1 /* 2 * This file implements recording of each stage of the boot process. It is 3 * intended to implement timing of each stage, reporting this information 4 * to the user and passing it to the OS for logging / further analysis. 5 * 6 * Copyright (c) 2011 The Chromium OS Authors. 7 * 8 * SPDX-License-Identifier: GPL-2.0+ 9 */ 10 11 #ifndef _BOOTSTAGE_H 12 #define _BOOTSTAGE_H 13 14 /* The number of boot stage records available for the user */ 15 #ifndef CONFIG_BOOTSTAGE_USER_COUNT 16 #define CONFIG_BOOTSTAGE_USER_COUNT 20 17 #endif 18 19 /* Flags for each bootstage record */ 20 enum bootstage_flags { 21 BOOTSTAGEF_ERROR = 1 << 0, /* Error record */ 22 BOOTSTAGEF_ALLOC = 1 << 1, /* Allocate an id */ 23 }; 24 25 /* bootstate sub-IDs used for kernel and ramdisk ranges */ 26 enum { 27 BOOTSTAGE_SUB_FORMAT, 28 BOOTSTAGE_SUB_FORMAT_OK, 29 BOOTSTAGE_SUB_NO_UNIT_NAME, 30 BOOTSTAGE_SUB_UNIT_NAME, 31 BOOTSTAGE_SUB_SUBNODE, 32 33 BOOTSTAGE_SUB_CHECK, 34 BOOTSTAGE_SUB_HASH = 5, 35 BOOTSTAGE_SUB_CHECK_ARCH = 5, 36 BOOTSTAGE_SUB_CHECK_ALL, 37 BOOTSTAGE_SUB_GET_DATA, 38 BOOTSTAGE_SUB_CHECK_ALL_OK = 7, 39 BOOTSTAGE_SUB_GET_DATA_OK, 40 BOOTSTAGE_SUB_LOAD, 41 }; 42 43 /* 44 * A list of boot stages that we know about. Each of these indicates the 45 * state that we are at, and the action that we are about to perform. For 46 * errors, we issue an error for an item when it fails. Therefore the 47 * normal sequence is: 48 * 49 * progress action1 50 * progress action2 51 * progress action3 52 * 53 * and an error condition where action 3 failed would be: 54 * 55 * progress action1 56 * progress action2 57 * progress action3 58 * error on action3 59 */ 60 enum bootstage_id { 61 BOOTSTAGE_ID_START = 0, 62 BOOTSTAGE_ID_CHECK_MAGIC, /* Checking image magic */ 63 BOOTSTAGE_ID_CHECK_HEADER, /* Checking image header */ 64 BOOTSTAGE_ID_CHECK_CHECKSUM, /* Checking image checksum */ 65 BOOTSTAGE_ID_CHECK_ARCH, /* Checking architecture */ 66 67 BOOTSTAGE_ID_CHECK_IMAGETYPE = 5,/* Checking image type */ 68 BOOTSTAGE_ID_DECOMP_IMAGE, /* Decompressing image */ 69 BOOTSTAGE_ID_KERNEL_LOADED, /* Kernel has been loaded */ 70 BOOTSTAGE_ID_DECOMP_UNIMPL = 7, /* Odd decompression algorithm */ 71 BOOTSTAGE_ID_CHECK_BOOT_OS, /* Calling OS-specific boot function */ 72 BOOTSTAGE_ID_BOOT_OS_RETURNED, /* Tried to boot OS, but it returned */ 73 BOOTSTAGE_ID_CHECK_RAMDISK = 9, /* Checking ram disk */ 74 75 BOOTSTAGE_ID_RD_MAGIC, /* Checking ram disk magic */ 76 BOOTSTAGE_ID_RD_HDR_CHECKSUM, /* Checking ram disk heder checksum */ 77 BOOTSTAGE_ID_RD_CHECKSUM, /* Checking ram disk checksum */ 78 BOOTSTAGE_ID_COPY_RAMDISK = 12, /* Copying ram disk into place */ 79 BOOTSTAGE_ID_RAMDISK, /* Checking for valid ramdisk */ 80 BOOTSTAGE_ID_NO_RAMDISK, /* No ram disk found (not an error) */ 81 82 BOOTSTAGE_ID_RUN_OS = 15, /* Exiting U-Boot, entering OS */ 83 84 BOOTSTAGE_ID_NEED_RESET = 30, 85 BOOTSTAGE_ID_POST_FAIL, /* Post failure */ 86 BOOTSTAGE_ID_POST_FAIL_R, /* Post failure reported after reloc */ 87 88 /* 89 * This set is reported ony by x86, and the meaning is different. In 90 * this case we are reporting completion of a particular stage. 91 * This should probably change in he x86 code (which doesn't report 92 * errors in any case), but discussion this can perhaps wait until we 93 * have a generic board implementation. 94 */ 95 BOOTSTAGE_ID_BOARD_INIT_R, /* We have relocated */ 96 BOOTSTAGE_ID_BOARD_GLOBAL_DATA, /* Global data is set up */ 97 98 BOOTSTAGE_ID_BOARD_INIT_SEQ, /* We completed the init sequence */ 99 BOOTSTAGE_ID_BOARD_FLASH, /* We have configured flash banks */ 100 BOOTSTAGE_ID_BOARD_FLASH_37, /* In case you didn't hear... */ 101 BOOTSTAGE_ID_BOARD_ENV, /* Environment is relocated & ready */ 102 BOOTSTAGE_ID_BOARD_PCI, /* PCI is up */ 103 104 BOOTSTAGE_ID_BOARD_INTERRUPTS, /* Exceptions / interrupts ready */ 105 BOOTSTAGE_ID_BOARD_DONE, /* Board init done, off to main loop */ 106 /* ^^^ here ends the x86 sequence */ 107 108 /* Boot stages related to loading a kernel from an IDE device */ 109 BOOTSTAGE_ID_IDE_START = 41, 110 BOOTSTAGE_ID_IDE_ADDR, 111 BOOTSTAGE_ID_IDE_BOOT_DEVICE, 112 BOOTSTAGE_ID_IDE_TYPE, 113 114 BOOTSTAGE_ID_IDE_PART, 115 BOOTSTAGE_ID_IDE_PART_INFO, 116 BOOTSTAGE_ID_IDE_PART_TYPE, 117 BOOTSTAGE_ID_IDE_PART_READ, 118 BOOTSTAGE_ID_IDE_FORMAT, 119 120 BOOTSTAGE_ID_IDE_CHECKSUM, /* 50 */ 121 BOOTSTAGE_ID_IDE_READ, 122 123 /* Boot stages related to loading a kernel from an NAND device */ 124 BOOTSTAGE_ID_NAND_PART, 125 BOOTSTAGE_ID_NAND_SUFFIX, 126 BOOTSTAGE_ID_NAND_BOOT_DEVICE, 127 BOOTSTAGE_ID_NAND_HDR_READ = 55, 128 BOOTSTAGE_ID_NAND_AVAILABLE = 55, 129 BOOTSTAGE_ID_NAND_TYPE = 57, 130 BOOTSTAGE_ID_NAND_READ, 131 132 /* Boot stages related to loading a kernel from an network device */ 133 BOOTSTAGE_ID_NET_CHECKSUM = 60, 134 BOOTSTAGE_ID_NET_ETH_START = 64, 135 BOOTSTAGE_ID_NET_ETH_INIT, 136 137 BOOTSTAGE_ID_NET_START = 80, 138 BOOTSTAGE_ID_NET_NETLOOP_OK, 139 BOOTSTAGE_ID_NET_LOADED, 140 BOOTSTAGE_ID_NET_DONE_ERR, 141 BOOTSTAGE_ID_NET_DONE, 142 143 BOOTSTAGE_ID_FIT_FDT_START = 90, 144 /* 145 * Boot stages related to loading a FIT image. Some of these are a 146 * bit wonky. 147 */ 148 BOOTSTAGE_ID_FIT_KERNEL_START = 100, 149 150 BOOTSTAGE_ID_FIT_CONFIG = 110, 151 BOOTSTAGE_ID_FIT_TYPE, 152 BOOTSTAGE_ID_FIT_KERNEL_INFO, 153 154 BOOTSTAGE_ID_FIT_COMPRESSION, 155 BOOTSTAGE_ID_FIT_OS, 156 BOOTSTAGE_ID_FIT_LOADADDR, 157 BOOTSTAGE_ID_OVERWRITTEN, 158 159 /* Next 10 IDs used by BOOTSTAGE_SUB_... */ 160 BOOTSTAGE_ID_FIT_RD_START = 120, /* Ramdisk stages */ 161 162 /* Next 10 IDs used by BOOTSTAGE_SUB_... */ 163 BOOTSTAGE_ID_FIT_SETUP_START = 130, /* x86 setup stages */ 164 165 BOOTSTAGE_ID_IDE_FIT_READ = 140, 166 BOOTSTAGE_ID_IDE_FIT_READ_OK, 167 168 BOOTSTAGE_ID_NAND_FIT_READ = 150, 169 BOOTSTAGE_ID_NAND_FIT_READ_OK, 170 171 /* 172 * These boot stages are new, higher level, and not directly related 173 * to the old boot progress numbers. They are useful for recording 174 * rough boot timing information. 175 */ 176 BOOTSTAGE_ID_AWAKE, 177 BOOTSTAGE_ID_START_SPL, 178 BOOTSTAGE_ID_START_UBOOT_F, 179 BOOTSTAGE_ID_START_UBOOT_R, 180 BOOTSTAGE_ID_USB_START, 181 BOOTSTAGE_ID_ETH_START, 182 BOOTSTAGE_ID_BOOTP_START, 183 BOOTSTAGE_ID_BOOTP_STOP, 184 BOOTSTAGE_ID_BOOTM_START, 185 BOOTSTAGE_ID_BOOTM_HANDOFF, 186 BOOTSTAGE_ID_MAIN_LOOP, 187 BOOTSTAGE_KERNELREAD_START, 188 BOOTSTAGE_KERNELREAD_STOP, 189 BOOTSTAGE_ID_BOARD_INIT, 190 BOOTSTAGE_ID_BOARD_INIT_DONE, 191 192 BOOTSTAGE_ID_CPU_AWAKE, 193 BOOTSTAGE_ID_MAIN_CPU_AWAKE, 194 BOOTSTAGE_ID_MAIN_CPU_READY, 195 196 BOOTSTAGE_ID_ACCUM_LCD, 197 BOOTSTAGE_ID_ACCUM_SCSI, 198 199 /* a few spare for the user, from here */ 200 BOOTSTAGE_ID_USER, 201 BOOTSTAGE_ID_COUNT = BOOTSTAGE_ID_USER + CONFIG_BOOTSTAGE_USER_COUNT, 202 BOOTSTAGE_ID_ALLOC, 203 }; 204 205 /* 206 * Return the time since boot in microseconds, This is needed for bootstage 207 * and should be defined in CPU- or board-specific code. If undefined then 208 * millisecond resolution will be used (the standard get_timer()). 209 */ 210 ulong timer_get_boot_us(void); 211 212 #if !defined(CONFIG_SPL_BUILD) && !defined(USE_HOSTCC) 213 /* 214 * Board code can implement show_boot_progress() if needed. 215 * 216 * @param val Progress state (enum bootstage_id), or -id if an error 217 * has occurred. 218 */ 219 void show_boot_progress(int val); 220 #else 221 #define show_boot_progress(val) do {} while (0) 222 #endif 223 224 #if defined(CONFIG_BOOTSTAGE) && !defined(CONFIG_SPL_BUILD) && \ 225 !defined(USE_HOSTCC) 226 /* This is the full bootstage implementation */ 227 228 /** 229 * Relocate existing bootstage records 230 * 231 * Call this after relocation has happened and after malloc has been initted. 232 * We need to copy any pointers in bootstage records that were added pre- 233 * relocation, since memory can be overritten later. 234 * @return Always returns 0, to indicate success 235 */ 236 int bootstage_relocate(void); 237 238 /** 239 * Add a new bootstage record 240 * 241 * @param id Bootstage ID to use (ignored if flags & BOOTSTAGEF_ALLOC) 242 * @param name Name of record, or NULL for none 243 * @param flags Flags (BOOTSTAGEF_...) 244 * @param mark Time to record in this record, in microseconds 245 */ 246 ulong bootstage_add_record(enum bootstage_id id, const char *name, 247 int flags, ulong mark); 248 249 /* 250 * Mark a time stamp for the current boot stage. 251 */ 252 ulong bootstage_mark(enum bootstage_id id); 253 254 ulong bootstage_error(enum bootstage_id id); 255 256 ulong bootstage_mark_name(enum bootstage_id id, const char *name); 257 258 /** 259 * Mark a time stamp in the given function and line number 260 * 261 * See BOOTSTAGE_MARKER() for a convenient macro. 262 * 263 * @param file Filename to record (NULL if none) 264 * @param func Function name to record 265 * @param linenum Line number to record 266 * @return recorded time stamp 267 */ 268 ulong bootstage_mark_code(const char *file, const char *func, 269 int linenum); 270 271 /** 272 * Mark the start of a bootstage activity. The end will be marked later with 273 * bootstage_accum() and at that point we accumulate the time taken. Calling 274 * this function turns the given id into a accumulator rather than and 275 * absolute mark in time. Accumulators record the total amount of time spent 276 * in an activty during boot. 277 * 278 * @param id Bootstage id to record this timestamp against 279 * @param name Textual name to display for this id in the report (maybe NULL) 280 * @return start timestamp in microseconds 281 */ 282 uint32_t bootstage_start(enum bootstage_id id, const char *name); 283 284 /** 285 * Mark the end of a bootstage activity 286 * 287 * After previously marking the start of an activity with bootstage_start(), 288 * call this function to mark the end. You can call these functions in pairs 289 * as many times as you like. 290 * 291 * @param id Bootstage id to record this timestamp against 292 * @return time spent in this iteration of the activity (i.e. the time now 293 * less the start time recorded in the last bootstage_start() call 294 * with this id. 295 */ 296 uint32_t bootstage_accum(enum bootstage_id id); 297 298 /* Print a report about boot time */ 299 void bootstage_report(void); 300 301 /** 302 * Add bootstage information to the device tree 303 * 304 * @return 0 if ok, -ve on error 305 */ 306 int bootstage_fdt_add_report(void); 307 308 /* 309 * Stash bootstage data into memory 310 * 311 * @param base Base address of memory buffer 312 * @param size Size of memory buffer 313 * @return 0 if stashed ok, -1 if out of space 314 */ 315 int bootstage_stash(void *base, int size); 316 317 /** 318 * Read bootstage data from memory 319 * 320 * Bootstage data is read from memory and placed in the bootstage table 321 * in the user records. 322 * 323 * @param base Base address of memory buffer 324 * @param size Size of memory buffer (-1 if unknown) 325 * @return 0 if unstashed ok, -1 if bootstage info not found, or out of space 326 */ 327 int bootstage_unstash(void *base, int size); 328 329 #else 330 static inline ulong bootstage_add_record(enum bootstage_id id, 331 const char *name, int flags, ulong mark) 332 { 333 return 0; 334 } 335 336 /* 337 * This is a dummy implementation which just calls show_boot_progress(), 338 * and won't even do that unless CONFIG_SHOW_BOOT_PROGRESS is defined 339 */ 340 341 static inline int bootstage_relocate(void) 342 { 343 return 0; 344 } 345 346 static inline ulong bootstage_mark(enum bootstage_id id) 347 { 348 show_boot_progress(id); 349 return 0; 350 } 351 352 static inline ulong bootstage_error(enum bootstage_id id) 353 { 354 show_boot_progress(-id); 355 return 0; 356 } 357 358 static inline ulong bootstage_mark_name(enum bootstage_id id, const char *name) 359 { 360 show_boot_progress(id); 361 return 0; 362 } 363 364 static inline ulong bootstage_mark_code(const char *file, const char *func, 365 int linenum) 366 { 367 return 0; 368 } 369 370 static inline uint32_t bootstage_start(enum bootstage_id id, const char *name) 371 { 372 return 0; 373 } 374 375 static inline uint32_t bootstage_accum(enum bootstage_id id) 376 { 377 return 0; 378 } 379 380 static inline int bootstage_stash(void *base, int size) 381 { 382 return 0; /* Pretend to succeed */ 383 } 384 385 static inline int bootstage_unstash(void *base, int size) 386 { 387 return 0; /* Pretend to succeed */ 388 } 389 #endif /* CONFIG_BOOTSTAGE */ 390 391 /* Helper macro for adding a bootstage to a line of code */ 392 #define BOOTSTAGE_MARKER() \ 393 bootstage_mark_code(__FILE__, __func__, __LINE__) 394 395 #endif 396