1 /*
2  * (C) Copyright 2005, Psyent Corporation <www.psyent.com>
3  * Scott McNutt <smcnutt@psyent.com>
4  * (C) Copyright 2010, Thomas Chou <thomas@wytron.com.tw>
5  *
6  * SPDX-License-Identifier:	GPL-2.0+
7  */
8 
9 #ifndef __CONFIG_H
10 #define __CONFIG_H
11 
12 /*
13  * BOARD/CPU
14  */
15 #define CONFIG_DISPLAY_CPUINFO
16 #define CONFIG_DISPLAY_BOARDINFO_LATE
17 
18 /*
19  * SERIAL
20  */
21 #define CONFIG_BAUDRATE			115200
22 #define CONFIG_SYS_CONSOLE_INFO_QUIET	/* Suppress console info */
23 
24 /*
25  * Flash
26  */
27 #define CONFIG_SYS_MAX_FLASH_BANKS	1
28 #define CONFIG_SYS_MAX_FLASH_SECT	1024
29 #define CONFIG_MTD_DEVICE
30 
31 /*
32  * NET options
33  */
34 #define CONFIG_SYS_RX_ETH_BUFFER	0
35 #define CONFIG_CMD_MII
36 #define CONFIG_PHY_GIGE
37 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
38 #define CONFIG_PHY_MARVELL
39 
40 /*
41  * BOOTP options
42  */
43 #define CONFIG_BOOTP_BOOTFILESIZE
44 #define CONFIG_BOOTP_BOOTPATH
45 #define CONFIG_BOOTP_GATEWAY
46 #define CONFIG_BOOTP_HOSTNAME
47 
48 /*
49  * FDT options
50  */
51 #define CONFIG_OF_LIBFDT
52 #define CONFIG_OF_BOARD_SETUP
53 #define CONFIG_LMB
54 
55 /*
56  * ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above
57  * CONFIG_SYS_RESET_ADDR, since we assume the monitor is stored at the
58  * reset address, no? This will keep the environment in user region
59  * of flash. NOTE: the monitor length must be multiple of sector size
60  * (which is common practice).
61  */
62 #define CONFIG_ENV_IS_IN_FLASH
63 
64 #define CONFIG_ENV_SIZE			0x10000	/* 64k, 1 sector */
65 #define CONFIG_ENV_OVERWRITE		/* Serial change Ok	*/
66 #define CONFIG_ENV_ADDR			0xf4040000
67 
68 /*
69  * MEMORY ORGANIZATION
70  * -Monitor at top of sdram.
71  * -The heap is placed below the monitor
72  * -The stack is placed below the heap (&grows down).
73  */
74 #define CONFIG_SYS_SDRAM_BASE		0xc8000000
75 #define CONFIG_SYS_SDRAM_SIZE		0x08000000
76 #define CONFIG_NR_DRAM_BANKS		1
77 #define CONFIG_MONITOR_IS_IN_RAM
78 #define CONFIG_SYS_MONITOR_LEN		0x40000	/* Reserve 256k */
79 #define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_SDRAM_BASE + \
80 					 CONFIG_SYS_SDRAM_SIZE - \
81 					 CONFIG_SYS_MONITOR_LEN)
82 #define CONFIG_SYS_MALLOC_LEN		0x20000
83 
84 /*
85  * MISC
86  */
87 #define CONFIG_SYS_LONGHELP		/* Provide extended help */
88 #define CONFIG_SYS_CBSIZE		256	/* Console I/O buf size */
89 #define CONFIG_SYS_MAXARGS		16	/* Max command args	*/
90 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE /* Bootarg buf size */
91 #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
92 					sizeof(CONFIG_SYS_PROMPT) + \
93 					 16)	/* Print buf size */
94 #define CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SDRAM_BASE
95 #define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
96 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MONITOR_BASE - \
97 					 CONFIG_ENV_SIZE - \
98 					 CONFIG_SYS_MALLOC_LEN -	\
99 					 0x10000)
100 #define CONFIG_CMDLINE_EDITING
101 #define CONFIG_CMD_GPIO
102 
103 #endif /* __CONFIG_H */
104