1 /* 2 * Copyright 2011-2012 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #ifndef __CONFIG_H 8 #define __CONFIG_H 9 10 /* 11 * B4860 QDS board configuration file 12 */ 13 #ifdef CONFIG_RAMBOOT_PBL 14 #define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/b4860qds/b4_pbi.cfg 15 #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/b4860qds/b4_rcw.cfg 16 #ifndef CONFIG_NAND 17 #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE 18 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc 19 #else 20 #define CONFIG_SPL_FLUSH_IMAGE 21 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 22 #define CONFIG_SYS_TEXT_BASE 0x00201000 23 #define CONFIG_SPL_TEXT_BASE 0xFFFD8000 24 #define CONFIG_SPL_PAD_TO 0x40000 25 #define CONFIG_SPL_MAX_SIZE 0x28000 26 #define RESET_VECTOR_OFFSET 0x27FFC 27 #define BOOT_PAGE_OFFSET 0x27000 28 #define CONFIG_SYS_NAND_U_BOOT_SIZE (768 << 10) 29 #define CONFIG_SYS_NAND_U_BOOT_DST 0x00200000 30 #define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 31 #define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) 32 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" 33 #define CONFIG_SPL_NAND_BOOT 34 #ifdef CONFIG_SPL_BUILD 35 #define CONFIG_SPL_SKIP_RELOCATE 36 #define CONFIG_SPL_COMMON_INIT_DDR 37 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE 38 #endif 39 #endif 40 #endif 41 42 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE 43 /* Set 1M boot space */ 44 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000) 45 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \ 46 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR) 47 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc 48 #endif 49 50 /* High Level Configuration Options */ 51 #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ 52 #define CONFIG_MP /* support multiple processors */ 53 54 #ifndef CONFIG_SYS_TEXT_BASE 55 #define CONFIG_SYS_TEXT_BASE 0xeff40000 56 #endif 57 58 #ifndef CONFIG_RESET_VECTOR_ADDRESS 59 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 60 #endif 61 62 #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ 63 #define CONFIG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS 64 #define CONFIG_PCIE1 /* PCIE controller 1 */ 65 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 66 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 67 68 #ifndef CONFIG_ARCH_B4420 69 #define CONFIG_SYS_SRIO 70 #define CONFIG_SRIO1 /* SRIO port 1 */ 71 #define CONFIG_SRIO2 /* SRIO port 2 */ 72 #define CONFIG_SRIO_PCIE_BOOT_MASTER 73 #endif 74 75 /* I2C bus multiplexer */ 76 #define I2C_MUX_PCA_ADDR 0x77 77 78 /* VSC Crossbar switches */ 79 #define CONFIG_VSC_CROSSBAR 80 #define I2C_CH_DEFAULT 0x8 81 #define I2C_CH_VSC3316 0xc 82 #define I2C_CH_VSC3308 0xd 83 84 #define VSC3316_TX_ADDRESS 0x70 85 #define VSC3316_RX_ADDRESS 0x71 86 #define VSC3308_TX_ADDRESS 0x02 87 #define VSC3308_RX_ADDRESS 0x03 88 89 /* IDT clock synthesizers */ 90 #define CONFIG_IDT8T49N222A 91 #define I2C_CH_IDT 0x9 92 93 #define IDT_SERDES1_ADDRESS 0x6E 94 #define IDT_SERDES2_ADDRESS 0x6C 95 96 /* Voltage monitor on channel 2*/ 97 #define I2C_MUX_CH_VOL_MONITOR 0xa 98 #define I2C_VOL_MONITOR_ADDR 0x40 99 #define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2 100 #define I2C_VOL_MONITOR_BUS_V_OVF 0x1 101 #define I2C_VOL_MONITOR_BUS_V_SHIFT 3 102 103 #define CONFIG_ZM7300 104 #define I2C_MUX_CH_DPM 0xa 105 #define I2C_DPM_ADDR 0x28 106 107 #define CONFIG_ENV_OVERWRITE 108 109 #ifndef CONFIG_MTD_NOR_FLASH 110 #else 111 #define CONFIG_FLASH_CFI_DRIVER 112 #define CONFIG_SYS_FLASH_CFI 113 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 114 #endif 115 116 #if defined(CONFIG_SPIFLASH) 117 #define CONFIG_SYS_EXTRA_ENV_RELOC 118 #define CONFIG_ENV_SPI_BUS 0 119 #define CONFIG_ENV_SPI_CS 0 120 #define CONFIG_ENV_SPI_MAX_HZ 10000000 121 #define CONFIG_ENV_SPI_MODE 0 122 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 123 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 124 #define CONFIG_ENV_SECT_SIZE 0x10000 125 #elif defined(CONFIG_SDCARD) 126 #define CONFIG_SYS_EXTRA_ENV_RELOC 127 #define CONFIG_SYS_MMC_ENV_DEV 0 128 #define CONFIG_ENV_SIZE 0x2000 129 #define CONFIG_ENV_OFFSET (512 * 1097) 130 #elif defined(CONFIG_NAND) 131 #define CONFIG_SYS_EXTRA_ENV_RELOC 132 #define CONFIG_ENV_SIZE 0x2000 133 #define CONFIG_ENV_OFFSET (10 * CONFIG_SYS_NAND_BLOCK_SIZE) 134 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) 135 #define CONFIG_ENV_ADDR 0xffe20000 136 #define CONFIG_ENV_SIZE 0x2000 137 #elif defined(CONFIG_ENV_IS_NOWHERE) 138 #define CONFIG_ENV_SIZE 0x2000 139 #else 140 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 141 #define CONFIG_ENV_SIZE 0x2000 142 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 143 #endif 144 145 #ifndef __ASSEMBLY__ 146 unsigned long get_board_sys_clk(void); 147 unsigned long get_board_ddr_clk(void); 148 #endif 149 #define CONFIG_SYS_CLK_FREQ get_board_sys_clk() /* sysclk for MPC85xx */ 150 #define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() 151 152 /* 153 * These can be toggled for performance analysis, otherwise use default. 154 */ 155 #define CONFIG_SYS_CACHE_STASHING 156 #define CONFIG_BTB /* toggle branch predition */ 157 #define CONFIG_DDR_ECC 158 #ifdef CONFIG_DDR_ECC 159 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER 160 #define CONFIG_MEM_INIT_VALUE 0xdeadbeef 161 #endif 162 163 #define CONFIG_ENABLE_36BIT_PHYS 164 165 #ifdef CONFIG_PHYS_64BIT 166 #define CONFIG_ADDR_MAP 167 #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ 168 #endif 169 170 #if 0 171 #define CONFIG_POST CONFIG_SYS_POST_MEMORY /* test POST memory test */ 172 #endif 173 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 174 #define CONFIG_SYS_MEMTEST_END 0x00400000 175 #define CONFIG_SYS_ALT_MEMTEST 176 #define CONFIG_PANIC_HANG /* do not reset board on panic */ 177 178 /* 179 * Config the L3 Cache as L3 SRAM 180 */ 181 #define CONFIG_SYS_INIT_L3_ADDR 0xFFFC0000 182 #define CONFIG_SYS_L3_SIZE 256 << 10 183 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024) 184 #ifdef CONFIG_NAND 185 #define CONFIG_ENV_ADDR (CONFIG_SPL_GD_ADDR + 4 * 1024) 186 #endif 187 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SPL_GD_ADDR + 12 * 1024) 188 #define CONFIG_SPL_RELOC_MALLOC_SIZE (30 << 10) 189 #define CONFIG_SPL_RELOC_STACK (CONFIG_SPL_GD_ADDR + 64 * 1024) 190 #define CONFIG_SPL_RELOC_STACK_SIZE (22 << 10) 191 192 #ifdef CONFIG_PHYS_64BIT 193 #define CONFIG_SYS_DCSRBAR 0xf0000000 194 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull 195 #endif 196 197 /* EEPROM */ 198 #define CONFIG_ID_EEPROM 199 #define CONFIG_SYS_I2C_EEPROM_NXID 200 #define CONFIG_SYS_EEPROM_BUS_NUM 0 201 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 202 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 203 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 204 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 205 206 /* 207 * DDR Setup 208 */ 209 #define CONFIG_VERY_BIG_RAM 210 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 211 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 212 213 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 214 #define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) 215 216 #define CONFIG_DDR_SPD 217 #define CONFIG_SYS_DDR_RAW_TIMING 218 #ifndef CONFIG_SPL_BUILD 219 #define CONFIG_FSL_DDR_INTERACTIVE 220 #endif 221 222 #define CONFIG_SYS_SPD_BUS_NUM 0 223 #define SPD_EEPROM_ADDRESS1 0x51 224 #define SPD_EEPROM_ADDRESS2 0x53 225 226 #define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 227 #define CONFIG_SYS_SDRAM_SIZE 2048 /* for fixed parameter use */ 228 229 /* 230 * IFC Definitions 231 */ 232 #define CONFIG_SYS_FLASH_BASE 0xe0000000 233 #ifdef CONFIG_PHYS_64BIT 234 #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) 235 #else 236 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 237 #endif 238 239 #define CONFIG_SYS_NOR0_CSPR_EXT (0xf) 240 #define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \ 241 + 0x8000000) | \ 242 CSPR_PORT_SIZE_16 | \ 243 CSPR_MSEL_NOR | \ 244 CSPR_V) 245 #define CONFIG_SYS_NOR1_CSPR_EXT (0xf) 246 #define CONFIG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ 247 CSPR_PORT_SIZE_16 | \ 248 CSPR_MSEL_NOR | \ 249 CSPR_V) 250 #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128 * 1024 * 1024) 251 /* NOR Flash Timing Params */ 252 #define CONFIG_SYS_NOR_CSOR CSOR_NOR_ADM_SHIFT(4) 253 #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x01) | \ 254 FTIM0_NOR_TEADC(0x04) | \ 255 FTIM0_NOR_TEAHC(0x20)) 256 #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ 257 FTIM1_NOR_TRAD_NOR(0x1A) |\ 258 FTIM1_NOR_TSEQRAD_NOR(0x13)) 259 #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x01) | \ 260 FTIM2_NOR_TCH(0x0E) | \ 261 FTIM2_NOR_TWPH(0x0E) | \ 262 FTIM2_NOR_TWP(0x1c)) 263 #define CONFIG_SYS_NOR_FTIM3 0x0 264 265 #define CONFIG_SYS_FLASH_QUIET_TEST 266 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 267 268 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ 269 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ 270 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 271 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 272 273 #define CONFIG_SYS_FLASH_EMPTY_INFO 274 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS \ 275 + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} 276 277 #define CONFIG_FSL_QIXIS /* use common QIXIS code */ 278 #define CONFIG_FSL_QIXIS_V2 279 #define QIXIS_BASE 0xffdf0000 280 #ifdef CONFIG_PHYS_64BIT 281 #define QIXIS_BASE_PHYS (0xf00000000ull | QIXIS_BASE) 282 #else 283 #define QIXIS_BASE_PHYS QIXIS_BASE 284 #endif 285 #define QIXIS_LBMAP_SWITCH 0x01 286 #define QIXIS_LBMAP_MASK 0x0f 287 #define QIXIS_LBMAP_SHIFT 0 288 #define QIXIS_LBMAP_DFLTBANK 0x00 289 #define QIXIS_LBMAP_ALTBANK 0x02 290 #define QIXIS_RST_CTL_RESET 0x31 291 #define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 292 #define QIXIS_RCFG_CTL_RECONFIG_START 0x21 293 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 294 295 #define CONFIG_SYS_CSPR3_EXT (0xf) 296 #define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \ 297 | CSPR_PORT_SIZE_8 \ 298 | CSPR_MSEL_GPCM \ 299 | CSPR_V) 300 #define CONFIG_SYS_AMASK3 IFC_AMASK(4 * 1024) 301 #define CONFIG_SYS_CSOR3 0x0 302 /* QIXIS Timing parameters for IFC CS3 */ 303 #define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ 304 FTIM0_GPCM_TEADC(0x0e) | \ 305 FTIM0_GPCM_TEAHC(0x0e)) 306 #define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ 307 FTIM1_GPCM_TRAD(0x1f)) 308 #define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ 309 FTIM2_GPCM_TCH(0x8) | \ 310 FTIM2_GPCM_TWP(0x1f)) 311 #define CONFIG_SYS_CS3_FTIM3 0x0 312 313 /* NAND Flash on IFC */ 314 #define CONFIG_NAND_FSL_IFC 315 #define CONFIG_SYS_NAND_MAX_ECCPOS 256 316 #define CONFIG_SYS_NAND_MAX_OOBFREE 2 317 #define CONFIG_SYS_NAND_BASE 0xff800000 318 #ifdef CONFIG_PHYS_64BIT 319 #define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE) 320 #else 321 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE 322 #endif 323 324 #define CONFIG_SYS_NAND_CSPR_EXT (0xf) 325 #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 326 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ 327 | CSPR_MSEL_NAND /* MSEL = NAND */ \ 328 | CSPR_V) 329 #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64 * 1024) 330 331 #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ 332 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ 333 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ 334 | CSOR_NAND_RAL_3 /* RAL = 2Byes */ \ 335 | CSOR_NAND_PGS_2K /* Page Size = 2K */ \ 336 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \ 337 | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ 338 339 #define CONFIG_SYS_NAND_ONFI_DETECTION 340 341 /* ONFI NAND Flash mode0 Timing Params */ 342 #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ 343 FTIM0_NAND_TWP(0x18) | \ 344 FTIM0_NAND_TWCHT(0x07) | \ 345 FTIM0_NAND_TWH(0x0a)) 346 #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ 347 FTIM1_NAND_TWBE(0x39) | \ 348 FTIM1_NAND_TRR(0x0e) | \ 349 FTIM1_NAND_TRP(0x18)) 350 #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ 351 FTIM2_NAND_TREH(0x0a) | \ 352 FTIM2_NAND_TWHRE(0x1e)) 353 #define CONFIG_SYS_NAND_FTIM3 0x0 354 355 #define CONFIG_SYS_NAND_DDR_LAW 11 356 357 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } 358 #define CONFIG_SYS_MAX_NAND_DEVICE 1 359 360 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 361 362 #if defined(CONFIG_NAND) 363 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT 364 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR 365 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK 366 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR 367 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 368 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 369 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 370 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 371 #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR0_CSPR_EXT 372 #define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR0_CSPR 373 #define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK 374 #define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR 375 #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0 376 #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1 377 #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2 378 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3 379 #else 380 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT 381 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR 382 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK 383 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR 384 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 385 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 386 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 387 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 388 #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NAND_CSPR_EXT 389 #define CONFIG_SYS_CSPR2 CONFIG_SYS_NAND_CSPR 390 #define CONFIG_SYS_AMASK2 CONFIG_SYS_NAND_AMASK 391 #define CONFIG_SYS_CSOR2 CONFIG_SYS_NAND_CSOR 392 #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NAND_FTIM0 393 #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NAND_FTIM1 394 #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2 395 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3 396 #endif 397 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR1_CSPR_EXT 398 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR1_CSPR 399 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK 400 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR 401 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 402 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 403 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 404 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 405 406 #ifdef CONFIG_SPL_BUILD 407 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE 408 #else 409 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 410 #endif 411 412 #if defined(CONFIG_RAMBOOT_PBL) 413 #define CONFIG_SYS_RAMBOOT 414 #endif 415 416 #define CONFIG_BOARD_EARLY_INIT_R 417 #define CONFIG_MISC_INIT_R 418 419 #define CONFIG_HWCONFIG 420 421 /* define to use L1 as initial stack */ 422 #define CONFIG_L1_INIT_RAM 423 #define CONFIG_SYS_INIT_RAM_LOCK 424 #define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ 425 #ifdef CONFIG_PHYS_64BIT 426 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf 427 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000 428 /* The assembler doesn't like typecast */ 429 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ 430 ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ 431 CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) 432 #else 433 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS 0xfe03c000 /* Initial L1 address */ 434 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 435 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS 436 #endif 437 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 438 439 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ 440 GENERATED_GBL_DATA_SIZE) 441 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 442 443 #define CONFIG_SYS_MONITOR_LEN (768 * 1024) 444 #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) 445 446 /* Serial Port - controlled on board with jumper J8 447 * open - index 2 448 * shorted - index 1 449 */ 450 #define CONFIG_CONS_INDEX 1 451 #define CONFIG_SYS_NS16550_SERIAL 452 #define CONFIG_SYS_NS16550_REG_SIZE 1 453 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) 454 455 #define CONFIG_SYS_BAUDRATE_TABLE \ 456 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 457 458 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) 459 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) 460 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) 461 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) 462 463 /* I2C */ 464 #define CONFIG_SYS_I2C 465 #define CONFIG_SYS_I2C_FSL /* Use FSL common I2C driver */ 466 #define CONFIG_SYS_FSL_I2C_SPEED 400000 /* I2C speed in Hz */ 467 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 468 #define CONFIG_SYS_FSL_I2C2_SPEED 400000 /* I2C speed in Hz */ 469 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 470 #define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 471 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x119000 472 473 /* 474 * RTC configuration 475 */ 476 #define RTC 477 #define CONFIG_RTC_DS3231 1 478 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 479 480 /* 481 * RapidIO 482 */ 483 #ifdef CONFIG_SYS_SRIO 484 #ifdef CONFIG_SRIO1 485 #define CONFIG_SYS_SRIO1_MEM_VIRT 0xa0000000 486 #ifdef CONFIG_PHYS_64BIT 487 #define CONFIG_SYS_SRIO1_MEM_PHYS 0xc20000000ull 488 #else 489 #define CONFIG_SYS_SRIO1_MEM_PHYS 0xa0000000 490 #endif 491 #define CONFIG_SYS_SRIO1_MEM_SIZE 0x10000000 /* 256M */ 492 #endif 493 494 #ifdef CONFIG_SRIO2 495 #define CONFIG_SYS_SRIO2_MEM_VIRT 0xb0000000 496 #ifdef CONFIG_PHYS_64BIT 497 #define CONFIG_SYS_SRIO2_MEM_PHYS 0xc30000000ull 498 #else 499 #define CONFIG_SYS_SRIO2_MEM_PHYS 0xb0000000 500 #endif 501 #define CONFIG_SYS_SRIO2_MEM_SIZE 0x10000000 /* 256M */ 502 #endif 503 #endif 504 505 /* 506 * for slave u-boot IMAGE instored in master memory space, 507 * PHYS must be aligned based on the SIZE 508 */ 509 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull 510 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull 511 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000 /* 1M */ 512 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull 513 /* 514 * for slave UCODE and ENV instored in master memory space, 515 * PHYS must be aligned based on the SIZE 516 */ 517 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull 518 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull 519 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */ 520 521 /* slave core release by master*/ 522 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4 523 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */ 524 525 /* 526 * SRIO_PCIE_BOOT - SLAVE 527 */ 528 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE 529 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000 530 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \ 531 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR) 532 #endif 533 534 /* 535 * eSPI - Enhanced SPI 536 */ 537 #define CONFIG_SF_DEFAULT_SPEED 10000000 538 #define CONFIG_SF_DEFAULT_MODE 0 539 540 /* 541 * MAPLE 542 */ 543 #ifdef CONFIG_PHYS_64BIT 544 #define CONFIG_SYS_MAPLE_MEM_PHYS 0xFA0000000ull 545 #else 546 #define CONFIG_SYS_MAPLE_MEM_PHYS 0xA0000000 547 #endif 548 549 /* 550 * General PCI 551 * Memory space is mapped 1-1, but I/O space must start from 0. 552 */ 553 554 /* controller 1, direct to uli, tgtid 3, Base address 20000 */ 555 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 556 #ifdef CONFIG_PHYS_64BIT 557 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 558 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull 559 #else 560 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 561 #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 562 #endif 563 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ 564 #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 565 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 566 #ifdef CONFIG_PHYS_64BIT 567 #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull 568 #else 569 #define CONFIG_SYS_PCIE1_IO_PHYS 0xf8000000 570 #endif 571 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 572 573 /* Qman/Bman */ 574 #ifndef CONFIG_NOBQFMAN 575 #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ 576 #define CONFIG_SYS_BMAN_NUM_PORTALS 25 577 #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 578 #ifdef CONFIG_PHYS_64BIT 579 #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull 580 #else 581 #define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE 582 #endif 583 #define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 584 #define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 585 #define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 586 #define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE 587 #define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 588 #define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ 589 CONFIG_SYS_BMAN_CENA_SIZE) 590 #define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 591 #define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 592 #define CONFIG_SYS_QMAN_NUM_PORTALS 25 593 #define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 594 #ifdef CONFIG_PHYS_64BIT 595 #define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull 596 #else 597 #define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE 598 #endif 599 #define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 600 #define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 601 #define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 602 #define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE 603 #define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 604 #define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ 605 CONFIG_SYS_QMAN_CENA_SIZE) 606 #define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 607 #define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 608 609 #define CONFIG_SYS_DPAA_FMAN 610 611 #define CONFIG_SYS_DPAA_RMAN 612 613 /* Default address of microcode for the Linux Fman driver */ 614 #if defined(CONFIG_SPIFLASH) 615 /* 616 * env is stored at 0x100000, sector size is 0x10000, ucode is stored after 617 * env, so we got 0x110000. 618 */ 619 #define CONFIG_SYS_QE_FW_IN_SPIFLASH 620 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000 621 #elif defined(CONFIG_SDCARD) 622 /* 623 * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is 624 * about 545KB (1089 blocks), Env is stored after the image, and the env size is 625 * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130. 626 */ 627 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC 628 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 1130) 629 #elif defined(CONFIG_NAND) 630 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND 631 #define CONFIG_SYS_FMAN_FW_ADDR (13 * CONFIG_SYS_NAND_BLOCK_SIZE) 632 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) 633 /* 634 * Slave has no ucode locally, it can fetch this from remote. When implementing 635 * in two corenet boards, slave's ucode could be stored in master's memory 636 * space, the address can be mapped from slave TLB->slave LAW-> 637 * slave SRIO or PCIE outbound window->master inbound window-> 638 * master LAW->the ucode address in master's memory space. 639 */ 640 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE 641 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000 642 #else 643 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR 644 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 645 #endif 646 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 647 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) 648 #endif /* CONFIG_NOBQFMAN */ 649 650 #ifdef CONFIG_SYS_DPAA_FMAN 651 #define CONFIG_FMAN_ENET 652 #define CONFIG_PHYLIB_10G 653 #define CONFIG_PHY_VITESSE 654 #define CONFIG_PHY_TERANETICS 655 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C 656 #define SGMII_CARD_PORT2_PHY_ADDR 0x10 657 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E 658 #define SGMII_CARD_PORT4_PHY_ADDR 0x11 659 #endif 660 661 #ifdef CONFIG_PCI 662 #define CONFIG_PCI_INDIRECT_BRIDGE 663 664 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 665 #endif /* CONFIG_PCI */ 666 667 #ifdef CONFIG_FMAN_ENET 668 #define CONFIG_SYS_FM1_ONBOARD_PHY1_ADDR 0x10 669 #define CONFIG_SYS_FM1_ONBOARD_PHY2_ADDR 0x11 670 671 /*B4860 QDS AMC2PEX-2S default PHY_ADDR */ 672 #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 0x7 /*SLOT 1*/ 673 #define CONFIG_SYS_FM1_10GEC2_PHY_ADDR 0x6 /*SLOT 2*/ 674 675 #define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR 0x1c 676 #define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR 0x1d 677 #define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR 0x1e 678 #define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR 0x1f 679 680 #define CONFIG_MII /* MII PHY management */ 681 #define CONFIG_ETHPRIME "FM1@DTSEC1" 682 #endif 683 684 #define CONFIG_SYS_FSL_B4860QDS_XFI_ERR 685 686 /* 687 * Environment 688 */ 689 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 690 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 691 692 /* 693 * USB 694 */ 695 #define CONFIG_HAS_FSL_DR_USB 696 697 #ifdef CONFIG_HAS_FSL_DR_USB 698 #ifdef CONFIG_USB_EHCI_HCD 699 #define CONFIG_USB_EHCI_FSL 700 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 701 #endif 702 #endif 703 704 /* 705 * Miscellaneous configurable options 706 */ 707 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 708 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 709 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 710 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 711 712 /* 713 * For booting Linux, the board info and command line data 714 * have to be in the first 64 MB of memory, since this is 715 * the maximum mapped by the Linux kernel during initialization. 716 */ 717 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ 718 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 719 720 #ifdef CONFIG_CMD_KGDB 721 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 722 #endif 723 724 /* 725 * Environment Configuration 726 */ 727 #define CONFIG_ROOTPATH "/opt/nfsroot" 728 #define CONFIG_BOOTFILE "uImage" 729 #define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server*/ 730 731 /* default location for tftp and bootm */ 732 #define CONFIG_LOADADDR 1000000 733 734 #define __USB_PHY_TYPE ulpi 735 736 #ifdef CONFIG_ARCH_B4860 737 #define HWCONFIG "hwconfig=fsl_ddr:ctlr_intlv=null," \ 738 "bank_intlv=cs0_cs1;" \ 739 "en_cpc:cpc2;" 740 #else 741 #define HWCONFIG "hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=cs0_cs1;" 742 #endif 743 744 #define CONFIG_EXTRA_ENV_SETTINGS \ 745 HWCONFIG \ 746 "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ 747 "netdev=eth0\0" \ 748 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 749 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ 750 "tftpflash=tftpboot $loadaddr $uboot && " \ 751 "protect off $ubootaddr +$filesize && " \ 752 "erase $ubootaddr +$filesize && " \ 753 "cp.b $loadaddr $ubootaddr $filesize && " \ 754 "protect on $ubootaddr +$filesize && " \ 755 "cmp.b $loadaddr $ubootaddr $filesize\0" \ 756 "consoledev=ttyS0\0" \ 757 "ramdiskaddr=2000000\0" \ 758 "ramdiskfile=b4860qds/ramdisk.uboot\0" \ 759 "fdtaddr=1e00000\0" \ 760 "fdtfile=b4860qds/b4860qds.dtb\0" \ 761 "bdev=sda3\0" 762 763 /* For emulation this causes u-boot to jump to the start of the proof point 764 app code automatically */ 765 #define CONFIG_PROOF_POINTS \ 766 "setenv bootargs root=/dev/$bdev rw " \ 767 "console=$consoledev,$baudrate $othbootargs;" \ 768 "cpu 1 release 0x29000000 - - -;" \ 769 "cpu 2 release 0x29000000 - - -;" \ 770 "cpu 3 release 0x29000000 - - -;" \ 771 "cpu 4 release 0x29000000 - - -;" \ 772 "cpu 5 release 0x29000000 - - -;" \ 773 "cpu 6 release 0x29000000 - - -;" \ 774 "cpu 7 release 0x29000000 - - -;" \ 775 "go 0x29000000" 776 777 #define CONFIG_HVBOOT \ 778 "setenv bootargs config-addr=0x60000000; " \ 779 "bootm 0x01000000 - 0x00f00000" 780 781 #define CONFIG_ALU \ 782 "setenv bootargs root=/dev/$bdev rw " \ 783 "console=$consoledev,$baudrate $othbootargs;" \ 784 "cpu 1 release 0x01000000 - - -;" \ 785 "cpu 2 release 0x01000000 - - -;" \ 786 "cpu 3 release 0x01000000 - - -;" \ 787 "cpu 4 release 0x01000000 - - -;" \ 788 "cpu 5 release 0x01000000 - - -;" \ 789 "cpu 6 release 0x01000000 - - -;" \ 790 "cpu 7 release 0x01000000 - - -;" \ 791 "go 0x01000000" 792 793 #define CONFIG_LINUX \ 794 "setenv bootargs root=/dev/ram rw " \ 795 "console=$consoledev,$baudrate $othbootargs;" \ 796 "setenv ramdiskaddr 0x02000000;" \ 797 "setenv fdtaddr 0x01e00000;" \ 798 "setenv loadaddr 0x1000000;" \ 799 "bootm $loadaddr $ramdiskaddr $fdtaddr" 800 801 #define CONFIG_HDBOOT \ 802 "setenv bootargs root=/dev/$bdev rw " \ 803 "console=$consoledev,$baudrate $othbootargs;" \ 804 "tftp $loadaddr $bootfile;" \ 805 "tftp $fdtaddr $fdtfile;" \ 806 "bootm $loadaddr - $fdtaddr" 807 808 #define CONFIG_NFSBOOTCOMMAND \ 809 "setenv bootargs root=/dev/nfs rw " \ 810 "nfsroot=$serverip:$rootpath " \ 811 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 812 "console=$consoledev,$baudrate $othbootargs;" \ 813 "tftp $loadaddr $bootfile;" \ 814 "tftp $fdtaddr $fdtfile;" \ 815 "bootm $loadaddr - $fdtaddr" 816 817 #define CONFIG_RAMBOOTCOMMAND \ 818 "setenv bootargs root=/dev/ram rw " \ 819 "console=$consoledev,$baudrate $othbootargs;" \ 820 "tftp $ramdiskaddr $ramdiskfile;" \ 821 "tftp $loadaddr $bootfile;" \ 822 "tftp $fdtaddr $fdtfile;" \ 823 "bootm $loadaddr $ramdiskaddr $fdtaddr" 824 825 #define CONFIG_BOOTCOMMAND CONFIG_LINUX 826 827 #include <asm/fsl_secure_boot.h> 828 829 #endif /* __CONFIG_H */ 830