1 /* 2 * (C) Copyright 2005, Psyent Corporation <www.psyent.com> 3 * Scott McNutt <smcnutt@psyent.com> 4 * (C) Copyright 2010, Thomas Chou <thomas@wytron.com.tw> 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #ifndef __CONFIG_H 10 #define __CONFIG_H 11 12 /* 13 * BOARD/CPU 14 */ 15 #define CONFIG_DISPLAY_CPUINFO 16 #define CONFIG_DISPLAY_BOARDINFO_LATE 17 18 /* 19 * SERIAL 20 */ 21 #define CONFIG_BAUDRATE 115200 22 #define CONFIG_SYS_CONSOLE_INFO_QUIET /* Suppress console info */ 23 24 /* 25 * CFI Flash 26 */ 27 #define CONFIG_FLASH_CFI_DRIVER 28 #define CONFIG_SYS_CFI_FLASH_STATUS_POLL /* fix amd flash issue */ 29 #define CONFIG_SYS_FLASH_CFI 30 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 31 #define CONFIG_SYS_FLASH_PROTECTION 32 #define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1 33 #define CONFIG_SYS_MAX_FLASH_SECT 512 34 35 /* 36 * NET options 37 */ 38 #define CONFIG_SYS_RX_ETH_BUFFER 0 39 #define CONFIG_CMD_MII 40 #define CONFIG_PHY_GIGE 41 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 42 #define CONFIG_PHY_MARVELL 43 44 /* 45 * BOOTP options 46 */ 47 #define CONFIG_BOOTP_BOOTFILESIZE 48 #define CONFIG_BOOTP_BOOTPATH 49 #define CONFIG_BOOTP_GATEWAY 50 #define CONFIG_BOOTP_HOSTNAME 51 52 /* 53 * FDT options 54 */ 55 #define CONFIG_OF_LIBFDT 56 #define CONFIG_OF_BOARD_SETUP 57 #define CONFIG_LMB 58 59 /* 60 * MEMORY ORGANIZATION 61 * -Monitor at top of sdram. 62 * -The heap is placed below the monitor 63 * -The stack is placed below the heap (&grows down). 64 */ 65 #define CONFIG_SYS_SDRAM_BASE 0xD0000000 66 #define CONFIG_SYS_SDRAM_SIZE 0x08000000 67 #define CONFIG_NR_DRAM_BANKS 1 68 #define CONFIG_MONITOR_IS_IN_RAM 69 #define CONFIG_SYS_MONITOR_LEN 0x80000 /* Reserve 512k */ 70 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_SDRAM_BASE + \ 71 CONFIG_SYS_SDRAM_SIZE - \ 72 CONFIG_SYS_MONITOR_LEN) 73 #define CONFIG_SYS_MALLOC_LEN 0x20000 74 75 /* 76 * ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above 77 * CONFIG_SYS_RESET_ADDR, since we assume the monitor is stored at the 78 * reset address, no? This will keep the environment in user region 79 * of flash. NOTE: the monitor length must be multiple of sector size 80 * (which is common practice). 81 */ 82 #define CONFIG_ENV_IS_IN_FLASH 83 84 #define CONFIG_ENV_SIZE 0x20000 /* 128k, 1 sector */ 85 #define CONFIG_ENV_OVERWRITE /* Serial change Ok */ 86 #define CONFIG_ENV_ADDR (0xe2800000 + CONFIG_SYS_MONITOR_LEN) 87 88 /* 89 * MISC 90 */ 91 #define CONFIG_SYS_LONGHELP /* Provide extended help */ 92 #define CONFIG_SYS_CBSIZE 256 /* Console I/O buf size */ 93 #define CONFIG_SYS_MAXARGS 16 /* Max command args */ 94 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Bootarg buf size */ 95 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 96 sizeof(CONFIG_SYS_PROMPT) + \ 97 16) /* Print buf size */ 98 #define CONFIG_SYS_LOAD_ADDR 0xd4000000 /* Half of RAM */ 99 #define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR 100 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE 101 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MONITOR_BASE - \ 102 CONFIG_ENV_SIZE - \ 103 CONFIG_SYS_MALLOC_LEN - \ 104 0x10000) 105 #define CONFIG_VERSION_VARIABLE 106 #define CONFIG_AUTO_COMPLETE 107 #define CONFIG_CMDLINE_EDITING 108 109 #endif /* __CONFIG_H */ 110