1 /*
2  * (C) Copyright 2005, Psyent Corporation <www.psyent.com>
3  * Scott McNutt <smcnutt@psyent.com>
4  * (C) Copyright 2010, Thomas Chou <thomas@wytron.com.tw>
5  *
6  * SPDX-License-Identifier:	GPL-2.0+
7  */
8 
9 #ifndef __CONFIG_H
10 #define __CONFIG_H
11 
12 /*
13  * BOARD/CPU
14  */
15 #define CONFIG_DISPLAY_BOARDINFO_LATE
16 
17 /*
18  * SERIAL
19  */
20 
21 /*
22  * CFI Flash
23  */
24 #define CONFIG_FLASH_CFI_DRIVER
25 #define CONFIG_SYS_CFI_FLASH_STATUS_POLL /* fix amd flash issue */
26 #define CONFIG_SYS_FLASH_CFI
27 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
28 #define CONFIG_SYS_FLASH_PROTECTION
29 #define CONFIG_SYS_MAX_FLASH_BANKS_DETECT	1
30 #define CONFIG_SYS_MAX_FLASH_SECT	512
31 
32 /*
33  * NET options
34  */
35 #define CONFIG_SYS_RX_ETH_BUFFER	0
36 #define CONFIG_PHY_GIGE
37 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
38 #define CONFIG_PHY_MARVELL
39 
40 /*
41  * BOOTP options
42  */
43 #define CONFIG_BOOTP_BOOTFILESIZE
44 #define CONFIG_BOOTP_BOOTPATH
45 #define CONFIG_BOOTP_GATEWAY
46 #define CONFIG_BOOTP_HOSTNAME
47 
48 /*
49  * FDT options
50  */
51 #define CONFIG_LMB
52 
53 /*
54  * MEMORY ORGANIZATION
55  * -Monitor at top of sdram.
56  * -The heap is placed below the monitor
57  * -The stack is placed below the heap (&grows down).
58  */
59 #define CONFIG_SYS_SDRAM_BASE		0xD0000000
60 #define CONFIG_SYS_SDRAM_SIZE		0x08000000
61 #define CONFIG_NR_DRAM_BANKS		1
62 #define CONFIG_MONITOR_IS_IN_RAM
63 #define CONFIG_SYS_MONITOR_LEN		0x80000	/* Reserve 512k */
64 #define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_SDRAM_BASE + \
65 					 CONFIG_SYS_SDRAM_SIZE - \
66 					 CONFIG_SYS_MONITOR_LEN)
67 #define CONFIG_SYS_MALLOC_LEN		0x20000
68 
69 /*
70  * ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above
71  * CONFIG_SYS_RESET_ADDR, since we assume the monitor is stored at the
72  * reset address, no? This will keep the environment in user region
73  * of flash. NOTE: the monitor length must be multiple of sector size
74  * (which is common practice).
75  */
76 #define CONFIG_ENV_IS_IN_FLASH
77 
78 #define CONFIG_ENV_SIZE			0x20000	/* 128k, 1 sector */
79 #define CONFIG_ENV_OVERWRITE		/* Serial change Ok	*/
80 #define CONFIG_ENV_ADDR			(0xe2800000 + CONFIG_SYS_MONITOR_LEN)
81 
82 /*
83  * MISC
84  */
85 #define CONFIG_SYS_LONGHELP		/* Provide extended help */
86 #define CONFIG_SYS_CBSIZE		256	/* Console I/O buf size */
87 #define CONFIG_SYS_MAXARGS		16	/* Max command args	*/
88 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE /* Bootarg buf size */
89 #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
90 					sizeof(CONFIG_SYS_PROMPT) + \
91 					 16)	/* Print buf size */
92 #define CONFIG_SYS_LOAD_ADDR		0xd4000000	/* Half of RAM */
93 #define CONFIG_LOADADDR			CONFIG_SYS_LOAD_ADDR
94 #define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
95 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MONITOR_BASE - \
96 					 CONFIG_ENV_SIZE - \
97 					 CONFIG_SYS_MALLOC_LEN -	\
98 					 0x10000)
99 #define CONFIG_AUTO_COMPLETE
100 #define CONFIG_CMDLINE_EDITING
101 
102 #endif /* __CONFIG_H */
103