e) \ 284 | FTIM1_NAND_TRR(0x07) \ 285 | FTIM1_NAND_TRP(0x05)) 286 #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x08) \ 287 | FTIM2_NAND_TREH(0x04) \ 288 | FTIM2_NAND_TWHRE(0x11)) 289 #define CONFIG_SYS_NAND_FTIM3 FTIM3_NAND_TWW(0x04) 290 291 #define CONFIG_SYS_NAND_DDR_LAW 11 292 293 /* NAND */ 294 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } 295 #define CONFIG_SYS_MAX_NAND_DEVICE 1 296 297 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 298 299 #ifndef CONFIG_SPL_BUILD 300 #define CONFIG_FSL_QIXIS 301 #endif 302 #ifdef CONFIG_FSL_QIXIS 303 #define CONFIG_SYS_FPGA_BASE 0xffb00000 304 #define CONFIG_SYS_I2C_FPGA_ADDR 0x66 305 #define QIXIS_BASE CONFIG_SYS_FPGA_BASE 306 #define QIXIS_LBMAP_SWITCH 9 307 #define QIXIS_LBMAP_MASK 0x07 308 #define QIXIS_LBMAP_SHIFT 0 309 #define QIXIS_LBMAP_DFLTBANK 0x00 310 #define QIXIS_LBMAP_ALTBANK 0x04 311 #define QIXIS_RST_CTL_RESET 0x83 312 #define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 313 #define QIXIS_RCFG_CTL_RECONFIG_START 0x21 314 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 315 316 #define CONFIG_SYS_FPGA_BASE_PHYS CONFIG_SYS_FPGA_BASE 317 318 #define CONFIG_SYS_CSPR2 (CSPR_PHYS_ADDR(CONFIG_SYS_FPGA_BASE) \ 319 | CSPR_PORT_SIZE_8 \ 320 | CSPR_MSEL_GPCM \ 321 | CSPR_V) 322 #define CONFIG_SYS_AMASK2 IFC_AMASK(64*1024) 323 #define CONFIG_SYS_CSOR2 0x0 324 /* CPLD Timing parameters for IFC CS3 */ 325 #define CONFIG_SYS_CS2_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ 326 FTIM0_GPCM_TEADC(0x0e) | \ 327 FTIM0_GPCM_TEAHC(0x0e)) 328 #define CONFIG_SYS_CS2_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ 329 FTIM1_GPCM_TRAD(0x1f)) 330 #define CONFIG_SYS_CS2_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ 331 FTIM2_GPCM_TCH(0x8) | \ 332 FTIM2_GPCM_TWP(0x1f)) 333 #define CONFIG_SYS_CS2_FTIM3 0x0 334 #endif 335 336 /* Set up IFC registers for boot location NOR/NAND */ 337 #if defined(CONFIG_NAND) || defined(CONFIG_NAND_SECBOOT) 338 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR 339 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK 340 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR 341 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 342 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 343 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 344 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 345 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR_CSPR 346 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK 347 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR 348 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 349 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 350 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 351 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 352 #else 353 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR_CSPR 354 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK 355 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR 356 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 357 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 358 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 359 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 360 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR 361 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK 362 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR 363 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0 364 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1 365 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2 366 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3 367 #endif 368 369 #define CONFIG_BOARD_EARLY_INIT_R 370 371 #define CONFIG_SYS_INIT_RAM_LOCK 372 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */ 373 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* End of used area in RAM */ 374 375 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE \ 376 - GENERATED_GBL_DATA_SIZE) 377 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 378 379 #define CONFIG_SYS_MONITOR_LEN (768 * 1024) 380 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc*/ 381 382 /* Serial Port */ 383 #define CONFIG_CONS_INDEX 1 384 #undef CONFIG_SERIAL_SOFTWARE_FIFO 385 #define CONFIG_SYS_NS16550_SERIAL 386 #define CONFIG_SYS_NS16550_REG_SIZE 1 387 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 388 #ifdef CONFIG_SPL_BUILD 389 #define CONFIG_NS16550_MIN_FUNCTIONS 390 #endif 391 392 #define CONFIG_SYS_BAUDRATE_TABLE \ 393 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 394 395 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR + 0x4500) 396 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR + 0x4600) 397 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR + 0x4700) 398 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR + 0x4800) 399 400 #define CONFIG_SYS_I2C 401 #define CONFIG_SYS_I2C_FSL 402 #define CONFIG_SYS_FSL_I2C_SPEED 400800 /* I2C speed and slave address*/ 403 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 404 #define CONFIG_SYS_FSL_I2C2_SPEED 400800 /* I2C speed and slave address*/ 405 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 406 #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 407 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 408 409 /* I2C EEPROM */ 410 #define CONFIG_ID_EEPROM 411 #ifdef CONFIG_ID_EEPROM 412 #define CONFIG_SYS_I2C_EEPROM_NXID 413 #endif 414 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 415 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 416 #define CONFIG_SYS_EEPROM_BUS_NUM 0 417 418 /* enable read and write access to EEPROM */ 419 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 420 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 421 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 422 423 /* I2C FPGA */ 424 #define CONFIG_I2C_FPGA 425 #define CONFIG_SYS_I2C_FPGA_ADDR 0x66 426 427 #define CONFIG_RTC_DS3231 428 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 429 430 /* 431 * SPI interface will not be available in case of NAND boot SPI CS0 will be 432 * used for SLIC 433 */ 434 /* eSPI - Enhanced SPI */ 435 #ifdef CONFIG_FSL_ESPI 436 #define CONFIG_SF_DEFAULT_SPEED 10000000 437 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 438 #endif 439 440 #if defined(CONFIG_TSEC_ENET) 441 442 #define CONFIG_MII /* MII PHY management */ 443 #define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */ 444 #define CONFIG_TSEC1 1 445 #define CONFIG_TSEC1_NAME "eTSEC1" 446 #define CONFIG_TSEC2 1 447 #define CONFIG_TSEC2_NAME "eTSEC2" 448 449 #define TSEC1_PHY_ADDR 0 450 #define TSEC2_PHY_ADDR 1 451 452 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 453 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 454 455 #define TSEC1_PHYIDX 0 456 #define TSEC2_PHYIDX 0 457 458 #define CONFIG_ETHPRIME "eTSEC1" 459 460 #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ 461 462 /* TBI PHY configuration for SGMII mode */ 463 #define CONFIG_TSEC_TBICR_SETTINGS ( \ 464 TBICR_PHY_RESET \ 465 | TBICR_ANEG_ENABLE \ 466 | TBICR_FULL_DUPLEX \ 467 | TBICR_SPEED1_SET \ 468 ) 469 470 #endif /* CONFIG_TSEC_ENET */ 471 472 #ifdef CONFIG_MMC 473 #define CONFIG_FSL_ESDHC 474 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 475 #endif 476 477 #ifdef CONFIG_USB_EHCI_HCD 478 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 479 #define CONFIG_USB_EHCI_FSL 480 #define CONFIG_HAS_FSL_DR_USB 481 #endif 482 483 /* 484 * Environment 485 */ 486 #if defined(CONFIG_RAMBOOT_SDCARD) 487 #define CONFIG_FSL_FIXED_MMC_LOCATION 488 #define CONFIG_SYS_MMC_ENV_DEV 0 489 #define CONFIG_ENV_SIZE 0x2000 490 #elif defined(CONFIG_RAMBOOT_SPIFLASH) 491 #define CONFIG_ENV_SPI_BUS 0 492 #define CONFIG_ENV_SPI_CS 0 493 #define CONFIG_ENV_SPI_MAX_HZ 10000000 494 #define CONFIG_ENV_SPI_MODE 0 495 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 496 #define CONFIG_ENV_SECT_SIZE 0x10000 497 #define CONFIG_ENV_SIZE 0x2000 498 #elif defined(CONFIG_NAND) || defined(CONFIG_NAND_SECBOOT) 499 #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE 500 #define CONFIG_ENV_OFFSET ((768 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE) 501 #define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE) 502 #elif defined(CONFIG_SYS_RAMBOOT) 503 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) 504 #define CONFIG_ENV_SIZE 0x2000 505 #else 506 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 507 #define CONFIG_ENV_SIZE 0x2000 508 #define CONFIG_ENV_SECT_SIZE 0x20000 509 #endif 510 511 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 512 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 513 514 /* 515 * Command line configuration. 516 */ 517 #define CONFIG_CMD_REGINFO 518 519 /* 520 * Miscellaneous configurable options 521 */ 522 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 523 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 524 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 525 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 526 527 #if defined(CONFIG_CMD_KGDB) 528 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 529 #else 530 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 531 #endif 532 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) 533 /* Print Buffer Size */ 534 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 535 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ 536 537 /* 538 * For booting Linux, the board info and command line data 539 * have to be in the first 64 MB of memory, since this is 540 * the maximum mapped by the Linux kernel during initialization. 541 */ 542 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux */ 543 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 544 545 #if defined(CONFIG_CMD_KGDB) 546 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 547 #endif 548 549 /* 550 * Dynamic MTD Partition support with mtdparts 551 */ 552 #ifdef CONFIG_MTD_NOR_FLASH 553 #define CONFIG_MTD_DEVICE 554 #define CONFIG_MTD_PARTITIONS 555 #define CONFIG_FLASH_CFI_MTD 556 #define MTDIDS_DEFAULT "nor0=88000000.nor,nand0=ff800000.flash," 557 #define MTDPARTS_DEFAULT "mtdparts=88000000.nor:256k(dtb),7m(kernel)," \ 558 "55m(fs),1m(uboot);ff800000.flash:1m(uboot)," \ 559 "8m(kernel),512k(dtb),-(fs)" 560 #endif 561 /* 562 * Environment Configuration 563 */ 564 565 #if defined(CONFIG_TSEC_ENET) 566 #define CONFIG_HAS_ETH0 567 #define CONFIG_HAS_ETH1 568 #endif 569 570 #define CONFIG_HOSTNAME BSC9132qds 571 #define CONFIG_ROOTPATH "/opt/nfsroot" 572 #define CONFIG_BOOTFILE "uImage" 573 #define CONFIG_UBOOTPATH "u-boot.bin" 574 575 #ifdef CONFIG_SDCARD 576 #define CONFIG_DEF_HWCONFIG "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0" 577 #else 578 #define CONFIG_DEF_HWCONFIG "hwconfig=sim;usb1:dr_mode=host,phy_type=ulpi\0" 579 #endif 580 581 #define CONFIG_EXTRA_ENV_SETTINGS \ 582 "netdev=eth0\0" \ 583 "uboot=" CONFIG_UBOOTPATH "\0" \ 584 "loadaddr=1000000\0" \ 585 "bootfile=uImage\0" \ 586 "consoledev=ttyS0\0" \ 587 "ramdiskaddr=2000000\0" \ 588 "ramdiskfile=rootfs.ext2.gz.uboot\0" \ 589 "fdtaddr=1e00000\0" \ 590 "fdtfile=bsc9132qds.dtb\0" \ 591 "bdev=sda1\0" \ 592 CONFIG_DEF_HWCONFIG\ 593 "othbootargs=mem=880M ramdisk_size=600000 " \ 594 "default_hugepagesz=256m hugepagesz=256m hugepages=1 " \ 595 "isolcpus=0\0" \ 596 "usbext2boot=setenv bootargs root=/dev/ram rw " \ 597 "console=$consoledev,$baudrate $othbootargs; " \ 598 "usb start;" \ 599 "ext2load usb 0:4 $loadaddr $bootfile;" \ 600 "ext2load usb 0:4 $fdtaddr $fdtfile;" \ 601 "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \ 602 "bootm $loadaddr $ramdiskaddr $fdtaddr\0" \ 603 "debug_halt_off=mw ff7e0e30 0xf0000000;" 604 605 #define CONFIG_NFSBOOTCOMMAND \ 606 "setenv bootargs root=/dev/nfs rw " \ 607 "nfsroot=$serverip:$rootpath " \ 608 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 609 "console=$consoledev,$baudrate $othbootargs;" \ 610 "tftp $loadaddr $bootfile;" \ 611 "tftp $fdtaddr $fdtfile;" \ 612 "bootm $loadaddr - $fdtaddr" 613 614 #define CONFIG_HDBOOT \ 615 "setenv bootargs root=/dev/$bdev rw rootdelay=30 " \ 616 "console=$consoledev,$baudrate $othbootargs;" \ 617 "usb start;" \ 618 "ext2load usb 0:1 $loadaddr /boot/$bootfile;" \ 619 "ext2load usb 0:1 $fdtaddr /boot/$fdtfile;" \ 620 "bootm $loadaddr - $fdtaddr" 621 622 #define CONFIG_RAMBOOTCOMMAND \ 623 "setenv bootargs root=/dev/ram rw " \ 624 "console=$consoledev,$baudrate $othbootargs; " \ 625 "tftp $ramdiskaddr $ramdiskfile;" \ 626 "tftp $loadaddr $bootfile;" \ 627 "tftp $fdtaddr $fdtfile;" \ 628 "bootm $loadaddr $ramdiskaddr $fdtaddr" 629 630 #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND 631 632 #include <asm/fsl_secure_boot.h> 633 634 #endif /* __CONFIG_H */ 635