xref: /openbmc/u-boot/include/common.h (revision 22433fc5)
1 /*
2  * (C) Copyright 2000-2009
3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4  *
5  * SPDX-License-Identifier:	GPL-2.0+
6  */
7 
8 #ifndef __COMMON_H_
9 #define __COMMON_H_	1
10 
11 #ifndef __ASSEMBLY__		/* put C only stuff in this section */
12 
13 typedef unsigned char		uchar;
14 typedef volatile unsigned long	vu_long;
15 typedef volatile unsigned short vu_short;
16 typedef volatile unsigned char	vu_char;
17 
18 #include <config.h>
19 #include <asm-offsets.h>
20 #include <linux/bitops.h>
21 #include <linux/types.h>
22 #include <linux/string.h>
23 #include <linux/stringify.h>
24 #include <asm/ptrace.h>
25 #include <stdarg.h>
26 #if defined(CONFIG_PCI) && defined(CONFIG_4xx)
27 #include <pci.h>
28 #endif
29 #if defined(CONFIG_8xx)
30 #include <asm/8xx_immap.h>
31 #if defined(CONFIG_MPC852)	|| defined(CONFIG_MPC852T)	|| \
32     defined(CONFIG_MPC859)	|| defined(CONFIG_MPC859T)	|| \
33     defined(CONFIG_MPC859DSL)	|| \
34     defined(CONFIG_MPC866)	|| defined(CONFIG_MPC866T)	|| \
35     defined(CONFIG_MPC866P)
36 # define CONFIG_MPC866_FAMILY 1
37 #elif defined(CONFIG_MPC870) \
38    || defined(CONFIG_MPC875) \
39    || defined(CONFIG_MPC880) \
40    || defined(CONFIG_MPC885)
41 # define CONFIG_MPC885_FAMILY   1
42 #endif
43 #if   defined(CONFIG_MPC860)	   \
44    || defined(CONFIG_MPC860T)	   \
45    || defined(CONFIG_MPC866_FAMILY) \
46    || defined(CONFIG_MPC885_FAMILY)
47 # define CONFIG_MPC86x 1
48 #endif
49 #elif defined(CONFIG_5xx)
50 #include <asm/5xx_immap.h>
51 #elif defined(CONFIG_MPC5xxx)
52 #include <mpc5xxx.h>
53 #elif defined(CONFIG_MPC512X)
54 #include <asm/immap_512x.h>
55 #elif defined(CONFIG_8260)
56 #if   defined(CONFIG_MPC8247) \
57    || defined(CONFIG_MPC8248) \
58    || defined(CONFIG_MPC8271) \
59    || defined(CONFIG_MPC8272)
60 #define CONFIG_MPC8272_FAMILY	1
61 #endif
62 #if defined(CONFIG_MPC8272_FAMILY)
63 #define CONFIG_MPC8260	1
64 #endif
65 #include <asm/immap_8260.h>
66 #endif
67 #ifdef CONFIG_MPC86xx
68 #include <mpc86xx.h>
69 #include <asm/immap_86xx.h>
70 #endif
71 #ifdef CONFIG_MPC85xx
72 #include <mpc85xx.h>
73 #include <asm/immap_85xx.h>
74 #endif
75 #ifdef CONFIG_MPC83xx
76 #include <mpc83xx.h>
77 #include <asm/immap_83xx.h>
78 #endif
79 #ifdef	CONFIG_4xx
80 #include <asm/ppc4xx.h>
81 #endif
82 #ifdef CONFIG_HYMOD
83 #include <board/hymod/hymod.h>
84 #endif
85 #ifdef CONFIG_ARM
86 #define asmlinkage	/* nothing */
87 #endif
88 #ifdef CONFIG_BLACKFIN
89 #include <asm/blackfin.h>
90 #endif
91 #ifdef CONFIG_SOC_DA8XX
92 #include <asm/arch/hardware.h>
93 #endif
94 
95 #include <part.h>
96 #include <flash.h>
97 #include <image.h>
98 
99 #ifdef DEBUG
100 #define _DEBUG	1
101 #else
102 #define _DEBUG	0
103 #endif
104 
105 /*
106  * Output a debug text when condition "cond" is met. The "cond" should be
107  * computed by a preprocessor in the best case, allowing for the best
108  * optimization.
109  */
110 #define debug_cond(cond, fmt, args...)		\
111 	do {					\
112 		if (cond)			\
113 			printf(fmt, ##args);	\
114 	} while (0)
115 
116 #define debug(fmt, args...)			\
117 	debug_cond(_DEBUG, fmt, ##args)
118 
119 /*
120  * An assertion is run-time check done in debug mode only. If DEBUG is not
121  * defined then it is skipped. If DEBUG is defined and the assertion fails,
122  * then it calls panic*( which may or may not reset/halt U-Boot (see
123  * CONFIG_PANIC_HANG), It is hoped that all failing assertions are found
124  * before release, and after release it is hoped that they don't matter. But
125  * in any case these failing assertions cannot be fixed with a reset (which
126  * may just do the same assertion again).
127  */
128 void __assert_fail(const char *assertion, const char *file, unsigned line,
129 		   const char *function);
130 #define assert(x) \
131 	({ if (!(x) && _DEBUG) \
132 		__assert_fail(#x, __FILE__, __LINE__, __func__); })
133 
134 #define error(fmt, args...) do {					\
135 		printf("ERROR: " fmt "\nat %s:%d/%s()\n",		\
136 			##args, __FILE__, __LINE__, __func__);		\
137 } while (0)
138 
139 #ifndef BUG
140 #define BUG() do { \
141 	printf("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __FUNCTION__); \
142 	panic("BUG!"); \
143 } while (0)
144 #define BUG_ON(condition) do { if (unlikely((condition)!=0)) BUG(); } while(0)
145 #endif /* BUG */
146 
147 /* Force a compilation error if condition is true */
148 #define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)]))
149 
150 typedef void (interrupt_handler_t)(void *);
151 
152 #include <asm/u-boot.h> /* boot information for Linux kernel */
153 #include <asm/global_data.h>	/* global data used for startup functions */
154 
155 /*
156  * enable common handling for all TQM8xxL/M boards:
157  * - CONFIG_TQM8xxM will be defined for all TQM8xxM boards
158  * - CONFIG_TQM8xxL will be defined for all TQM8xxL _and_ TQM8xxM boards
159  *                  and for the TQM885D board
160  */
161 #if defined(CONFIG_TQM823M) || defined(CONFIG_TQM850M) || \
162     defined(CONFIG_TQM855M) || defined(CONFIG_TQM860M) || \
163     defined(CONFIG_TQM862M) || defined(CONFIG_TQM866M)
164 # ifndef CONFIG_TQM8xxM
165 #  define CONFIG_TQM8xxM
166 # endif
167 #endif
168 #if defined(CONFIG_TQM823L) || defined(CONFIG_TQM850L) || \
169     defined(CONFIG_TQM855L) || defined(CONFIG_TQM860L) || \
170     defined(CONFIG_TQM862L) || defined(CONFIG_TQM8xxM) || \
171     defined(CONFIG_TQM885D)
172 # ifndef CONFIG_TQM8xxL
173 #  define CONFIG_TQM8xxL
174 # endif
175 #endif
176 
177 /*
178  * General Purpose Utilities
179  */
180 #define min(X, Y)				\
181 	({ typeof(X) __x = (X);			\
182 		typeof(Y) __y = (Y);		\
183 		(__x < __y) ? __x : __y; })
184 
185 #define max(X, Y)				\
186 	({ typeof(X) __x = (X);			\
187 		typeof(Y) __y = (Y);		\
188 		(__x > __y) ? __x : __y; })
189 
190 #define MIN(x, y)  min(x, y)
191 #define MAX(x, y)  max(x, y)
192 
193 #define min3(X, Y, Z)				\
194 	({ typeof(X) __x = (X);			\
195 		typeof(Y) __y = (Y);		\
196 		typeof(Z) __z = (Z);		\
197 		__x < __y ? (__x < __z ? __x : __z) :	\
198 		(__y < __z ? __y : __z); })
199 
200 #define max3(X, Y, Z)				\
201 	({ typeof(X) __x = (X);			\
202 		typeof(Y) __y = (Y);		\
203 		typeof(Z) __z = (Z);		\
204 		__x > __y ? (__x > __z ? __x : __z) :	\
205 		(__y > __z ? __y : __z); })
206 
207 #define MIN3(x, y, z)  min3(x, y, z)
208 #define MAX3(x, y, z)  max3(x, y, z)
209 
210 /*
211  * Return the absolute value of a number.
212  *
213  * This handles unsigned and signed longs, ints, shorts and chars.  For all
214  * input types abs() returns a signed long.
215  *
216  * For 64-bit types, use abs64()
217  */
218 #define abs(x) ({						\
219 		long ret;					\
220 		if (sizeof(x) == sizeof(long)) {		\
221 			long __x = (x);				\
222 			ret = (__x < 0) ? -__x : __x;		\
223 		} else {					\
224 			int __x = (x);				\
225 			ret = (__x < 0) ? -__x : __x;		\
226 		}						\
227 		ret;						\
228 	})
229 
230 #define abs64(x) ({				\
231 		s64 __x = (x);			\
232 		(__x < 0) ? -__x : __x;		\
233 	})
234 
235 #if defined(CONFIG_ENV_IS_EMBEDDED)
236 #define TOTAL_MALLOC_LEN	CONFIG_SYS_MALLOC_LEN
237 #elif ( ((CONFIG_ENV_ADDR+CONFIG_ENV_SIZE) < CONFIG_SYS_MONITOR_BASE) || \
238 	(CONFIG_ENV_ADDR >= (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)) ) || \
239       defined(CONFIG_ENV_IS_IN_NVRAM)
240 #define	TOTAL_MALLOC_LEN	(CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE)
241 #else
242 #define	TOTAL_MALLOC_LEN	CONFIG_SYS_MALLOC_LEN
243 #endif
244 
245 /**
246  * container_of - cast a member of a structure out to the containing structure
247  * @ptr:	the pointer to the member.
248  * @type:	the type of the container struct this is embedded in.
249  * @member:	the name of the member within the struct.
250  *
251  */
252 #define container_of(ptr, type, member) ({			\
253 	const typeof( ((type *)0)->member ) *__mptr = (ptr);	\
254 	(type *)( (char *)__mptr - offsetof(type,member) );})
255 
256 /*
257  * Function Prototypes
258  */
259 
260 void	hang		(void) __attribute__ ((noreturn));
261 
262 int	timer_init(void);
263 int	cpu_init(void);
264 
265 /* */
266 phys_size_t initdram (int);
267 int	display_options (void);
268 void	print_size(unsigned long long, const char *);
269 int print_buffer(ulong addr, const void *data, uint width, uint count,
270 		 uint linelen);
271 
272 /* common/main.c */
273 void	main_loop	(void);
274 int run_command(const char *cmd, int flag);
275 
276 /**
277  * Run a list of commands separated by ; or even \0
278  *
279  * Note that if 'len' is not -1, then the command does not need to be nul
280  * terminated, Memory will be allocated for the command in that case.
281  *
282  * @param cmd	List of commands to run, each separated bu semicolon
283  * @param len	Length of commands excluding terminator if known (-1 if not)
284  * @param flag	Execution flags (CMD_FLAG_...)
285  * @return 0 on success, or != 0 on error.
286  */
287 int run_command_list(const char *cmd, int len, int flag);
288 int	readline	(const char *const prompt);
289 int	readline_into_buffer(const char *const prompt, char *buffer,
290 			int timeout);
291 int	parse_line (char *, char *[]);
292 void	init_cmd_timeout(void);
293 void	reset_cmd_timeout(void);
294 extern char console_buffer[];
295 
296 /* arch/$(ARCH)/lib/board.c */
297 void	board_init_f(ulong);
298 void	board_init_r  (gd_t *, ulong) __attribute__ ((noreturn));
299 int	checkboard    (void);
300 int	checkflash    (void);
301 int	checkdram     (void);
302 int	last_stage_init(void);
303 extern ulong monitor_flash_len;
304 int mac_read_from_eeprom(void);
305 extern u8 _binary_dt_dtb_start[];	/* embedded device tree blob */
306 int set_cpu_clk_info(void);
307 int print_cpuinfo(void);
308 int update_flash_size(int flash_size);
309 
310 /**
311  * Show the DRAM size in a board-specific way
312  *
313  * This is used by boards to display DRAM information in their own way.
314  *
315  * @param size	Size of DRAM (which should be displayed along with other info)
316  */
317 void board_show_dram(ulong size);
318 
319 /**
320  * arch_fixup_memory_node() - Write arch-specific memory information to fdt
321  *
322  * Defined in arch/$(ARCH)/lib/bootm.c
323  *
324  * @blob:	FDT blob to write to
325  * @return 0 if ok, or -ve FDT_ERR_... on failure
326  */
327 int arch_fixup_memory_node(void *blob);
328 
329 /* common/flash.c */
330 void flash_perror (int);
331 
332 /* common/cmd_source.c */
333 int	source (ulong addr, const char *fit_uname);
334 
335 extern ulong load_addr;		/* Default Load Address */
336 extern ulong save_addr;		/* Default Save Address */
337 extern ulong save_size;		/* Default Save Size */
338 
339 /* common/cmd_doc.c */
340 void	doc_probe(unsigned long physadr);
341 
342 /* common/cmd_net.c */
343 int do_tftpb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
344 
345 /* common/cmd_fat.c */
346 int do_fat_fsload(cmd_tbl_t *, int, int, char * const []);
347 
348 /* common/cmd_ext2.c */
349 int do_ext2load(cmd_tbl_t *, int, int, char * const []);
350 
351 /* common/cmd_nvedit.c */
352 int	env_init     (void);
353 void	env_relocate (void);
354 int	envmatch     (uchar *, int);
355 char	*getenv	     (const char *);
356 int	getenv_f     (const char *name, char *buf, unsigned len);
357 ulong getenv_ulong(const char *name, int base, ulong default_val);
358 
359 /**
360  * getenv_hex() - Return an environment variable as a hex value
361  *
362  * Decode an environment as a hex number (it may or may not have a 0x
363  * prefix). If the environment variable cannot be found, or does not start
364  * with hex digits, the default value is returned.
365  *
366  * @varname:		Variable to decode
367  * @default_val:	Value to return on error
368  */
369 ulong getenv_hex(const char *varname, ulong default_val);
370 
371 /*
372  * Read an environment variable as a boolean
373  * Return -1 if variable does not exist (default to true)
374  */
375 int getenv_yesno(const char *var);
376 int	saveenv	     (void);
377 int	setenv	     (const char *, const char *);
378 int setenv_ulong(const char *varname, ulong value);
379 int setenv_hex(const char *varname, ulong value);
380 /**
381  * setenv_addr - Set an environment variable to an address in hex
382  *
383  * @varname:	Environment variable to set
384  * @addr:	Value to set it to
385  * @return 0 if ok, 1 on error
386  */
387 static inline int setenv_addr(const char *varname, const void *addr)
388 {
389 	return setenv_hex(varname, (ulong)addr);
390 }
391 
392 #ifdef CONFIG_ARM
393 # include <asm/mach-types.h>
394 # include <asm/setup.h>
395 # include <asm/u-boot-arm.h>	/* ARM version to be fixed! */
396 #endif /* CONFIG_ARM */
397 #ifdef CONFIG_X86		/* x86 version to be fixed! */
398 # include <asm/u-boot-x86.h>
399 #endif /* CONFIG_X86 */
400 #ifdef CONFIG_SANDBOX
401 # include <asm/u-boot-sandbox.h>	/* TODO(sjg) what needs to be fixed? */
402 #endif
403 #ifdef CONFIG_NDS32
404 # include <asm/mach-types.h>
405 # include <asm/setup.h>
406 # include <asm/u-boot-nds32.h>
407 #endif /* CONFIG_NDS32 */
408 #ifdef CONFIG_MIPS
409 # include <asm/u-boot-mips.h>
410 #endif /* CONFIG_MIPS */
411 #ifdef CONFIG_ARC
412 # include <asm/u-boot-arc.h>
413 #endif /* CONFIG_ARC */
414 
415 #ifdef CONFIG_AUTO_COMPLETE
416 int env_complete(char *var, int maxv, char *cmdv[], int maxsz, char *buf);
417 #endif
418 int get_env_id (void);
419 
420 void	pci_init      (void);
421 void	pci_init_board(void);
422 void	pciinfo	      (int, int);
423 
424 #if defined(CONFIG_PCI) && defined(CONFIG_4xx)
425     int	   pci_pre_init	       (struct pci_controller *);
426     int	   is_pci_host	       (struct pci_controller *);
427 #endif
428 
429 #if defined(CONFIG_PCI) && (defined(CONFIG_440) || defined(CONFIG_405EX))
430 #   if defined(CONFIG_SYS_PCI_TARGET_INIT)
431 	void	pci_target_init	     (struct pci_controller *);
432 #   endif
433 #   if defined(CONFIG_SYS_PCI_MASTER_INIT)
434 	void	pci_master_init	     (struct pci_controller *);
435 #   endif
436 #if defined(CONFIG_440SPE) || \
437     defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
438     defined(CONFIG_405EX)
439    void pcie_setup_hoses(int busno);
440 #endif
441 #endif
442 
443 int	misc_init_f   (void);
444 int	misc_init_r   (void);
445 
446 /* common/exports.c */
447 void	jumptable_init(void);
448 
449 /* common/kallsysm.c */
450 const char *symbol_lookup(unsigned long addr, unsigned long *caddr);
451 
452 /* api/api.c */
453 void	api_init (void);
454 
455 /* common/memsize.c */
456 long	get_ram_size  (long *, long);
457 
458 /* $(BOARD)/$(BOARD).c */
459 void	reset_phy     (void);
460 void	fdc_hw_init   (void);
461 
462 /* $(BOARD)/eeprom.c */
463 void eeprom_init  (void);
464 #ifndef CONFIG_SPI
465 int  eeprom_probe (unsigned dev_addr, unsigned offset);
466 #endif
467 int  eeprom_read  (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
468 int  eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt);
469 #ifdef CONFIG_LWMON
470 extern uchar pic_read  (uchar reg);
471 extern void  pic_write (uchar reg, uchar val);
472 #endif
473 
474 /*
475  * Set this up regardless of board
476  * type, to prevent errors.
477  */
478 #if defined(CONFIG_SPI) || !defined(CONFIG_SYS_I2C_EEPROM_ADDR)
479 # define CONFIG_SYS_DEF_EEPROM_ADDR 0
480 #else
481 #if !defined(CONFIG_ENV_EEPROM_IS_ON_I2C)
482 # define CONFIG_SYS_DEF_EEPROM_ADDR CONFIG_SYS_I2C_EEPROM_ADDR
483 #endif
484 #endif /* CONFIG_SPI || !defined(CONFIG_SYS_I2C_EEPROM_ADDR) */
485 
486 #if defined(CONFIG_SPI)
487 extern void spi_init_f (void);
488 extern void spi_init_r (void);
489 extern ssize_t spi_read	 (uchar *, int, uchar *, int);
490 extern ssize_t spi_write (uchar *, int, uchar *, int);
491 #endif
492 
493 #ifdef CONFIG_RPXCLASSIC
494 void rpxclassic_init (void);
495 #endif
496 
497 void rpxlite_init (void);
498 
499 #ifdef CONFIG_MBX
500 /* $(BOARD)/mbx8xx.c */
501 void	mbx_init (void);
502 void	board_serial_init (void);
503 void	board_ether_init (void);
504 #endif
505 
506 #ifdef CONFIG_HERMES
507 /* $(BOARD)/hermes.c */
508 void hermes_start_lxt980 (int speed);
509 #endif
510 
511 #ifdef CONFIG_EVB64260
512 void  evb64260_init(void);
513 void  debug_led(int, int);
514 void  display_mem_map(void);
515 void  perform_soft_reset(void);
516 #endif
517 
518 /* $(BOARD)/$(BOARD).c */
519 int board_early_init_f (void);
520 int board_late_init (void);
521 int board_postclk_init (void); /* after clocks/timebase, before env/serial */
522 int board_early_init_r (void);
523 void board_poweroff (void);
524 
525 #if defined(CONFIG_SYS_DRAM_TEST)
526 int testdram(void);
527 #endif /* CONFIG_SYS_DRAM_TEST */
528 
529 /* $(CPU)/start.S */
530 #if defined(CONFIG_5xx) || \
531     defined(CONFIG_8xx)
532 uint	get_immr      (uint);
533 #endif
534 uint	get_pir	      (void);
535 #if defined(CONFIG_MPC5xxx)
536 uint	get_svr       (void);
537 #endif
538 uint	get_pvr	      (void);
539 uint	get_svr	      (void);
540 uint	rd_ic_cst     (void);
541 void	wr_ic_cst     (uint);
542 void	wr_ic_adr     (uint);
543 uint	rd_dc_cst     (void);
544 void	wr_dc_cst     (uint);
545 void	wr_dc_adr     (uint);
546 int	icache_status (void);
547 void	icache_enable (void);
548 void	icache_disable(void);
549 int	dcache_status (void);
550 void	dcache_enable (void);
551 void	dcache_disable(void);
552 void	mmu_disable(void);
553 #if defined(CONFIG_ARM)
554 void	relocate_code(ulong);
555 #else
556 void	relocate_code(ulong, gd_t *, ulong) __attribute__ ((noreturn));
557 #endif
558 ulong	get_endaddr   (void);
559 void	trap_init     (ulong);
560 #if defined (CONFIG_4xx)	|| \
561     defined (CONFIG_MPC5xxx)	|| \
562     defined (CONFIG_74xx_7xx)	|| \
563     defined (CONFIG_74x)	|| \
564     defined (CONFIG_75x)	|| \
565     defined (CONFIG_74xx)	|| \
566     defined (CONFIG_MPC85xx)	|| \
567     defined (CONFIG_MPC86xx)	|| \
568     defined (CONFIG_MPC83xx)
569 unsigned char	in8(unsigned int);
570 void		out8(unsigned int, unsigned char);
571 unsigned short	in16(unsigned int);
572 unsigned short	in16r(unsigned int);
573 void		out16(unsigned int, unsigned short value);
574 void		out16r(unsigned int, unsigned short value);
575 unsigned long	in32(unsigned int);
576 unsigned long	in32r(unsigned int);
577 void		out32(unsigned int, unsigned long value);
578 void		out32r(unsigned int, unsigned long value);
579 void		ppcDcbf(unsigned long value);
580 void		ppcDcbi(unsigned long value);
581 void		ppcSync(void);
582 void		ppcDcbz(unsigned long value);
583 #endif
584 #if defined (CONFIG_MICROBLAZE)
585 unsigned short	in16(unsigned int);
586 void		out16(unsigned int, unsigned short value);
587 #endif
588 
589 #if defined (CONFIG_MPC83xx)
590 void		ppcDWload(unsigned int *addr, unsigned int *ret);
591 void		ppcDWstore(unsigned int *addr, unsigned int *value);
592 void disable_addr_trans(void);
593 void enable_addr_trans(void);
594 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
595 void ddr_enable_ecc(unsigned int dram_size);
596 #endif
597 #endif
598 
599 /*
600  * Return the current value of a monotonically increasing microsecond timer.
601  * Granularity may be larger than 1us if hardware does not support this.
602  */
603 ulong timer_get_us(void);
604 
605 /* $(CPU)/cpu.c */
606 static inline int cpumask_next(int cpu, unsigned int mask)
607 {
608 	for (cpu++; !((1 << cpu) & mask); cpu++)
609 		;
610 
611 	return cpu;
612 }
613 
614 #define for_each_cpu(iter, cpu, num_cpus, mask) \
615 	for (iter = 0, cpu = cpumask_next(-1, mask); \
616 		iter < num_cpus; \
617 		iter++, cpu = cpumask_next(cpu, mask)) \
618 
619 int	cpu_numcores  (void);
620 u32	cpu_mask      (void);
621 int	is_core_valid (unsigned int);
622 int	probecpu      (void);
623 int	checkcpu      (void);
624 int	checkicache   (void);
625 int	checkdcache   (void);
626 void	upmconfig     (unsigned int, unsigned int *, unsigned int);
627 ulong	get_tbclk     (void);
628 void	reset_cpu     (ulong addr);
629 #if defined (CONFIG_OF_LIBFDT) && defined (CONFIG_OF_BOARD_SETUP)
630 void ft_cpu_setup(void *blob, bd_t *bd);
631 #ifdef CONFIG_PCI
632 void ft_pci_setup(void *blob, bd_t *bd);
633 #endif
634 #endif
635 
636 void smp_set_core_boot_addr(unsigned long addr, int corenr);
637 void smp_kick_all_cpus(void);
638 
639 /* $(CPU)/serial.c */
640 int	serial_init   (void);
641 void	serial_setbrg (void);
642 void	serial_putc   (const char);
643 void	serial_putc_raw(const char);
644 void	serial_puts   (const char *);
645 int	serial_getc   (void);
646 int	serial_tstc   (void);
647 
648 void	_serial_setbrg (const int);
649 void	_serial_putc   (const char, const int);
650 void	_serial_putc_raw(const char, const int);
651 void	_serial_puts   (const char *, const int);
652 int	_serial_getc   (const int);
653 int	_serial_tstc   (const int);
654 
655 /* $(CPU)/speed.c */
656 int	get_clocks (void);
657 int	get_clocks_866 (void);
658 int	sdram_adjust_866 (void);
659 int	adjust_sdram_tbs_8xx (void);
660 #if defined(CONFIG_8260)
661 int	prt_8260_clks (void);
662 #elif defined(CONFIG_MPC5xxx)
663 int	prt_mpc5xxx_clks (void);
664 #endif
665 #ifdef CONFIG_4xx
666 ulong	get_OPB_freq (void);
667 ulong	get_PCI_freq (void);
668 #endif
669 #if defined(CONFIG_S3C24X0) || \
670     defined(CONFIG_LH7A40X) || \
671     defined(CONFIG_EP93XX)
672 ulong	get_FCLK (void);
673 ulong	get_HCLK (void);
674 ulong	get_PCLK (void);
675 ulong	get_UCLK (void);
676 #endif
677 #if defined(CONFIG_LH7A40X)
678 ulong	get_PLLCLK (void);
679 #endif
680 #if defined CONFIG_INCA_IP
681 uint	incaip_get_cpuclk (void);
682 #endif
683 #if defined(CONFIG_IMX)
684 ulong get_systemPLLCLK(void);
685 ulong get_FCLK(void);
686 ulong get_HCLK(void);
687 ulong get_BCLK(void);
688 ulong get_PERCLK1(void);
689 ulong get_PERCLK2(void);
690 ulong get_PERCLK3(void);
691 #endif
692 ulong	get_bus_freq  (ulong);
693 int get_serial_clock(void);
694 
695 #if defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx)
696 ulong get_ddr_freq(ulong);
697 #endif
698 #if defined(CONFIG_MPC85xx)
699 typedef MPC85xx_SYS_INFO sys_info_t;
700 void	get_sys_info  ( sys_info_t * );
701 #  if defined(CONFIG_OF_LIBFDT)
702 	void ft_fixup_cpu(void *, u64);
703 	void ft_fixup_num_cores(void *);
704 #  endif
705 #endif
706 #if defined(CONFIG_MPC86xx)
707 typedef MPC86xx_SYS_INFO sys_info_t;
708 void   get_sys_info  ( sys_info_t * );
709 static inline ulong get_ddr_freq(ulong dummy)
710 {
711 	return get_bus_freq(dummy);
712 }
713 #endif
714 
715 #if defined(CONFIG_4xx)
716 #  if defined(CONFIG_440)
717 #	if defined(CONFIG_440SPE)
718 	 unsigned long determine_sysper(void);
719 	 unsigned long determine_pci_clock_per(void);
720 #	endif
721 #  endif
722 typedef PPC4xx_SYS_INFO sys_info_t;
723 int	ppc440spe_revB(void);
724 void	get_sys_info  ( sys_info_t * );
725 #endif
726 
727 /* $(CPU)/cpu_init.c */
728 #if defined(CONFIG_8xx) || defined(CONFIG_8260)
729 void	cpu_init_f    (volatile immap_t *immr);
730 #endif
731 #if defined(CONFIG_4xx) || defined(CONFIG_MPC85xx) || defined(CONFIG_MCF52x2) ||defined(CONFIG_MPC86xx)
732 void	cpu_init_f    (void);
733 #endif
734 
735 int	cpu_init_r    (void);
736 #if defined(CONFIG_8260)
737 int	prt_8260_rsr  (void);
738 #elif defined(CONFIG_MPC83xx)
739 int	prt_83xx_rsr  (void);
740 #endif
741 
742 /* $(CPU)/interrupts.c */
743 int	interrupt_init	   (void);
744 void	timer_interrupt	   (struct pt_regs *);
745 void	external_interrupt (struct pt_regs *);
746 void	irq_install_handler(int, interrupt_handler_t *, void *);
747 void	irq_free_handler   (int);
748 void	reset_timer	   (void);
749 ulong	get_timer	   (ulong base);
750 
751 /* Return value of monotonic microsecond timer */
752 unsigned long timer_get_us(void);
753 
754 void	enable_interrupts  (void);
755 int	disable_interrupts (void);
756 
757 /* $(CPU)/.../commproc.c */
758 int	dpram_init (void);
759 uint	dpram_base(void);
760 uint	dpram_base_align(uint align);
761 uint	dpram_alloc(uint size);
762 uint	dpram_alloc_align(uint size,uint align);
763 void	bootcount_store (ulong);
764 ulong	bootcount_load (void);
765 #define BOOTCOUNT_MAGIC		0xB001C041
766 
767 /* $(CPU)/.../<eth> */
768 void mii_init (void);
769 
770 /* $(CPU)/.../lcd.c */
771 ulong	lcd_setmem (ulong);
772 
773 /* $(CPU)/.../video.c */
774 ulong	video_setmem (ulong);
775 
776 /* arch/$(ARCH)/lib/cache.c */
777 void	enable_caches(void);
778 void	flush_cache   (unsigned long, unsigned long);
779 void	flush_dcache_all(void);
780 void	flush_dcache_range(unsigned long start, unsigned long stop);
781 void	invalidate_dcache_range(unsigned long start, unsigned long stop);
782 void	invalidate_dcache_all(void);
783 void	invalidate_icache_all(void);
784 
785 /* arch/$(ARCH)/lib/ticks.S */
786 unsigned long long get_ticks(void);
787 void	wait_ticks    (unsigned long);
788 
789 /* arch/$(ARCH)/lib/time.c */
790 void	__udelay      (unsigned long);
791 ulong	usec2ticks    (unsigned long usec);
792 ulong	ticks2usec    (unsigned long ticks);
793 int	init_timebase (void);
794 
795 /* lib/gunzip.c */
796 int gunzip(void *, int, unsigned char *, unsigned long *);
797 int zunzip(void *dst, int dstlen, unsigned char *src, unsigned long *lenp,
798 						int stoponerr, int offset);
799 
800 /* lib/qsort.c */
801 void qsort(void *base, size_t nmemb, size_t size,
802 	   int(*compar)(const void *, const void *));
803 int strcmp_compar(const void *, const void *);
804 
805 /* lib/time.c */
806 void	udelay        (unsigned long);
807 void mdelay(unsigned long);
808 
809 /* lib/uuid.c */
810 void uuid_str_to_bin(const char *uuid, unsigned char *out);
811 int uuid_str_valid(const char *uuid);
812 
813 /* lib/vsprintf.c */
814 #include <vsprintf.h>
815 
816 /* lib/strmhz.c */
817 char *	strmhz(char *buf, unsigned long hz);
818 
819 /* lib/crc32.c */
820 #include <u-boot/crc.h>
821 
822 /* lib/rand.c */
823 #if defined(CONFIG_RANDOM_MACADDR) || \
824 	defined(CONFIG_BOOTP_RANDOM_DELAY) || \
825 	defined(CONFIG_CMD_LINK_LOCAL)
826 #define RAND_MAX -1U
827 void srand(unsigned int seed);
828 unsigned int rand(void);
829 unsigned int rand_r(unsigned int *seedp);
830 #endif
831 
832 /* common/console.c */
833 int	console_init_f(void);	/* Before relocation; uses the serial  stuff	*/
834 int	console_init_r(void);	/* After  relocation; uses the console stuff	*/
835 int	console_assign(int file, const char *devname);	/* Assign the console	*/
836 int	ctrlc (void);
837 int	had_ctrlc (void);	/* have we had a Control-C since last clear? */
838 void	clear_ctrlc (void);	/* clear the Control-C condition */
839 int	disable_ctrlc (int);	/* 1 to disable, 0 to enable Control-C detect */
840 
841 /*
842  * STDIO based functions (can always be used)
843  */
844 /* serial stuff */
845 int	serial_printf (const char *fmt, ...)
846 		__attribute__ ((format (__printf__, 1, 2)));
847 /* stdin */
848 int	getc(void);
849 int	tstc(void);
850 
851 /* stdout */
852 void	putc(const char c);
853 void	puts(const char *s);
854 int	printf(const char *fmt, ...)
855 		__attribute__ ((format (__printf__, 1, 2)));
856 int	vprintf(const char *fmt, va_list args);
857 
858 /* stderr */
859 #define eputc(c)		fputc(stderr, c)
860 #define eputs(s)		fputs(stderr, s)
861 #define eprintf(fmt,args...)	fprintf(stderr,fmt ,##args)
862 
863 /*
864  * FILE based functions (can only be used AFTER relocation!)
865  */
866 #define stdin		0
867 #define stdout		1
868 #define stderr		2
869 #define MAX_FILES	3
870 
871 int	fprintf(int file, const char *fmt, ...)
872 		__attribute__ ((format (__printf__, 2, 3)));
873 void	fputs(int file, const char *s);
874 void	fputc(int file, const char c);
875 int	ftstc(int file);
876 int	fgetc(int file);
877 
878 /* lib/gzip.c */
879 int gzip(void *dst, unsigned long *lenp,
880 		unsigned char *src, unsigned long srclen);
881 int zzip(void *dst, unsigned long *lenp, unsigned char *src,
882 		unsigned long srclen, int stoponerr,
883 		int (*func)(unsigned long, unsigned long));
884 
885 /* lib/net_utils.c */
886 #include <net.h>
887 static inline IPaddr_t getenv_IPaddr(char *var)
888 {
889 	return string_to_ip(getenv(var));
890 }
891 
892 /*
893  * CONSOLE multiplexing.
894  */
895 #ifdef CONFIG_CONSOLE_MUX
896 #include <iomux.h>
897 #endif
898 
899 int	pcmcia_init (void);
900 
901 #ifdef CONFIG_STATUS_LED
902 # include <status_led.h>
903 #endif
904 
905 #include <bootstage.h>
906 
907 #ifdef CONFIG_SHOW_ACTIVITY
908 void show_activity(int arg);
909 #endif
910 
911 /* Multicore arch functions */
912 #ifdef CONFIG_MP
913 int cpu_status(int nr);
914 int cpu_reset(int nr);
915 int cpu_disable(int nr);
916 int cpu_release(int nr, int argc, char * const argv[]);
917 #endif
918 
919 /* Define a null map_sysmem() if the architecture doesn't use it */
920 # ifndef CONFIG_ARCH_MAP_SYSMEM
921 static inline void *map_sysmem(phys_addr_t paddr, unsigned long len)
922 {
923 	return (void *)(uintptr_t)paddr;
924 }
925 
926 static inline void unmap_sysmem(const void *vaddr)
927 {
928 }
929 
930 static inline phys_addr_t map_to_sysmem(const void *ptr)
931 {
932 	return (phys_addr_t)(uintptr_t)ptr;
933 }
934 # endif
935 
936 #endif /* __ASSEMBLY__ */
937 
938 #ifdef CONFIG_PPC
939 /*
940  * Has to be included outside of the #ifndef __ASSEMBLY__ section.
941  * Otherwise might lead to compilation errors in assembler files.
942  */
943 #include <asm/cache.h>
944 #endif
945 
946 /* Put only stuff here that the assembler can digest */
947 
948 #ifdef CONFIG_POST
949 #define CONFIG_HAS_POST
950 #ifndef CONFIG_POST_ALT_LIST
951 #define CONFIG_POST_STD_LIST
952 #endif
953 #endif
954 
955 #ifdef CONFIG_INIT_CRITICAL
956 #error CONFIG_INIT_CRITICAL is deprecated!
957 #error Read section CONFIG_SKIP_LOWLEVEL_INIT in README.
958 #endif
959 
960 #define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
961 
962 #define ROUND(a,b)		(((a) + (b) - 1) & ~((b) - 1))
963 #define DIV_ROUND(n,d)		(((n) + ((d)/2)) / (d))
964 #define DIV_ROUND_UP(n,d)	(((n) + (d) - 1) / (d))
965 #define roundup(x, y)		((((x) + ((y) - 1)) / (y)) * (y))
966 
967 #define ALIGN(x,a)		__ALIGN_MASK((x),(typeof(x))(a)-1)
968 #define __ALIGN_MASK(x,mask)	(((x)+(mask))&~(mask))
969 
970 /*
971  * ARCH_DMA_MINALIGN is defined in asm/cache.h for each architecture.  It
972  * is used to align DMA buffers.
973  */
974 #ifndef __ASSEMBLY__
975 #include <asm/cache.h>
976 #endif
977 
978 /*
979  * The ALLOC_CACHE_ALIGN_BUFFER macro is used to allocate a buffer on the
980  * stack that meets the minimum architecture alignment requirements for DMA.
981  * Such a buffer is useful for DMA operations where flushing and invalidating
982  * the cache before and after a read and/or write operation is required for
983  * correct operations.
984  *
985  * When called the macro creates an array on the stack that is sized such
986  * that:
987  *
988  * 1) The beginning of the array can be advanced enough to be aligned.
989  *
990  * 2) The size of the aligned portion of the array is a multiple of the minimum
991  *    architecture alignment required for DMA.
992  *
993  * 3) The aligned portion contains enough space for the original number of
994  *    elements requested.
995  *
996  * The macro then creates a pointer to the aligned portion of this array and
997  * assigns to the pointer the address of the first element in the aligned
998  * portion of the array.
999  *
1000  * Calling the macro as:
1001  *
1002  *     ALLOC_CACHE_ALIGN_BUFFER(uint32_t, buffer, 1024);
1003  *
1004  * Will result in something similar to saying:
1005  *
1006  *     uint32_t    buffer[1024];
1007  *
1008  * The following differences exist:
1009  *
1010  * 1) The resulting buffer is guaranteed to be aligned to the value of
1011  *    ARCH_DMA_MINALIGN.
1012  *
1013  * 2) The buffer variable created by the macro is a pointer to the specified
1014  *    type, and NOT an array of the specified type.  This can be very important
1015  *    if you want the address of the buffer, which you probably do, to pass it
1016  *    to the DMA hardware.  The value of &buffer is different in the two cases.
1017  *    In the macro case it will be the address of the pointer, not the address
1018  *    of the space reserved for the buffer.  However, in the second case it
1019  *    would be the address of the buffer.  So if you are replacing hard coded
1020  *    stack buffers with this macro you need to make sure you remove the & from
1021  *    the locations where you are taking the address of the buffer.
1022  *
1023  * Note that the size parameter is the number of array elements to allocate,
1024  * not the number of bytes.
1025  *
1026  * This macro can not be used outside of function scope, or for the creation
1027  * of a function scoped static buffer.  It can not be used to create a cache
1028  * line aligned global buffer.
1029  */
1030 #define PAD_COUNT(s, pad) (((s) - 1) / (pad) + 1)
1031 #define PAD_SIZE(s, pad) (PAD_COUNT(s, pad) * pad)
1032 #define ALLOC_ALIGN_BUFFER_PAD(type, name, size, align, pad)		\
1033 	char __##name[ROUND(PAD_SIZE((size) * sizeof(type), pad), align)  \
1034 		      + (align - 1)];					\
1035 									\
1036 	type *name = (type *) ALIGN((uintptr_t)__##name, align)
1037 #define ALLOC_ALIGN_BUFFER(type, name, size, align)		\
1038 	ALLOC_ALIGN_BUFFER_PAD(type, name, size, align, 1)
1039 #define ALLOC_CACHE_ALIGN_BUFFER_PAD(type, name, size, pad)		\
1040 	ALLOC_ALIGN_BUFFER_PAD(type, name, size, ARCH_DMA_MINALIGN, pad)
1041 #define ALLOC_CACHE_ALIGN_BUFFER(type, name, size)			\
1042 	ALLOC_ALIGN_BUFFER(type, name, size, ARCH_DMA_MINALIGN)
1043 
1044 /*
1045  * DEFINE_CACHE_ALIGN_BUFFER() is similar to ALLOC_CACHE_ALIGN_BUFFER, but it's
1046  * purpose is to allow allocating aligned buffers outside of function scope.
1047  * Usage of this macro shall be avoided or used with extreme care!
1048  */
1049 #define DEFINE_ALIGN_BUFFER(type, name, size, align)			\
1050 	static char __##name[roundup(size * sizeof(type), align)]	\
1051 			__aligned(align);				\
1052 									\
1053 	static type *name = (type *)__##name
1054 #define DEFINE_CACHE_ALIGN_BUFFER(type, name, size)			\
1055 	DEFINE_ALIGN_BUFFER(type, name, size, ARCH_DMA_MINALIGN)
1056 
1057 /* Pull in stuff for the build system */
1058 #ifdef DO_DEPS_ONLY
1059 # include <environment.h>
1060 #endif
1061 
1062 #endif	/* __COMMON_H_ */
1063