xref: /openbmc/u-boot/include/common.h (revision 9272a9b4)
1 /*
2  * (C) Copyright 2000-2009
3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4  *
5  * SPDX-License-Identifier:	GPL-2.0+
6  */
7 
8 #ifndef __COMMON_H_
9 #define __COMMON_H_	1
10 
11 #ifndef __ASSEMBLY__		/* put C only stuff in this section */
12 
13 typedef unsigned char		uchar;
14 typedef volatile unsigned long	vu_long;
15 typedef volatile unsigned short vu_short;
16 typedef volatile unsigned char	vu_char;
17 
18 #include <config.h>
19 #include <asm-offsets.h>
20 #include <linux/bitops.h>
21 #include <linux/types.h>
22 #include <linux/string.h>
23 #include <linux/stringify.h>
24 #include <asm/ptrace.h>
25 #include <stdarg.h>
26 #if defined(CONFIG_PCI) && defined(CONFIG_4xx)
27 #include <pci.h>
28 #endif
29 #if defined(CONFIG_8xx)
30 #include <asm/8xx_immap.h>
31 #if defined(CONFIG_MPC852)	|| defined(CONFIG_MPC852T)	|| \
32     defined(CONFIG_MPC859)	|| defined(CONFIG_MPC859T)	|| \
33     defined(CONFIG_MPC859DSL)	|| \
34     defined(CONFIG_MPC866)	|| defined(CONFIG_MPC866T)	|| \
35     defined(CONFIG_MPC866P)
36 # define CONFIG_MPC866_FAMILY 1
37 #elif defined(CONFIG_MPC870) \
38    || defined(CONFIG_MPC875) \
39    || defined(CONFIG_MPC880) \
40    || defined(CONFIG_MPC885)
41 # define CONFIG_MPC885_FAMILY   1
42 #endif
43 #if   defined(CONFIG_MPC860)	   \
44    || defined(CONFIG_MPC860T)	   \
45    || defined(CONFIG_MPC866_FAMILY) \
46    || defined(CONFIG_MPC885_FAMILY)
47 # define CONFIG_MPC86x 1
48 #endif
49 #elif defined(CONFIG_5xx)
50 #include <asm/5xx_immap.h>
51 #elif defined(CONFIG_MPC5xxx)
52 #include <mpc5xxx.h>
53 #elif defined(CONFIG_MPC512X)
54 #include <asm/immap_512x.h>
55 #elif defined(CONFIG_MPC8260)
56 #if   defined(CONFIG_MPC8247) \
57    || defined(CONFIG_MPC8248) \
58    || defined(CONFIG_MPC8271) \
59    || defined(CONFIG_MPC8272)
60 #define CONFIG_MPC8272_FAMILY	1
61 #endif
62 #include <asm/immap_8260.h>
63 #endif
64 #ifdef CONFIG_MPC86xx
65 #include <mpc86xx.h>
66 #include <asm/immap_86xx.h>
67 #endif
68 #ifdef CONFIG_MPC85xx
69 #include <mpc85xx.h>
70 #include <asm/immap_85xx.h>
71 #endif
72 #ifdef CONFIG_MPC83xx
73 #include <mpc83xx.h>
74 #include <asm/immap_83xx.h>
75 #endif
76 #ifdef	CONFIG_4xx
77 #include <asm/ppc4xx.h>
78 #endif
79 #ifdef CONFIG_HYMOD
80 #include <board/hymod/hymod.h>
81 #endif
82 #ifdef CONFIG_ARM
83 #define asmlinkage	/* nothing */
84 #endif
85 #ifdef CONFIG_BLACKFIN
86 #include <asm/blackfin.h>
87 #endif
88 #ifdef CONFIG_SOC_DA8XX
89 #include <asm/arch/hardware.h>
90 #endif
91 
92 #include <part.h>
93 #include <flash.h>
94 #include <image.h>
95 
96 #ifdef __LP64__
97 #define CONFIG_SYS_SUPPORT_64BIT_DATA
98 #endif
99 
100 #ifdef DEBUG
101 #define _DEBUG	1
102 #else
103 #define _DEBUG	0
104 #endif
105 
106 /*
107  * Output a debug text when condition "cond" is met. The "cond" should be
108  * computed by a preprocessor in the best case, allowing for the best
109  * optimization.
110  */
111 #define debug_cond(cond, fmt, args...)		\
112 	do {					\
113 		if (cond)			\
114 			printf(fmt, ##args);	\
115 	} while (0)
116 
117 #define debug(fmt, args...)			\
118 	debug_cond(_DEBUG, fmt, ##args)
119 
120 /*
121  * An assertion is run-time check done in debug mode only. If DEBUG is not
122  * defined then it is skipped. If DEBUG is defined and the assertion fails,
123  * then it calls panic*( which may or may not reset/halt U-Boot (see
124  * CONFIG_PANIC_HANG), It is hoped that all failing assertions are found
125  * before release, and after release it is hoped that they don't matter. But
126  * in any case these failing assertions cannot be fixed with a reset (which
127  * may just do the same assertion again).
128  */
129 void __assert_fail(const char *assertion, const char *file, unsigned line,
130 		   const char *function);
131 #define assert(x) \
132 	({ if (!(x) && _DEBUG) \
133 		__assert_fail(#x, __FILE__, __LINE__, __func__); })
134 
135 #define error(fmt, args...) do {					\
136 		printf("ERROR: " fmt "\nat %s:%d/%s()\n",		\
137 			##args, __FILE__, __LINE__, __func__);		\
138 } while (0)
139 
140 #ifndef BUG
141 #define BUG() do { \
142 	printf("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __FUNCTION__); \
143 	panic("BUG!"); \
144 } while (0)
145 #define BUG_ON(condition) do { if (unlikely((condition)!=0)) BUG(); } while(0)
146 #endif /* BUG */
147 
148 /* Force a compilation error if condition is true */
149 #define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)]))
150 
151 typedef void (interrupt_handler_t)(void *);
152 
153 #include <asm/u-boot.h> /* boot information for Linux kernel */
154 #include <asm/global_data.h>	/* global data used for startup functions */
155 
156 /*
157  * enable common handling for all TQM8xxL/M boards:
158  * - CONFIG_TQM8xxM will be defined for all TQM8xxM boards
159  * - CONFIG_TQM8xxL will be defined for all TQM8xxL _and_ TQM8xxM boards
160  *                  and for the TQM885D board
161  */
162 #if defined(CONFIG_TQM823M) || defined(CONFIG_TQM850M) || \
163     defined(CONFIG_TQM855M) || defined(CONFIG_TQM860M) || \
164     defined(CONFIG_TQM862M) || defined(CONFIG_TQM866M)
165 # ifndef CONFIG_TQM8xxM
166 #  define CONFIG_TQM8xxM
167 # endif
168 #endif
169 #if defined(CONFIG_TQM823L) || defined(CONFIG_TQM850L) || \
170     defined(CONFIG_TQM855L) || defined(CONFIG_TQM860L) || \
171     defined(CONFIG_TQM862L) || defined(CONFIG_TQM8xxM) || \
172     defined(CONFIG_TQM885D)
173 # ifndef CONFIG_TQM8xxL
174 #  define CONFIG_TQM8xxL
175 # endif
176 #endif
177 
178 /*
179  * General Purpose Utilities
180  */
181 #define min(X, Y)				\
182 	({ typeof(X) __x = (X);			\
183 		typeof(Y) __y = (Y);		\
184 		(__x < __y) ? __x : __y; })
185 
186 #define max(X, Y)				\
187 	({ typeof(X) __x = (X);			\
188 		typeof(Y) __y = (Y);		\
189 		(__x > __y) ? __x : __y; })
190 
191 #define MIN(x, y)  min(x, y)
192 #define MAX(x, y)  max(x, y)
193 
194 #define min3(X, Y, Z)				\
195 	({ typeof(X) __x = (X);			\
196 		typeof(Y) __y = (Y);		\
197 		typeof(Z) __z = (Z);		\
198 		__x < __y ? (__x < __z ? __x : __z) :	\
199 		(__y < __z ? __y : __z); })
200 
201 #define max3(X, Y, Z)				\
202 	({ typeof(X) __x = (X);			\
203 		typeof(Y) __y = (Y);		\
204 		typeof(Z) __z = (Z);		\
205 		__x > __y ? (__x > __z ? __x : __z) :	\
206 		(__y > __z ? __y : __z); })
207 
208 #define MIN3(x, y, z)  min3(x, y, z)
209 #define MAX3(x, y, z)  max3(x, y, z)
210 
211 /*
212  * Return the absolute value of a number.
213  *
214  * This handles unsigned and signed longs, ints, shorts and chars.  For all
215  * input types abs() returns a signed long.
216  *
217  * For 64-bit types, use abs64()
218  */
219 #define abs(x) ({						\
220 		long ret;					\
221 		if (sizeof(x) == sizeof(long)) {		\
222 			long __x = (x);				\
223 			ret = (__x < 0) ? -__x : __x;		\
224 		} else {					\
225 			int __x = (x);				\
226 			ret = (__x < 0) ? -__x : __x;		\
227 		}						\
228 		ret;						\
229 	})
230 
231 #define abs64(x) ({				\
232 		s64 __x = (x);			\
233 		(__x < 0) ? -__x : __x;		\
234 	})
235 
236 #if defined(CONFIG_ENV_IS_EMBEDDED)
237 #define TOTAL_MALLOC_LEN	CONFIG_SYS_MALLOC_LEN
238 #elif ( ((CONFIG_ENV_ADDR+CONFIG_ENV_SIZE) < CONFIG_SYS_MONITOR_BASE) || \
239 	(CONFIG_ENV_ADDR >= (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)) ) || \
240       defined(CONFIG_ENV_IS_IN_NVRAM)
241 #define	TOTAL_MALLOC_LEN	(CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE)
242 #else
243 #define	TOTAL_MALLOC_LEN	CONFIG_SYS_MALLOC_LEN
244 #endif
245 
246 /**
247  * container_of - cast a member of a structure out to the containing structure
248  * @ptr:	the pointer to the member.
249  * @type:	the type of the container struct this is embedded in.
250  * @member:	the name of the member within the struct.
251  *
252  */
253 #define container_of(ptr, type, member) ({			\
254 	const typeof( ((type *)0)->member ) *__mptr = (ptr);	\
255 	(type *)( (char *)__mptr - offsetof(type,member) );})
256 
257 /*
258  * Function Prototypes
259  */
260 
261 void	hang		(void) __attribute__ ((noreturn));
262 
263 int	timer_init(void);
264 int	cpu_init(void);
265 
266 /* */
267 phys_size_t initdram (int);
268 int	display_options (void);
269 void	print_size(unsigned long long, const char *);
270 int print_buffer(ulong addr, const void *data, uint width, uint count,
271 		 uint linelen);
272 
273 /* common/main.c */
274 void	main_loop	(void);
275 int run_command(const char *cmd, int flag);
276 
277 /**
278  * Run a list of commands separated by ; or even \0
279  *
280  * Note that if 'len' is not -1, then the command does not need to be nul
281  * terminated, Memory will be allocated for the command in that case.
282  *
283  * @param cmd	List of commands to run, each separated bu semicolon
284  * @param len	Length of commands excluding terminator if known (-1 if not)
285  * @param flag	Execution flags (CMD_FLAG_...)
286  * @return 0 on success, or != 0 on error.
287  */
288 int run_command_list(const char *cmd, int len, int flag);
289 extern char console_buffer[];
290 
291 /* arch/$(ARCH)/lib/board.c */
292 void	board_init_f(ulong);
293 void	board_init_r  (gd_t *, ulong) __attribute__ ((noreturn));
294 int	checkboard    (void);
295 int	checkflash    (void);
296 int	checkdram     (void);
297 int	last_stage_init(void);
298 extern ulong monitor_flash_len;
299 int mac_read_from_eeprom(void);
300 extern u8 __dtb_dt_begin[];	/* embedded device tree blob */
301 int set_cpu_clk_info(void);
302 int mdm_init(void);
303 #if defined(CONFIG_DISPLAY_CPUINFO)
304 int print_cpuinfo(void);
305 #else
306 static inline int print_cpuinfo(void)
307 {
308 	return 0;
309 }
310 #endif
311 int update_flash_size(int flash_size);
312 int arch_early_init_r(void);
313 
314 /**
315  * Show the DRAM size in a board-specific way
316  *
317  * This is used by boards to display DRAM information in their own way.
318  *
319  * @param size	Size of DRAM (which should be displayed along with other info)
320  */
321 void board_show_dram(ulong size);
322 
323 /**
324  * arch_fixup_memory_node() - Write arch-specific memory information to fdt
325  *
326  * Defined in arch/$(ARCH)/lib/bootm.c
327  *
328  * @blob:	FDT blob to write to
329  * @return 0 if ok, or -ve FDT_ERR_... on failure
330  */
331 int arch_fixup_memory_node(void *blob);
332 
333 /* common/flash.c */
334 void flash_perror (int);
335 
336 /* common/cmd_source.c */
337 int	source (ulong addr, const char *fit_uname);
338 
339 extern ulong load_addr;		/* Default Load Address */
340 extern ulong save_addr;		/* Default Save Address */
341 extern ulong save_size;		/* Default Save Size */
342 
343 /* common/cmd_doc.c */
344 void	doc_probe(unsigned long physadr);
345 
346 /* common/cmd_net.c */
347 int do_tftpb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
348 
349 /* common/cmd_fat.c */
350 int do_fat_fsload(cmd_tbl_t *, int, int, char * const []);
351 
352 /* common/cmd_ext2.c */
353 int do_ext2load(cmd_tbl_t *, int, int, char * const []);
354 
355 /* common/cmd_nvedit.c */
356 int	env_init     (void);
357 void	env_relocate (void);
358 int	envmatch     (uchar *, int);
359 
360 /* Avoid unfortunate conflict with libc's getenv() */
361 #ifdef CONFIG_SANDBOX
362 #define getenv uboot_getenv
363 #endif
364 char	*getenv	     (const char *);
365 int	getenv_f     (const char *name, char *buf, unsigned len);
366 ulong getenv_ulong(const char *name, int base, ulong default_val);
367 
368 /**
369  * getenv_hex() - Return an environment variable as a hex value
370  *
371  * Decode an environment as a hex number (it may or may not have a 0x
372  * prefix). If the environment variable cannot be found, or does not start
373  * with hex digits, the default value is returned.
374  *
375  * @varname:		Variable to decode
376  * @default_val:	Value to return on error
377  */
378 ulong getenv_hex(const char *varname, ulong default_val);
379 
380 /*
381  * Read an environment variable as a boolean
382  * Return -1 if variable does not exist (default to true)
383  */
384 int getenv_yesno(const char *var);
385 int	saveenv	     (void);
386 int	setenv	     (const char *, const char *);
387 int setenv_ulong(const char *varname, ulong value);
388 int setenv_hex(const char *varname, ulong value);
389 /**
390  * setenv_addr - Set an environment variable to an address in hex
391  *
392  * @varname:	Environment variable to set
393  * @addr:	Value to set it to
394  * @return 0 if ok, 1 on error
395  */
396 static inline int setenv_addr(const char *varname, const void *addr)
397 {
398 	return setenv_hex(varname, (ulong)addr);
399 }
400 
401 #ifdef CONFIG_ARM
402 # include <asm/mach-types.h>
403 # include <asm/setup.h>
404 # include <asm/u-boot-arm.h>	/* ARM version to be fixed! */
405 #endif /* CONFIG_ARM */
406 #ifdef CONFIG_X86		/* x86 version to be fixed! */
407 # include <asm/u-boot-x86.h>
408 #endif /* CONFIG_X86 */
409 #ifdef CONFIG_SANDBOX
410 # include <asm/u-boot-sandbox.h>	/* TODO(sjg) what needs to be fixed? */
411 #endif
412 #ifdef CONFIG_NDS32
413 # include <asm/mach-types.h>
414 # include <asm/setup.h>
415 # include <asm/u-boot-nds32.h>
416 #endif /* CONFIG_NDS32 */
417 #ifdef CONFIG_MIPS
418 # include <asm/u-boot-mips.h>
419 #endif /* CONFIG_MIPS */
420 #ifdef CONFIG_ARC
421 # include <asm/u-boot-arc.h>
422 #endif /* CONFIG_ARC */
423 
424 #ifdef CONFIG_AUTO_COMPLETE
425 int env_complete(char *var, int maxv, char *cmdv[], int maxsz, char *buf);
426 #endif
427 int get_env_id (void);
428 
429 void	pci_init      (void);
430 void	pci_init_board(void);
431 void	pciinfo	      (int, int);
432 
433 #if defined(CONFIG_PCI) && defined(CONFIG_4xx)
434     int	   pci_pre_init	       (struct pci_controller *);
435     int	   is_pci_host	       (struct pci_controller *);
436 #endif
437 
438 #if defined(CONFIG_PCI) && (defined(CONFIG_440) || defined(CONFIG_405EX))
439 #   if defined(CONFIG_SYS_PCI_TARGET_INIT)
440 	void	pci_target_init	     (struct pci_controller *);
441 #   endif
442 #   if defined(CONFIG_SYS_PCI_MASTER_INIT)
443 	void	pci_master_init	     (struct pci_controller *);
444 #   endif
445 #if defined(CONFIG_440SPE) || \
446     defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
447     defined(CONFIG_405EX)
448    void pcie_setup_hoses(int busno);
449 #endif
450 #endif
451 
452 int	misc_init_f   (void);
453 int	misc_init_r   (void);
454 
455 /* common/exports.c */
456 void	jumptable_init(void);
457 
458 /* common/kallsysm.c */
459 const char *symbol_lookup(unsigned long addr, unsigned long *caddr);
460 
461 /* api/api.c */
462 void	api_init (void);
463 
464 /* common/memsize.c */
465 long	get_ram_size  (long *, long);
466 phys_size_t get_effective_memsize(void);
467 
468 /* $(BOARD)/$(BOARD).c */
469 void	reset_phy     (void);
470 void	fdc_hw_init   (void);
471 
472 /* $(BOARD)/eeprom.c */
473 void eeprom_init  (void);
474 #ifndef CONFIG_SPI
475 int  eeprom_probe (unsigned dev_addr, unsigned offset);
476 #endif
477 int  eeprom_read  (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
478 int  eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
479 #ifdef CONFIG_LWMON
480 extern uchar pic_read  (uchar reg);
481 extern void  pic_write (uchar reg, uchar val);
482 #endif
483 
484 /*
485  * Set this up regardless of board
486  * type, to prevent errors.
487  */
488 #if defined(CONFIG_SPI) || !defined(CONFIG_SYS_I2C_EEPROM_ADDR)
489 # define CONFIG_SYS_DEF_EEPROM_ADDR 0
490 #else
491 #if !defined(CONFIG_ENV_EEPROM_IS_ON_I2C)
492 # define CONFIG_SYS_DEF_EEPROM_ADDR CONFIG_SYS_I2C_EEPROM_ADDR
493 #endif
494 #endif /* CONFIG_SPI || !defined(CONFIG_SYS_I2C_EEPROM_ADDR) */
495 
496 #if defined(CONFIG_SPI)
497 extern void spi_init_f (void);
498 extern void spi_init_r (void);
499 extern ssize_t spi_read	 (uchar *, int, uchar *, int);
500 extern ssize_t spi_write (uchar *, int, uchar *, int);
501 #endif
502 
503 void rpxlite_init (void);
504 
505 #ifdef CONFIG_HERMES
506 /* $(BOARD)/hermes.c */
507 void hermes_start_lxt980 (int speed);
508 #endif
509 
510 #ifdef CONFIG_EVB64260
511 void  evb64260_init(void);
512 void  debug_led(int, int);
513 void  display_mem_map(void);
514 void  perform_soft_reset(void);
515 #endif
516 
517 /* $(BOARD)/$(BOARD).c */
518 int board_early_init_f (void);
519 int board_late_init (void);
520 int board_postclk_init (void); /* after clocks/timebase, before env/serial */
521 int board_early_init_r (void);
522 void board_poweroff (void);
523 
524 #if defined(CONFIG_SYS_DRAM_TEST)
525 int testdram(void);
526 #endif /* CONFIG_SYS_DRAM_TEST */
527 
528 /* $(CPU)/start.S */
529 #if defined(CONFIG_5xx) || \
530     defined(CONFIG_8xx)
531 uint	get_immr      (uint);
532 #endif
533 uint	get_pir	      (void);
534 #if defined(CONFIG_MPC5xxx)
535 uint	get_svr       (void);
536 #endif
537 uint	get_pvr	      (void);
538 uint	get_svr	      (void);
539 uint	rd_ic_cst     (void);
540 void	wr_ic_cst     (uint);
541 void	wr_ic_adr     (uint);
542 uint	rd_dc_cst     (void);
543 void	wr_dc_cst     (uint);
544 void	wr_dc_adr     (uint);
545 int	icache_status (void);
546 void	icache_enable (void);
547 void	icache_disable(void);
548 int	dcache_status (void);
549 void	dcache_enable (void);
550 void	dcache_disable(void);
551 void	mmu_disable(void);
552 #if defined(CONFIG_ARM)
553 void	relocate_code(ulong);
554 #else
555 void	relocate_code(ulong, gd_t *, ulong) __attribute__ ((noreturn));
556 #endif
557 ulong	get_endaddr   (void);
558 void	trap_init     (ulong);
559 #if defined (CONFIG_4xx)	|| \
560     defined (CONFIG_MPC5xxx)	|| \
561     defined (CONFIG_74xx_7xx)	|| \
562     defined (CONFIG_74x)	|| \
563     defined (CONFIG_75x)	|| \
564     defined (CONFIG_74xx)	|| \
565     defined (CONFIG_MPC85xx)	|| \
566     defined (CONFIG_MPC86xx)	|| \
567     defined (CONFIG_MPC83xx)
568 unsigned char	in8(unsigned int);
569 void		out8(unsigned int, unsigned char);
570 unsigned short	in16(unsigned int);
571 unsigned short	in16r(unsigned int);
572 void		out16(unsigned int, unsigned short value);
573 void		out16r(unsigned int, unsigned short value);
574 unsigned long	in32(unsigned int);
575 unsigned long	in32r(unsigned int);
576 void		out32(unsigned int, unsigned long value);
577 void		out32r(unsigned int, unsigned long value);
578 void		ppcDcbf(unsigned long value);
579 void		ppcDcbi(unsigned long value);
580 void		ppcSync(void);
581 void		ppcDcbz(unsigned long value);
582 #endif
583 #if defined (CONFIG_MICROBLAZE)
584 unsigned short	in16(unsigned int);
585 void		out16(unsigned int, unsigned short value);
586 #endif
587 
588 #if defined (CONFIG_MPC83xx)
589 void		ppcDWload(unsigned int *addr, unsigned int *ret);
590 void		ppcDWstore(unsigned int *addr, unsigned int *value);
591 void disable_addr_trans(void);
592 void enable_addr_trans(void);
593 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
594 void ddr_enable_ecc(unsigned int dram_size);
595 #endif
596 #endif
597 
598 /*
599  * Return the current value of a monotonically increasing microsecond timer.
600  * Granularity may be larger than 1us if hardware does not support this.
601  */
602 ulong timer_get_us(void);
603 
604 /* $(CPU)/cpu.c */
605 static inline int cpumask_next(int cpu, unsigned int mask)
606 {
607 	for (cpu++; !((1 << cpu) & mask); cpu++)
608 		;
609 
610 	return cpu;
611 }
612 
613 #define for_each_cpu(iter, cpu, num_cpus, mask) \
614 	for (iter = 0, cpu = cpumask_next(-1, mask); \
615 		iter < num_cpus; \
616 		iter++, cpu = cpumask_next(cpu, mask)) \
617 
618 int	cpu_numcores  (void);
619 u32	cpu_mask      (void);
620 int	is_core_valid (unsigned int);
621 int	probecpu      (void);
622 int	checkcpu      (void);
623 int	checkicache   (void);
624 int	checkdcache   (void);
625 void	upmconfig     (unsigned int, unsigned int *, unsigned int);
626 ulong	get_tbclk     (void);
627 void	reset_cpu     (ulong addr);
628 #if defined (CONFIG_OF_LIBFDT) && defined (CONFIG_OF_BOARD_SETUP)
629 void ft_cpu_setup(void *blob, bd_t *bd);
630 #ifdef CONFIG_PCI
631 void ft_pci_setup(void *blob, bd_t *bd);
632 #endif
633 #endif
634 
635 void smp_set_core_boot_addr(unsigned long addr, int corenr);
636 void smp_kick_all_cpus(void);
637 
638 /* $(CPU)/serial.c */
639 int	serial_init   (void);
640 void	serial_setbrg (void);
641 void	serial_putc   (const char);
642 void	serial_putc_raw(const char);
643 void	serial_puts   (const char *);
644 int	serial_getc   (void);
645 int	serial_tstc   (void);
646 
647 void	_serial_setbrg (const int);
648 void	_serial_putc   (const char, const int);
649 void	_serial_putc_raw(const char, const int);
650 void	_serial_puts   (const char *, const int);
651 int	_serial_getc   (const int);
652 int	_serial_tstc   (const int);
653 
654 /* $(CPU)/speed.c */
655 int	get_clocks (void);
656 int	get_clocks_866 (void);
657 int	sdram_adjust_866 (void);
658 int	adjust_sdram_tbs_8xx (void);
659 #if defined(CONFIG_MPC8260)
660 int	prt_8260_clks (void);
661 #elif defined(CONFIG_MPC5xxx)
662 int	prt_mpc5xxx_clks (void);
663 #endif
664 #ifdef CONFIG_4xx
665 ulong	get_OPB_freq (void);
666 ulong	get_PCI_freq (void);
667 #endif
668 #if defined(CONFIG_S3C24X0) || \
669     defined(CONFIG_LH7A40X) || \
670     defined(CONFIG_EP93XX)
671 ulong	get_FCLK (void);
672 ulong	get_HCLK (void);
673 ulong	get_PCLK (void);
674 ulong	get_UCLK (void);
675 #endif
676 #if defined(CONFIG_LH7A40X)
677 ulong	get_PLLCLK (void);
678 #endif
679 #if defined(CONFIG_IMX)
680 ulong get_systemPLLCLK(void);
681 ulong get_FCLK(void);
682 ulong get_HCLK(void);
683 ulong get_BCLK(void);
684 ulong get_PERCLK1(void);
685 ulong get_PERCLK2(void);
686 ulong get_PERCLK3(void);
687 #endif
688 ulong	get_bus_freq  (ulong);
689 int get_serial_clock(void);
690 
691 #if defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx)
692 ulong get_ddr_freq(ulong);
693 #endif
694 #if defined(CONFIG_MPC85xx)
695 typedef MPC85xx_SYS_INFO sys_info_t;
696 void	get_sys_info  ( sys_info_t * );
697 #  if defined(CONFIG_OF_LIBFDT)
698 	void ft_fixup_cpu(void *, u64);
699 	void ft_fixup_num_cores(void *);
700 #  endif
701 #endif
702 #if defined(CONFIG_MPC86xx)
703 typedef MPC86xx_SYS_INFO sys_info_t;
704 void   get_sys_info  ( sys_info_t * );
705 static inline ulong get_ddr_freq(ulong dummy)
706 {
707 	return get_bus_freq(dummy);
708 }
709 #endif
710 
711 #if defined(CONFIG_4xx)
712 #  if defined(CONFIG_440)
713 #	if defined(CONFIG_440SPE)
714 	 unsigned long determine_sysper(void);
715 	 unsigned long determine_pci_clock_per(void);
716 #	endif
717 #  endif
718 typedef PPC4xx_SYS_INFO sys_info_t;
719 int	ppc440spe_revB(void);
720 void	get_sys_info  ( sys_info_t * );
721 #endif
722 
723 /* $(CPU)/cpu_init.c */
724 #if defined(CONFIG_8xx) || defined(CONFIG_MPC8260)
725 void	cpu_init_f    (volatile immap_t *immr);
726 #endif
727 #if defined(CONFIG_4xx) || defined(CONFIG_MCF52x2) || defined(CONFIG_MPC86xx)
728 void	cpu_init_f    (void);
729 #endif
730 #ifdef CONFIG_MPC85xx
731 ulong cpu_init_f(void);
732 #endif
733 
734 int	cpu_init_r    (void);
735 #if defined(CONFIG_MPC8260)
736 int	prt_8260_rsr  (void);
737 #elif defined(CONFIG_MPC83xx)
738 int	prt_83xx_rsr  (void);
739 #endif
740 
741 /* $(CPU)/interrupts.c */
742 int	interrupt_init	   (void);
743 void	timer_interrupt	   (struct pt_regs *);
744 void	external_interrupt (struct pt_regs *);
745 void	irq_install_handler(int, interrupt_handler_t *, void *);
746 void	irq_free_handler   (int);
747 void	reset_timer	   (void);
748 ulong	get_timer	   (ulong base);
749 
750 /* Return value of monotonic microsecond timer */
751 unsigned long timer_get_us(void);
752 
753 void	enable_interrupts  (void);
754 int	disable_interrupts (void);
755 
756 /* $(CPU)/.../commproc.c */
757 int	dpram_init (void);
758 uint	dpram_base(void);
759 uint	dpram_base_align(uint align);
760 uint	dpram_alloc(uint size);
761 uint	dpram_alloc_align(uint size,uint align);
762 void	bootcount_store (ulong);
763 ulong	bootcount_load (void);
764 #define BOOTCOUNT_MAGIC		0xB001C041
765 
766 /* $(CPU)/.../<eth> */
767 void mii_init (void);
768 
769 /* $(CPU)/.../lcd.c */
770 ulong	lcd_setmem (ulong);
771 
772 /* $(CPU)/.../video.c */
773 ulong	video_setmem (ulong);
774 
775 /* arch/$(ARCH)/lib/cache.c */
776 void	enable_caches(void);
777 void	flush_cache   (unsigned long, unsigned long);
778 void	flush_dcache_all(void);
779 void	flush_dcache_range(unsigned long start, unsigned long stop);
780 void	invalidate_dcache_range(unsigned long start, unsigned long stop);
781 void	invalidate_dcache_all(void);
782 void	invalidate_icache_all(void);
783 
784 /* arch/$(ARCH)/lib/ticks.S */
785 unsigned long long get_ticks(void);
786 void	wait_ticks    (unsigned long);
787 
788 /* arch/$(ARCH)/lib/time.c */
789 void	__udelay      (unsigned long);
790 ulong	usec2ticks    (unsigned long usec);
791 ulong	ticks2usec    (unsigned long ticks);
792 int	init_timebase (void);
793 
794 /* lib/gunzip.c */
795 int gunzip(void *, int, unsigned char *, unsigned long *);
796 int zunzip(void *dst, int dstlen, unsigned char *src, unsigned long *lenp,
797 						int stoponerr, int offset);
798 
799 /* lib/qsort.c */
800 void qsort(void *base, size_t nmemb, size_t size,
801 	   int(*compar)(const void *, const void *));
802 int strcmp_compar(const void *, const void *);
803 
804 /* lib/time.c */
805 void	udelay        (unsigned long);
806 void mdelay(unsigned long);
807 
808 /* lib/uuid.c */
809 #include <uuid.h>
810 
811 /* lib/vsprintf.c */
812 #include <vsprintf.h>
813 
814 /* lib/strmhz.c */
815 char *	strmhz(char *buf, unsigned long hz);
816 
817 /* lib/crc32.c */
818 #include <u-boot/crc.h>
819 
820 /* lib/rand.c */
821 #define RAND_MAX -1U
822 void srand(unsigned int seed);
823 unsigned int rand(void);
824 unsigned int rand_r(unsigned int *seedp);
825 
826 /* common/console.c */
827 int	console_init_f(void);	/* Before relocation; uses the serial  stuff	*/
828 int	console_init_r(void);	/* After  relocation; uses the console stuff	*/
829 int	console_assign(int file, const char *devname);	/* Assign the console	*/
830 int	ctrlc (void);
831 int	had_ctrlc (void);	/* have we had a Control-C since last clear? */
832 void	clear_ctrlc (void);	/* clear the Control-C condition */
833 int	disable_ctrlc (int);	/* 1 to disable, 0 to enable Control-C detect */
834 int confirm_yesno(void);        /*  1 if input is "y", "Y", "yes" or "YES" */
835 /*
836  * STDIO based functions (can always be used)
837  */
838 /* serial stuff */
839 int	serial_printf (const char *fmt, ...)
840 		__attribute__ ((format (__printf__, 1, 2)));
841 /* stdin */
842 int	getc(void);
843 int	tstc(void);
844 
845 /* stdout */
846 void	putc(const char c);
847 void	puts(const char *s);
848 int	printf(const char *fmt, ...)
849 		__attribute__ ((format (__printf__, 1, 2)));
850 int	vprintf(const char *fmt, va_list args);
851 
852 /* stderr */
853 #define eputc(c)		fputc(stderr, c)
854 #define eputs(s)		fputs(stderr, s)
855 #define eprintf(fmt,args...)	fprintf(stderr,fmt ,##args)
856 
857 /*
858  * FILE based functions (can only be used AFTER relocation!)
859  */
860 #define stdin		0
861 #define stdout		1
862 #define stderr		2
863 #define MAX_FILES	3
864 
865 int	fprintf(int file, const char *fmt, ...)
866 		__attribute__ ((format (__printf__, 2, 3)));
867 void	fputs(int file, const char *s);
868 void	fputc(int file, const char c);
869 int	ftstc(int file);
870 int	fgetc(int file);
871 
872 /* lib/gzip.c */
873 int gzip(void *dst, unsigned long *lenp,
874 		unsigned char *src, unsigned long srclen);
875 int zzip(void *dst, unsigned long *lenp, unsigned char *src,
876 		unsigned long srclen, int stoponerr,
877 		int (*func)(unsigned long, unsigned long));
878 
879 /* lib/net_utils.c */
880 #include <net.h>
881 static inline IPaddr_t getenv_IPaddr(char *var)
882 {
883 	return string_to_ip(getenv(var));
884 }
885 
886 /*
887  * CONSOLE multiplexing.
888  */
889 #ifdef CONFIG_CONSOLE_MUX
890 #include <iomux.h>
891 #endif
892 
893 int	pcmcia_init (void);
894 
895 #ifdef CONFIG_STATUS_LED
896 # include <status_led.h>
897 #endif
898 
899 #include <bootstage.h>
900 
901 #ifdef CONFIG_SHOW_ACTIVITY
902 void show_activity(int arg);
903 #endif
904 
905 /* Multicore arch functions */
906 #ifdef CONFIG_MP
907 int cpu_status(int nr);
908 int cpu_reset(int nr);
909 int cpu_disable(int nr);
910 int cpu_release(int nr, int argc, char * const argv[]);
911 #endif
912 
913 /* Define a null map_sysmem() if the architecture doesn't use it */
914 # ifndef CONFIG_ARCH_MAP_SYSMEM
915 static inline void *map_sysmem(phys_addr_t paddr, unsigned long len)
916 {
917 	return (void *)(uintptr_t)paddr;
918 }
919 
920 static inline void unmap_sysmem(const void *vaddr)
921 {
922 }
923 
924 static inline phys_addr_t map_to_sysmem(const void *ptr)
925 {
926 	return (phys_addr_t)(uintptr_t)ptr;
927 }
928 # endif
929 
930 #endif /* __ASSEMBLY__ */
931 
932 #ifdef CONFIG_PPC
933 /*
934  * Has to be included outside of the #ifndef __ASSEMBLY__ section.
935  * Otherwise might lead to compilation errors in assembler files.
936  */
937 #include <asm/cache.h>
938 #endif
939 
940 /* Put only stuff here that the assembler can digest */
941 
942 #ifdef CONFIG_POST
943 #define CONFIG_HAS_POST
944 #ifndef CONFIG_POST_ALT_LIST
945 #define CONFIG_POST_STD_LIST
946 #endif
947 #endif
948 
949 #ifdef CONFIG_INIT_CRITICAL
950 #error CONFIG_INIT_CRITICAL is deprecated!
951 #error Read section CONFIG_SKIP_LOWLEVEL_INIT in README.
952 #endif
953 
954 #define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
955 
956 #define ROUND(a,b)		(((a) + (b) - 1) & ~((b) - 1))
957 #define DIV_ROUND(n,d)		(((n) + ((d)/2)) / (d))
958 #define DIV_ROUND_UP(n,d)	(((n) + (d) - 1) / (d))
959 #define roundup(x, y)		((((x) + ((y) - 1)) / (y)) * (y))
960 
961 /*
962  * Divide positive or negative dividend by positive divisor and round
963  * to closest integer. Result is undefined for negative divisors and
964  * for negative dividends if the divisor variable type is unsigned.
965  */
966 #define DIV_ROUND_CLOSEST(x, divisor)(			\
967 {							\
968 	typeof(x) __x = x;				\
969 	typeof(divisor) __d = divisor;			\
970 	(((typeof(x))-1) > 0 ||				\
971 	 ((typeof(divisor))-1) > 0 || (__x) > 0) ?	\
972 		(((__x) + ((__d) / 2)) / (__d)) :	\
973 		(((__x) - ((__d) / 2)) / (__d));	\
974 }							\
975 )
976 
977 #define ALIGN(x,a)		__ALIGN_MASK((x),(typeof(x))(a)-1)
978 #define __ALIGN_MASK(x,mask)	(((x)+(mask))&~(mask))
979 
980 /*
981  * ARCH_DMA_MINALIGN is defined in asm/cache.h for each architecture.  It
982  * is used to align DMA buffers.
983  */
984 #ifndef __ASSEMBLY__
985 #include <asm/cache.h>
986 #endif
987 
988 /*
989  * The ALLOC_CACHE_ALIGN_BUFFER macro is used to allocate a buffer on the
990  * stack that meets the minimum architecture alignment requirements for DMA.
991  * Such a buffer is useful for DMA operations where flushing and invalidating
992  * the cache before and after a read and/or write operation is required for
993  * correct operations.
994  *
995  * When called the macro creates an array on the stack that is sized such
996  * that:
997  *
998  * 1) The beginning of the array can be advanced enough to be aligned.
999  *
1000  * 2) The size of the aligned portion of the array is a multiple of the minimum
1001  *    architecture alignment required for DMA.
1002  *
1003  * 3) The aligned portion contains enough space for the original number of
1004  *    elements requested.
1005  *
1006  * The macro then creates a pointer to the aligned portion of this array and
1007  * assigns to the pointer the address of the first element in the aligned
1008  * portion of the array.
1009  *
1010  * Calling the macro as:
1011  *
1012  *     ALLOC_CACHE_ALIGN_BUFFER(uint32_t, buffer, 1024);
1013  *
1014  * Will result in something similar to saying:
1015  *
1016  *     uint32_t    buffer[1024];
1017  *
1018  * The following differences exist:
1019  *
1020  * 1) The resulting buffer is guaranteed to be aligned to the value of
1021  *    ARCH_DMA_MINALIGN.
1022  *
1023  * 2) The buffer variable created by the macro is a pointer to the specified
1024  *    type, and NOT an array of the specified type.  This can be very important
1025  *    if you want the address of the buffer, which you probably do, to pass it
1026  *    to the DMA hardware.  The value of &buffer is different in the two cases.
1027  *    In the macro case it will be the address of the pointer, not the address
1028  *    of the space reserved for the buffer.  However, in the second case it
1029  *    would be the address of the buffer.  So if you are replacing hard coded
1030  *    stack buffers with this macro you need to make sure you remove the & from
1031  *    the locations where you are taking the address of the buffer.
1032  *
1033  * Note that the size parameter is the number of array elements to allocate,
1034  * not the number of bytes.
1035  *
1036  * This macro can not be used outside of function scope, or for the creation
1037  * of a function scoped static buffer.  It can not be used to create a cache
1038  * line aligned global buffer.
1039  */
1040 #define PAD_COUNT(s, pad) (((s) - 1) / (pad) + 1)
1041 #define PAD_SIZE(s, pad) (PAD_COUNT(s, pad) * pad)
1042 #define ALLOC_ALIGN_BUFFER_PAD(type, name, size, align, pad)		\
1043 	char __##name[ROUND(PAD_SIZE((size) * sizeof(type), pad), align)  \
1044 		      + (align - 1)];					\
1045 									\
1046 	type *name = (type *) ALIGN((uintptr_t)__##name, align)
1047 #define ALLOC_ALIGN_BUFFER(type, name, size, align)		\
1048 	ALLOC_ALIGN_BUFFER_PAD(type, name, size, align, 1)
1049 #define ALLOC_CACHE_ALIGN_BUFFER_PAD(type, name, size, pad)		\
1050 	ALLOC_ALIGN_BUFFER_PAD(type, name, size, ARCH_DMA_MINALIGN, pad)
1051 #define ALLOC_CACHE_ALIGN_BUFFER(type, name, size)			\
1052 	ALLOC_ALIGN_BUFFER(type, name, size, ARCH_DMA_MINALIGN)
1053 
1054 /*
1055  * DEFINE_CACHE_ALIGN_BUFFER() is similar to ALLOC_CACHE_ALIGN_BUFFER, but it's
1056  * purpose is to allow allocating aligned buffers outside of function scope.
1057  * Usage of this macro shall be avoided or used with extreme care!
1058  */
1059 #define DEFINE_ALIGN_BUFFER(type, name, size, align)			\
1060 	static char __##name[roundup(size * sizeof(type), align)]	\
1061 			__aligned(align);				\
1062 									\
1063 	static type *name = (type *)__##name
1064 #define DEFINE_CACHE_ALIGN_BUFFER(type, name, size)			\
1065 	DEFINE_ALIGN_BUFFER(type, name, size, ARCH_DMA_MINALIGN)
1066 
1067 /* Pull in stuff for the build system */
1068 #ifdef DO_DEPS_ONLY
1069 # include <environment.h>
1070 #endif
1071 
1072 #endif	/* __COMMON_H_ */
1073