1 /*
2  * (C) Copyright 2005, Psyent Corporation <www.psyent.com>
3  * Scott McNutt <smcnutt@psyent.com>
4  * (C) Copyright 2010, Thomas Chou <thomas@wytron.com.tw>
5  *
6  * SPDX-License-Identifier:	GPL-2.0+
7  */
8 
9 #ifndef __CONFIG_H
10 #define __CONFIG_H
11 
12 /*
13  * BOARD/CPU
14  */
15 #define CONFIG_DISPLAY_CPUINFO
16 #define CONFIG_DISPLAY_BOARDINFO_LATE
17 
18 /*
19  * SERIAL
20  */
21 #define CONFIG_BAUDRATE			115200
22 #define CONFIG_SYS_CONSOLE_INFO_QUIET	/* Suppress console info */
23 
24 /*
25  * CFI Flash
26  */
27 #define CONFIG_FLASH_CFI_DRIVER
28 #define CONFIG_SYS_CFI_FLASH_STATUS_POLL /* fix amd flash issue */
29 #define CONFIG_SYS_FLASH_CFI
30 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
31 #define CONFIG_SYS_FLASH_PROTECTION
32 #define CONFIG_SYS_MAX_FLASH_BANKS_DETECT	1
33 #define CONFIG_SYS_MAX_FLASH_SECT	512
34 
35 /*
36  * NET options
37  */
38 #define CONFIG_SYS_RX_ETH_BUFFER	0
39 #define CONFIG_CMD_MII
40 #define CONFIG_PHY_GIGE
41 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
42 #define CONFIG_PHY_MARVELL
43 
44 /*
45  * BOOTP options
46  */
47 #define CONFIG_BOOTP_BOOTFILESIZE
48 #define CONFIG_BOOTP_BOOTPATH
49 #define CONFIG_BOOTP_GATEWAY
50 #define CONFIG_BOOTP_HOSTNAME
51 
52 /*
53  * FDT options
54  */
55 #define CONFIG_OF_LIBFDT
56 #define CONFIG_OF_BOARD_SETUP
57 #define CONFIG_LMB
58 
59 /*
60  * ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above
61  * CONFIG_SYS_RESET_ADDR, since we assume the monitor is stored at the
62  * reset address, no? This will keep the environment in user region
63  * of flash. NOTE: the monitor length must be multiple of sector size
64  * (which is common practice).
65  */
66 #define CONFIG_ENV_IS_IN_FLASH
67 
68 #define CONFIG_ENV_SIZE			0x20000	/* 128k, 1 sector */
69 #define CONFIG_ENV_OVERWRITE		/* Serial change Ok	*/
70 #define CONFIG_ENV_ADDR			0xe2840000
71 
72 /*
73  * MEMORY ORGANIZATION
74  * -Monitor at top of sdram.
75  * -The heap is placed below the monitor
76  * -The stack is placed below the heap (&grows down).
77  */
78 #define CONFIG_SYS_SDRAM_BASE		0xD0000000
79 #define CONFIG_SYS_SDRAM_SIZE		0x08000000
80 #define CONFIG_NR_DRAM_BANKS		1
81 #define CONFIG_MONITOR_IS_IN_RAM
82 #define CONFIG_SYS_MONITOR_LEN		0x40000	/* Reserve 256k */
83 #define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_SDRAM_BASE + \
84 					 CONFIG_SYS_SDRAM_SIZE - \
85 					 CONFIG_SYS_MONITOR_LEN)
86 #define CONFIG_SYS_MALLOC_LEN		0x20000
87 
88 /*
89  * MISC
90  */
91 #define CONFIG_SYS_LONGHELP		/* Provide extended help */
92 #define CONFIG_SYS_CBSIZE		256	/* Console I/O buf size */
93 #define CONFIG_SYS_MAXARGS		16	/* Max command args	*/
94 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE /* Bootarg buf size */
95 #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
96 					sizeof(CONFIG_SYS_PROMPT) + \
97 					 16)	/* Print buf size */
98 #define CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SDRAM_BASE
99 #define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
100 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MONITOR_BASE - \
101 					 CONFIG_ENV_SIZE - \
102 					 CONFIG_SYS_MALLOC_LEN -	\
103 					 0x10000)
104 #define CONFIG_CMDLINE_EDITING
105 
106 #endif /* __CONFIG_H */
107