1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * (C) Copyright 2000-2009 4 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. 5 */ 6 7 #ifndef __COMMON_H_ 8 #define __COMMON_H_ 1 9 10 #ifndef __ASSEMBLY__ /* put C only stuff in this section */ 11 12 typedef unsigned char uchar; 13 typedef volatile unsigned long vu_long; 14 typedef volatile unsigned short vu_short; 15 typedef volatile unsigned char vu_char; 16 17 #include <config.h> 18 #include <errno.h> 19 #include <time.h> 20 #include <asm-offsets.h> 21 #include <linux/bitops.h> 22 #include <linux/bug.h> 23 #include <linux/delay.h> 24 #include <linux/types.h> 25 #include <linux/printk.h> 26 #include <linux/string.h> 27 #include <linux/stringify.h> 28 #include <asm/ptrace.h> 29 #include <stdarg.h> 30 #include <stdio.h> 31 #include <linux/kernel.h> 32 33 #include <part.h> 34 #include <flash.h> 35 #include <image.h> 36 37 #ifdef __LP64__ 38 #define CONFIG_SYS_SUPPORT_64BIT_DATA 39 #endif 40 41 #include <log.h> 42 43 typedef void (interrupt_handler_t)(void *); 44 45 #include <asm/u-boot.h> /* boot information for Linux kernel */ 46 #include <asm/global_data.h> /* global data used for startup functions */ 47 48 #if defined(CONFIG_ENV_IS_EMBEDDED) 49 #define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN 50 #elif ( ((CONFIG_ENV_ADDR+CONFIG_ENV_SIZE) < CONFIG_SYS_MONITOR_BASE) || \ 51 (CONFIG_ENV_ADDR >= (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)) ) || \ 52 defined(CONFIG_ENV_IS_IN_NVRAM) 53 #define TOTAL_MALLOC_LEN (CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE) 54 #else 55 #define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN 56 #endif 57 58 /* startup functions, used in: 59 * common/board_f.c 60 * common/init/board_init.c 61 * common/board_r.c 62 * common/board_info.c 63 */ 64 #include <init.h> 65 66 /* 67 * Function Prototypes 68 */ 69 void hang (void) __attribute__ ((noreturn)); 70 71 int cpu_init(void); 72 73 #include <display_options.h> 74 75 /* common/main.c */ 76 void main_loop (void); 77 int run_command(const char *cmd, int flag); 78 int run_command_repeatable(const char *cmd, int flag); 79 80 /** 81 * Run a list of commands separated by ; or even \0 82 * 83 * Note that if 'len' is not -1, then the command does not need to be nul 84 * terminated, Memory will be allocated for the command in that case. 85 * 86 * @param cmd List of commands to run, each separated bu semicolon 87 * @param len Length of commands excluding terminator if known (-1 if not) 88 * @param flag Execution flags (CMD_FLAG_...) 89 * @return 0 on success, or != 0 on error. 90 */ 91 int run_command_list(const char *cmd, int len, int flag); 92 93 int checkflash(void); 94 int checkdram(void); 95 extern u8 __dtb_dt_begin[]; /* embedded device tree blob */ 96 extern u8 __dtb_dt_spl_begin[]; /* embedded device tree blob for SPL/TPL */ 97 int mdm_init(void); 98 99 /** 100 * Show the DRAM size in a board-specific way 101 * 102 * This is used by boards to display DRAM information in their own way. 103 * 104 * @param size Size of DRAM (which should be displayed along with other info) 105 */ 106 void board_show_dram(phys_size_t size); 107 108 /** 109 * arch_fixup_fdt() - Write arch-specific information to fdt 110 * 111 * Defined in arch/$(ARCH)/lib/bootm-fdt.c 112 * 113 * @blob: FDT blob to write to 114 * @return 0 if ok, or -ve FDT_ERR_... on failure 115 */ 116 int arch_fixup_fdt(void *blob); 117 118 /* common/flash.c */ 119 void flash_perror (int); 120 121 /* common/cmd_source.c */ 122 int source (ulong addr, const char *fit_uname); 123 124 extern ulong load_addr; /* Default Load Address */ 125 extern ulong save_addr; /* Default Save Address */ 126 extern ulong save_size; /* Default Save Size */ 127 128 /* common/cmd_net.c */ 129 int do_tftpb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); 130 131 /* common/cmd_fat.c */ 132 int do_fat_fsload(cmd_tbl_t *, int, int, char * const []); 133 134 /* common/cmd_ext2.c */ 135 int do_ext2load(cmd_tbl_t *, int, int, char * const []); 136 137 /* common/cmd_nvedit.c */ 138 int env_init (void); 139 void env_relocate (void); 140 int envmatch (uchar *, int); 141 142 /** 143 * env_get() - Look up the value of an environment variable 144 * 145 * In U-Boot proper this can be called before relocation (which is when the 146 * environment is loaded from storage, i.e. GD_FLG_ENV_READY is 0). In that 147 * case this function calls env_get_f(). 148 * 149 * @varname: Variable to look up 150 * @return value of variable, or NULL if not found 151 */ 152 char *env_get(const char *varname); 153 154 /** 155 * env_get_f() - Look up the value of an environment variable (early) 156 * 157 * This function is called from env_get() if the environment has not been 158 * loaded yet (GD_FLG_ENV_READY flag is 0). Some environment locations will 159 * support reading the value (slowly) and some will not. 160 * 161 * @varname: Variable to look up 162 * @return value of variable, or NULL if not found 163 */ 164 int env_get_f(const char *name, char *buf, unsigned len); 165 166 /** 167 * env_get_ulong() - Return an environment variable as an integer value 168 * 169 * Most U-Boot environment variables store hex values. For those which store 170 * (e.g.) base-10 integers, this function can be used to read the value. 171 * 172 * @name: Variable to look up 173 * @base: Base to use (e.g. 10 for base 10, 2 for binary) 174 * @default_val: Default value to return if no value is found 175 * @return the value found, or @default_val if none 176 */ 177 ulong env_get_ulong(const char *name, int base, ulong default_val); 178 179 /** 180 * env_get_hex() - Return an environment variable as a hex value 181 * 182 * Decode an environment as a hex number (it may or may not have a 0x 183 * prefix). If the environment variable cannot be found, or does not start 184 * with hex digits, the default value is returned. 185 * 186 * @varname: Variable to decode 187 * @default_val: Value to return on error 188 */ 189 ulong env_get_hex(const char *varname, ulong default_val); 190 191 /* 192 * Read an environment variable as a boolean 193 * Return -1 if variable does not exist (default to true) 194 */ 195 int env_get_yesno(const char *var); 196 197 /** 198 * env_set() - set an environment variable 199 * 200 * This sets or deletes the value of an environment variable. For setting the 201 * value the variable is created if it does not already exist. 202 * 203 * @varname: Variable to adjust 204 * @value: Value to set for the variable, or NULL or "" to delete the variable 205 * @return 0 if OK, 1 on error 206 */ 207 int env_set(const char *varname, const char *value); 208 209 /** 210 * env_set_ulong() - set an environment variable to an integer 211 * 212 * @varname: Variable to adjust 213 * @value: Value to set for the variable (will be converted to a string) 214 * @return 0 if OK, 1 on error 215 */ 216 int env_set_ulong(const char *varname, ulong value); 217 218 /** 219 * env_set_hex() - set an environment variable to a hex value 220 * 221 * @varname: Variable to adjust 222 * @value: Value to set for the variable (will be converted to a hex string) 223 * @return 0 if OK, 1 on error 224 */ 225 int env_set_hex(const char *varname, ulong value); 226 227 /** 228 * env_set_addr - Set an environment variable to an address in hex 229 * 230 * @varname: Environment variable to set 231 * @addr: Value to set it to 232 * @return 0 if ok, 1 on error 233 */ 234 static inline int env_set_addr(const char *varname, const void *addr) 235 { 236 return env_set_hex(varname, (ulong)addr); 237 } 238 239 #ifdef CONFIG_AUTO_COMPLETE 240 int env_complete(char *var, int maxv, char *cmdv[], int maxsz, char *buf); 241 #endif 242 int get_env_id (void); 243 244 void pci_init_board(void); 245 246 /* common/exports.c */ 247 void jumptable_init(void); 248 249 /* common/kallsysm.c */ 250 const char *symbol_lookup(unsigned long addr, unsigned long *caddr); 251 252 /* common/memsize.c */ 253 long get_ram_size (long *, long); 254 phys_size_t get_effective_memsize(void); 255 256 /* $(BOARD)/$(BOARD).c */ 257 void reset_phy (void); 258 void fdc_hw_init (void); 259 260 /* $(BOARD)/eeprom.c */ 261 #ifdef CONFIG_CMD_EEPROM 262 void eeprom_init (int bus); 263 int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt); 264 int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt); 265 #else 266 /* 267 * Some EEPROM code is depecated because it used the legacy I2C interface. Add 268 * some macros here so we don't have to touch every one of those uses 269 */ 270 #define eeprom_init(bus) 271 #define eeprom_read(dev_addr, offset, buffer, cnt) ((void)-ENOSYS) 272 #define eeprom_write(dev_addr, offset, buffer, cnt) ((void)-ENOSYS) 273 #endif 274 275 #if !defined(CONFIG_ENV_EEPROM_IS_ON_I2C) && defined(CONFIG_SYS_I2C_EEPROM_ADDR) 276 # define CONFIG_SYS_DEF_EEPROM_ADDR CONFIG_SYS_I2C_EEPROM_ADDR 277 #endif 278 279 /* $(BOARD)/$(BOARD).c */ 280 int board_early_init_f (void); 281 int board_fix_fdt (void *rw_fdt_blob); /* manipulate the U-Boot fdt before its relocation */ 282 int board_late_init (void); 283 int board_postclk_init (void); /* after clocks/timebase, before env/serial */ 284 int board_early_init_r (void); 285 286 #if defined(CONFIG_SYS_DRAM_TEST) 287 int testdram(void); 288 #endif /* CONFIG_SYS_DRAM_TEST */ 289 290 /* $(CPU)/start.S */ 291 int icache_status (void); 292 void icache_enable (void); 293 void icache_disable(void); 294 int dcache_status (void); 295 void dcache_enable (void); 296 void dcache_disable(void); 297 void mmu_disable(void); 298 #if defined(CONFIG_ARM) 299 void relocate_code(ulong); 300 #else 301 void relocate_code(ulong, gd_t *, ulong) __attribute__ ((noreturn)); 302 #endif 303 ulong get_endaddr (void); 304 void trap_init (ulong); 305 306 /* $(CPU)/cpu.c */ 307 static inline int cpumask_next(int cpu, unsigned int mask) 308 { 309 for (cpu++; !((1 << cpu) & mask); cpu++) 310 ; 311 312 return cpu; 313 } 314 315 #define for_each_cpu(iter, cpu, num_cpus, mask) \ 316 for (iter = 0, cpu = cpumask_next(-1, mask); \ 317 iter < num_cpus; \ 318 iter++, cpu = cpumask_next(cpu, mask)) \ 319 320 int cpu_numcores (void); 321 int cpu_num_dspcores(void); 322 u32 cpu_mask (void); 323 u32 cpu_dsp_mask(void); 324 int is_core_valid (unsigned int); 325 326 void s_init(void); 327 328 int checkcpu (void); 329 int checkicache (void); 330 int checkdcache (void); 331 void upmconfig (unsigned int, unsigned int *, unsigned int); 332 ulong get_tbclk (void); 333 void reset_misc (void); 334 void reset_cpu (ulong addr); 335 void ft_cpu_setup(void *blob, bd_t *bd); 336 void ft_pci_setup(void *blob, bd_t *bd); 337 338 void smp_set_core_boot_addr(unsigned long addr, int corenr); 339 void smp_kick_all_cpus(void); 340 341 /* $(CPU)/serial.c */ 342 int serial_init (void); 343 void serial_setbrg (void); 344 void serial_putc (const char); 345 void serial_putc_raw(const char); 346 void serial_puts (const char *); 347 int serial_getc (void); 348 int serial_tstc (void); 349 int serial_setconfig(uint config); 350 351 /* $(CPU)/speed.c */ 352 int get_clocks (void); 353 ulong get_bus_freq (ulong); 354 int get_serial_clock(void); 355 356 /* $(CPU)/interrupts.c */ 357 int interrupt_init (void); 358 void timer_interrupt (struct pt_regs *); 359 void external_interrupt (struct pt_regs *); 360 void irq_install_handler(int, interrupt_handler_t *, void *); 361 void irq_free_handler (int); 362 void reset_timer (void); 363 364 /* Return value of monotonic microsecond timer */ 365 unsigned long timer_get_us(void); 366 367 void enable_interrupts (void); 368 int disable_interrupts (void); 369 370 /* $(CPU)/.../commproc.c */ 371 int dpram_init (void); 372 uint dpram_base(void); 373 uint dpram_base_align(uint align); 374 uint dpram_alloc(uint size); 375 uint dpram_alloc_align(uint size,uint align); 376 void bootcount_store (ulong); 377 ulong bootcount_load (void); 378 379 /* $(CPU)/.../<eth> */ 380 void mii_init (void); 381 382 /* $(CPU)/.../lcd.c */ 383 ulong lcd_setmem (ulong); 384 385 /* $(CPU)/.../video.c */ 386 ulong video_setmem (ulong); 387 388 /* arch/$(ARCH)/lib/cache.c */ 389 void enable_caches(void); 390 void flush_cache (unsigned long, unsigned long); 391 void flush_dcache_all(void); 392 void flush_dcache_range(unsigned long start, unsigned long stop); 393 void invalidate_dcache_range(unsigned long start, unsigned long stop); 394 void invalidate_dcache_all(void); 395 void invalidate_icache_all(void); 396 397 enum { 398 /* Disable caches (else flush caches but leave them active) */ 399 CBL_DISABLE_CACHES = 1 << 0, 400 CBL_SHOW_BOOTSTAGE_REPORT = 1 << 1, 401 402 CBL_ALL = 3, 403 }; 404 405 /** 406 * Clean up ready for linux 407 * 408 * @param flags Flags to control what is done 409 */ 410 int cleanup_before_linux_select(int flags); 411 412 /* arch/$(ARCH)/lib/ticks.S */ 413 uint64_t get_ticks(void); 414 void wait_ticks (unsigned long); 415 416 /* arch/$(ARCH)/lib/time.c */ 417 ulong usec2ticks (unsigned long usec); 418 ulong ticks2usec (unsigned long ticks); 419 420 /* lib/gunzip.c */ 421 int gzip_parse_header(const unsigned char *src, unsigned long len); 422 int gunzip(void *, int, unsigned char *, unsigned long *); 423 int zunzip(void *dst, int dstlen, unsigned char *src, unsigned long *lenp, 424 int stoponerr, int offset); 425 426 /** 427 * gzwrite progress indicators: defined weak to allow board-specific 428 * overrides: 429 * 430 * gzwrite_progress_init called on startup 431 * gzwrite_progress called during decompress/write loop 432 * gzwrite_progress_finish called at end of loop to 433 * indicate success (retcode=0) or failure 434 */ 435 void gzwrite_progress_init(u64 expected_size); 436 437 void gzwrite_progress(int iteration, 438 u64 bytes_written, 439 u64 total_bytes); 440 441 void gzwrite_progress_finish(int retcode, 442 u64 totalwritten, 443 u64 totalsize, 444 u32 expected_crc, 445 u32 calculated_crc); 446 447 /** 448 * decompress and write gzipped image from memory to block device 449 * 450 * @param src compressed image address 451 * @param len compressed image length in bytes 452 * @param dev block device descriptor 453 * @param szwritebuf bytes per write (pad to erase size) 454 * @param startoffs offset in bytes of first write 455 * @param szexpected expected uncompressed length 456 * may be zero to use gzip trailer 457 * for files under 4GiB 458 */ 459 int gzwrite(unsigned char *src, int len, 460 struct blk_desc *dev, 461 unsigned long szwritebuf, 462 u64 startoffs, 463 u64 szexpected); 464 465 /* lib/lz4_wrapper.c */ 466 int ulz4fn(const void *src, size_t srcn, void *dst, size_t *dstn); 467 468 /* lib/qsort.c */ 469 void qsort(void *base, size_t nmemb, size_t size, 470 int(*compar)(const void *, const void *)); 471 int strcmp_compar(const void *, const void *); 472 473 /* lib/uuid.c */ 474 #include <uuid.h> 475 476 /* lib/vsprintf.c */ 477 #include <vsprintf.h> 478 479 /* lib/strmhz.c */ 480 char * strmhz(char *buf, unsigned long hz); 481 482 /* lib/crc32.c */ 483 #include <u-boot/crc.h> 484 485 /* lib/rand.c */ 486 #define RAND_MAX -1U 487 void srand(unsigned int seed); 488 unsigned int rand(void); 489 unsigned int rand_r(unsigned int *seedp); 490 491 /* 492 * STDIO based functions (can always be used) 493 */ 494 /* serial stuff */ 495 int serial_printf (const char *fmt, ...) 496 __attribute__ ((format (__printf__, 1, 2))); 497 498 /* lib/gzip.c */ 499 int gzip(void *dst, unsigned long *lenp, 500 unsigned char *src, unsigned long srclen); 501 int zzip(void *dst, unsigned long *lenp, unsigned char *src, 502 unsigned long srclen, int stoponerr, 503 int (*func)(unsigned long, unsigned long)); 504 505 /* lib/net_utils.c */ 506 #include <net.h> 507 static inline struct in_addr env_get_ip(char *var) 508 { 509 return string_to_ip(env_get(var)); 510 } 511 512 int pcmcia_init (void); 513 514 #ifdef CONFIG_LED_STATUS 515 # include <status_led.h> 516 #endif 517 518 #include <bootstage.h> 519 520 #ifdef CONFIG_SHOW_ACTIVITY 521 void show_activity(int arg); 522 #endif 523 524 /* Multicore arch functions */ 525 #ifdef CONFIG_MP 526 int cpu_status(u32 nr); 527 int cpu_reset(u32 nr); 528 int cpu_disable(u32 nr); 529 int cpu_release(u32 nr, int argc, char * const argv[]); 530 #endif 531 532 #else /* __ASSEMBLY__ */ 533 534 #endif /* __ASSEMBLY__ */ 535 536 /* Put only stuff here that the assembler can digest */ 537 538 #ifdef CONFIG_POST 539 #define CONFIG_HAS_POST 540 #ifndef CONFIG_POST_ALT_LIST 541 #define CONFIG_POST_STD_LIST 542 #endif 543 #endif 544 545 #ifdef CONFIG_INIT_CRITICAL 546 #error CONFIG_INIT_CRITICAL is deprecated! 547 #error Read section CONFIG_SKIP_LOWLEVEL_INIT in README. 548 #endif 549 550 #define ROUND(a,b) (((a) + (b) - 1) & ~((b) - 1)) 551 552 /* 553 * check_member() - Check the offset of a structure member 554 * 555 * @structure: Name of structure (e.g. global_data) 556 * @member: Name of member (e.g. baudrate) 557 * @offset: Expected offset in bytes 558 */ 559 #define check_member(structure, member, offset) _Static_assert( \ 560 offsetof(struct structure, member) == offset, \ 561 "`struct " #structure "` offset for `" #member "` is not " #offset) 562 563 /* Avoid using CONFIG_EFI_STUB directly as we may boot from other loaders */ 564 #ifdef CONFIG_EFI_STUB 565 #define ll_boot_init() false 566 #else 567 #define ll_boot_init() true 568 #endif 569 570 /* Pull in stuff for the build system */ 571 #ifdef DO_DEPS_ONLY 572 # include <environment.h> 573 #endif 574 575 #endif /* __COMMON_H_ */ 576