1 /* 2 * (C) Copyright 2000-2009 3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8 #ifndef __COMMON_H_ 9 #define __COMMON_H_ 1 10 11 #ifndef __ASSEMBLY__ /* put C only stuff in this section */ 12 13 typedef unsigned char uchar; 14 typedef volatile unsigned long vu_long; 15 typedef volatile unsigned short vu_short; 16 typedef volatile unsigned char vu_char; 17 18 #include <config.h> 19 #include <asm-offsets.h> 20 #include <linux/bitops.h> 21 #include <linux/types.h> 22 #include <linux/string.h> 23 #include <linux/stringify.h> 24 #include <asm/ptrace.h> 25 #include <stdarg.h> 26 #include <linux/kernel.h> 27 #if defined(CONFIG_PCI) && defined(CONFIG_4xx) 28 #include <pci.h> 29 #endif 30 #if defined(CONFIG_8xx) 31 #include <asm/8xx_immap.h> 32 #if defined(CONFIG_MPC859) || defined(CONFIG_MPC859T) || \ 33 defined(CONFIG_MPC866) || \ 34 defined(CONFIG_MPC866P) 35 # define CONFIG_MPC866_FAMILY 1 36 #elif defined(CONFIG_MPC885) 37 # define CONFIG_MPC885_FAMILY 1 38 #endif 39 #if defined(CONFIG_MPC860) \ 40 || defined(CONFIG_MPC860T) \ 41 || defined(CONFIG_MPC866_FAMILY) \ 42 || defined(CONFIG_MPC885_FAMILY) 43 # define CONFIG_MPC86x 1 44 #endif 45 #elif defined(CONFIG_5xx) 46 #include <asm/5xx_immap.h> 47 #elif defined(CONFIG_MPC5xxx) 48 #include <mpc5xxx.h> 49 #elif defined(CONFIG_MPC512X) 50 #include <asm/immap_512x.h> 51 #elif defined(CONFIG_MPC8260) 52 #if defined(CONFIG_MPC8247) \ 53 || defined(CONFIG_MPC8272) 54 #define CONFIG_MPC8272_FAMILY 1 55 #endif 56 #include <asm/immap_8260.h> 57 #endif 58 #ifdef CONFIG_MPC86xx 59 #include <mpc86xx.h> 60 #include <asm/immap_86xx.h> 61 #endif 62 #ifdef CONFIG_MPC85xx 63 #include <mpc85xx.h> 64 #include <asm/immap_85xx.h> 65 #endif 66 #ifdef CONFIG_MPC83xx 67 #include <mpc83xx.h> 68 #include <asm/immap_83xx.h> 69 #endif 70 #ifdef CONFIG_4xx 71 #include <asm/ppc4xx.h> 72 #endif 73 #ifdef CONFIG_BLACKFIN 74 #include <asm/blackfin.h> 75 #endif 76 #ifdef CONFIG_SOC_DA8XX 77 #include <asm/arch/hardware.h> 78 #endif 79 80 #include <part.h> 81 #include <flash.h> 82 #include <image.h> 83 84 /* Bring in printf format macros if inttypes.h is included */ 85 #define __STDC_FORMAT_MACROS 86 87 #ifdef __LP64__ 88 #define CONFIG_SYS_SUPPORT_64BIT_DATA 89 #endif 90 91 #ifdef DEBUG 92 #define _DEBUG 1 93 #else 94 #define _DEBUG 0 95 #endif 96 97 #ifndef pr_fmt 98 #define pr_fmt(fmt) fmt 99 #endif 100 101 /* 102 * Output a debug text when condition "cond" is met. The "cond" should be 103 * computed by a preprocessor in the best case, allowing for the best 104 * optimization. 105 */ 106 #define debug_cond(cond, fmt, args...) \ 107 do { \ 108 if (cond) \ 109 printf(pr_fmt(fmt), ##args); \ 110 } while (0) 111 112 #define debug(fmt, args...) \ 113 debug_cond(_DEBUG, fmt, ##args) 114 115 /* 116 * An assertion is run-time check done in debug mode only. If DEBUG is not 117 * defined then it is skipped. If DEBUG is defined and the assertion fails, 118 * then it calls panic*( which may or may not reset/halt U-Boot (see 119 * CONFIG_PANIC_HANG), It is hoped that all failing assertions are found 120 * before release, and after release it is hoped that they don't matter. But 121 * in any case these failing assertions cannot be fixed with a reset (which 122 * may just do the same assertion again). 123 */ 124 void __assert_fail(const char *assertion, const char *file, unsigned line, 125 const char *function); 126 #define assert(x) \ 127 ({ if (!(x) && _DEBUG) \ 128 __assert_fail(#x, __FILE__, __LINE__, __func__); }) 129 130 #define error(fmt, args...) do { \ 131 printf("ERROR: " pr_fmt(fmt) "\nat %s:%d/%s()\n", \ 132 ##args, __FILE__, __LINE__, __func__); \ 133 } while (0) 134 135 #ifndef BUG 136 #define BUG() do { \ 137 printf("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __FUNCTION__); \ 138 panic("BUG!"); \ 139 } while (0) 140 #define BUG_ON(condition) do { if (unlikely((condition)!=0)) BUG(); } while(0) 141 #endif /* BUG */ 142 143 /* Force a compilation error if condition is true */ 144 #define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)])) 145 146 typedef void (interrupt_handler_t)(void *); 147 148 #include <asm/u-boot.h> /* boot information for Linux kernel */ 149 #include <asm/global_data.h> /* global data used for startup functions */ 150 151 /* 152 * enable common handling for all TQM8xxL/M boards: 153 * - CONFIG_TQM8xxM will be defined for all TQM8xxM boards 154 * - CONFIG_TQM8xxL will be defined for all TQM8xxL _and_ TQM8xxM boards 155 * and for the TQM885D board 156 */ 157 #if defined(CONFIG_TQM823M) || defined(CONFIG_TQM850M) || \ 158 defined(CONFIG_TQM855M) || defined(CONFIG_TQM860M) || \ 159 defined(CONFIG_TQM862M) || defined(CONFIG_TQM866M) 160 # ifndef CONFIG_TQM8xxM 161 # define CONFIG_TQM8xxM 162 # endif 163 #endif 164 #if defined(CONFIG_TQM823L) || defined(CONFIG_TQM850L) || \ 165 defined(CONFIG_TQM855L) || defined(CONFIG_TQM860L) || \ 166 defined(CONFIG_TQM862L) || defined(CONFIG_TQM8xxM) || \ 167 defined(CONFIG_TQM885D) 168 # ifndef CONFIG_TQM8xxL 169 # define CONFIG_TQM8xxL 170 # endif 171 #endif 172 173 #if defined(CONFIG_ENV_IS_EMBEDDED) 174 #define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN 175 #elif ( ((CONFIG_ENV_ADDR+CONFIG_ENV_SIZE) < CONFIG_SYS_MONITOR_BASE) || \ 176 (CONFIG_ENV_ADDR >= (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)) ) || \ 177 defined(CONFIG_ENV_IS_IN_NVRAM) 178 #define TOTAL_MALLOC_LEN (CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE) 179 #else 180 #define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN 181 #endif 182 183 /* 184 * Function Prototypes 185 */ 186 int dram_init(void); 187 188 void hang (void) __attribute__ ((noreturn)); 189 190 int timer_init(void); 191 int cpu_init(void); 192 193 /* */ 194 phys_size_t initdram (int); 195 196 #include <display_options.h> 197 198 /* common/main.c */ 199 void main_loop (void); 200 int run_command(const char *cmd, int flag); 201 int run_command_repeatable(const char *cmd, int flag); 202 203 /** 204 * Run a list of commands separated by ; or even \0 205 * 206 * Note that if 'len' is not -1, then the command does not need to be nul 207 * terminated, Memory will be allocated for the command in that case. 208 * 209 * @param cmd List of commands to run, each separated bu semicolon 210 * @param len Length of commands excluding terminator if known (-1 if not) 211 * @param flag Execution flags (CMD_FLAG_...) 212 * @return 0 on success, or != 0 on error. 213 */ 214 int run_command_list(const char *cmd, int len, int flag); 215 extern char console_buffer[]; 216 217 /* arch/$(ARCH)/lib/board.c */ 218 void board_init_f(ulong); 219 void board_init_r(gd_t *, ulong) __attribute__ ((noreturn)); 220 221 /** 222 * board_init_f_mem() - Allocate global data and set stack position 223 * 224 * This function is called by each architecture very early in the start-up 225 * code to set up the environment for board_init_f(). It allocates space for 226 * global_data (see include/asm-generic/global_data.h) and places the stack 227 * below this. 228 * 229 * This function requires a stack[1] Normally this is at @top. The function 230 * starts allocating space from 64 bytes below @top. First it creates space 231 * for global_data. Then it calls arch_setup_gd() which sets gd to point to 232 * the global_data space and can reserve additional bytes of space if 233 * required). Finally it allocates early malloc() memory 234 * (CONFIG_SYS_MALLOC_F_LEN). The new top of the stack is just below this, 235 * and it returned by this function. 236 * 237 * [1] Strictly speaking it would be possible to implement this function 238 * in C on many archs such that it does not require a stack. However this 239 * does not seem hugely important as only 64 byte are wasted. The 64 bytes 240 * are used to handle the calling standard which generally requires pushing 241 * addresses or registers onto the stack. We should be able to get away with 242 * less if this becomes important. 243 * 244 * @top: Top of available memory, also normally the top of the stack 245 * @return: New stack location 246 */ 247 ulong board_init_f_mem(ulong top); 248 249 /** 250 * arch_setup_gd() - Set up the global_data pointer 251 * 252 * This pointer is special in some architectures and cannot easily be assigned 253 * to. For example on x86 it is implemented by adding a specific record to its 254 * Global Descriptor Table! So we we provide a function to carry out this task. 255 * For most architectures this can simply be: 256 * 257 * gd = gd_ptr; 258 * 259 * @gd_ptr: Pointer to global data 260 */ 261 void arch_setup_gd(gd_t *gd_ptr); 262 263 int checkboard(void); 264 int show_board_info(void); 265 int checkflash(void); 266 int checkdram(void); 267 int last_stage_init(void); 268 extern ulong monitor_flash_len; 269 int mac_read_from_eeprom(void); 270 extern u8 __dtb_dt_begin[]; /* embedded device tree blob */ 271 int set_cpu_clk_info(void); 272 int mdm_init(void); 273 #if defined(CONFIG_DISPLAY_CPUINFO) 274 int print_cpuinfo(void); 275 #else 276 static inline int print_cpuinfo(void) 277 { 278 return 0; 279 } 280 #endif 281 int update_flash_size(int flash_size); 282 int arch_early_init_r(void); 283 284 /** 285 * arch_cpu_init_dm() - init CPU after driver model is available 286 * 287 * This is called immediately after driver model is available before 288 * relocation. This is similar to arch_cpu_init() but is able to reference 289 * devices 290 * 291 * @return 0 if OK, -ve on error 292 */ 293 int arch_cpu_init_dm(void); 294 295 /** 296 * Reserve all necessary stacks 297 * 298 * This is used in generic board init sequence in common/board_f.c. Each 299 * architecture could provide this function to tailor the required stacks. 300 * 301 * On entry gd->start_addr_sp is pointing to the suggested top of the stack. 302 * The callee ensures gd->start_add_sp is 16-byte aligned, so architectures 303 * require only this can leave it untouched. 304 * 305 * On exit gd->start_addr_sp and gd->irq_sp should be set to the respective 306 * positions of the stack. The stack pointer(s) will be set to this later. 307 * gd->irq_sp is only required, if the architecture needs it. 308 * 309 * @return 0 if no error 310 */ 311 __weak int arch_reserve_stacks(void); 312 313 /** 314 * Show the DRAM size in a board-specific way 315 * 316 * This is used by boards to display DRAM information in their own way. 317 * 318 * @param size Size of DRAM (which should be displayed along with other info) 319 */ 320 void board_show_dram(phys_size_t size); 321 322 /** 323 * arch_fixup_fdt() - Write arch-specific information to fdt 324 * 325 * Defined in arch/$(ARCH)/lib/bootm-fdt.c 326 * 327 * @blob: FDT blob to write to 328 * @return 0 if ok, or -ve FDT_ERR_... on failure 329 */ 330 int arch_fixup_fdt(void *blob); 331 332 /* common/flash.c */ 333 void flash_perror (int); 334 335 /* common/cmd_source.c */ 336 int source (ulong addr, const char *fit_uname); 337 338 extern ulong load_addr; /* Default Load Address */ 339 extern ulong save_addr; /* Default Save Address */ 340 extern ulong save_size; /* Default Save Size */ 341 342 /* common/cmd_doc.c */ 343 void doc_probe(unsigned long physadr); 344 345 /* common/cmd_net.c */ 346 int do_tftpb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); 347 348 /* common/cmd_fat.c */ 349 int do_fat_fsload(cmd_tbl_t *, int, int, char * const []); 350 351 /* common/cmd_ext2.c */ 352 int do_ext2load(cmd_tbl_t *, int, int, char * const []); 353 354 /* common/cmd_nvedit.c */ 355 int env_init (void); 356 void env_relocate (void); 357 int envmatch (uchar *, int); 358 359 /* Avoid unfortunate conflict with libc's getenv() */ 360 #ifdef CONFIG_SANDBOX 361 #define getenv uboot_getenv 362 #endif 363 char *getenv (const char *); 364 int getenv_f (const char *name, char *buf, unsigned len); 365 ulong getenv_ulong(const char *name, int base, ulong default_val); 366 367 /** 368 * getenv_hex() - Return an environment variable as a hex value 369 * 370 * Decode an environment as a hex number (it may or may not have a 0x 371 * prefix). If the environment variable cannot be found, or does not start 372 * with hex digits, the default value is returned. 373 * 374 * @varname: Variable to decode 375 * @default_val: Value to return on error 376 */ 377 ulong getenv_hex(const char *varname, ulong default_val); 378 379 /* 380 * Read an environment variable as a boolean 381 * Return -1 if variable does not exist (default to true) 382 */ 383 int getenv_yesno(const char *var); 384 int saveenv (void); 385 int setenv (const char *, const char *); 386 int setenv_ulong(const char *varname, ulong value); 387 int setenv_hex(const char *varname, ulong value); 388 /** 389 * setenv_addr - Set an environment variable to an address in hex 390 * 391 * @varname: Environment variable to set 392 * @addr: Value to set it to 393 * @return 0 if ok, 1 on error 394 */ 395 static inline int setenv_addr(const char *varname, const void *addr) 396 { 397 return setenv_hex(varname, (ulong)addr); 398 } 399 400 #ifdef CONFIG_ARM 401 # include <asm/mach-types.h> 402 # include <asm/setup.h> 403 # include <asm/u-boot-arm.h> /* ARM version to be fixed! */ 404 #endif /* CONFIG_ARM */ 405 #ifdef CONFIG_X86 /* x86 version to be fixed! */ 406 # include <asm/u-boot-x86.h> 407 #endif /* CONFIG_X86 */ 408 #ifdef CONFIG_SANDBOX 409 # include <asm/u-boot-sandbox.h> /* TODO(sjg) what needs to be fixed? */ 410 #endif 411 #ifdef CONFIG_NDS32 412 # include <asm/mach-types.h> 413 # include <asm/setup.h> 414 # include <asm/u-boot-nds32.h> 415 #endif /* CONFIG_NDS32 */ 416 #ifdef CONFIG_MIPS 417 # include <asm/u-boot-mips.h> 418 #endif /* CONFIG_MIPS */ 419 #ifdef CONFIG_ARC 420 # include <asm/u-boot-arc.h> 421 #endif /* CONFIG_ARC */ 422 423 #ifdef CONFIG_AUTO_COMPLETE 424 int env_complete(char *var, int maxv, char *cmdv[], int maxsz, char *buf); 425 #endif 426 int get_env_id (void); 427 428 void pci_init (void); 429 void pci_init_board(void); 430 void pciinfo (int, int); 431 432 #if defined(CONFIG_PCI) && defined(CONFIG_4xx) 433 int pci_pre_init (struct pci_controller *); 434 int is_pci_host (struct pci_controller *); 435 #endif 436 437 #if defined(CONFIG_PCI) && (defined(CONFIG_440) || defined(CONFIG_405EX)) 438 # if defined(CONFIG_SYS_PCI_TARGET_INIT) 439 void pci_target_init (struct pci_controller *); 440 # endif 441 # if defined(CONFIG_SYS_PCI_MASTER_INIT) 442 void pci_master_init (struct pci_controller *); 443 # endif 444 #if defined(CONFIG_440SPE) || \ 445 defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ 446 defined(CONFIG_405EX) 447 void pcie_setup_hoses(int busno); 448 #endif 449 #endif 450 451 int misc_init_f (void); 452 int misc_init_r (void); 453 454 /* common/exports.c */ 455 void jumptable_init(void); 456 457 /* common/kallsysm.c */ 458 const char *symbol_lookup(unsigned long addr, unsigned long *caddr); 459 460 /* api/api.c */ 461 void api_init (void); 462 463 /* common/memsize.c */ 464 long get_ram_size (long *, long); 465 phys_size_t get_effective_memsize(void); 466 467 /* $(BOARD)/$(BOARD).c */ 468 void reset_phy (void); 469 void fdc_hw_init (void); 470 471 /* $(BOARD)/eeprom.c */ 472 void eeprom_init (void); 473 #ifndef CONFIG_SPI 474 int eeprom_probe (unsigned dev_addr, unsigned offset); 475 #endif 476 int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt); 477 int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt); 478 479 /* 480 * Set this up regardless of board 481 * type, to prevent errors. 482 */ 483 #if defined(CONFIG_SPI) || !defined(CONFIG_SYS_I2C_EEPROM_ADDR) 484 # define CONFIG_SYS_DEF_EEPROM_ADDR 0 485 #else 486 #if !defined(CONFIG_ENV_EEPROM_IS_ON_I2C) 487 # define CONFIG_SYS_DEF_EEPROM_ADDR CONFIG_SYS_I2C_EEPROM_ADDR 488 #endif 489 #endif /* CONFIG_SPI || !defined(CONFIG_SYS_I2C_EEPROM_ADDR) */ 490 491 #if defined(CONFIG_SPI) 492 extern void spi_init_f (void); 493 extern void spi_init_r (void); 494 extern ssize_t spi_read (uchar *, int, uchar *, int); 495 extern ssize_t spi_write (uchar *, int, uchar *, int); 496 #endif 497 498 /* $(BOARD)/$(BOARD).c */ 499 int board_early_init_f (void); 500 int board_late_init (void); 501 int board_postclk_init (void); /* after clocks/timebase, before env/serial */ 502 int board_early_init_r (void); 503 void board_poweroff (void); 504 505 #if defined(CONFIG_SYS_DRAM_TEST) 506 int testdram(void); 507 #endif /* CONFIG_SYS_DRAM_TEST */ 508 509 /* $(CPU)/start.S */ 510 #if defined(CONFIG_5xx) || \ 511 defined(CONFIG_8xx) 512 uint get_immr (uint); 513 #endif 514 #if defined(CONFIG_MPC5xxx) 515 uint get_svr (void); 516 #endif 517 uint get_pvr (void); 518 uint get_svr (void); 519 uint rd_ic_cst (void); 520 void wr_ic_cst (uint); 521 void wr_ic_adr (uint); 522 uint rd_dc_cst (void); 523 void wr_dc_cst (uint); 524 void wr_dc_adr (uint); 525 int icache_status (void); 526 void icache_enable (void); 527 void icache_disable(void); 528 int dcache_status (void); 529 void dcache_enable (void); 530 void dcache_disable(void); 531 void mmu_disable(void); 532 #if defined(CONFIG_ARM) 533 void relocate_code(ulong); 534 #else 535 void relocate_code(ulong, gd_t *, ulong) __attribute__ ((noreturn)); 536 #endif 537 ulong get_endaddr (void); 538 void trap_init (ulong); 539 #if defined (CONFIG_4xx) || \ 540 defined (CONFIG_MPC5xxx) || \ 541 defined (CONFIG_MPC85xx) || \ 542 defined (CONFIG_MPC86xx) || \ 543 defined (CONFIG_MPC83xx) 544 unsigned char in8(unsigned int); 545 void out8(unsigned int, unsigned char); 546 unsigned short in16(unsigned int); 547 unsigned short in16r(unsigned int); 548 void out16(unsigned int, unsigned short value); 549 void out16r(unsigned int, unsigned short value); 550 unsigned long in32(unsigned int); 551 unsigned long in32r(unsigned int); 552 void out32(unsigned int, unsigned long value); 553 void out32r(unsigned int, unsigned long value); 554 void ppcDcbf(unsigned long value); 555 void ppcDcbi(unsigned long value); 556 void ppcSync(void); 557 void ppcDcbz(unsigned long value); 558 #endif 559 #if defined (CONFIG_MICROBLAZE) 560 unsigned short in16(unsigned int); 561 void out16(unsigned int, unsigned short value); 562 #endif 563 564 #if defined (CONFIG_MPC83xx) 565 void ppcDWload(unsigned int *addr, unsigned int *ret); 566 void ppcDWstore(unsigned int *addr, unsigned int *value); 567 void disable_addr_trans(void); 568 void enable_addr_trans(void); 569 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) 570 void ddr_enable_ecc(unsigned int dram_size); 571 #endif 572 #endif 573 574 /* 575 * Return the current value of a monotonically increasing microsecond timer. 576 * Granularity may be larger than 1us if hardware does not support this. 577 */ 578 ulong timer_get_us(void); 579 580 /* $(CPU)/cpu.c */ 581 static inline int cpumask_next(int cpu, unsigned int mask) 582 { 583 for (cpu++; !((1 << cpu) & mask); cpu++) 584 ; 585 586 return cpu; 587 } 588 589 #define for_each_cpu(iter, cpu, num_cpus, mask) \ 590 for (iter = 0, cpu = cpumask_next(-1, mask); \ 591 iter < num_cpus; \ 592 iter++, cpu = cpumask_next(cpu, mask)) \ 593 594 int cpu_numcores (void); 595 int cpu_num_dspcores(void); 596 u32 cpu_mask (void); 597 u32 cpu_dsp_mask(void); 598 int is_core_valid (unsigned int); 599 int probecpu (void); 600 int checkcpu (void); 601 int checkicache (void); 602 int checkdcache (void); 603 void upmconfig (unsigned int, unsigned int *, unsigned int); 604 ulong get_tbclk (void); 605 void reset_misc (void); 606 void reset_cpu (ulong addr); 607 #if defined (CONFIG_OF_LIBFDT) && defined (CONFIG_OF_BOARD_SETUP) 608 void ft_cpu_setup(void *blob, bd_t *bd); 609 #ifdef CONFIG_PCI 610 void ft_pci_setup(void *blob, bd_t *bd); 611 #endif 612 #endif 613 614 void smp_set_core_boot_addr(unsigned long addr, int corenr); 615 void smp_kick_all_cpus(void); 616 617 /* $(CPU)/serial.c */ 618 int serial_init (void); 619 void serial_setbrg (void); 620 void serial_putc (const char); 621 void serial_putc_raw(const char); 622 void serial_puts (const char *); 623 int serial_getc (void); 624 int serial_tstc (void); 625 626 /* These versions take a stdio_dev pointer */ 627 struct stdio_dev; 628 int serial_stub_getc(struct stdio_dev *sdev); 629 int serial_stub_tstc(struct stdio_dev *sdev); 630 631 /* $(CPU)/speed.c */ 632 int get_clocks (void); 633 int get_clocks_866 (void); 634 int sdram_adjust_866 (void); 635 int adjust_sdram_tbs_8xx (void); 636 #if defined(CONFIG_MPC8260) 637 int prt_8260_clks (void); 638 #elif defined(CONFIG_MPC5xxx) 639 int prt_mpc5xxx_clks (void); 640 #endif 641 #ifdef CONFIG_4xx 642 ulong get_OPB_freq (void); 643 ulong get_PCI_freq (void); 644 #endif 645 #if defined(CONFIG_S3C24X0) || \ 646 defined(CONFIG_LH7A40X) || \ 647 defined(CONFIG_EP93XX) 648 ulong get_FCLK (void); 649 ulong get_HCLK (void); 650 ulong get_PCLK (void); 651 ulong get_UCLK (void); 652 #endif 653 #if defined(CONFIG_LH7A40X) 654 ulong get_PLLCLK (void); 655 #endif 656 #if defined(CONFIG_IMX) 657 ulong get_systemPLLCLK(void); 658 ulong get_FCLK(void); 659 ulong get_HCLK(void); 660 ulong get_BCLK(void); 661 ulong get_PERCLK1(void); 662 ulong get_PERCLK2(void); 663 ulong get_PERCLK3(void); 664 #endif 665 ulong get_bus_freq (ulong); 666 int get_serial_clock(void); 667 668 #if defined(CONFIG_MPC85xx) 669 typedef MPC85xx_SYS_INFO sys_info_t; 670 void get_sys_info ( sys_info_t * ); 671 # if defined(CONFIG_OF_LIBFDT) 672 void ft_fixup_cpu(void *, u64); 673 void ft_fixup_num_cores(void *); 674 # endif 675 #endif 676 #if defined(CONFIG_MPC86xx) 677 typedef MPC86xx_SYS_INFO sys_info_t; 678 void get_sys_info ( sys_info_t * ); 679 static inline ulong get_ddr_freq(ulong dummy) 680 { 681 return get_bus_freq(dummy); 682 } 683 #else 684 ulong get_ddr_freq(ulong); 685 #endif 686 687 #if defined(CONFIG_4xx) 688 # if defined(CONFIG_440) 689 # if defined(CONFIG_440SPE) 690 unsigned long determine_sysper(void); 691 unsigned long determine_pci_clock_per(void); 692 # endif 693 # endif 694 typedef PPC4xx_SYS_INFO sys_info_t; 695 int ppc440spe_revB(void); 696 void get_sys_info ( sys_info_t * ); 697 #endif 698 699 /* $(CPU)/cpu_init.c */ 700 #if defined(CONFIG_8xx) || defined(CONFIG_MPC8260) 701 void cpu_init_f (volatile immap_t *immr); 702 #endif 703 #if defined(CONFIG_4xx) || defined(CONFIG_MCF52x2) || defined(CONFIG_MPC86xx) 704 void cpu_init_f (void); 705 #endif 706 #ifdef CONFIG_MPC85xx 707 ulong cpu_init_f(void); 708 #endif 709 710 int cpu_init_r (void); 711 #if defined(CONFIG_MPC8260) 712 int prt_8260_rsr (void); 713 #elif defined(CONFIG_MPC83xx) 714 int prt_83xx_rsr (void); 715 #endif 716 717 /* $(CPU)/interrupts.c */ 718 int interrupt_init (void); 719 void timer_interrupt (struct pt_regs *); 720 void external_interrupt (struct pt_regs *); 721 void irq_install_handler(int, interrupt_handler_t *, void *); 722 void irq_free_handler (int); 723 void reset_timer (void); 724 ulong get_timer (ulong base); 725 726 /* Return value of monotonic microsecond timer */ 727 unsigned long timer_get_us(void); 728 729 void enable_interrupts (void); 730 int disable_interrupts (void); 731 732 /* $(CPU)/.../commproc.c */ 733 int dpram_init (void); 734 uint dpram_base(void); 735 uint dpram_base_align(uint align); 736 uint dpram_alloc(uint size); 737 uint dpram_alloc_align(uint size,uint align); 738 void bootcount_store (ulong); 739 ulong bootcount_load (void); 740 #define BOOTCOUNT_MAGIC 0xB001C041 741 742 /* $(CPU)/.../<eth> */ 743 void mii_init (void); 744 745 /* $(CPU)/.../lcd.c */ 746 ulong lcd_setmem (ulong); 747 748 /* $(CPU)/.../video.c */ 749 ulong video_setmem (ulong); 750 751 /* arch/$(ARCH)/lib/cache.c */ 752 void enable_caches(void); 753 void flush_cache (unsigned long, unsigned long); 754 void flush_dcache_all(void); 755 void flush_dcache_range(unsigned long start, unsigned long stop); 756 void invalidate_dcache_range(unsigned long start, unsigned long stop); 757 void invalidate_dcache_all(void); 758 void invalidate_icache_all(void); 759 760 enum { 761 /* Disable caches (else flush caches but leave them active) */ 762 CBL_DISABLE_CACHES = 1 << 0, 763 CBL_SHOW_BOOTSTAGE_REPORT = 1 << 1, 764 765 CBL_ALL = 3, 766 }; 767 768 /** 769 * Clean up ready for linux 770 * 771 * @param flags Flags to control what is done 772 */ 773 int cleanup_before_linux_select(int flags); 774 775 /* arch/$(ARCH)/lib/ticks.S */ 776 uint64_t get_ticks(void); 777 void wait_ticks (unsigned long); 778 779 /* arch/$(ARCH)/lib/time.c */ 780 void __udelay (unsigned long); 781 ulong usec2ticks (unsigned long usec); 782 ulong ticks2usec (unsigned long ticks); 783 int init_timebase (void); 784 785 /* lib/gunzip.c */ 786 int gunzip(void *, int, unsigned char *, unsigned long *); 787 int zunzip(void *dst, int dstlen, unsigned char *src, unsigned long *lenp, 788 int stoponerr, int offset); 789 790 /** 791 * gzwrite progress indicators: defined weak to allow board-specific 792 * overrides: 793 * 794 * gzwrite_progress_init called on startup 795 * gzwrite_progress called during decompress/write loop 796 * gzwrite_progress_finish called at end of loop to 797 * indicate success (retcode=0) or failure 798 */ 799 void gzwrite_progress_init(u64 expected_size); 800 801 void gzwrite_progress(int iteration, 802 u64 bytes_written, 803 u64 total_bytes); 804 805 void gzwrite_progress_finish(int retcode, 806 u64 totalwritten, 807 u64 totalsize, 808 u32 expected_crc, 809 u32 calculated_crc); 810 811 /** 812 * decompress and write gzipped image from memory to block device 813 * 814 * @param src compressed image address 815 * @param len compressed image length in bytes 816 * @param dev block device descriptor 817 * @param szwritebuf bytes per write (pad to erase size) 818 * @param startoffs offset in bytes of first write 819 * @param szexpected expected uncompressed length 820 * may be zero to use gzip trailer 821 * for files under 4GiB 822 */ 823 int gzwrite(unsigned char *src, int len, 824 struct block_dev_desc *dev, 825 unsigned long szwritebuf, 826 u64 startoffs, 827 u64 szexpected); 828 829 /* lib/qsort.c */ 830 void qsort(void *base, size_t nmemb, size_t size, 831 int(*compar)(const void *, const void *)); 832 int strcmp_compar(const void *, const void *); 833 834 /* lib/time.c */ 835 void udelay (unsigned long); 836 void mdelay(unsigned long); 837 838 /* lib/uuid.c */ 839 #include <uuid.h> 840 841 /* lib/vsprintf.c */ 842 #include <vsprintf.h> 843 844 /* lib/strmhz.c */ 845 char * strmhz(char *buf, unsigned long hz); 846 847 /* lib/crc32.c */ 848 #include <u-boot/crc.h> 849 850 /* lib/rand.c */ 851 #define RAND_MAX -1U 852 void srand(unsigned int seed); 853 unsigned int rand(void); 854 unsigned int rand_r(unsigned int *seedp); 855 856 /* common/console.c */ 857 int console_init_f(void); /* Before relocation; uses the serial stuff */ 858 int console_init_r(void); /* After relocation; uses the console stuff */ 859 int console_assign(int file, const char *devname); /* Assign the console */ 860 int ctrlc (void); 861 int had_ctrlc (void); /* have we had a Control-C since last clear? */ 862 void clear_ctrlc (void); /* clear the Control-C condition */ 863 int disable_ctrlc (int); /* 1 to disable, 0 to enable Control-C detect */ 864 int confirm_yesno(void); /* 1 if input is "y", "Y", "yes" or "YES" */ 865 /* 866 * STDIO based functions (can always be used) 867 */ 868 /* serial stuff */ 869 int serial_printf (const char *fmt, ...) 870 __attribute__ ((format (__printf__, 1, 2))); 871 /* stdin */ 872 int getc(void); 873 int tstc(void); 874 875 /* stdout */ 876 #if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_SERIAL_SUPPORT) 877 #define putc(...) do { } while (0) 878 #define puts(...) do { } while (0) 879 #define printf(...) do { } while (0) 880 #define vprintf(...) do { } while (0) 881 #else 882 void putc(const char c); 883 void puts(const char *s); 884 int printf(const char *fmt, ...) 885 __attribute__ ((format (__printf__, 1, 2))); 886 int vprintf(const char *fmt, va_list args); 887 #endif 888 889 /* stderr */ 890 #define eputc(c) fputc(stderr, c) 891 #define eputs(s) fputs(stderr, s) 892 #define eprintf(fmt,args...) fprintf(stderr,fmt ,##args) 893 894 /* 895 * FILE based functions (can only be used AFTER relocation!) 896 */ 897 #define stdin 0 898 #define stdout 1 899 #define stderr 2 900 #define MAX_FILES 3 901 902 int fprintf(int file, const char *fmt, ...) 903 __attribute__ ((format (__printf__, 2, 3))); 904 void fputs(int file, const char *s); 905 void fputc(int file, const char c); 906 int ftstc(int file); 907 int fgetc(int file); 908 909 /* lib/gzip.c */ 910 int gzip(void *dst, unsigned long *lenp, 911 unsigned char *src, unsigned long srclen); 912 int zzip(void *dst, unsigned long *lenp, unsigned char *src, 913 unsigned long srclen, int stoponerr, 914 int (*func)(unsigned long, unsigned long)); 915 916 /* lib/net_utils.c */ 917 #include <net.h> 918 static inline struct in_addr getenv_ip(char *var) 919 { 920 return string_to_ip(getenv(var)); 921 } 922 923 /* 924 * CONSOLE multiplexing. 925 */ 926 #ifdef CONFIG_CONSOLE_MUX 927 #include <iomux.h> 928 #endif 929 930 int pcmcia_init (void); 931 932 #ifdef CONFIG_STATUS_LED 933 # include <status_led.h> 934 #endif 935 936 #include <bootstage.h> 937 938 #ifdef CONFIG_SHOW_ACTIVITY 939 void show_activity(int arg); 940 #endif 941 942 /* Multicore arch functions */ 943 #ifdef CONFIG_MP 944 int cpu_status(int nr); 945 int cpu_reset(int nr); 946 int cpu_disable(int nr); 947 int cpu_release(int nr, int argc, char * const argv[]); 948 #endif 949 950 #endif /* __ASSEMBLY__ */ 951 952 #ifdef CONFIG_PPC 953 /* 954 * Has to be included outside of the #ifndef __ASSEMBLY__ section. 955 * Otherwise might lead to compilation errors in assembler files. 956 */ 957 #include <asm/cache.h> 958 #endif 959 960 /* Put only stuff here that the assembler can digest */ 961 962 #ifdef CONFIG_POST 963 #define CONFIG_HAS_POST 964 #ifndef CONFIG_POST_ALT_LIST 965 #define CONFIG_POST_STD_LIST 966 #endif 967 #endif 968 969 #ifdef CONFIG_INIT_CRITICAL 970 #error CONFIG_INIT_CRITICAL is deprecated! 971 #error Read section CONFIG_SKIP_LOWLEVEL_INIT in README. 972 #endif 973 974 #define ROUND(a,b) (((a) + (b) - 1) & ~((b) - 1)) 975 976 /* 977 * check_member() - Check the offset of a structure member 978 * 979 * @structure: Name of structure (e.g. global_data) 980 * @member: Name of member (e.g. baudrate) 981 * @offset: Expected offset in bytes 982 */ 983 #define check_member(structure, member, offset) _Static_assert( \ 984 offsetof(struct structure, member) == offset, \ 985 "`struct " #structure "` offset for `" #member "` is not " #offset) 986 987 /* Avoid using CONFIG_EFI_STUB directly as we may boot from other loaders */ 988 #ifdef CONFIG_EFI_STUB 989 #define ll_boot_init() false 990 #else 991 #define ll_boot_init() true 992 #endif 993 994 /* Pull in stuff for the build system */ 995 #ifdef DO_DEPS_ONLY 996 # include <environment.h> 997 #endif 998 999 #endif /* __COMMON_H_ */ 1000