1 /* 2 * Copyright 2013 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 /* 8 * BSC9132 QDS board configuration file 9 */ 10 11 #ifndef __CONFIG_H 12 #define __CONFIG_H 13 14 #define CONFIG_DISPLAY_BOARDINFO 15 16 #ifdef CONFIG_BSC9132QDS 17 #define CONFIG_BSC9132 18 #endif 19 20 #define CONFIG_MISC_INIT_R 21 22 #ifdef CONFIG_SDCARD 23 #define CONFIG_RAMBOOT_SDCARD 24 #define CONFIG_SYS_RAMBOOT 25 #define CONFIG_SYS_EXTRA_ENV_RELOC 26 #define CONFIG_SYS_TEXT_BASE 0x11000000 27 #define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc 28 #endif 29 #define CONFIG_SYS_FSL_ERRATUM_IFC_A002769 1 30 #ifdef CONFIG_SPIFLASH 31 #define CONFIG_RAMBOOT_SPIFLASH 32 #define CONFIG_SYS_RAMBOOT 33 #define CONFIG_SYS_EXTRA_ENV_RELOC 34 #define CONFIG_SYS_TEXT_BASE 0x11000000 35 #define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc 36 #endif 37 #ifdef CONFIG_NAND_SECBOOT 38 #define CONFIG_RAMBOOT_NAND 39 #define CONFIG_SYS_RAMBOOT 40 #define CONFIG_SYS_EXTRA_ENV_RELOC 41 #define CONFIG_SYS_TEXT_BASE 0x11000000 42 #define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc 43 #endif 44 45 #ifdef CONFIG_NAND 46 #define CONFIG_SPL_INIT_MINIMAL 47 #define CONFIG_SPL_SERIAL_SUPPORT 48 #define CONFIG_SPL_NAND_SUPPORT 49 #define CONFIG_SPL_NAND_BOOT 50 #define CONFIG_SPL_FLUSH_IMAGE 51 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 52 53 #define CONFIG_SYS_TEXT_BASE 0x00201000 54 #define CONFIG_SPL_TEXT_BASE 0xFFFFE000 55 #define CONFIG_SPL_MAX_SIZE 8192 56 #define CONFIG_SPL_RELOC_TEXT_BASE 0x00100000 57 #define CONFIG_SPL_RELOC_STACK 0x00100000 58 #define CONFIG_SYS_NAND_U_BOOT_SIZE ((768 << 10) - 0x2000) 59 #define CONFIG_SYS_NAND_U_BOOT_DST (0x00200000 - CONFIG_SPL_MAX_SIZE) 60 #define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 61 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0 62 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" 63 #endif 64 65 #ifndef CONFIG_SYS_TEXT_BASE 66 #define CONFIG_SYS_TEXT_BASE 0x8ff40000 67 #endif 68 69 #ifndef CONFIG_RESET_VECTOR_ADDRESS 70 #define CONFIG_RESET_VECTOR_ADDRESS 0x8ffffffc 71 #endif 72 73 #ifdef CONFIG_SPL_BUILD 74 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE 75 #else 76 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 77 #endif 78 79 /* High Level Configuration Options */ 80 #define CONFIG_BOOKE /* BOOKE */ 81 #define CONFIG_E500 /* BOOKE e500 family */ 82 #define CONFIG_FSL_IFC /* Enable IFC Support */ 83 #define CONFIG_FSL_CAAM /* Enable SEC/CAAM */ 84 #define CONFIG_SYS_HAS_SERDES /* common SERDES init code */ 85 86 #define CONFIG_PCI /* Enable PCI/PCIE */ 87 #if defined(CONFIG_PCI) 88 #define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */ 89 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 90 #define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ 91 #define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ 92 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 93 94 #define CONFIG_CMD_PCI 95 96 97 /* 98 * PCI Windows 99 * Memory space is mapped 1-1, but I/O space must start from 0. 100 */ 101 /* controller 1, Slot 1, tgtid 1, Base address a000 */ 102 #define CONFIG_SYS_PCIE1_NAME "PCIe Slot" 103 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x90000000 104 #define CONFIG_SYS_PCIE1_MEM_BUS 0x90000000 105 #define CONFIG_SYS_PCIE1_MEM_PHYS 0x90000000 106 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 /* 256M */ 107 #define CONFIG_SYS_PCIE1_IO_VIRT 0xC0010000 108 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 109 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 110 #define CONFIG_SYS_PCIE1_IO_PHYS 0xC0010000 111 112 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 113 114 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 115 #define CONFIG_DOS_PARTITION 116 #endif 117 118 #define CONFIG_FSL_LAW /* Use common FSL init code */ 119 #define CONFIG_ENV_OVERWRITE 120 #define CONFIG_TSEC_ENET /* ethernet */ 121 122 #if defined(CONFIG_SYS_CLK_100_DDR_100) 123 #define CONFIG_SYS_CLK_FREQ 100000000 124 #define CONFIG_DDR_CLK_FREQ 100000000 125 #elif defined(CONFIG_SYS_CLK_100_DDR_133) 126 #define CONFIG_SYS_CLK_FREQ 100000000 127 #define CONFIG_DDR_CLK_FREQ 133000000 128 #endif 129 130 #define CONFIG_MP 131 132 #define CONFIG_HWCONFIG 133 /* 134 * These can be toggled for performance analysis, otherwise use default. 135 */ 136 #define CONFIG_L2_CACHE /* toggle L2 cache */ 137 #define CONFIG_BTB /* enable branch predition */ 138 139 #define CONFIG_SYS_MEMTEST_START 0x01000000 /* memtest works on */ 140 #define CONFIG_SYS_MEMTEST_END 0x01ffffff 141 142 /* DDR Setup */ 143 #define CONFIG_SYS_FSL_DDR3 144 #define CONFIG_SYS_SPD_BUS_NUM 0 145 #define SPD_EEPROM_ADDRESS1 0x54 /* I2C access */ 146 #define SPD_EEPROM_ADDRESS2 0x56 /* I2C access */ 147 #define CONFIG_FSL_DDR_INTERACTIVE 148 149 #define CONFIG_MEM_INIT_VALUE 0xDeadBeef 150 151 #define CONFIG_SYS_SDRAM_SIZE (1024) 152 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 153 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 154 155 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 156 157 /* DDR3 Controller Settings */ 158 #define CONFIG_CHIP_SELECTS_PER_CTRL 1 159 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000003F 160 #define CONFIG_SYS_DDR_CS0_CONFIG_1333 0x80004302 161 #define CONFIG_SYS_DDR_CS0_CONFIG_800 0x80014302 162 #define CONFIG_SYS_DDR_CS0_CONFIG_2 0x00000000 163 #define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef 164 #define CONFIG_SYS_DDR_INIT_ADDR 0x00000000 165 #define CONFIG_SYS_DDR_INIT_EXT_ADDR 0x00000000 166 #define CONFIG_SYS_DDR_MODE_CONTROL 0x00000000 167 #define CONFIG_SYS_DDR1_CS0_BNDS 0x0040007F 168 169 #define CONFIG_SYS_DDR_ZQ_CONTROL 0x89080600 170 #define CONFIG_SYS_DDR_SR_CNTR 0x00000000 171 #define CONFIG_SYS_DDR_RCW_1 0x00000000 172 #define CONFIG_SYS_DDR_RCW_2 0x00000000 173 #define CONFIG_SYS_DDR_CONTROL_800 0x470C0000 174 #define CONFIG_SYS_DDR_CONTROL_2_800 0x04401050 175 #define CONFIG_SYS_DDR_TIMING_4_800 0x00220001 176 #define CONFIG_SYS_DDR_TIMING_5_800 0x03402400 177 178 #define CONFIG_SYS_DDR_CONTROL_1333 0x470C0008 179 #define CONFIG_SYS_DDR_CONTROL_2_1333 0x24401010 180 #define CONFIG_SYS_DDR_TIMING_4_1333 0x00000001 181 #define CONFIG_SYS_DDR_TIMING_5_1333 0x03401400 182 183 #define CONFIG_SYS_DDR_TIMING_3_800 0x00020000 184 #define CONFIG_SYS_DDR_TIMING_0_800 0x00330004 185 #define CONFIG_SYS_DDR_TIMING_1_800 0x6f6B4846 186 #define CONFIG_SYS_DDR_TIMING_2_800 0x0FA8C8CF 187 #define CONFIG_SYS_DDR_CLK_CTRL_800 0x03000000 188 #define CONFIG_SYS_DDR_MODE_1_800 0x40461520 189 #define CONFIG_SYS_DDR_MODE_2_800 0x8000c000 190 #define CONFIG_SYS_DDR_INTERVAL_800 0x0C300000 191 #define CONFIG_SYS_DDR_WRLVL_CONTROL_800 0x8655A608 192 193 #define CONFIG_SYS_DDR_TIMING_3_1333 0x01061000 194 #define CONFIG_SYS_DDR_TIMING_0_1333 0x00440104 195 #define CONFIG_SYS_DDR_TIMING_1_1333 0x98913A45 196 #define CONFIG_SYS_DDR_TIMING_2_1333 0x0FB8B114 197 #define CONFIG_SYS_DDR_CLK_CTRL_1333 0x02800000 198 #define CONFIG_SYS_DDR_MODE_1_1333 0x00061A50 199 #define CONFIG_SYS_DDR_MODE_2_1333 0x00100000 200 #define CONFIG_SYS_DDR_INTERVAL_1333 0x144E0513 201 #define CONFIG_SYS_DDR_WRLVL_CONTROL_1333 0x8655F607 202 203 /*FIXME: the following params are constant w.r.t diff freq 204 combinations. this should be removed later 205 */ 206 #if CONFIG_DDR_CLK_FREQ == 100000000 207 #define CONFIG_SYS_DDR_CS0_CONFIG CONFIG_SYS_DDR_CS0_CONFIG_800 208 #define CONFIG_SYS_DDR_CONTROL CONFIG_SYS_DDR_CONTROL_800 209 #define CONFIG_SYS_DDR_CONTROL_2 CONFIG_SYS_DDR_CONTROL_2_800 210 #define CONFIG_SYS_DDR_TIMING_4 CONFIG_SYS_DDR_TIMING_4_800 211 #define CONFIG_SYS_DDR_TIMING_5 CONFIG_SYS_DDR_TIMING_5_800 212 #elif CONFIG_DDR_CLK_FREQ == 133000000 213 #define CONFIG_SYS_DDR_CS0_CONFIG CONFIG_SYS_DDR_CS0_CONFIG_1333 214 #define CONFIG_SYS_DDR_CONTROL CONFIG_SYS_DDR_CONTROL_1333 215 #define CONFIG_SYS_DDR_CONTROL_2 CONFIG_SYS_DDR_CONTROL_2_1333 216 #define CONFIG_SYS_DDR_TIMING_4 CONFIG_SYS_DDR_TIMING_4_1333 217 #define CONFIG_SYS_DDR_TIMING_5 CONFIG_SYS_DDR_TIMING_5_1333 218 #else 219 #define CONFIG_SYS_DDR_CS0_CONFIG CONFIG_SYS_DDR_CS0_CONFIG_800 220 #define CONFIG_SYS_DDR_CONTROL CONFIG_SYS_DDR_CONTROL_800 221 #define CONFIG_SYS_DDR_CONTROL_2 CONFIG_SYS_DDR_CONTROL_2_800 222 #define CONFIG_SYS_DDR_TIMING_4 CONFIG_SYS_DDR_TIMING_4_800 223 #define CONFIG_SYS_DDR_TIMING_5 CONFIG_SYS_DDR_TIMING_5_800 224 #endif 225 226 227 /* relocated CCSRBAR */ 228 #define CONFIG_SYS_CCSRBAR CONFIG_SYS_CCSRBAR_DEFAULT 229 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR_DEFAULT 230 231 #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR 232 233 /* DSP CCSRBAR */ 234 #define CONFIG_SYS_FSL_DSP_CCSRBAR CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT 235 #define CONFIG_SYS_FSL_DSP_CCSRBAR_PHYS CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT 236 237 /* 238 * IFC Definitions 239 */ 240 /* NOR Flash on IFC */ 241 242 #ifdef CONFIG_SPL_BUILD 243 #define CONFIG_SYS_NO_FLASH 244 #endif 245 #define CONFIG_SYS_FLASH_BASE 0x88000000 246 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* Max number of sector: 32M */ 247 248 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 249 250 #define CONFIG_SYS_NOR_CSPR 0x88000101 251 #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) 252 #define CONFIG_SYS_NOR_CSOR CSOR_NOR_ADM_SHIFT(5) 253 /* NOR Flash Timing Params */ 254 255 #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x01) \ 256 | FTIM0_NOR_TEADC(0x03) \ 257 | FTIM0_NOR_TAVDS(0x00) \ 258 | FTIM0_NOR_TEAHC(0x0f)) 259 #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x1d) \ 260 | FTIM1_NOR_TRAD_NOR(0x09) \ 261 | FTIM1_NOR_TSEQRAD_NOR(0x09)) 262 #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x1) \ 263 | FTIM2_NOR_TCH(0x4) \ 264 | FTIM2_NOR_TWPH(0x7) \ 265 | FTIM2_NOR_TWP(0x1e)) 266 #define CONFIG_SYS_NOR_FTIM3 0x0 267 268 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} 269 #define CONFIG_SYS_FLASH_QUIET_TEST 270 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 271 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ 272 273 #undef CONFIG_SYS_FLASH_CHECKSUM 274 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 275 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 276 277 /* CFI for NOR Flash */ 278 #define CONFIG_FLASH_CFI_DRIVER 279 #define CONFIG_SYS_FLASH_CFI 280 #define CONFIG_SYS_FLASH_EMPTY_INFO 281 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 282 283 /* NAND Flash on IFC */ 284 #define CONFIG_SYS_NAND_BASE 0xff800000 285 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE 286 287 #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 288 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ 289 | CSPR_MSEL_NAND /* MSEL = NAND */ \ 290 | CSPR_V) 291 #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) 292 293 #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ 294 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ 295 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ 296 | CSOR_NAND_RAL_2 /* RAL = 2Byes */ \ 297 | CSOR_NAND_PGS_2K /* Page Size = 2K */ \ 298 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \ 299 | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ 300 301 /* NAND Flash Timing Params */ 302 #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x03) \ 303 | FTIM0_NAND_TWP(0x05) \ 304 | FTIM0_NAND_TWCHT(0x02) \ 305 | FTIM0_NAND_TWH(0x04)) 306 #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x1c) \ 307 | FTIM1_NAND_TWBE(0x1e) \ 308 | FTIM1_NAND_TRR(0x07) \ 309 | FTIM1_NAND_TRP(0x05)) 310 #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x08) \ 311 | FTIM2_NAND_TREH(0x04) \ 312 | FTIM2_NAND_TWHRE(0x11)) 313 #define CONFIG_SYS_NAND_FTIM3 FTIM3_NAND_TWW(0x04) 314 315 #define CONFIG_SYS_NAND_DDR_LAW 11 316 317 /* NAND */ 318 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } 319 #define CONFIG_SYS_MAX_NAND_DEVICE 1 320 #define CONFIG_CMD_NAND 321 322 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 323 324 #ifndef CONFIG_SPL_BUILD 325 #define CONFIG_FSL_QIXIS 326 #endif 327 #ifdef CONFIG_FSL_QIXIS 328 #define CONFIG_SYS_FPGA_BASE 0xffb00000 329 #define CONFIG_SYS_I2C_FPGA_ADDR 0x66 330 #define QIXIS_BASE CONFIG_SYS_FPGA_BASE 331 #define QIXIS_LBMAP_SWITCH 9 332 #define QIXIS_LBMAP_MASK 0x07 333 #define QIXIS_LBMAP_SHIFT 0 334 #define QIXIS_LBMAP_DFLTBANK 0x00 335 #define QIXIS_LBMAP_ALTBANK 0x04 336 #define QIXIS_RST_CTL_RESET 0x83 337 #define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 338 #define QIXIS_RCFG_CTL_RECONFIG_START 0x21 339 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 340 341 #define CONFIG_SYS_FPGA_BASE_PHYS CONFIG_SYS_FPGA_BASE 342 343 #define CONFIG_SYS_CSPR2 (CSPR_PHYS_ADDR(CONFIG_SYS_FPGA_BASE) \ 344 | CSPR_PORT_SIZE_8 \ 345 | CSPR_MSEL_GPCM \ 346 | CSPR_V) 347 #define CONFIG_SYS_AMASK2 IFC_AMASK(64*1024) 348 #define CONFIG_SYS_CSOR2 0x0 349 /* CPLD Timing parameters for IFC CS3 */ 350 #define CONFIG_SYS_CS2_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ 351 FTIM0_GPCM_TEADC(0x0e) | \ 352 FTIM0_GPCM_TEAHC(0x0e)) 353 #define CONFIG_SYS_CS2_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ 354 FTIM1_GPCM_TRAD(0x1f)) 355 #define CONFIG_SYS_CS2_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ 356 FTIM2_GPCM_TCH(0x8) | \ 357 FTIM2_GPCM_TWP(0x1f)) 358 #define CONFIG_SYS_CS2_FTIM3 0x0 359 #endif 360 361 /* Set up IFC registers for boot location NOR/NAND */ 362 #if defined(CONFIG_NAND) || defined(CONFIG_NAND_SECBOOT) 363 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR 364 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK 365 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR 366 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 367 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 368 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 369 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 370 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR_CSPR 371 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK 372 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR 373 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 374 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 375 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 376 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 377 #else 378 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR_CSPR 379 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK 380 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR 381 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 382 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 383 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 384 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 385 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR 386 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK 387 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR 388 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0 389 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1 390 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2 391 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3 392 #endif 393 394 #define CONFIG_BOARD_EARLY_INIT_F /* Call board_pre_init */ 395 #define CONFIG_BOARD_EARLY_INIT_R 396 397 #define CONFIG_SYS_INIT_RAM_LOCK 398 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */ 399 #define CONFIG_SYS_INIT_RAM_END 0x00004000 /* End of used area in RAM */ 400 401 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END \ 402 - GENERATED_GBL_DATA_SIZE) 403 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 404 405 #define CONFIG_SYS_MONITOR_LEN (768 * 1024) 406 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc*/ 407 408 /* Serial Port */ 409 #define CONFIG_CONS_INDEX 1 410 #undef CONFIG_SERIAL_SOFTWARE_FIFO 411 #define CONFIG_SYS_NS16550_SERIAL 412 #define CONFIG_SYS_NS16550_REG_SIZE 1 413 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 414 #ifdef CONFIG_SPL_BUILD 415 #define CONFIG_NS16550_MIN_FUNCTIONS 416 #endif 417 418 #define CONFIG_SYS_CONSOLE_IS_IN_ENV /* determine from environment */ 419 420 #define CONFIG_SYS_BAUDRATE_TABLE \ 421 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 422 423 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR + 0x4500) 424 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR + 0x4600) 425 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR + 0x4700) 426 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR + 0x4800) 427 428 /* Use the HUSH parser */ 429 #define CONFIG_SYS_HUSH_PARSER /* hush parser */ 430 #ifdef CONFIG_SYS_HUSH_PARSER 431 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 432 #endif 433 434 #define CONFIG_SYS_I2C 435 #define CONFIG_SYS_I2C_FSL 436 #define CONFIG_SYS_FSL_I2C_SPEED 400800 /* I2C speed and slave address*/ 437 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 438 #define CONFIG_SYS_FSL_I2C2_SPEED 400800 /* I2C speed and slave address*/ 439 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 440 #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 441 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 442 443 /* I2C EEPROM */ 444 #define CONFIG_ID_EEPROM 445 #ifdef CONFIG_ID_EEPROM 446 #define CONFIG_SYS_I2C_EEPROM_NXID 447 #endif 448 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 449 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 450 #define CONFIG_SYS_EEPROM_BUS_NUM 0 451 452 /* enable read and write access to EEPROM */ 453 #define CONFIG_CMD_EEPROM 454 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 455 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 456 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 457 458 /* I2C FPGA */ 459 #define CONFIG_I2C_FPGA 460 #define CONFIG_SYS_I2C_FPGA_ADDR 0x66 461 462 #define CONFIG_RTC_DS3231 463 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 464 465 /* 466 * SPI interface will not be available in case of NAND boot SPI CS0 will be 467 * used for SLIC 468 */ 469 /* eSPI - Enhanced SPI */ 470 #ifdef CONFIG_FSL_ESPI 471 #define CONFIG_CMD_SF 472 #define CONFIG_SF_DEFAULT_SPEED 10000000 473 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 474 #endif 475 476 #if defined(CONFIG_TSEC_ENET) 477 478 #define CONFIG_MII /* MII PHY management */ 479 #define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */ 480 #define CONFIG_TSEC1 1 481 #define CONFIG_TSEC1_NAME "eTSEC1" 482 #define CONFIG_TSEC2 1 483 #define CONFIG_TSEC2_NAME "eTSEC2" 484 485 #define TSEC1_PHY_ADDR 0 486 #define TSEC2_PHY_ADDR 1 487 488 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 489 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 490 491 #define TSEC1_PHYIDX 0 492 #define TSEC2_PHYIDX 0 493 494 #define CONFIG_ETHPRIME "eTSEC1" 495 496 #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ 497 498 /* TBI PHY configuration for SGMII mode */ 499 #define CONFIG_TSEC_TBICR_SETTINGS ( \ 500 TBICR_PHY_RESET \ 501 | TBICR_ANEG_ENABLE \ 502 | TBICR_FULL_DUPLEX \ 503 | TBICR_SPEED1_SET \ 504 ) 505 506 #endif /* CONFIG_TSEC_ENET */ 507 508 #define CONFIG_MMC 509 #ifdef CONFIG_MMC 510 #define CONFIG_CMD_MMC 511 #define CONFIG_DOS_PARTITION 512 #define CONFIG_FSL_ESDHC 513 #define CONFIG_GENERIC_MMC 514 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 515 #endif 516 517 #define CONFIG_USB_EHCI /* USB */ 518 #ifdef CONFIG_USB_EHCI 519 #define CONFIG_CMD_USB 520 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 521 #define CONFIG_USB_EHCI_FSL 522 #define CONFIG_USB_STORAGE 523 #define CONFIG_HAS_FSL_DR_USB 524 #endif 525 526 /* 527 * Environment 528 */ 529 #if defined(CONFIG_RAMBOOT_SDCARD) 530 #define CONFIG_ENV_IS_IN_MMC 531 #define CONFIG_FSL_FIXED_MMC_LOCATION 532 #define CONFIG_SYS_MMC_ENV_DEV 0 533 #define CONFIG_ENV_SIZE 0x2000 534 #elif defined(CONFIG_RAMBOOT_SPIFLASH) 535 #define CONFIG_ENV_IS_IN_SPI_FLASH 536 #define CONFIG_ENV_SPI_BUS 0 537 #define CONFIG_ENV_SPI_CS 0 538 #define CONFIG_ENV_SPI_MAX_HZ 10000000 539 #define CONFIG_ENV_SPI_MODE 0 540 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 541 #define CONFIG_ENV_SECT_SIZE 0x10000 542 #define CONFIG_ENV_SIZE 0x2000 543 #elif defined(CONFIG_NAND) || defined(CONFIG_NAND_SECBOOT) 544 #define CONFIG_ENV_IS_IN_NAND 545 #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE 546 #define CONFIG_ENV_OFFSET ((768 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE) 547 #define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE) 548 #elif defined(CONFIG_SYS_RAMBOOT) 549 #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ 550 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) 551 #define CONFIG_ENV_SIZE 0x2000 552 #else 553 #define CONFIG_ENV_IS_IN_FLASH 554 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 555 #define CONFIG_ENV_SIZE 0x2000 556 #define CONFIG_ENV_SECT_SIZE 0x20000 557 #endif 558 559 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 560 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 561 562 /* 563 * Command line configuration. 564 */ 565 #define CONFIG_CMD_DATE 566 #define CONFIG_CMD_DHCP 567 #define CONFIG_CMD_ERRATA 568 #define CONFIG_CMD_I2C 569 #define CONFIG_CMD_IRQ 570 #define CONFIG_CMD_MII 571 #define CONFIG_CMD_PING 572 #define CONFIG_CMD_REGINFO 573 574 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) 575 #define CONFIG_CMD_EXT2 576 #define CONFIG_CMD_FAT 577 #define CONFIG_DOS_PARTITION 578 #endif 579 580 /* Hash command with SHA acceleration supported in hardware */ 581 #ifdef CONFIG_FSL_CAAM 582 #define CONFIG_CMD_HASH 583 #define CONFIG_SHA_HW_ACCEL 584 #endif 585 586 /* 587 * Miscellaneous configurable options 588 */ 589 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 590 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 591 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 592 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 593 594 #if defined(CONFIG_CMD_KGDB) 595 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 596 #else 597 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 598 #endif 599 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) 600 /* Print Buffer Size */ 601 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 602 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ 603 604 605 /* 606 * For booting Linux, the board info and command line data 607 * have to be in the first 64 MB of memory, since this is 608 * the maximum mapped by the Linux kernel during initialization. 609 */ 610 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux */ 611 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 612 613 #if defined(CONFIG_CMD_KGDB) 614 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 615 #endif 616 617 /* 618 * Dynamic MTD Partition support with mtdparts 619 */ 620 #ifndef CONFIG_SYS_NO_FLASH 621 #define CONFIG_MTD_DEVICE 622 #define CONFIG_MTD_PARTITIONS 623 #define CONFIG_CMD_MTDPARTS 624 #define CONFIG_FLASH_CFI_MTD 625 #define MTDIDS_DEFAULT "nor0=88000000.nor,nand0=ff800000.flash," 626 #define MTDPARTS_DEFAULT "mtdparts=88000000.nor:256k(dtb),7m(kernel)," \ 627 "55m(fs),1m(uboot);ff800000.flash:1m(uboot)," \ 628 "8m(kernel),512k(dtb),-(fs)" 629 #endif 630 /* 631 * Override partitions in device tree using info 632 * in "mtdparts" environment variable 633 */ 634 #ifdef CONFIG_CMD_MTDPARTS 635 #define CONFIG_FDT_FIXUP_PARTITIONS 636 #endif 637 638 /* 639 * Environment Configuration 640 */ 641 642 #if defined(CONFIG_TSEC_ENET) 643 #define CONFIG_HAS_ETH0 644 #define CONFIG_HAS_ETH1 645 #endif 646 647 #define CONFIG_HOSTNAME BSC9132qds 648 #define CONFIG_ROOTPATH "/opt/nfsroot" 649 #define CONFIG_BOOTFILE "uImage" 650 #define CONFIG_UBOOTPATH "u-boot.bin" 651 652 #define CONFIG_BAUDRATE 115200 653 #define CONFIG_BOOTDELAY 10 /* -1 disable auto-boot */ 654 655 #ifdef CONFIG_SDCARD 656 #define CONFIG_DEF_HWCONFIG "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0" 657 #else 658 #define CONFIG_DEF_HWCONFIG "hwconfig=sim;usb1:dr_mode=host,phy_type=ulpi\0" 659 #endif 660 661 #define CONFIG_EXTRA_ENV_SETTINGS \ 662 "netdev=eth0\0" \ 663 "uboot=" CONFIG_UBOOTPATH "\0" \ 664 "loadaddr=1000000\0" \ 665 "bootfile=uImage\0" \ 666 "consoledev=ttyS0\0" \ 667 "ramdiskaddr=2000000\0" \ 668 "ramdiskfile=rootfs.ext2.gz.uboot\0" \ 669 "fdtaddr=c00000\0" \ 670 "fdtfile=bsc9132qds.dtb\0" \ 671 "bdev=sda1\0" \ 672 CONFIG_DEF_HWCONFIG\ 673 "othbootargs=mem=880M ramdisk_size=600000 " \ 674 "default_hugepagesz=256m hugepagesz=256m hugepages=1 " \ 675 "isolcpus=0\0" \ 676 "usbext2boot=setenv bootargs root=/dev/ram rw " \ 677 "console=$consoledev,$baudrate $othbootargs; " \ 678 "usb start;" \ 679 "ext2load usb 0:4 $loadaddr $bootfile;" \ 680 "ext2load usb 0:4 $fdtaddr $fdtfile;" \ 681 "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \ 682 "bootm $loadaddr $ramdiskaddr $fdtaddr\0" \ 683 "debug_halt_off=mw ff7e0e30 0xf0000000;" 684 685 #define CONFIG_NFSBOOTCOMMAND \ 686 "setenv bootargs root=/dev/nfs rw " \ 687 "nfsroot=$serverip:$rootpath " \ 688 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 689 "console=$consoledev,$baudrate $othbootargs;" \ 690 "tftp $loadaddr $bootfile;" \ 691 "tftp $fdtaddr $fdtfile;" \ 692 "bootm $loadaddr - $fdtaddr" 693 694 #define CONFIG_HDBOOT \ 695 "setenv bootargs root=/dev/$bdev rw rootdelay=30 " \ 696 "console=$consoledev,$baudrate $othbootargs;" \ 697 "usb start;" \ 698 "ext2load usb 0:1 $loadaddr /boot/$bootfile;" \ 699 "ext2load usb 0:1 $fdtaddr /boot/$fdtfile;" \ 700 "bootm $loadaddr - $fdtaddr" 701 702 #define CONFIG_RAMBOOTCOMMAND \ 703 "setenv bootargs root=/dev/ram rw " \ 704 "console=$consoledev,$baudrate $othbootargs; " \ 705 "tftp $ramdiskaddr $ramdiskfile;" \ 706 "tftp $loadaddr $bootfile;" \ 707 "tftp $fdtaddr $fdtfile;" \ 708 "bootm $loadaddr $ramdiskaddr $fdtaddr" 709 710 #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND 711 712 #include <asm/fsl_secure_boot.h> 713 714 #endif /* __CONFIG_H */ 715