xref: /openbmc/u-boot/include/clk.h (revision cf0bcd7d)
1 /*
2  * Copyright (c) 2015 Google, Inc
3  * Written by Simon Glass <sjg@chromium.org>
4  * Copyright (c) 2016, NVIDIA CORPORATION.
5  *
6  * SPDX-License-Identifier:	GPL-2.0+
7  */
8 
9 #ifndef _CLK_H_
10 #define _CLK_H_
11 
12 #include <linux/errno.h>
13 #include <linux/types.h>
14 
15 /**
16  * A clock is a hardware signal that oscillates autonomously at a specific
17  * frequency and duty cycle. Most hardware modules require one or more clock
18  * signal to drive their operation. Clock signals are typically generated
19  * externally to the HW module consuming them, by an entity this API calls a
20  * clock provider. This API provides a standard means for drivers to enable and
21  * disable clocks, and to set the rate at which they oscillate.
22  *
23  * A driver that implements UCLASS_CLOCK is a clock provider. A provider will
24  * often implement multiple separate clocks, since the hardware it manages
25  * often has this capability. clock_uclass.h describes the interface which
26  * clock providers must implement.
27  *
28  * Clock consumers/clients are the HW modules driven by the clock signals. This
29  * header file describes the API used by drivers for those HW modules.
30  */
31 
32 struct udevice;
33 
34 /**
35  * struct clk - A handle to (allowing control of) a single clock.
36  *
37  * Clients provide storage for clock handles. The content of the structure is
38  * managed solely by the clock API and clock drivers. A clock struct is
39  * initialized by "get"ing the clock struct. The clock struct is passed to all
40  * other clock APIs to identify which clock signal to operate upon.
41  *
42  * @dev: The device which implements the clock signal.
43  * @id: The clock signal ID within the provider.
44  *
45  * Currently, the clock API assumes that a single integer ID is enough to
46  * identify and configure any clock signal for any clock provider. If this
47  * assumption becomes invalid in the future, the struct could be expanded to
48  * either (a) add more fields to allow clock providers to store additional
49  * information, or (b) replace the id field with an opaque pointer, which the
50  * provider would dynamically allocated during its .of_xlate op, and process
51  * during is .request op. This may require the addition of an extra op to clean
52  * up the allocation.
53  */
54 struct clk {
55 	struct udevice *dev;
56 	/*
57 	 * Written by of_xlate. We assume a single id is enough for now. In the
58 	 * future, we might add more fields here.
59 	 */
60 	unsigned long id;
61 };
62 
63 #if CONFIG_IS_ENABLED(OF_CONTROL) && CONFIG_IS_ENABLED(CLK)
64 struct phandle_1_arg;
65 int clk_get_by_index_platdata(struct udevice *dev, int index,
66 			      struct phandle_1_arg *cells, struct clk *clk);
67 
68 /**
69  * clock_get_by_index - Get/request a clock by integer index.
70  *
71  * This looks up and requests a clock. The index is relative to the client
72  * device; each device is assumed to have n clocks associated with it somehow,
73  * and this function finds and requests one of them. The mapping of client
74  * device clock indices to provider clocks may be via device-tree properties,
75  * board-provided mapping tables, or some other mechanism.
76  *
77  * @dev:	The client device.
78  * @index:	The index of the clock to request, within the client's list of
79  *		clocks.
80  * @clock	A pointer to a clock struct to initialize.
81  * @return 0 if OK, or a negative error code.
82  */
83 int clk_get_by_index(struct udevice *dev, int index, struct clk *clk);
84 
85 /**
86  * clock_get_by_name - Get/request a clock by name.
87  *
88  * This looks up and requests a clock. The name is relative to the client
89  * device; each device is assumed to have n clocks associated with it somehow,
90  * and this function finds and requests one of them. The mapping of client
91  * device clock names to provider clocks may be via device-tree properties,
92  * board-provided mapping tables, or some other mechanism.
93  *
94  * @dev:	The client device.
95  * @name:	The name of the clock to request, within the client's list of
96  *		clocks.
97  * @clock:	A pointer to a clock struct to initialize.
98  * @return 0 if OK, or a negative error code.
99  */
100 int clk_get_by_name(struct udevice *dev, const char *name, struct clk *clk);
101 
102 /**
103  * clk_release_all() - Disable (turn off)/Free an array of previously
104  * requested clocks.
105  *
106  * For each clock contained in the clock array, this function will check if
107  * clock has been previously requested and then will disable and free it.
108  *
109  * @clk:	A clock struct array that was previously successfully
110  *		requested by clk_request/get_by_*().
111  * @count	Number of clock contained in the array
112  * @return zero on success, or -ve error code.
113  */
114 int clk_release_all(struct clk *clk, int count);
115 
116 #else
117 static inline int clk_get_by_index(struct udevice *dev, int index,
118 				   struct clk *clk)
119 {
120 	return -ENOSYS;
121 }
122 
123 static inline int clk_get_by_name(struct udevice *dev, const char *name,
124 			   struct clk *clk)
125 {
126 	return -ENOSYS;
127 }
128 
129 static inline int clk_release_all(struct clk *clk, int count)
130 {
131 	return -ENOSYS;
132 }
133 
134 #endif
135 
136 #if (CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)) && \
137 	CONFIG_IS_ENABLED(CLK)
138 /**
139  * clk_set_defaults - Process 'assigned-{clocks/clock-parents/clock-rates}'
140  *                    properties to configure clocks
141  *
142  * @dev:        A device to process (the ofnode associated with this device
143  *              will be processed).
144  */
145 int clk_set_defaults(struct udevice *dev);
146 #else
147 static inline int clk_set_defaults(struct udevice *dev)
148 {
149 	return 0;
150 }
151 #endif
152 
153 /**
154  * clk_request - Request a clock by provider-specific ID.
155  *
156  * This requests a clock using a provider-specific ID. Generally, this function
157  * should not be used, since clk_get_by_index/name() provide an interface that
158  * better separates clients from intimate knowledge of clock providers.
159  * However, this function may be useful in core SoC-specific code.
160  *
161  * @dev:	The clock provider device.
162  * @clock:	A pointer to a clock struct to initialize. The caller must
163  *		have already initialized any field in this struct which the
164  *		clock provider uses to identify the clock.
165  * @return 0 if OK, or a negative error code.
166  */
167 int clk_request(struct udevice *dev, struct clk *clk);
168 
169 /**
170  * clock_free - Free a previously requested clock.
171  *
172  * @clock:	A clock struct that was previously successfully requested by
173  *		clk_request/get_by_*().
174  * @return 0 if OK, or a negative error code.
175  */
176 int clk_free(struct clk *clk);
177 
178 /**
179  * clk_get_rate() - Get current clock rate.
180  *
181  * @clk:	A clock struct that was previously successfully requested by
182  *		clk_request/get_by_*().
183  * @return clock rate in Hz, or -ve error code.
184  */
185 ulong clk_get_rate(struct clk *clk);
186 
187 /**
188  * clk_set_rate() - Set current clock rate.
189  *
190  * @clk:	A clock struct that was previously successfully requested by
191  *		clk_request/get_by_*().
192  * @rate:	New clock rate in Hz.
193  * @return new rate, or -ve error code.
194  */
195 ulong clk_set_rate(struct clk *clk, ulong rate);
196 
197 /**
198  * clk_set_parent() - Set current clock parent.
199  *
200  * @clk:	A clock struct that was previously successfully requested by
201  *		clk_request/get_by_*().
202  * @parent:	A clock struct that was previously successfully requested by
203  *		clk_request/get_by_*().
204  * @return new rate, or -ve error code.
205  */
206 int clk_set_parent(struct clk *clk, struct clk *parent);
207 
208 /**
209  * clk_enable() - Enable (turn on) a clock.
210  *
211  * @clk:	A clock struct that was previously successfully requested by
212  *		clk_request/get_by_*().
213  * @return zero on success, or -ve error code.
214  */
215 int clk_enable(struct clk *clk);
216 
217 /**
218  * clk_disable() - Disable (turn off) a clock.
219  *
220  * @clk:	A clock struct that was previously successfully requested by
221  *		clk_request/get_by_*().
222  * @return zero on success, or -ve error code.
223  */
224 int clk_disable(struct clk *clk);
225 
226 int soc_clk_dump(void);
227 
228 #endif
229