xref: /openbmc/u-boot/include/common.h (revision c4f80f50)
1 /*
2  * (C) Copyright 2000-2009
3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4  *
5  * SPDX-License-Identifier:	GPL-2.0+
6  */
7 
8 #ifndef __COMMON_H_
9 #define __COMMON_H_	1
10 
11 #ifndef __ASSEMBLY__		/* put C only stuff in this section */
12 
13 typedef unsigned char		uchar;
14 typedef volatile unsigned long	vu_long;
15 typedef volatile unsigned short vu_short;
16 typedef volatile unsigned char	vu_char;
17 
18 #include <config.h>
19 #include <asm-offsets.h>
20 #include <linux/bitops.h>
21 #include <linux/types.h>
22 #include <linux/string.h>
23 #include <linux/stringify.h>
24 #include <asm/ptrace.h>
25 #include <stdarg.h>
26 #if defined(CONFIG_PCI) && defined(CONFIG_4xx)
27 #include <pci.h>
28 #endif
29 #if defined(CONFIG_8xx)
30 #include <asm/8xx_immap.h>
31 #if defined(CONFIG_MPC852)	|| defined(CONFIG_MPC852T)	|| \
32     defined(CONFIG_MPC859)	|| defined(CONFIG_MPC859T)	|| \
33     defined(CONFIG_MPC859DSL)	|| \
34     defined(CONFIG_MPC866)	|| defined(CONFIG_MPC866T)	|| \
35     defined(CONFIG_MPC866P)
36 # define CONFIG_MPC866_FAMILY 1
37 #elif defined(CONFIG_MPC870) \
38    || defined(CONFIG_MPC875) \
39    || defined(CONFIG_MPC880) \
40    || defined(CONFIG_MPC885)
41 # define CONFIG_MPC885_FAMILY   1
42 #endif
43 #if   defined(CONFIG_MPC860)	   \
44    || defined(CONFIG_MPC860T)	   \
45    || defined(CONFIG_MPC866_FAMILY) \
46    || defined(CONFIG_MPC885_FAMILY)
47 # define CONFIG_MPC86x 1
48 #endif
49 #elif defined(CONFIG_5xx)
50 #include <asm/5xx_immap.h>
51 #elif defined(CONFIG_MPC5xxx)
52 #include <mpc5xxx.h>
53 #elif defined(CONFIG_MPC512X)
54 #include <asm/immap_512x.h>
55 #elif defined(CONFIG_MPC8260)
56 #if   defined(CONFIG_MPC8247) \
57    || defined(CONFIG_MPC8272)
58 #define CONFIG_MPC8272_FAMILY	1
59 #endif
60 #include <asm/immap_8260.h>
61 #endif
62 #ifdef CONFIG_MPC86xx
63 #include <mpc86xx.h>
64 #include <asm/immap_86xx.h>
65 #endif
66 #ifdef CONFIG_MPC85xx
67 #include <mpc85xx.h>
68 #include <asm/immap_85xx.h>
69 #endif
70 #ifdef CONFIG_MPC83xx
71 #include <mpc83xx.h>
72 #include <asm/immap_83xx.h>
73 #endif
74 #ifdef	CONFIG_4xx
75 #include <asm/ppc4xx.h>
76 #endif
77 #ifdef CONFIG_HYMOD
78 #include <board/hymod/hymod.h>
79 #endif
80 #ifdef CONFIG_ARM
81 #define asmlinkage	/* nothing */
82 #endif
83 #ifdef CONFIG_BLACKFIN
84 #include <asm/blackfin.h>
85 #endif
86 #ifdef CONFIG_SOC_DA8XX
87 #include <asm/arch/hardware.h>
88 #endif
89 
90 #include <part.h>
91 #include <flash.h>
92 #include <image.h>
93 
94 #ifdef __LP64__
95 #define CONFIG_SYS_SUPPORT_64BIT_DATA
96 #endif
97 
98 #ifdef DEBUG
99 #define _DEBUG	1
100 #else
101 #define _DEBUG	0
102 #endif
103 
104 /*
105  * Output a debug text when condition "cond" is met. The "cond" should be
106  * computed by a preprocessor in the best case, allowing for the best
107  * optimization.
108  */
109 #define debug_cond(cond, fmt, args...)		\
110 	do {					\
111 		if (cond)			\
112 			printf(fmt, ##args);	\
113 	} while (0)
114 
115 #define debug(fmt, args...)			\
116 	debug_cond(_DEBUG, fmt, ##args)
117 
118 /*
119  * An assertion is run-time check done in debug mode only. If DEBUG is not
120  * defined then it is skipped. If DEBUG is defined and the assertion fails,
121  * then it calls panic*( which may or may not reset/halt U-Boot (see
122  * CONFIG_PANIC_HANG), It is hoped that all failing assertions are found
123  * before release, and after release it is hoped that they don't matter. But
124  * in any case these failing assertions cannot be fixed with a reset (which
125  * may just do the same assertion again).
126  */
127 void __assert_fail(const char *assertion, const char *file, unsigned line,
128 		   const char *function);
129 #define assert(x) \
130 	({ if (!(x) && _DEBUG) \
131 		__assert_fail(#x, __FILE__, __LINE__, __func__); })
132 
133 #define error(fmt, args...) do {					\
134 		printf("ERROR: " fmt "\nat %s:%d/%s()\n",		\
135 			##args, __FILE__, __LINE__, __func__);		\
136 } while (0)
137 
138 #ifndef BUG
139 #define BUG() do { \
140 	printf("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __FUNCTION__); \
141 	panic("BUG!"); \
142 } while (0)
143 #define BUG_ON(condition) do { if (unlikely((condition)!=0)) BUG(); } while(0)
144 #endif /* BUG */
145 
146 /* Force a compilation error if condition is true */
147 #define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)]))
148 
149 typedef void (interrupt_handler_t)(void *);
150 
151 #include <asm/u-boot.h> /* boot information for Linux kernel */
152 #include <asm/global_data.h>	/* global data used for startup functions */
153 
154 /*
155  * enable common handling for all TQM8xxL/M boards:
156  * - CONFIG_TQM8xxM will be defined for all TQM8xxM boards
157  * - CONFIG_TQM8xxL will be defined for all TQM8xxL _and_ TQM8xxM boards
158  *                  and for the TQM885D board
159  */
160 #if defined(CONFIG_TQM823M) || defined(CONFIG_TQM850M) || \
161     defined(CONFIG_TQM855M) || defined(CONFIG_TQM860M) || \
162     defined(CONFIG_TQM862M) || defined(CONFIG_TQM866M)
163 # ifndef CONFIG_TQM8xxM
164 #  define CONFIG_TQM8xxM
165 # endif
166 #endif
167 #if defined(CONFIG_TQM823L) || defined(CONFIG_TQM850L) || \
168     defined(CONFIG_TQM855L) || defined(CONFIG_TQM860L) || \
169     defined(CONFIG_TQM862L) || defined(CONFIG_TQM8xxM) || \
170     defined(CONFIG_TQM885D)
171 # ifndef CONFIG_TQM8xxL
172 #  define CONFIG_TQM8xxL
173 # endif
174 #endif
175 
176 /*
177  * General Purpose Utilities
178  */
179 #define min(X, Y)				\
180 	({ typeof(X) __x = (X);			\
181 		typeof(Y) __y = (Y);		\
182 		(__x < __y) ? __x : __y; })
183 
184 #define max(X, Y)				\
185 	({ typeof(X) __x = (X);			\
186 		typeof(Y) __y = (Y);		\
187 		(__x > __y) ? __x : __y; })
188 
189 #define MIN(x, y)  min(x, y)
190 #define MAX(x, y)  max(x, y)
191 
192 #define min3(X, Y, Z)				\
193 	({ typeof(X) __x = (X);			\
194 		typeof(Y) __y = (Y);		\
195 		typeof(Z) __z = (Z);		\
196 		__x < __y ? (__x < __z ? __x : __z) :	\
197 		(__y < __z ? __y : __z); })
198 
199 #define max3(X, Y, Z)				\
200 	({ typeof(X) __x = (X);			\
201 		typeof(Y) __y = (Y);		\
202 		typeof(Z) __z = (Z);		\
203 		__x > __y ? (__x > __z ? __x : __z) :	\
204 		(__y > __z ? __y : __z); })
205 
206 #define MIN3(x, y, z)  min3(x, y, z)
207 #define MAX3(x, y, z)  max3(x, y, z)
208 
209 /*
210  * Return the absolute value of a number.
211  *
212  * This handles unsigned and signed longs, ints, shorts and chars.  For all
213  * input types abs() returns a signed long.
214  *
215  * For 64-bit types, use abs64()
216  */
217 #define abs(x) ({						\
218 		long ret;					\
219 		if (sizeof(x) == sizeof(long)) {		\
220 			long __x = (x);				\
221 			ret = (__x < 0) ? -__x : __x;		\
222 		} else {					\
223 			int __x = (x);				\
224 			ret = (__x < 0) ? -__x : __x;		\
225 		}						\
226 		ret;						\
227 	})
228 
229 #define abs64(x) ({				\
230 		s64 __x = (x);			\
231 		(__x < 0) ? -__x : __x;		\
232 	})
233 
234 #if defined(CONFIG_ENV_IS_EMBEDDED)
235 #define TOTAL_MALLOC_LEN	CONFIG_SYS_MALLOC_LEN
236 #elif ( ((CONFIG_ENV_ADDR+CONFIG_ENV_SIZE) < CONFIG_SYS_MONITOR_BASE) || \
237 	(CONFIG_ENV_ADDR >= (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)) ) || \
238       defined(CONFIG_ENV_IS_IN_NVRAM)
239 #define	TOTAL_MALLOC_LEN	(CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE)
240 #else
241 #define	TOTAL_MALLOC_LEN	CONFIG_SYS_MALLOC_LEN
242 #endif
243 
244 /**
245  * container_of - cast a member of a structure out to the containing structure
246  * @ptr:	the pointer to the member.
247  * @type:	the type of the container struct this is embedded in.
248  * @member:	the name of the member within the struct.
249  *
250  */
251 #define container_of(ptr, type, member) ({			\
252 	const typeof( ((type *)0)->member ) *__mptr = (ptr);	\
253 	(type *)( (char *)__mptr - offsetof(type,member) );})
254 
255 /*
256  * Function Prototypes
257  */
258 
259 void	hang		(void) __attribute__ ((noreturn));
260 
261 int	timer_init(void);
262 int	cpu_init(void);
263 
264 /* */
265 phys_size_t initdram (int);
266 int	display_options (void);
267 void	print_size(unsigned long long, const char *);
268 int print_buffer(ulong addr, const void *data, uint width, uint count,
269 		 uint linelen);
270 
271 /* common/main.c */
272 void	main_loop	(void);
273 int run_command(const char *cmd, int flag);
274 int run_command_repeatable(const char *cmd, int flag);
275 
276 /**
277  * Run a list of commands separated by ; or even \0
278  *
279  * Note that if 'len' is not -1, then the command does not need to be nul
280  * terminated, Memory will be allocated for the command in that case.
281  *
282  * @param cmd	List of commands to run, each separated bu semicolon
283  * @param len	Length of commands excluding terminator if known (-1 if not)
284  * @param flag	Execution flags (CMD_FLAG_...)
285  * @return 0 on success, or != 0 on error.
286  */
287 int run_command_list(const char *cmd, int len, int flag);
288 extern char console_buffer[];
289 
290 /* arch/$(ARCH)/lib/board.c */
291 void	board_init_f(ulong);
292 void	board_init_r  (gd_t *, ulong) __attribute__ ((noreturn));
293 int	checkboard    (void);
294 int	checkflash    (void);
295 int	checkdram     (void);
296 int	last_stage_init(void);
297 extern ulong monitor_flash_len;
298 int mac_read_from_eeprom(void);
299 extern u8 __dtb_dt_begin[];	/* embedded device tree blob */
300 int set_cpu_clk_info(void);
301 int mdm_init(void);
302 #if defined(CONFIG_DISPLAY_CPUINFO)
303 int print_cpuinfo(void);
304 #else
305 static inline int print_cpuinfo(void)
306 {
307 	return 0;
308 }
309 #endif
310 int update_flash_size(int flash_size);
311 int arch_early_init_r(void);
312 
313 /**
314  * Show the DRAM size in a board-specific way
315  *
316  * This is used by boards to display DRAM information in their own way.
317  *
318  * @param size	Size of DRAM (which should be displayed along with other info)
319  */
320 void board_show_dram(ulong size);
321 
322 /**
323  * arch_fixup_memory_node() - Write arch-specific memory information to fdt
324  *
325  * Defined in arch/$(ARCH)/lib/bootm.c
326  *
327  * @blob:	FDT blob to write to
328  * @return 0 if ok, or -ve FDT_ERR_... on failure
329  */
330 int arch_fixup_memory_node(void *blob);
331 
332 /* common/flash.c */
333 void flash_perror (int);
334 
335 /* common/cmd_source.c */
336 int	source (ulong addr, const char *fit_uname);
337 
338 extern ulong load_addr;		/* Default Load Address */
339 extern ulong save_addr;		/* Default Save Address */
340 extern ulong save_size;		/* Default Save Size */
341 
342 /* common/cmd_doc.c */
343 void	doc_probe(unsigned long physadr);
344 
345 /* common/cmd_net.c */
346 int do_tftpb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
347 
348 /* common/cmd_fat.c */
349 int do_fat_fsload(cmd_tbl_t *, int, int, char * const []);
350 
351 /* common/cmd_ext2.c */
352 int do_ext2load(cmd_tbl_t *, int, int, char * const []);
353 
354 /* common/cmd_nvedit.c */
355 int	env_init     (void);
356 void	env_relocate (void);
357 int	envmatch     (uchar *, int);
358 
359 /* Avoid unfortunate conflict with libc's getenv() */
360 #ifdef CONFIG_SANDBOX
361 #define getenv uboot_getenv
362 #endif
363 char	*getenv	     (const char *);
364 int	getenv_f     (const char *name, char *buf, unsigned len);
365 ulong getenv_ulong(const char *name, int base, ulong default_val);
366 
367 /**
368  * getenv_hex() - Return an environment variable as a hex value
369  *
370  * Decode an environment as a hex number (it may or may not have a 0x
371  * prefix). If the environment variable cannot be found, or does not start
372  * with hex digits, the default value is returned.
373  *
374  * @varname:		Variable to decode
375  * @default_val:	Value to return on error
376  */
377 ulong getenv_hex(const char *varname, ulong default_val);
378 
379 /*
380  * Read an environment variable as a boolean
381  * Return -1 if variable does not exist (default to true)
382  */
383 int getenv_yesno(const char *var);
384 int	saveenv	     (void);
385 int	setenv	     (const char *, const char *);
386 int setenv_ulong(const char *varname, ulong value);
387 int setenv_hex(const char *varname, ulong value);
388 /**
389  * setenv_addr - Set an environment variable to an address in hex
390  *
391  * @varname:	Environment variable to set
392  * @addr:	Value to set it to
393  * @return 0 if ok, 1 on error
394  */
395 static inline int setenv_addr(const char *varname, const void *addr)
396 {
397 	return setenv_hex(varname, (ulong)addr);
398 }
399 
400 #ifdef CONFIG_ARM
401 # include <asm/mach-types.h>
402 # include <asm/setup.h>
403 # include <asm/u-boot-arm.h>	/* ARM version to be fixed! */
404 #endif /* CONFIG_ARM */
405 #ifdef CONFIG_X86		/* x86 version to be fixed! */
406 # include <asm/u-boot-x86.h>
407 #endif /* CONFIG_X86 */
408 #ifdef CONFIG_SANDBOX
409 # include <asm/u-boot-sandbox.h>	/* TODO(sjg) what needs to be fixed? */
410 #endif
411 #ifdef CONFIG_NDS32
412 # include <asm/mach-types.h>
413 # include <asm/setup.h>
414 # include <asm/u-boot-nds32.h>
415 #endif /* CONFIG_NDS32 */
416 #ifdef CONFIG_MIPS
417 # include <asm/u-boot-mips.h>
418 #endif /* CONFIG_MIPS */
419 #ifdef CONFIG_ARC
420 # include <asm/u-boot-arc.h>
421 #endif /* CONFIG_ARC */
422 
423 #ifdef CONFIG_AUTO_COMPLETE
424 int env_complete(char *var, int maxv, char *cmdv[], int maxsz, char *buf);
425 #endif
426 int get_env_id (void);
427 
428 void	pci_init      (void);
429 void	pci_init_board(void);
430 void	pciinfo	      (int, int);
431 
432 #if defined(CONFIG_PCI) && defined(CONFIG_4xx)
433     int	   pci_pre_init	       (struct pci_controller *);
434     int	   is_pci_host	       (struct pci_controller *);
435 #endif
436 
437 #if defined(CONFIG_PCI) && (defined(CONFIG_440) || defined(CONFIG_405EX))
438 #   if defined(CONFIG_SYS_PCI_TARGET_INIT)
439 	void	pci_target_init	     (struct pci_controller *);
440 #   endif
441 #   if defined(CONFIG_SYS_PCI_MASTER_INIT)
442 	void	pci_master_init	     (struct pci_controller *);
443 #   endif
444 #if defined(CONFIG_440SPE) || \
445     defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
446     defined(CONFIG_405EX)
447    void pcie_setup_hoses(int busno);
448 #endif
449 #endif
450 
451 int	misc_init_f   (void);
452 int	misc_init_r   (void);
453 
454 /* common/exports.c */
455 void	jumptable_init(void);
456 
457 /* common/kallsysm.c */
458 const char *symbol_lookup(unsigned long addr, unsigned long *caddr);
459 
460 /* api/api.c */
461 void	api_init (void);
462 
463 /* common/memsize.c */
464 long	get_ram_size  (long *, long);
465 phys_size_t get_effective_memsize(void);
466 
467 /* $(BOARD)/$(BOARD).c */
468 void	reset_phy     (void);
469 void	fdc_hw_init   (void);
470 
471 /* $(BOARD)/eeprom.c */
472 void eeprom_init  (void);
473 #ifndef CONFIG_SPI
474 int  eeprom_probe (unsigned dev_addr, unsigned offset);
475 #endif
476 int  eeprom_read  (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
477 int  eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
478 #ifdef CONFIG_LWMON
479 extern uchar pic_read  (uchar reg);
480 extern void  pic_write (uchar reg, uchar val);
481 #endif
482 
483 /*
484  * Set this up regardless of board
485  * type, to prevent errors.
486  */
487 #if defined(CONFIG_SPI) || !defined(CONFIG_SYS_I2C_EEPROM_ADDR)
488 # define CONFIG_SYS_DEF_EEPROM_ADDR 0
489 #else
490 #if !defined(CONFIG_ENV_EEPROM_IS_ON_I2C)
491 # define CONFIG_SYS_DEF_EEPROM_ADDR CONFIG_SYS_I2C_EEPROM_ADDR
492 #endif
493 #endif /* CONFIG_SPI || !defined(CONFIG_SYS_I2C_EEPROM_ADDR) */
494 
495 #if defined(CONFIG_SPI)
496 extern void spi_init_f (void);
497 extern void spi_init_r (void);
498 extern ssize_t spi_read	 (uchar *, int, uchar *, int);
499 extern ssize_t spi_write (uchar *, int, uchar *, int);
500 #endif
501 
502 void rpxlite_init (void);
503 
504 #ifdef CONFIG_HERMES
505 /* $(BOARD)/hermes.c */
506 void hermes_start_lxt980 (int speed);
507 #endif
508 
509 #ifdef CONFIG_EVB64260
510 void  evb64260_init(void);
511 void  debug_led(int, int);
512 void  display_mem_map(void);
513 void  perform_soft_reset(void);
514 #endif
515 
516 /* $(BOARD)/$(BOARD).c */
517 int board_early_init_f (void);
518 int board_late_init (void);
519 int board_postclk_init (void); /* after clocks/timebase, before env/serial */
520 int board_early_init_r (void);
521 void board_poweroff (void);
522 
523 #if defined(CONFIG_SYS_DRAM_TEST)
524 int testdram(void);
525 #endif /* CONFIG_SYS_DRAM_TEST */
526 
527 /* $(CPU)/start.S */
528 #if defined(CONFIG_5xx) || \
529     defined(CONFIG_8xx)
530 uint	get_immr      (uint);
531 #endif
532 uint	get_pir	      (void);
533 #if defined(CONFIG_MPC5xxx)
534 uint	get_svr       (void);
535 #endif
536 uint	get_pvr	      (void);
537 uint	get_svr	      (void);
538 uint	rd_ic_cst     (void);
539 void	wr_ic_cst     (uint);
540 void	wr_ic_adr     (uint);
541 uint	rd_dc_cst     (void);
542 void	wr_dc_cst     (uint);
543 void	wr_dc_adr     (uint);
544 int	icache_status (void);
545 void	icache_enable (void);
546 void	icache_disable(void);
547 int	dcache_status (void);
548 void	dcache_enable (void);
549 void	dcache_disable(void);
550 void	mmu_disable(void);
551 #if defined(CONFIG_ARM)
552 void	relocate_code(ulong);
553 #else
554 void	relocate_code(ulong, gd_t *, ulong) __attribute__ ((noreturn));
555 #endif
556 ulong	get_endaddr   (void);
557 void	trap_init     (ulong);
558 #if defined (CONFIG_4xx)	|| \
559     defined (CONFIG_MPC5xxx)	|| \
560     defined (CONFIG_74xx_7xx)	|| \
561     defined (CONFIG_74x)	|| \
562     defined (CONFIG_75x)	|| \
563     defined (CONFIG_74xx)	|| \
564     defined (CONFIG_MPC85xx)	|| \
565     defined (CONFIG_MPC86xx)	|| \
566     defined (CONFIG_MPC83xx)
567 unsigned char	in8(unsigned int);
568 void		out8(unsigned int, unsigned char);
569 unsigned short	in16(unsigned int);
570 unsigned short	in16r(unsigned int);
571 void		out16(unsigned int, unsigned short value);
572 void		out16r(unsigned int, unsigned short value);
573 unsigned long	in32(unsigned int);
574 unsigned long	in32r(unsigned int);
575 void		out32(unsigned int, unsigned long value);
576 void		out32r(unsigned int, unsigned long value);
577 void		ppcDcbf(unsigned long value);
578 void		ppcDcbi(unsigned long value);
579 void		ppcSync(void);
580 void		ppcDcbz(unsigned long value);
581 #endif
582 #if defined (CONFIG_MICROBLAZE)
583 unsigned short	in16(unsigned int);
584 void		out16(unsigned int, unsigned short value);
585 #endif
586 
587 #if defined (CONFIG_MPC83xx)
588 void		ppcDWload(unsigned int *addr, unsigned int *ret);
589 void		ppcDWstore(unsigned int *addr, unsigned int *value);
590 void disable_addr_trans(void);
591 void enable_addr_trans(void);
592 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
593 void ddr_enable_ecc(unsigned int dram_size);
594 #endif
595 #endif
596 
597 /*
598  * Return the current value of a monotonically increasing microsecond timer.
599  * Granularity may be larger than 1us if hardware does not support this.
600  */
601 ulong timer_get_us(void);
602 
603 /* $(CPU)/cpu.c */
604 static inline int cpumask_next(int cpu, unsigned int mask)
605 {
606 	for (cpu++; !((1 << cpu) & mask); cpu++)
607 		;
608 
609 	return cpu;
610 }
611 
612 #define for_each_cpu(iter, cpu, num_cpus, mask) \
613 	for (iter = 0, cpu = cpumask_next(-1, mask); \
614 		iter < num_cpus; \
615 		iter++, cpu = cpumask_next(cpu, mask)) \
616 
617 int	cpu_numcores  (void);
618 u32	cpu_mask      (void);
619 int	is_core_valid (unsigned int);
620 int	probecpu      (void);
621 int	checkcpu      (void);
622 int	checkicache   (void);
623 int	checkdcache   (void);
624 void	upmconfig     (unsigned int, unsigned int *, unsigned int);
625 ulong	get_tbclk     (void);
626 void	reset_cpu     (ulong addr);
627 #if defined (CONFIG_OF_LIBFDT) && defined (CONFIG_OF_BOARD_SETUP)
628 void ft_cpu_setup(void *blob, bd_t *bd);
629 #ifdef CONFIG_PCI
630 void ft_pci_setup(void *blob, bd_t *bd);
631 #endif
632 #endif
633 
634 void smp_set_core_boot_addr(unsigned long addr, int corenr);
635 void smp_kick_all_cpus(void);
636 
637 /* $(CPU)/serial.c */
638 int	serial_init   (void);
639 void	serial_setbrg (void);
640 void	serial_putc   (const char);
641 void	serial_putc_raw(const char);
642 void	serial_puts   (const char *);
643 int	serial_getc   (void);
644 int	serial_tstc   (void);
645 
646 void	_serial_setbrg (const int);
647 void	_serial_putc   (const char, const int);
648 void	_serial_putc_raw(const char, const int);
649 void	_serial_puts   (const char *, const int);
650 int	_serial_getc   (const int);
651 int	_serial_tstc   (const int);
652 
653 /* $(CPU)/speed.c */
654 int	get_clocks (void);
655 int	get_clocks_866 (void);
656 int	sdram_adjust_866 (void);
657 int	adjust_sdram_tbs_8xx (void);
658 #if defined(CONFIG_MPC8260)
659 int	prt_8260_clks (void);
660 #elif defined(CONFIG_MPC5xxx)
661 int	prt_mpc5xxx_clks (void);
662 #endif
663 #ifdef CONFIG_4xx
664 ulong	get_OPB_freq (void);
665 ulong	get_PCI_freq (void);
666 #endif
667 #if defined(CONFIG_S3C24X0) || \
668     defined(CONFIG_LH7A40X) || \
669     defined(CONFIG_EP93XX)
670 ulong	get_FCLK (void);
671 ulong	get_HCLK (void);
672 ulong	get_PCLK (void);
673 ulong	get_UCLK (void);
674 #endif
675 #if defined(CONFIG_LH7A40X)
676 ulong	get_PLLCLK (void);
677 #endif
678 #if defined(CONFIG_IMX)
679 ulong get_systemPLLCLK(void);
680 ulong get_FCLK(void);
681 ulong get_HCLK(void);
682 ulong get_BCLK(void);
683 ulong get_PERCLK1(void);
684 ulong get_PERCLK2(void);
685 ulong get_PERCLK3(void);
686 #endif
687 ulong	get_bus_freq  (ulong);
688 int get_serial_clock(void);
689 
690 #if defined(CONFIG_MPC85xx)
691 typedef MPC85xx_SYS_INFO sys_info_t;
692 void	get_sys_info  ( sys_info_t * );
693 #  if defined(CONFIG_OF_LIBFDT)
694 	void ft_fixup_cpu(void *, u64);
695 	void ft_fixup_num_cores(void *);
696 #  endif
697 #endif
698 #if defined(CONFIG_MPC86xx)
699 typedef MPC86xx_SYS_INFO sys_info_t;
700 void   get_sys_info  ( sys_info_t * );
701 static inline ulong get_ddr_freq(ulong dummy)
702 {
703 	return get_bus_freq(dummy);
704 }
705 #else
706 ulong get_ddr_freq(ulong);
707 #endif
708 
709 #if defined(CONFIG_4xx)
710 #  if defined(CONFIG_440)
711 #	if defined(CONFIG_440SPE)
712 	 unsigned long determine_sysper(void);
713 	 unsigned long determine_pci_clock_per(void);
714 #	endif
715 #  endif
716 typedef PPC4xx_SYS_INFO sys_info_t;
717 int	ppc440spe_revB(void);
718 void	get_sys_info  ( sys_info_t * );
719 #endif
720 
721 /* $(CPU)/cpu_init.c */
722 #if defined(CONFIG_8xx) || defined(CONFIG_MPC8260)
723 void	cpu_init_f    (volatile immap_t *immr);
724 #endif
725 #if defined(CONFIG_4xx) || defined(CONFIG_MCF52x2) || defined(CONFIG_MPC86xx)
726 void	cpu_init_f    (void);
727 #endif
728 #ifdef CONFIG_MPC85xx
729 ulong cpu_init_f(void);
730 #endif
731 
732 int	cpu_init_r    (void);
733 #if defined(CONFIG_MPC8260)
734 int	prt_8260_rsr  (void);
735 #elif defined(CONFIG_MPC83xx)
736 int	prt_83xx_rsr  (void);
737 #endif
738 
739 /* $(CPU)/interrupts.c */
740 int	interrupt_init	   (void);
741 void	timer_interrupt	   (struct pt_regs *);
742 void	external_interrupt (struct pt_regs *);
743 void	irq_install_handler(int, interrupt_handler_t *, void *);
744 void	irq_free_handler   (int);
745 void	reset_timer	   (void);
746 ulong	get_timer	   (ulong base);
747 
748 /* Return value of monotonic microsecond timer */
749 unsigned long timer_get_us(void);
750 
751 void	enable_interrupts  (void);
752 int	disable_interrupts (void);
753 
754 /* $(CPU)/.../commproc.c */
755 int	dpram_init (void);
756 uint	dpram_base(void);
757 uint	dpram_base_align(uint align);
758 uint	dpram_alloc(uint size);
759 uint	dpram_alloc_align(uint size,uint align);
760 void	bootcount_store (ulong);
761 ulong	bootcount_load (void);
762 #define BOOTCOUNT_MAGIC		0xB001C041
763 
764 /* $(CPU)/.../<eth> */
765 void mii_init (void);
766 
767 /* $(CPU)/.../lcd.c */
768 ulong	lcd_setmem (ulong);
769 
770 /* $(CPU)/.../video.c */
771 ulong	video_setmem (ulong);
772 
773 /* arch/$(ARCH)/lib/cache.c */
774 void	enable_caches(void);
775 void	flush_cache   (unsigned long, unsigned long);
776 void	flush_dcache_all(void);
777 void	flush_dcache_range(unsigned long start, unsigned long stop);
778 void	invalidate_dcache_range(unsigned long start, unsigned long stop);
779 void	invalidate_dcache_all(void);
780 void	invalidate_icache_all(void);
781 
782 /* arch/$(ARCH)/lib/ticks.S */
783 unsigned long long get_ticks(void);
784 void	wait_ticks    (unsigned long);
785 
786 /* arch/$(ARCH)/lib/time.c */
787 void	__udelay      (unsigned long);
788 ulong	usec2ticks    (unsigned long usec);
789 ulong	ticks2usec    (unsigned long ticks);
790 int	init_timebase (void);
791 
792 /* lib/gunzip.c */
793 int gunzip(void *, int, unsigned char *, unsigned long *);
794 int zunzip(void *dst, int dstlen, unsigned char *src, unsigned long *lenp,
795 						int stoponerr, int offset);
796 
797 /* lib/qsort.c */
798 void qsort(void *base, size_t nmemb, size_t size,
799 	   int(*compar)(const void *, const void *));
800 int strcmp_compar(const void *, const void *);
801 
802 /* lib/time.c */
803 void	udelay        (unsigned long);
804 void mdelay(unsigned long);
805 
806 /* lib/uuid.c */
807 #include <uuid.h>
808 
809 /* lib/vsprintf.c */
810 #include <vsprintf.h>
811 
812 /* lib/strmhz.c */
813 char *	strmhz(char *buf, unsigned long hz);
814 
815 /* lib/crc32.c */
816 #include <u-boot/crc.h>
817 
818 /* lib/rand.c */
819 #define RAND_MAX -1U
820 void srand(unsigned int seed);
821 unsigned int rand(void);
822 unsigned int rand_r(unsigned int *seedp);
823 
824 /* common/console.c */
825 int	console_init_f(void);	/* Before relocation; uses the serial  stuff	*/
826 int	console_init_r(void);	/* After  relocation; uses the console stuff	*/
827 int	console_assign(int file, const char *devname);	/* Assign the console	*/
828 int	ctrlc (void);
829 int	had_ctrlc (void);	/* have we had a Control-C since last clear? */
830 void	clear_ctrlc (void);	/* clear the Control-C condition */
831 int	disable_ctrlc (int);	/* 1 to disable, 0 to enable Control-C detect */
832 int confirm_yesno(void);        /*  1 if input is "y", "Y", "yes" or "YES" */
833 /*
834  * STDIO based functions (can always be used)
835  */
836 /* serial stuff */
837 int	serial_printf (const char *fmt, ...)
838 		__attribute__ ((format (__printf__, 1, 2)));
839 /* stdin */
840 int	getc(void);
841 int	tstc(void);
842 
843 /* stdout */
844 void	putc(const char c);
845 void	puts(const char *s);
846 int	printf(const char *fmt, ...)
847 		__attribute__ ((format (__printf__, 1, 2)));
848 int	vprintf(const char *fmt, va_list args);
849 
850 /* stderr */
851 #define eputc(c)		fputc(stderr, c)
852 #define eputs(s)		fputs(stderr, s)
853 #define eprintf(fmt,args...)	fprintf(stderr,fmt ,##args)
854 
855 /*
856  * FILE based functions (can only be used AFTER relocation!)
857  */
858 #define stdin		0
859 #define stdout		1
860 #define stderr		2
861 #define MAX_FILES	3
862 
863 int	fprintf(int file, const char *fmt, ...)
864 		__attribute__ ((format (__printf__, 2, 3)));
865 void	fputs(int file, const char *s);
866 void	fputc(int file, const char c);
867 int	ftstc(int file);
868 int	fgetc(int file);
869 
870 /* lib/gzip.c */
871 int gzip(void *dst, unsigned long *lenp,
872 		unsigned char *src, unsigned long srclen);
873 int zzip(void *dst, unsigned long *lenp, unsigned char *src,
874 		unsigned long srclen, int stoponerr,
875 		int (*func)(unsigned long, unsigned long));
876 
877 /* lib/net_utils.c */
878 #include <net.h>
879 static inline IPaddr_t getenv_IPaddr(char *var)
880 {
881 	return string_to_ip(getenv(var));
882 }
883 
884 /*
885  * CONSOLE multiplexing.
886  */
887 #ifdef CONFIG_CONSOLE_MUX
888 #include <iomux.h>
889 #endif
890 
891 int	pcmcia_init (void);
892 
893 #ifdef CONFIG_STATUS_LED
894 # include <status_led.h>
895 #endif
896 
897 #include <bootstage.h>
898 
899 #ifdef CONFIG_SHOW_ACTIVITY
900 void show_activity(int arg);
901 #endif
902 
903 /* Multicore arch functions */
904 #ifdef CONFIG_MP
905 int cpu_status(int nr);
906 int cpu_reset(int nr);
907 int cpu_disable(int nr);
908 int cpu_release(int nr, int argc, char * const argv[]);
909 #endif
910 
911 /* Define a null map_sysmem() if the architecture doesn't use it */
912 # ifndef CONFIG_ARCH_MAP_SYSMEM
913 static inline void *map_sysmem(phys_addr_t paddr, unsigned long len)
914 {
915 	return (void *)(uintptr_t)paddr;
916 }
917 
918 static inline void unmap_sysmem(const void *vaddr)
919 {
920 }
921 
922 static inline phys_addr_t map_to_sysmem(const void *ptr)
923 {
924 	return (phys_addr_t)(uintptr_t)ptr;
925 }
926 # endif
927 
928 #endif /* __ASSEMBLY__ */
929 
930 #ifdef CONFIG_PPC
931 /*
932  * Has to be included outside of the #ifndef __ASSEMBLY__ section.
933  * Otherwise might lead to compilation errors in assembler files.
934  */
935 #include <asm/cache.h>
936 #endif
937 
938 /* Put only stuff here that the assembler can digest */
939 
940 #ifdef CONFIG_POST
941 #define CONFIG_HAS_POST
942 #ifndef CONFIG_POST_ALT_LIST
943 #define CONFIG_POST_STD_LIST
944 #endif
945 #endif
946 
947 #ifdef CONFIG_INIT_CRITICAL
948 #error CONFIG_INIT_CRITICAL is deprecated!
949 #error Read section CONFIG_SKIP_LOWLEVEL_INIT in README.
950 #endif
951 
952 #define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
953 
954 #define ROUND(a,b)		(((a) + (b) - 1) & ~((b) - 1))
955 #define DIV_ROUND(n,d)		(((n) + ((d)/2)) / (d))
956 #define DIV_ROUND_UP(n,d)	(((n) + (d) - 1) / (d))
957 #define roundup(x, y)		((((x) + ((y) - 1)) / (y)) * (y))
958 
959 /*
960  * Divide positive or negative dividend by positive divisor and round
961  * to closest integer. Result is undefined for negative divisors and
962  * for negative dividends if the divisor variable type is unsigned.
963  */
964 #define DIV_ROUND_CLOSEST(x, divisor)(			\
965 {							\
966 	typeof(x) __x = x;				\
967 	typeof(divisor) __d = divisor;			\
968 	(((typeof(x))-1) > 0 ||				\
969 	 ((typeof(divisor))-1) > 0 || (__x) > 0) ?	\
970 		(((__x) + ((__d) / 2)) / (__d)) :	\
971 		(((__x) - ((__d) / 2)) / (__d));	\
972 }							\
973 )
974 
975 #define ALIGN(x,a)		__ALIGN_MASK((x),(typeof(x))(a)-1)
976 #define __ALIGN_MASK(x,mask)	(((x)+(mask))&~(mask))
977 
978 /*
979  * ARCH_DMA_MINALIGN is defined in asm/cache.h for each architecture.  It
980  * is used to align DMA buffers.
981  */
982 #ifndef __ASSEMBLY__
983 #include <asm/cache.h>
984 #endif
985 
986 /*
987  * The ALLOC_CACHE_ALIGN_BUFFER macro is used to allocate a buffer on the
988  * stack that meets the minimum architecture alignment requirements for DMA.
989  * Such a buffer is useful for DMA operations where flushing and invalidating
990  * the cache before and after a read and/or write operation is required for
991  * correct operations.
992  *
993  * When called the macro creates an array on the stack that is sized such
994  * that:
995  *
996  * 1) The beginning of the array can be advanced enough to be aligned.
997  *
998  * 2) The size of the aligned portion of the array is a multiple of the minimum
999  *    architecture alignment required for DMA.
1000  *
1001  * 3) The aligned portion contains enough space for the original number of
1002  *    elements requested.
1003  *
1004  * The macro then creates a pointer to the aligned portion of this array and
1005  * assigns to the pointer the address of the first element in the aligned
1006  * portion of the array.
1007  *
1008  * Calling the macro as:
1009  *
1010  *     ALLOC_CACHE_ALIGN_BUFFER(uint32_t, buffer, 1024);
1011  *
1012  * Will result in something similar to saying:
1013  *
1014  *     uint32_t    buffer[1024];
1015  *
1016  * The following differences exist:
1017  *
1018  * 1) The resulting buffer is guaranteed to be aligned to the value of
1019  *    ARCH_DMA_MINALIGN.
1020  *
1021  * 2) The buffer variable created by the macro is a pointer to the specified
1022  *    type, and NOT an array of the specified type.  This can be very important
1023  *    if you want the address of the buffer, which you probably do, to pass it
1024  *    to the DMA hardware.  The value of &buffer is different in the two cases.
1025  *    In the macro case it will be the address of the pointer, not the address
1026  *    of the space reserved for the buffer.  However, in the second case it
1027  *    would be the address of the buffer.  So if you are replacing hard coded
1028  *    stack buffers with this macro you need to make sure you remove the & from
1029  *    the locations where you are taking the address of the buffer.
1030  *
1031  * Note that the size parameter is the number of array elements to allocate,
1032  * not the number of bytes.
1033  *
1034  * This macro can not be used outside of function scope, or for the creation
1035  * of a function scoped static buffer.  It can not be used to create a cache
1036  * line aligned global buffer.
1037  */
1038 #define PAD_COUNT(s, pad) (((s) - 1) / (pad) + 1)
1039 #define PAD_SIZE(s, pad) (PAD_COUNT(s, pad) * pad)
1040 #define ALLOC_ALIGN_BUFFER_PAD(type, name, size, align, pad)		\
1041 	char __##name[ROUND(PAD_SIZE((size) * sizeof(type), pad), align)  \
1042 		      + (align - 1)];					\
1043 									\
1044 	type *name = (type *) ALIGN((uintptr_t)__##name, align)
1045 #define ALLOC_ALIGN_BUFFER(type, name, size, align)		\
1046 	ALLOC_ALIGN_BUFFER_PAD(type, name, size, align, 1)
1047 #define ALLOC_CACHE_ALIGN_BUFFER_PAD(type, name, size, pad)		\
1048 	ALLOC_ALIGN_BUFFER_PAD(type, name, size, ARCH_DMA_MINALIGN, pad)
1049 #define ALLOC_CACHE_ALIGN_BUFFER(type, name, size)			\
1050 	ALLOC_ALIGN_BUFFER(type, name, size, ARCH_DMA_MINALIGN)
1051 
1052 /*
1053  * DEFINE_CACHE_ALIGN_BUFFER() is similar to ALLOC_CACHE_ALIGN_BUFFER, but it's
1054  * purpose is to allow allocating aligned buffers outside of function scope.
1055  * Usage of this macro shall be avoided or used with extreme care!
1056  */
1057 #define DEFINE_ALIGN_BUFFER(type, name, size, align)			\
1058 	static char __##name[roundup(size * sizeof(type), align)]	\
1059 			__aligned(align);				\
1060 									\
1061 	static type *name = (type *)__##name
1062 #define DEFINE_CACHE_ALIGN_BUFFER(type, name, size)			\
1063 	DEFINE_ALIGN_BUFFER(type, name, size, ARCH_DMA_MINALIGN)
1064 
1065 /* Pull in stuff for the build system */
1066 #ifdef DO_DEPS_ONLY
1067 # include <environment.h>
1068 #endif
1069 
1070 #endif	/* __COMMON_H_ */
1071